* [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates
@ 2011-10-09 17:44 Thomas Petazzoni
2011-10-09 17:44 ` [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot Thomas Petazzoni
` (8 more replies)
0 siblings, 9 replies; 27+ messages in thread
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
Hello,
Changes since the last posting:
* Add Acked-by and Reviewed-by tags as given by Yann E. Morin (thanks!)
* Include comments made by Yann and Arnout on patches 8/9 and 9/9.
Thomas
The following changes since commit ddb8c639c312fd9f65dbb123837c100281495d50:
libplayer: mark python bindings as broken (2011-10-08 22:39:29 +0200)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.11/ext-toolchain-updates
Mike Frysinger (1):
toolchain: speed up sysroot lib copying
Thomas De Schampheleire (1):
toolchain-external: allow specifying extra external libraries
Thomas Petazzoni (7):
external toolchain: slightly optimize the copy of the toolchain sysroot
ext-toolchain: Add CodeSourcery SH uClinux 2011.03
ext-toolchain: Bump version of CodeSourcery MIPS 2011.03
ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03
ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09
ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery
external-toolchain: Slightly optimize toolchain extraction
toolchain/helpers.mk | 10 +-
toolchain/toolchain-external/Config.in | 157 ++++++++++++++++++++----------
toolchain/toolchain-external/ext-tool.mk | 17 +++-
3 files changed, 127 insertions(+), 57 deletions(-)
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 27+ messages in thread* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 22:00 ` Peter Korsgaard 2011-10-09 17:44 ` [Buildroot] [PATCH 2/9] toolchain-external: allow specifying extra external libraries Thomas Petazzoni ` (7 subsequent siblings) 8 siblings, 1 reply; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot The sysroot of an ARM CodeSourcery toolchain takes about 1.4 GB of space, but 1.1+ GB of this space consists in locale-related information which Buildroot doesn't use. By skipping the copy of those unused files, we save quite a bit of time while importing the toolchain sysroot. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/helpers.mk | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk index 4d90d15..7f3efaa 100644 --- a/toolchain/helpers.mk +++ b/toolchain/helpers.mk @@ -79,6 +79,9 @@ copy_toolchain_lib_root = \ # non-default architecture variant is used. Without this, the # compiler fails to find libraries and headers. # +# Note that the 'locale' directories are not copied. They are huge +# (400+MB) in CodeSourcery toolchains, and they are not really useful. +# # $1: main sysroot directory of the toolchain # $2: arch specific sysroot directory of the toolchain # $3: arch specific subdirectory in the sysroot @@ -89,7 +92,7 @@ copy_toolchain_sysroot = \ ARCH_SUBDIR="$(strip $3)"; \ for i in etc lib sbin usr ; do \ if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \ - cp -a $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \ + rsync -au --exclude 'usr/lib/locale' $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \ fi ; \ done ; \ if [ `readlink -f $${SYSROOT_DIR}` != `readlink -f $${ARCH_SYSROOT_DIR}` ] ; then \ -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot 2011-10-09 17:44 ` [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot Thomas Petazzoni @ 2011-10-09 22:00 ` Peter Korsgaard 2011-10-10 6:43 ` Thomas Petazzoni 0 siblings, 1 reply; 27+ messages in thread From: Peter Korsgaard @ 2011-10-09 22:00 UTC (permalink / raw) To: buildroot >>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: Hi, Thomas> @@ -89,7 +92,7 @@ copy_toolchain_sysroot = \ Thomas> ARCH_SUBDIR="$(strip $3)"; \ Thomas> for i in etc lib sbin usr ; do \ Thomas> if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \ Thomas> - cp -a $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \ Thomas> + rsync -au --exclude 'usr/lib/locale' $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \ FYI, this breaks on readonly source directories unless you have the new rsync 3.0.9, which most people don't. I haven't figured out a good fix for older rsync versions yet. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot 2011-10-09 22:00 ` Peter Korsgaard @ 2011-10-10 6:43 ` Thomas Petazzoni 2011-10-10 6:48 ` Thomas Petazzoni 2011-10-10 6:55 ` Peter Korsgaard 0 siblings, 2 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-10 6:43 UTC (permalink / raw) To: buildroot Le Mon, 10 Oct 2011 00:00:56 +0200, Peter Korsgaard <jacmet@uclibc.org> a ?crit : > FYI, this breaks on readonly source directories unless you have the new > rsync 3.0.9, which most people don't. I haven't figured out a good fix > for older rsync versions yet. Do you have some details ? Because: $ rsync --version | grep version rsync version 3.0.7 protocol version 30 $ ls -lR toto/ toto/: total 4 -r--r--r-- 1 thomas thomas 0 2011-10-10 08:41 b dr-xr-xr-x 2 thomas thomas 4096 2011-10-10 08:41 titi toto/titi: total 0 -r--r--r-- 1 thomas thomas 0 2011-10-10 08:41 a $ mkdir plop $ rsync -au toto/ plop/ And it works just fine. Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot 2011-10-10 6:43 ` Thomas Petazzoni @ 2011-10-10 6:48 ` Thomas Petazzoni 2011-10-10 6:55 ` Peter Korsgaard 1 sibling, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-10 6:48 UTC (permalink / raw) To: buildroot Le Mon, 10 Oct 2011 08:43:34 +0200, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> a ?crit : > $ rsync --version | grep version > rsync version 3.0.7 protocol version 30 Ok, I saw the discussion on IRC. The problem seems to be with rsync 3.0.8 only. Older versions and newer versions are unaffected. The reference discussed on IRC was: http://lists.samba.org/archive/rsync/2011-May/026369.html. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot 2011-10-10 6:43 ` Thomas Petazzoni 2011-10-10 6:48 ` Thomas Petazzoni @ 2011-10-10 6:55 ` Peter Korsgaard 1 sibling, 0 replies; 27+ messages in thread From: Peter Korsgaard @ 2011-10-10 6:55 UTC (permalink / raw) To: buildroot >>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: Thomas> Le Mon, 10 Oct 2011 00:00:56 +0200, Thomas> Peter Korsgaard <jacmet@uclibc.org> a ?crit : >> FYI, this breaks on readonly source directories unless you have the new >> rsync 3.0.9, which most people don't. I haven't figured out a good fix >> for older rsync versions yet. Thomas> Do you have some details ? Sorry, I looked wrong - I read it as if it had never worked, but it was actually a bug in 3.0.8. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 2/9] toolchain-external: allow specifying extra external libraries 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 3/9] ext-toolchain: Add CodeSourcery SH uClinux 2011.03 Thomas Petazzoni ` (6 subsequent siblings) 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot From: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com> Custom toolchains may provide extra libraries that need to be copied to the target. This patch adds a configuration option for this. Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/Config.in | 8 ++++++++ toolchain/toolchain-external/ext-tool.mk | 1 + 2 files changed, 9 insertions(+), 0 deletions(-) diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index ff7e8db..b6fa9bd 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -322,6 +322,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CXX support. If you don't know, leave the default value, Buildroot will tell you if it's correct or not. +config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS + string "Extra toolchain libraries to be copied to target" + help + If your external toolchain provides extra libraries that + need to be copied to the target filesystem, enter them + here, separated by spaces. They will be copied to the + target's /lib directory. + endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM endif # BR2_TOOLCHAIN_EXTERNAL diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index b9d932f..bac39cf 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -51,6 +51,7 @@ # of Buildroot is handled identical for the 2 toolchain types. LIB_EXTERNAL_LIBS=ld*.so libc.so libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libresolv.so librt.so libutil.so +LIB_EXTERNAL_LIBS+=$(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS)) ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y) LIB_EXTERNAL_LIBS+=libnss_files.so libnss_dns.so endif -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 3/9] ext-toolchain: Add CodeSourcery SH uClinux 2011.03 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 2/9] toolchain-external: allow specifying extra external libraries Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 4/9] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03 Thomas Petazzoni ` (5 subsequent siblings) 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/Config.in | 17 +++++++++++++++++ toolchain/toolchain-external/ext-tool.mk | 3 +++ 2 files changed, 20 insertions(+), 0 deletions(-) diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index b6fa9bd..ac712ba 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -152,6 +152,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 - SH4A, uClibc, little endian - SH4A, uClibc, big endian +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 + bool "CodeSourcery SH 2011.03" + depends on BR2_sh2a + select BR2_TOOLCHAIN_EXTERNAL_UCLIBC + select BR2_LARGEFILE + select BR2_INET_RPC + select BR2_USE_WCHAR + select BR2_TOOLCHAIN_HAS_THREADS + select BR2_INSTALL_LIBSTDCPP + help + Toolchain for the SuperH architecture, from CodeSourcery. It + uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and + kernel headers 2.6.38. It has support for + the following variants: + - SH2A, uClibc, big endian + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 bool "CodeSourcery SH 2010.09" depends on BR2_sh2a @@ -223,6 +239,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 + default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \ diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index bac39cf..48c11eb 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -191,6 +191,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar. else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y) +TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/ +TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y) TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/ TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2 -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 4/9] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (2 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 3/9] ext-toolchain: Add CodeSourcery SH uClinux 2011.03 Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 5/9] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03 Thomas Petazzoni ` (4 subsequent siblings) 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/ext-tool.mk | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index 48c11eb..c8a214d 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -180,8 +180,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y) -TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package8715/public/mips-linux-gnu/ -TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-53-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 +TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9055/public/mips-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-93-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2 -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 5/9] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (3 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 4/9] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03 Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 6/9] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09 Thomas Petazzoni ` (3 subsequent siblings) 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/Config.in | 16 ++++++++++++++++ toolchain/toolchain-external/ext-tool.mk | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index ac712ba..c50acc8 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -137,6 +137,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 - e500mc glibc, 32 bits - 970 glibc hard-float, 64 bits +config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 + bool "CodeSourcery SH 2011.03" + depends on BR2_sh4a || BR2_sh4aeb + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_INSTALL_LIBSTDCPP + help + Toolchain for the SuperH architecture, from CodeSourcery. It + uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30, + gdb 7.2.50 and kernel headers 2.6.38. It has support for + the following variants: + - SH4A, glibc, little endian + - SH4A, glibc, big endian + - SH4A, uClibc, little endian + - SH4A, uClibc, big endian + config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 bool "CodeSourcery SH 2010.09" depends on BR2_sh4a || BR2_sh4aeb @@ -238,6 +253,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 + default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index c8a214d..2662520 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -188,6 +188,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-g else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7783/public/sh-linux-gnu/ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y) +TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/superh/portal/package8759/public/sh-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2 -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 6/9] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (4 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 5/9] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03 Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 7/9] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery Thomas Petazzoni ` (2 subsequent siblings) 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/Config.in | 16 ++++++++++++++++ toolchain/toolchain-external/ext-tool.mk | 3 +++ 2 files changed, 19 insertions(+), 0 deletions(-) diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index c50acc8..9fbc224 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -199,6 +199,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 the following variants: - SH2A, uClibc, big endian +config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009 + bool "CodeSourcery x86/x86_64 2010.09" + depends on BR2_i386 || BR2_x86_64 + select BR2_TOOLCHAIN_EXTERNAL_GLIBC + select BR2_INSTALL_LIBSTDCPP + help + Toolchain for the x86/x86_64 architectures, from + CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11, + gdb 7.2.50 and kernel headers 2.6.35.2. It has support for + the following variants: + - Intel Pentium 4, glibc, 32 bits + - Intel Atom, glibc, 32 bits + - Intel Xeon, glibc, 64 bits + - Intel Core 2, glibc, 64 bits + config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 bool "Blackfin.uclinux.org 2010RC1" depends on BR2_bfin @@ -256,6 +271,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 + default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009 default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \ diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index 2662520..6e34e05 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -197,6 +197,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y) TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2 +else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009),y) +TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/ia32/portal/package7682/public/i686-pc-linux-gnu/ +TOOLCHAIN_EXTERNAL_SOURCE=ia32-2010.09-44-i686-pc-linux-gnu-i386-linux.tar.bz2 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y) TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/ TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2 -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 7/9] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (5 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 6/9] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09 Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying Thomas Petazzoni 8 siblings, 0 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Now that CodeSourcery has been bought by Mentor Graphics, the toolchains are named "Sourcery CodeBench". We rename the config short description and adjust the help text, but we keep the option name in order not to break existing configurations. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> --- toolchain/toolchain-external/Config.in | 130 ++++++++++++++++---------------- 1 files changed, 65 insertions(+), 65 deletions(-) diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in index 9fbc224..0a4b922 100644 --- a/toolchain/toolchain-external/Config.in +++ b/toolchain/toolchain-external/Config.in @@ -4,85 +4,85 @@ choice prompt "Toolchain" config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103 - bool "CodeSourcery ARM 2011.03" + bool "Sourcery CodeBench ARM 2011.03" depends on BR2_arm select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the ARM architecture, from CodeSourcery. It - uses gcc 4.5.2, binutils 2.20.51, glibc 2.13 and gdb 7.2.50, - kernel headers 2.6.38. It has support for the following - variants: + Sourcery CodeBench toolchain for the ARM architecture, from + Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc + 2.13 and gdb 7.2.50, kernel headers 2.6.38. It has support + for the following variants: - ARMv5TE, little endian, soft-float, glibc - ARMv4T, little endian, soft-float, glibc - ARMv7-A, Thumb 2, little endian, soft-float, glibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009 - bool "CodeSourcery ARM 2010.09" + bool "Sourcery CodeBench ARM 2010.09" depends on BR2_arm select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the ARM architecture, from CodeSourcery. It - uses gcc 4.5.1, binutils 2.20, glibc 2.11 and gdb 7.2.50, - kernel headers 2.6.35.2. It has support for the following - variants: + Sourcery CodeBench toolchain for the ARM architecture, from + Mentor Graphics. It uses gcc 4.5.1, binutils 2.20, glibc + 2.11 and gdb 7.2.50, kernel headers 2.6.35.2. It has support + for the following variants: - ARMv5TE, little endian, soft-float, glibc - ARMv4T, little endian, soft-float, glibc - ARMv7-A, Thumb 2, little endian, soft-float, glibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2010Q1 - bool "CodeSourcery ARM 2010q1" + bool "Sourcery CodeBench ARM 2010q1" depends on BR2_arm select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the ARM architecture, from CodeSourcery. It - uses gcc 4.4.1, binutils 2.19, glibc 2.11, gdb 7.0.50 and - kernel headers 2.6.32. It has support for the following - variants: + Sourcery CodeBench toolchain for the ARM architecture, from + Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc + 2.11, gdb 7.0.50 and kernel headers 2.6.32. It has support + for the following variants: - ARMv5T, little endian, soft-float, glibc - ARMv4T, little endian, soft-float, glibc - ARMv7-A, Thumb 2, little endian, soft-float, glibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3 - bool "CodeSourcery ARM 2009q3" + bool "Sourcery CodeBench ARM 2009q3" depends on BR2_arm select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the ARM architecture, from CodeSourcery. It - uses gcc 4.4.1, binutils 2.19, glibc 2.10 and gdb 6.8 and - kernel headers 2.6.30. It has support for the following - variants: + Sourcery CodeBench toolchain for the ARM architecture, from + Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc + 2.10 and gdb 6.8 and kernel headers 2.6.30. It has support + for the following variants: - ARMv5T, little endian, soft-float, glibc - ARMv4T, little endian, soft-float, glibc - ARMv7-A, Thumb 2, little endian, soft-float, glibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q1 - bool "CodeSourcery ARM 2009q1" + bool "Sourcery CodeBench ARM 2009q1" depends on BR2_arm select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the ARM architecture, from CodeSourcery. It - uses gcc 4.3.3, binutils 2.19, glibc 2.8 and gdb 6.8 and - kernel headers 2.6.30. It has support for the following - variants: + Sourcery CodeBench toolchain for the ARM architecture, from + Mentor Graphics. It uses gcc 4.3.3, binutils 2.19, glibc 2.8 + and gdb 6.8 and kernel headers 2.6.30. It has support for + the following variants: - ARMv5T, little endian, soft-float, glibc - ARMv4T, little endian, soft-float, glibc - ARMv7-A, Thumb 2, little endian, soft-float, glibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 - bool "CodeSourcery MIPS 2011.03" + bool "Sourcery CodeBench MIPS 2011.03" depends on BR2_mips || BR2_mipsel select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the MIPS architecture, from CodeSourcery. It - uses gcc 4.5.2, binutils 2.20.51, glibc 2.13, uClibc 0.9.30 - and gdb 7.2.50, kernel headers 2.6.38. It has support for - the following variants: + Sourcery CodeBench toolchain for the MIPS architecture, from + Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc + 2.13, uClibc 0.9.30 and gdb 7.2.50, kernel headers + 2.6.38. It has support for the following variants: - MIPS32 O32 big endian glibc - MIPS32 O32 little endian glibc - MIPS32 big endian soft float glibc @@ -97,15 +97,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103 - MIPS32 little endian soft float uclibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44 - bool "CodeSourcery MIPS 4.4" + bool "Sourcery CodeBench MIPS 4.4" depends on BR2_mips || BR2_mipsel select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the MIPS architecture, from CodeSourcery. It - uses gcc 4.4.1, binutils 2.19, glibc 2.11, uClibc 0.9.30 and - gdb 7.0, kernel headers 2.6.32. It has support for the - following variants: + Sourcery CodeBench toolchain for the MIPS architecture, from + Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc + 2.11, uClibc 0.9.30 and gdb 7.0, kernel headers 2.6.32. It + has support for the following variants: - MIPS32 O32 big endian glibc - MIPS32 O32 little endian glibc - MIPS32 big endian soft float glibc @@ -120,15 +120,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44 - MIPS32 little endian soft float uclibc config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 - bool "CodeSourcery PowerPC 2010.09" + bool "Sourcery CodeBench PowerPC 2010.09" depends on BR2_powerpc select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the PowerPC architecture, from - CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11, - gdb 7.2.50 and kernel headers 2.6.35.2. It has support for - the following variants: + Sourcery CodeBench toolchain for the PowerPC architecture, + from Sourcery CodeBench. It uses gcc 4.5.1, binutils 2.20, + glibc 2.11, gdb 7.2.50 and kernel headers 2.6.35.2. It has + support for the following variants: - 603 glibc, 32 bits - 603 soft float glibc, 32 bits - e600 altivec glibc, 32 bits @@ -138,37 +138,37 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009 - 970 glibc hard-float, 64 bits config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103 - bool "CodeSourcery SH 2011.03" + bool "Sourcery CodeBench SH 2011.03" depends on BR2_sh4a || BR2_sh4aeb select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the SuperH architecture, from CodeSourcery. It - uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30, - gdb 7.2.50 and kernel headers 2.6.38. It has support for - the following variants: + Sourcery CodeBench toolchain for the SuperH architecture, + from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20, + glibc 2.13, uClibc 0.9.30, gdb 7.2.50 and kernel headers + 2.6.38. It has support for the following variants: - SH4A, glibc, little endian - SH4A, glibc, big endian - SH4A, uClibc, little endian - SH4A, uClibc, big endian config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009 - bool "CodeSourcery SH 2010.09" + bool "Sourcery CodeBench SH 2010.09" depends on BR2_sh4a || BR2_sh4aeb select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the SuperH architecture, from CodeSourcery. It - uses gcc 4.5.1, binutils 2.20, glibc 2.11, uClibc 0.9.30, - gdb 7.2.50 and kernel headers 2.6.35.2. It has support for - the following variants: + Sourcery CodeBench toolchain for the SuperH architecture, + from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20, + glibc 2.11, uClibc 0.9.30, gdb 7.2.50 and kernel headers + 2.6.35.2. It has support for the following variants: - SH4A, glibc, little endian - SH4A, glibc, big endian - SH4A, uClibc, little endian - SH4A, uClibc, big endian config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 - bool "CodeSourcery SH 2011.03" + bool "Sourcery CodeBench SH 2011.03" depends on BR2_sh2a select BR2_TOOLCHAIN_EXTERNAL_UCLIBC select BR2_LARGEFILE @@ -177,14 +177,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103 select BR2_TOOLCHAIN_HAS_THREADS select BR2_INSTALL_LIBSTDCPP help - Toolchain for the SuperH architecture, from CodeSourcery. It - uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and - kernel headers 2.6.38. It has support for - the following variants: + Sourcery CodeBench toolchain for the SuperH architecture, + from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20, + uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.38. It has + support for the following variants: - SH2A, uClibc, big endian config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 - bool "CodeSourcery SH 2010.09" + bool "Sourcery CodeBench SH 2010.09" depends on BR2_sh2a select BR2_TOOLCHAIN_EXTERNAL_UCLIBC select BR2_LARGEFILE @@ -193,22 +193,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009 select BR2_TOOLCHAIN_HAS_THREADS select BR2_INSTALL_LIBSTDCPP help - Toolchain for the SuperH architecture, from CodeSourcery. It - uses gcc 4.5.1, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and - kernel headers 2.6.35.2. It has support for - the following variants: + Sourcery CodeBench toolchain for the SuperH architecture, + from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20, + uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.35.2. It + has support for the following variants: - SH2A, uClibc, big endian config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009 - bool "CodeSourcery x86/x86_64 2010.09" + bool "Sourcery CodeBench x86/x86_64 2010.09" depends on BR2_i386 || BR2_x86_64 select BR2_TOOLCHAIN_EXTERNAL_GLIBC select BR2_INSTALL_LIBSTDCPP help - Toolchain for the x86/x86_64 architectures, from - CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11, - gdb 7.2.50 and kernel headers 2.6.35.2. It has support for - the following variants: + Sourcery CodeBench toolchain for the x86/x86_64 + architectures, from Mentor Graphics. It uses gcc 4.5.1, + binutils 2.20, glibc 2.11, gdb 7.2.50 and kernel headers + 2.6.35.2. It has support for the following variants: - Intel Pentium 4, glibc, 32 bits - Intel Atom, glibc, 32 bits - Intel Xeon, glibc, 64 bits -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (6 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 7/9] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 21:42 ` Yann E. MORIN 2011-10-10 7:57 ` Peter Korsgaard 2011-10-09 17:44 ` [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying Thomas Petazzoni 8 siblings, 2 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot Some CodeSourcery toolchains contain a huge number of locales that are not useful, even though they account for 70-80% of the total toolchain size. By skipping the extraction of those useless locales, we make the toolchain extraction process slightly faster, and also make the output directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB with a 2010.09 ARM CodeSourcery toolchain). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- toolchain/toolchain-external/ext-tool.mk | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index 6e34e05..8287916 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -250,7 +250,8 @@ $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE): $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) mkdir -p $(@D) - $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) - + $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \ + $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(@D) $(TAR_OPTIONS) - $(Q)touch $@ endif -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction 2011-10-09 17:44 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni @ 2011-10-09 21:42 ` Yann E. MORIN 2011-10-10 7:57 ` Peter Korsgaard 1 sibling, 0 replies; 27+ messages in thread From: Yann E. MORIN @ 2011-10-09 21:42 UTC (permalink / raw) To: buildroot Thomas, All, On Sunday 09 October 2011 19:44:31 Thomas Petazzoni wrote: > Some CodeSourcery toolchains contain a huge number of locales that are > not useful, even though they account for 70-80% of the total toolchain > size. By skipping the extraction of those useless locales, we make the > toolchain extraction process slightly faster, and also make the output > directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB > with a 2010.09 ARM CodeSourcery toolchain). > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Rewviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> > --- > toolchain/toolchain-external/ext-tool.mk | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk > index 6e34e05..8287916 100644 > --- a/toolchain/toolchain-external/ext-tool.mk > +++ b/toolchain/toolchain-external/ext-tool.mk > @@ -250,7 +250,8 @@ $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE): > > $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) > mkdir -p $(@D) > - $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) - > + $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \ > + $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(@D) $(TAR_OPTIONS) - > $(Q)touch $@ > endif > > -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction 2011-10-09 17:44 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni 2011-10-09 21:42 ` Yann E. MORIN @ 2011-10-10 7:57 ` Peter Korsgaard 1 sibling, 0 replies; 27+ messages in thread From: Peter Korsgaard @ 2011-10-10 7:57 UTC (permalink / raw) To: buildroot >>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: Thomas> Some CodeSourcery toolchains contain a huge number of locales that are Thomas> not useful, even though they account for 70-80% of the total toolchain Thomas> size. By skipping the extraction of those useless locales, we make the Thomas> toolchain extraction process slightly faster, and also make the output Thomas> directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB Thomas> with a 2010.09 ARM CodeSourcery toolchain). Committed, thanks. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni ` (7 preceding siblings ...) 2011-10-09 17:44 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni @ 2011-10-09 17:44 ` Thomas Petazzoni 2011-10-09 21:46 ` Yann E. MORIN 2011-10-10 7:57 ` Peter Korsgaard 8 siblings, 2 replies; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw) To: buildroot From: Mike Frysinger <vapier@gentoo.org> The copy_toolchain_lib_root helper searches the entire sysroot, but is only interested in files in certain subdirs. So rather than waste time in walking the entire tree, walk the few subdirs at the depth level we are actually going to be poaching files from. Some simplification suggested by Yann E. MORIN <yann.morin.1998@anciens.enib.fr> and Arnout Vandecappelle <arnout@mind.be>, added by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>. Signed-off-by: Mike Frysinger <vapier@gentoo.org> --- toolchain/helpers.mk | 5 ++--- 1 files changed, 2 insertions(+), 3 deletions(-) diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk index 7f3efaa..5585f45 100644 --- a/toolchain/helpers.mk +++ b/toolchain/helpers.mk @@ -22,9 +22,8 @@ copy_toolchain_lib_root = \ DESTDIR="$(strip $3)" ; \ \ LIBS=`(cd $${ARCH_SYSROOT_DIR}; \ - find -L . -path "./lib/$${LIB}.*" -o \ - -path "./usr/lib/$${LIB}.*" -o \ - -path "./usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib*/$${LIB}.*" \ + find -L lib* usr/lib* usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib* \ + -maxdepth 1 -name "$${LIB}.*" 2>/dev/null \ )` ; \ for FILE in $${LIBS} ; do \ LIB=`basename $${FILE}`; \ -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-09 17:44 ` [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying Thomas Petazzoni @ 2011-10-09 21:46 ` Yann E. MORIN 2011-10-10 2:25 ` Mike Frysinger 2011-10-10 7:57 ` Peter Korsgaard 1 sibling, 1 reply; 27+ messages in thread From: Yann E. MORIN @ 2011-10-09 21:46 UTC (permalink / raw) To: buildroot Thomas, All, On Sunday 09 October 2011 19:44:32 Thomas Petazzoni wrote: > From: Mike Frysinger <vapier@gentoo.org> > > The copy_toolchain_lib_root helper searches the entire sysroot, but is > only interested in files in certain subdirs. So rather than waste time > in walking the entire tree, walk the few subdirs at the depth level we > are actually going to be poaching files from. > > Some simplification suggested by Yann E. MORIN > <yann.morin.1998@anciens.enib.fr> and Arnout Vandecappelle > <arnout@mind.be>, added by Thomas Petazzoni > <thomas.petazzoni@free-electrons.com>. > > Signed-off-by: Mike Frysinger <vapier@gentoo.org> Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> BTW, what's the policy when replying: should I also CC: Mike, as he's the original author, or just the person that submitted the patch? Regards, Yann E. MORIN. > --- > toolchain/helpers.mk | 5 ++--- > 1 files changed, 2 insertions(+), 3 deletions(-) > > diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk > index 7f3efaa..5585f45 100644 > --- a/toolchain/helpers.mk > +++ b/toolchain/helpers.mk > @@ -22,9 +22,8 @@ copy_toolchain_lib_root = \ > DESTDIR="$(strip $3)" ; \ > \ > LIBS=`(cd $${ARCH_SYSROOT_DIR}; \ > - find -L . -path "./lib/$${LIB}.*" -o \ > - -path "./usr/lib/$${LIB}.*" -o \ > - -path "./usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib*/$${LIB}.*" \ > + find -L lib* usr/lib* usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib* \ > + -maxdepth 1 -name "$${LIB}.*" 2>/dev/null \ > )` ; \ > for FILE in $${LIBS} ; do \ > LIB=`basename $${FILE}`; \ > -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-09 21:46 ` Yann E. MORIN @ 2011-10-10 2:25 ` Mike Frysinger 2011-10-10 6:44 ` Thomas Petazzoni 0 siblings, 1 reply; 27+ messages in thread From: Mike Frysinger @ 2011-10-10 2:25 UTC (permalink / raw) To: buildroot On Sunday 09 October 2011 17:46:21 Yann E. MORIN wrote: > On Sunday 09 October 2011 19:44:32 Thomas Petazzoni wrote: > > From: Mike Frysinger <vapier@gentoo.org> > > > > The copy_toolchain_lib_root helper searches the entire sysroot, but is > > only interested in files in certain subdirs. So rather than waste time > > in walking the entire tree, walk the few subdirs at the depth level we > > are actually going to be poaching files from. > > > > Some simplification suggested by Yann E. MORIN > > <yann.morin.1998@anciens.enib.fr> and Arnout Vandecappelle > > <arnout@mind.be>, added by Thomas Petazzoni > > <thomas.petazzoni@free-electrons.com>. > > > > Signed-off-by: Mike Frysinger <vapier@gentoo.org> > > Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr> > > BTW, what's the policy when replying: should I also CC: Mike, as he's > the original author, or just the person that submitted the patch? i'm just lurking now for buildroot as i'm not working on it anymore, but this looks fine -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20111009/b71d9123/attachment.asc> ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 2:25 ` Mike Frysinger @ 2011-10-10 6:44 ` Thomas Petazzoni 2011-10-10 15:12 ` Mike Frysinger 0 siblings, 1 reply; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-10 6:44 UTC (permalink / raw) To: buildroot Le Sun, 9 Oct 2011 22:25:40 -0400, Mike Frysinger <vapier@gentoo.org> a ?crit : > i'm just lurking now for buildroot as i'm not working on it anymore, but this > looks fine Just curious, is there any specific reason why you gave up working on Buildroot for the Blackfin architecture? Regards, Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 6:44 ` Thomas Petazzoni @ 2011-10-10 15:12 ` Mike Frysinger 2011-10-10 15:19 ` Thomas Petazzoni 0 siblings, 1 reply; 27+ messages in thread From: Mike Frysinger @ 2011-10-10 15:12 UTC (permalink / raw) To: buildroot On Monday 10 October 2011 02:44:24 Thomas Petazzoni wrote: > Le Sun, 9 Oct 2011 22:25:40 -0400, Mike Frysinger a ?crit : > > i'm just lurking now for buildroot as i'm not working on it anymore, but > > this looks fine > > Just curious, is there any specific reason why you gave up working on > Buildroot for the Blackfin architecture? i no longer work for ADI :) the people who still do are using buildroot for Blackfin, but sadly, they were (are?) not as active as i in pushing upstream -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20111010/6221bc87/attachment.asc> ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 15:12 ` Mike Frysinger @ 2011-10-10 15:19 ` Thomas Petazzoni 2011-10-10 15:22 ` Mike Frysinger 0 siblings, 1 reply; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-10 15:19 UTC (permalink / raw) To: buildroot Le Mon, 10 Oct 2011 11:12:16 -0400, Mike Frysinger <vapier@gentoo.org> a ?crit : > > Just curious, is there any specific reason why you gave up working on > > Buildroot for the Blackfin architecture? > > i no longer work for ADI :) That's a good explanation. > the people who still do are using buildroot for Blackfin, but sadly, they were > (are?) not as active as i in pushing upstream Ah, that's a shame, because your contributions were very interesting. Do those people have a public tree where we can follow their development and possibly upstream some of it ? Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 15:19 ` Thomas Petazzoni @ 2011-10-10 15:22 ` Mike Frysinger 2011-10-10 15:29 ` Thomas Petazzoni 0 siblings, 1 reply; 27+ messages in thread From: Mike Frysinger @ 2011-10-10 15:22 UTC (permalink / raw) To: buildroot On Monday 10 October 2011 11:19:19 Thomas Petazzoni wrote: > Le Mon, 10 Oct 2011 11:12:16 -0400, Mike Frysinger a ?crit : > > the people who still do are using buildroot for Blackfin, but sadly, they > > were (are?) not as active as i in pushing upstream > > Ah, that's a shame, because your contributions were very interesting. > Do those people have a public tree where we can follow their > development and possibly upstream some of it ? yes & no. it's supposed to be here: http://blackfin.uclinux.org/git/?p=buildroot but it seems they haven't published their internal development tree yet, and i obviously cannot do that for them -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20111010/cae6714b/attachment.asc> ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 15:22 ` Mike Frysinger @ 2011-10-10 15:29 ` Thomas Petazzoni 2011-10-10 15:46 ` Mike Frysinger 0 siblings, 1 reply; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-10 15:29 UTC (permalink / raw) To: buildroot Le Mon, 10 Oct 2011 11:22:48 -0400, Mike Frysinger <vapier@gentoo.org> a ?crit : > yes & no. it's supposed to be here: > http://blackfin.uclinux.org/git/?p=buildroot > > but it seems they haven't published their internal development tree yet, and i > obviously cannot do that for them Ok, too bad. Is there a way for us to have a contact in this team, so we can tell our interest in seeing their developments merged upstream? Thanks! Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-10 15:29 ` Thomas Petazzoni @ 2011-10-10 15:46 ` Mike Frysinger 0 siblings, 0 replies; 27+ messages in thread From: Mike Frysinger @ 2011-10-10 15:46 UTC (permalink / raw) To: buildroot On Monday 10 October 2011 11:29:52 Thomas Petazzoni wrote: > Le Mon, 10 Oct 2011 11:22:48 -0400, Mike Frysinger a ?crit : > > yes & no. it's supposed to be here: > > http://blackfin.uclinux.org/git/?p=buildroot > > > > but it seems they haven't published their internal development tree yet, > > and i obviously cannot do that for them > > Ok, too bad. Is there a way for us to have a contact in this team, so > we can tell our interest in seeing their developments merged upstream? uclinux-dist-devel at blackfin.uclinux.org is the general development mailing list -mike -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20111010/5a3c4b41/attachment-0001.asc> ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying 2011-10-09 17:44 ` [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying Thomas Petazzoni 2011-10-09 21:46 ` Yann E. MORIN @ 2011-10-10 7:57 ` Peter Korsgaard 1 sibling, 0 replies; 27+ messages in thread From: Peter Korsgaard @ 2011-10-10 7:57 UTC (permalink / raw) To: buildroot >>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: Thomas> From: Mike Frysinger <vapier@gentoo.org> Thomas> The copy_toolchain_lib_root helper searches the entire sysroot, but is Thomas> only interested in files in certain subdirs. So rather than waste time Thomas> in walking the entire tree, walk the few subdirs at the depth level we Thomas> are actually going to be poaching files from. Committed, thanks. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 27+ messages in thread
* [Buildroot] [pull request] Pull request for branch for-2011.11/ext-toolchain-updates
@ 2011-10-02 19:20 Thomas Petazzoni
2011-10-02 19:20 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni
0 siblings, 1 reply; 27+ messages in thread
From: Thomas Petazzoni @ 2011-10-02 19:20 UTC (permalink / raw)
To: buildroot
The following changes since commit 8511728696a298ccdb8b902b60ab398d8f67e745:
gnutls: bump to version 2.10.5 (2011-09-30 08:26:08 +0200)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.11/ext-toolchain-updates
Mike Frysinger (1):
toolchain: speed up sysroot lib copying
Thomas De Schampheleire (1):
toolchain-external: allow specifying extra external libraries
Thomas Petazzoni (7):
external toolchain: slightly optimize the copy of the toolchain sysroot
ext-toolchain: Add CodeSourcery SH uClinux 2011.03
ext-toolchain: Bump version of CodeSourcery MIPS 2011.03
ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03
ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09
ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery
external-toolchain: Slightly optimize toolchain extraction
toolchain/helpers.mk | 11 ++-
toolchain/toolchain-external/Config.in | 157 ++++++++++++++++++++----------
toolchain/toolchain-external/ext-tool.mk | 17 +++-
3 files changed, 128 insertions(+), 57 deletions(-)
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 27+ messages in thread* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction 2011-10-02 19:20 [Buildroot] [pull request] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni @ 2011-10-02 19:20 ` Thomas Petazzoni 2011-10-02 22:40 ` Yann E. MORIN 0 siblings, 1 reply; 27+ messages in thread From: Thomas Petazzoni @ 2011-10-02 19:20 UTC (permalink / raw) To: buildroot Some CodeSourcery toolchains contain a huge number of locales that are now useful, even though they account for 70-80% of the total toolchain size. By skipping the extraction of those useless locales, we make the toolchain extraction process slightly faster, and also make the output directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB with a 2010.09 ARM CodeSourcery toolchain). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- toolchain/toolchain-external/ext-tool.mk | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk index 6e34e05..8ea2813 100644 --- a/toolchain/toolchain-external/ext-tool.mk +++ b/toolchain/toolchain-external/ext-tool.mk @@ -250,7 +250,8 @@ $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE): $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) mkdir -p $(@D) - $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) - + $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \ + $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude=usr/lib/locale/* -C $(@D) $(TAR_OPTIONS) - $(Q)touch $@ endif -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction 2011-10-02 19:20 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni @ 2011-10-02 22:40 ` Yann E. MORIN 0 siblings, 0 replies; 27+ messages in thread From: Yann E. MORIN @ 2011-10-02 22:40 UTC (permalink / raw) To: buildroot Thomas, All, On Sunday 02 October 2011 21:20:16 Thomas Petazzoni wrote: > Some CodeSourcery toolchains contain a huge number of locales that are > now useful, even though they account for 70-80% of the total toolchain ^^^ You meant 'not usefull', maybe? > size. By skipping the extraction of those useless locales, we make the > toolchain extraction process slightly faster, and also make the output > directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB > with a 2010.09 ARM CodeSourcery toolchain). > > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > --- > toolchain/toolchain-external/ext-tool.mk | 3 ++- > 1 files changed, 2 insertions(+), 1 deletions(-) > > diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk > index 6e34e05..8ea2813 100644 > --- a/toolchain/toolchain-external/ext-tool.mk > +++ b/toolchain/toolchain-external/ext-tool.mk > @@ -250,7 +250,8 @@ $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE): > > $(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE) > mkdir -p $(@D) > - $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) - > + $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \ > + $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude=usr/lib/locale/* -C $(@D) $(TAR_OPTIONS) - You should quote the asterisk, we do not want it to expand in the shell, but in tar's pattern expansion. > $(Q)touch $@ > endif > Regards, Yann E. MORIN. -- .-----------------.--------------------.------------------.--------------------. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ | | +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no | | http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. | '------------------------------^-------^------------------^--------------------' ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2011-10-10 15:46 UTC | newest] Thread overview: 27+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-10-09 17:44 [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot Thomas Petazzoni 2011-10-09 22:00 ` Peter Korsgaard 2011-10-10 6:43 ` Thomas Petazzoni 2011-10-10 6:48 ` Thomas Petazzoni 2011-10-10 6:55 ` Peter Korsgaard 2011-10-09 17:44 ` [Buildroot] [PATCH 2/9] toolchain-external: allow specifying extra external libraries Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 3/9] ext-toolchain: Add CodeSourcery SH uClinux 2011.03 Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 4/9] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03 Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 5/9] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03 Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 6/9] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09 Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 7/9] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery Thomas Petazzoni 2011-10-09 17:44 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni 2011-10-09 21:42 ` Yann E. MORIN 2011-10-10 7:57 ` Peter Korsgaard 2011-10-09 17:44 ` [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying Thomas Petazzoni 2011-10-09 21:46 ` Yann E. MORIN 2011-10-10 2:25 ` Mike Frysinger 2011-10-10 6:44 ` Thomas Petazzoni 2011-10-10 15:12 ` Mike Frysinger 2011-10-10 15:19 ` Thomas Petazzoni 2011-10-10 15:22 ` Mike Frysinger 2011-10-10 15:29 ` Thomas Petazzoni 2011-10-10 15:46 ` Mike Frysinger 2011-10-10 7:57 ` Peter Korsgaard -- strict thread matches above, loose matches on Subject: below -- 2011-10-02 19:20 [Buildroot] [pull request] Pull request for branch for-2011.11/ext-toolchain-updates Thomas Petazzoni 2011-10-02 19:20 ` [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction Thomas Petazzoni 2011-10-02 22:40 ` Yann E. MORIN
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox