* [Buildroot] [PATCH v1 1/1] configs/zynq_qmtech_defconfig: deprecate board
@ 2023-11-16 13:01 Neal Frager via buildroot
2023-11-16 19:20 ` Julien Olivain
0 siblings, 1 reply; 3+ messages in thread
From: Neal Frager via buildroot @ 2023-11-16 13:01 UTC (permalink / raw)
To: buildroot, ju.o, martin.chabot, juju
Cc: luca.ceresoli, thomas.petazzoni, Neal Frager
This is a proposal to deprecate support for the zynq qmtech board. The
zynq_qmtech_defconfig has not been maintained for 3 years, and is now using
a very out of date u-boot and Linux kernel. Since there are 4 other zynq7000
defconfigs available in buildroot, do we still require support for this board?
Signed-off-by: Neal Frager <neal.frager@amd.com>
---
.checkpackageignore | 1 -
DEVELOPERS | 2 -
...0001-DTS-for-QMTech-Zynq-starter-kit.patch | 418 ------------------
board/qmtech/zynq/readme.txt | 76 ----
configs/zynq_qmtech_defconfig | 33 --
5 files changed, 530 deletions(-)
delete mode 100644 board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
delete mode 100644 board/qmtech/zynq/readme.txt
delete mode 100644 configs/zynq_qmtech_defconfig
diff --git a/.checkpackageignore b/.checkpackageignore
index 0663149d01..dd3829add6 100644
--- a/.checkpackageignore
+++ b/.checkpackageignore
@@ -76,7 +76,6 @@ board/qemu/microblazebe-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
board/qemu/microblazeel-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch Upstream
board/qemu/x86/post-build.sh Shellcheck
board/qemu/x86_64/post-build.sh Shellcheck
-board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch Upstream
board/radxa/rockpi-n8/post-build.sh Shellcheck
board/raspberrypi/post-build.sh Shellcheck
board/raspberrypi/post-image.sh Shellcheck
diff --git a/DEVELOPERS b/DEVELOPERS
index 1f26e9bc81..a42fb769d3 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -1707,14 +1707,12 @@ F: configs/ts7680_defconfig
F: package/paho-mqtt-c
N: Julien Olivain <ju.o@free.fr>
-F: board/qmtech/zynq/
F: board/spike/
F: board/technexion/imx8mmpico/
F: board/technexion/imx8mpico/
F: configs/imx8mmpico_defconfig
F: configs/imx8mpico_defconfig
F: configs/spike_riscv64_defconfig
-F: configs/zynq_qmtech_defconfig
F: package/fluid-soundfont/
F: package/fluidsynth/
F: package/glslsandbox-player/
diff --git a/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch b/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
deleted file mode 100644
index 86d8e387de..0000000000
--- a/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
+++ /dev/null
@@ -1,418 +0,0 @@
-From 22d955122ac0f7ac74ab74aadebf6b8edaf0bbbd Mon Sep 17 00:00:00 2001
-From: Julien Olivain <juju@cotds.org>
-Date: Sun, 15 Dec 2019 18:45:40 +0100
-Subject: [PATCH] DTS for QMTech Zynq starter kit
-
-Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
-Signed-off-by: Julien Olivain <juju@cotds.org>
----
- arch/arm/boot/dts/zynq-qmtech.dts | 397 ++++++++++++++++++++++++++++++
- 1 file changed, 397 insertions(+)
- create mode 100644 arch/arm/boot/dts/zynq-qmtech.dts
-
-diff --git a/arch/arm/boot/dts/zynq-qmtech.dts b/arch/arm/boot/dts/zynq-qmtech.dts
-new file mode 100644
-index 000000000000..c6081dc0080e
---- /dev/null
-+++ b/arch/arm/boot/dts/zynq-qmtech.dts
-@@ -0,0 +1,397 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Copyright (C) 2011 - 2015 Xilinx
-+ * Copyright (C) 2012 National Instruments Corp.
-+ * Copyright (C) 2019 Martin Chabot <martin.chabot@gmail.com>
-+ */
-+
-+/* Derived from:
-+ * https://github.com/Xilinx/linux-xlnx/blob/xilinx-v2019.2.01/arch/arm/boot/dts/zynq-zc702.dts
-+ */
-+
-+/dts-v1/;
-+#include "zynq-7000.dtsi"
-+
-+/ {
-+ model = "QMTECH XC7Z010 Starter Kit";
-+ compatible = "xlnx,zynq-qmtech", "xlnx,zynq-zc702", "xlnx,zynq-7000";
-+
-+ aliases {
-+ ethernet0 = &gem0;
-+ i2c0 = &i2c0;
-+ serial0 = &uart1;
-+ spi0 = &qspi;
-+ mmc0 = &sdhci0;
-+ };
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x0 0x20000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "";
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ ds23 {
-+ label = "ds23";
-+ gpios = <&gpio0 10 0>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+ };
-+
-+};
-+
-+&amba {
-+ ocm: sram@fffc0000 {
-+ compatible = "mmio-sram";
-+ reg = <0xfffc0000 0x10000>;
-+ };
-+};
-+
-+&clkc {
-+ ps-clk-frequency = <33333333>;
-+};
-+
-+&gem0 {
-+ status = "okay";
-+ phy-mode = "rgmii-id";
-+ phy-handle = <ðernet_phy>;
-+
-+ ethernet_phy: ethernet-phy@0 {
-+ reg = <0>;
-+ device_type = "ethernet-phy";
-+ };
-+};
-+
-+&gpio0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio0_default>;
-+};
-+
-+&i2c0 {
-+ status = "disabled";
-+ clock-frequency = <400000>;
-+ pinctrl-names = "default", "gpio";
-+ pinctrl-0 = <&pinctrl_i2c0_default>;
-+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
-+ scl-gpios = <&gpio0 50 0>;
-+ sda-gpios = <&gpio0 51 0>;
-+
-+ i2c-mux@74 {
-+ compatible = "nxp,pca9548";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x74>;
-+
-+ i2c@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ si570: clock-generator@5d {
-+ #clock-cells = <0>;
-+ compatible = "silabs,si570";
-+ temperature-stability = <50>;
-+ reg = <0x5d>;
-+ factory-fout = <156250000>;
-+ clock-frequency = <148500000>;
-+ };
-+ };
-+
-+ i2c@1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+ adv7511: hdmi-tx@39 {
-+ compatible = "adi,adv7511";
-+ reg = <0x39>;
-+ adi,input-depth = <8>;
-+ adi,input-colorspace = "yuv422";
-+ adi,input-clock = "1x";
-+ adi,input-style = <3>;
-+ adi,input-justification = "right";
-+ };
-+ };
-+
-+ i2c@2 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <2>;
-+ eeprom@54 {
-+ compatible = "atmel,24c08";
-+ reg = <0x54>;
-+ };
-+ };
-+
-+ i2c@3 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <3>;
-+ gpio@21 {
-+ compatible = "ti,tca6416";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+
-+ i2c@4 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <4>;
-+ rtc@51 {
-+ compatible = "nxp,pcf8563";
-+ reg = <0x51>;
-+ };
-+ };
-+
-+ i2c@7 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <7>;
-+ hwmon@52 {
-+ compatible = "ti,ucd9248";
-+ reg = <52>;
-+ };
-+ hwmon@53 {
-+ compatible = "ti,ucd9248";
-+ reg = <53>;
-+ };
-+ hwmon@54 {
-+ compatible = "ti,ucd9248";
-+ reg = <54>;
-+ };
-+ };
-+ };
-+};
-+
-+&pinctrl0 {
-+ pinctrl_can0_default: can0-default {
-+ mux {
-+ function = "can0";
-+ groups = "can0_9_grp";
-+ };
-+
-+ conf {
-+ groups = "can0_9_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+
-+ conf-rx {
-+ pins = "MIO46";
-+ bias-high-impedance;
-+ };
-+
-+ conf-tx {
-+ pins = "MIO47";
-+ bias-disable;
-+ };
-+ };
-+
-+ pinctrl_gem0_default: gem0-default {
-+ mux {
-+ function = "ethernet0";
-+ groups = "ethernet0_0_grp";
-+ };
-+
-+ conf {
-+ groups = "ethernet0_0_grp";
-+ slew-rate = <0>;
-+ io-standard = <4>;
-+ };
-+
-+ conf-rx {
-+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
-+ bias-high-impedance;
-+ low-power-disable;
-+ };
-+
-+ conf-tx {
-+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
-+ bias-disable;
-+ low-power-enable;
-+ };
-+
-+ mux-mdio {
-+ function = "mdio0";
-+ groups = "mdio0_0_grp";
-+ };
-+
-+ conf-mdio {
-+ groups = "mdio0_0_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ bias-disable;
-+ };
-+ };
-+
-+ pinctrl_gpio0_default: gpio0-default {
-+ mux {
-+ function = "gpio0";
-+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
-+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
-+ "gpio0_13_grp", "gpio0_14_grp";
-+ };
-+
-+ conf {
-+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
-+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
-+ "gpio0_13_grp", "gpio0_14_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+
-+ conf-pull-up {
-+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
-+ bias-pull-up;
-+ };
-+
-+ conf-pull-none {
-+ pins = "MIO7", "MIO8";
-+ bias-disable;
-+ };
-+ };
-+
-+ pinctrl_i2c0_default: i2c0-default {
-+ mux {
-+ groups = "i2c0_10_grp";
-+ function = "i2c0";
-+ };
-+
-+ conf {
-+ groups = "i2c0_10_grp";
-+ bias-pull-up;
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+ };
-+
-+ pinctrl_i2c0_gpio: i2c0-gpio {
-+ mux {
-+ groups = "gpio0_50_grp", "gpio0_51_grp";
-+ function = "gpio0";
-+ };
-+
-+ conf {
-+ groups = "gpio0_50_grp", "gpio0_51_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+ };
-+
-+ pinctrl_sdhci0_default: sdhci0-default {
-+ mux {
-+ groups = "sdio0_2_grp";
-+ function = "sdio0";
-+ };
-+
-+ conf {
-+ groups = "sdio0_2_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ bias-disable;
-+ };
-+
-+ mux-cd {
-+ groups = "gpio0_0_grp";
-+ function = "sdio0_cd";
-+ };
-+
-+ conf-cd {
-+ groups = "gpio0_0_grp";
-+ bias-high-impedance;
-+ bias-pull-up;
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+
-+ mux-wp {
-+ groups = "gpio0_15_grp";
-+ function = "sdio0_wp";
-+ };
-+
-+ conf-wp {
-+ groups = "gpio0_15_grp";
-+ bias-high-impedance;
-+ bias-pull-up;
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+ };
-+
-+ pinctrl_uart1_default: uart1-default {
-+ mux {
-+ groups = "uart1_10_grp";
-+ function = "uart1";
-+ };
-+
-+ conf {
-+ groups = "uart1_10_grp";
-+ slew-rate = <0>;
-+ io-standard = <1>;
-+ };
-+
-+ conf-rx {
-+ pins = "MIO25";
-+ bias-high-impedance;
-+ };
-+
-+ conf-tx {
-+ pins = "MIO24";
-+ bias-disable;
-+ };
-+ };
-+};
-+
-+&qspi {
-+ u-boot,dm-pre-reloc;
-+ status = "disabled";
-+ is-dual = <0>;
-+ num-cs = <1>;
-+ flash@0 {
-+ compatible = "n25q128a11";
-+ reg = <0x0>;
-+ spi-tx-bus-width = <1>;
-+ spi-rx-bus-width = <4>;
-+ spi-max-frequency = <50000000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ partition@qspi-fsbl-uboot {
-+ label = "qspi-fsbl-uboot";
-+ reg = <0x0 0x100000>;
-+ };
-+ partition@qspi-linux {
-+ label = "qspi-linux";
-+ reg = <0x100000 0x500000>;
-+ };
-+ partition@qspi-device-tree {
-+ label = "qspi-device-tree";
-+ reg = <0x600000 0x20000>;
-+ };
-+ partition@qspi-rootfs {
-+ label = "qspi-rootfs";
-+ reg = <0x620000 0x5E0000>;
-+ };
-+ partition@qspi-bitstream {
-+ label = "qspi-bitstream";
-+ reg = <0xC00000 0x400000>;
-+ };
-+ };
-+};
-+
-+&sdhci0 {
-+ u-boot,dm-pre-reloc;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ u-boot,dm-pre-reloc;
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1_default>;
-+};
---
-2.23.0
-
diff --git a/board/qmtech/zynq/readme.txt b/board/qmtech/zynq/readme.txt
deleted file mode 100644
index 5fb95bb90b..0000000000
--- a/board/qmtech/zynq/readme.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-*******************************
-QMTECH Zynq XC7Z010 Starter Kit
-*******************************
-
-This file documents the Buildroot support for the QMTECH [1] Zynq
-XC7Z010 Starter Kit [2]. It is a low cost (~55$) Zynq based
-development board. The board user manual is available at
-[3]. Additional files are available on Github [4].
-
-
-Build
-=====
-
-First, configure Buildroot for the QMTECH Zynq board:
-
- make zynq_qmtech_defconfig
-
-Build all components:
-
- make
-
-You will find in output/images/ the following files:
- - boot.bin
- - boot.vfat
- - devicetree.dtb
- - rootfs.cpio
- - rootfs.cpio.gz
- - rootfs.cpio.uboot
- - rootfs.tar
- - sdcard.img
- - u-boot.bin
- - u-boot.img
- - uImage
- - zynq-qmtech.dtb
-
-
-Create a bootable micro SD card
-===============================
-
-To determine the device associated to the micro SD card have a look in
-the /proc/partitions file:
-
- cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a micro SD card. Launch the following
-command as root:
-
- dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-
-Boot the QMTECH Zynq board
-==========================
-
-To boot your newly created system:
-- put a mini USB cable into the J4 Debug USB Port and connect using a
- terminal emulator at 115200 bps, 8n1,
-- put the prepared micro SD card in the J2 micro SD card slot,
-- plug the 5V power supply on the JP4 barrel jack.
-
-Enjoy!
-
-
-[1]. QMTECH:
- http://www.chinaqmtech.com/
-
-[2]. QMTECH Zynq XC7Z010 Starter Kit Product Page:
- http://www.chinaqmtech.com/xilinx_zynq_soc
-
-[3]. QMTECH Zynq XC7Z010 Starter Kit Hardware User Manual:
- http://www.chinaqmtech.com/filedownload/32552
-
-[4]. QMTECH Github:
- https://github.com/ChinaQMTECH/ZYNQ_STARTER_KIT
diff --git a/configs/zynq_qmtech_defconfig b/configs/zynq_qmtech_defconfig
deleted file mode 100644
index f536b80f57..0000000000
--- a/configs/zynq_qmtech_defconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-BR2_arm=y
-BR2_cortex_a9=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_GLOBAL_PATCH_DIR="board/qmtech/zynq/patches"
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
-BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
-BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xilinx-v2019.2.01)/linux-xilinx-v2019.2.01.tar.gz"
-BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-qmtech"
-BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_4=y
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,jolivain,u-boot-xlnx,xilinx-v2019.2.qmtech.1)/uboot-xilinx-v2019.2.qmtech.1.tar.gz"
-BR2_TARGET_UBOOT_BOARD_DEFCONFIG="zynq_qmtech"
-BR2_TARGET_UBOOT_NEEDS_DTC=y
-BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
-BR2_TARGET_UBOOT_FORMAT_IMG=y
-BR2_TARGET_UBOOT_SPL=y
-BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
-BR2_PACKAGE_HOST_DOSFSTOOLS=y
-BR2_PACKAGE_HOST_GENIMAGE=y
-BR2_PACKAGE_HOST_MTOOLS=y
--
2.25.1
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH v1 1/1] configs/zynq_qmtech_defconfig: deprecate board
2023-11-16 13:01 [Buildroot] [PATCH v1 1/1] configs/zynq_qmtech_defconfig: deprecate board Neal Frager via buildroot
@ 2023-11-16 19:20 ` Julien Olivain
2023-12-03 18:29 ` Peter Korsgaard
0 siblings, 1 reply; 3+ messages in thread
From: Julien Olivain @ 2023-11-16 19:20 UTC (permalink / raw)
To: Neal Frager
Cc: martin.chabot, luca.ceresoli, juju, thomas.petazzoni, buildroot
Hi Neal, All,
My board for this defconfig is no longer functional. It will be hard for
me to maintain it. So it can be removed now.
On 16/11/2023 14:01, Neal Frager wrote:
> This is a proposal to deprecate support for the zynq qmtech board. The
> zynq_qmtech_defconfig has not been maintained for 3 years, and is now
> using
> a very out of date u-boot and Linux kernel. Since there are 4 other
> zynq7000
> defconfigs available in buildroot, do we still require support for this
> board?
Acked-by: Julien Olivain <ju.o@free.fr>
> Signed-off-by: Neal Frager <neal.frager@amd.com>
> ---
> .checkpackageignore | 1 -
> DEVELOPERS | 2 -
> ...0001-DTS-for-QMTech-Zynq-starter-kit.patch | 418 ------------------
> board/qmtech/zynq/readme.txt | 76 ----
> configs/zynq_qmtech_defconfig | 33 --
> 5 files changed, 530 deletions(-)
> delete mode 100644
> board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
> delete mode 100644 board/qmtech/zynq/readme.txt
> delete mode 100644 configs/zynq_qmtech_defconfig
>
> diff --git a/.checkpackageignore b/.checkpackageignore
> index 0663149d01..dd3829add6 100644
> --- a/.checkpackageignore
> +++ b/.checkpackageignore
> @@ -76,7 +76,6 @@
> board/qemu/microblazebe-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
>
> board/qemu/microblazeel-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch
> Upstream
> board/qemu/x86/post-build.sh Shellcheck
> board/qemu/x86_64/post-build.sh Shellcheck
> -board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
> Upstream
> board/radxa/rockpi-n8/post-build.sh Shellcheck
> board/raspberrypi/post-build.sh Shellcheck
> board/raspberrypi/post-image.sh Shellcheck
> diff --git a/DEVELOPERS b/DEVELOPERS
> index 1f26e9bc81..a42fb769d3 100644
> --- a/DEVELOPERS
> +++ b/DEVELOPERS
> @@ -1707,14 +1707,12 @@ F: configs/ts7680_defconfig
> F: package/paho-mqtt-c
>
> N: Julien Olivain <ju.o@free.fr>
> -F: board/qmtech/zynq/
> F: board/spike/
> F: board/technexion/imx8mmpico/
> F: board/technexion/imx8mpico/
> F: configs/imx8mmpico_defconfig
> F: configs/imx8mpico_defconfig
> F: configs/spike_riscv64_defconfig
> -F: configs/zynq_qmtech_defconfig
> F: package/fluid-soundfont/
> F: package/fluidsynth/
> F: package/glslsandbox-player/
> diff --git
> a/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
> b/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
> deleted file mode 100644
> index 86d8e387de..0000000000
> ---
> a/board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch
> +++ /dev/null
> @@ -1,418 +0,0 @@
> -From 22d955122ac0f7ac74ab74aadebf6b8edaf0bbbd Mon Sep 17 00:00:00 2001
> -From: Julien Olivain <juju@cotds.org>
> -Date: Sun, 15 Dec 2019 18:45:40 +0100
> -Subject: [PATCH] DTS for QMTech Zynq starter kit
> -
> -Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
> -Signed-off-by: Julien Olivain <juju@cotds.org>
> ----
> - arch/arm/boot/dts/zynq-qmtech.dts | 397
> ++++++++++++++++++++++++++++++
> - 1 file changed, 397 insertions(+)
> - create mode 100644 arch/arm/boot/dts/zynq-qmtech.dts
> -
> -diff --git a/arch/arm/boot/dts/zynq-qmtech.dts
> b/arch/arm/boot/dts/zynq-qmtech.dts
> -new file mode 100644
> -index 000000000000..c6081dc0080e
> ---- /dev/null
> -+++ b/arch/arm/boot/dts/zynq-qmtech.dts
> -@@ -0,0 +1,397 @@
> -+// SPDX-License-Identifier: GPL-2.0+
> -+/*
> -+ * Copyright (C) 2011 - 2015 Xilinx
> -+ * Copyright (C) 2012 National Instruments Corp.
> -+ * Copyright (C) 2019 Martin Chabot <martin.chabot@gmail.com>
> -+ */
> -+
> -+/* Derived from:
> -+ *
> https://github.com/Xilinx/linux-xlnx/blob/xilinx-v2019.2.01/arch/arm/boot/dts/zynq-zc702.dts
> -+ */
> -+
> -+/dts-v1/;
> -+#include "zynq-7000.dtsi"
> -+
> -+/ {
> -+ model = "QMTECH XC7Z010 Starter Kit";
> -+ compatible = "xlnx,zynq-qmtech", "xlnx,zynq-zc702",
> "xlnx,zynq-7000";
> -+
> -+ aliases {
> -+ ethernet0 = &gem0;
> -+ i2c0 = &i2c0;
> -+ serial0 = &uart1;
> -+ spi0 = &qspi;
> -+ mmc0 = &sdhci0;
> -+ };
> -+
> -+ memory@0 {
> -+ device_type = "memory";
> -+ reg = <0x0 0x20000000>;
> -+ };
> -+
> -+ chosen {
> -+ bootargs = "";
> -+ stdout-path = "serial0:115200n8";
> -+ };
> -+
> -+ leds {
> -+ compatible = "gpio-leds";
> -+
> -+ ds23 {
> -+ label = "ds23";
> -+ gpios = <&gpio0 10 0>;
> -+ linux,default-trigger = "heartbeat";
> -+ };
> -+ };
> -+
> -+};
> -+
> -+&amba {
> -+ ocm: sram@fffc0000 {
> -+ compatible = "mmio-sram";
> -+ reg = <0xfffc0000 0x10000>;
> -+ };
> -+};
> -+
> -+&clkc {
> -+ ps-clk-frequency = <33333333>;
> -+};
> -+
> -+&gem0 {
> -+ status = "okay";
> -+ phy-mode = "rgmii-id";
> -+ phy-handle = <ðernet_phy>;
> -+
> -+ ethernet_phy: ethernet-phy@0 {
> -+ reg = <0>;
> -+ device_type = "ethernet-phy";
> -+ };
> -+};
> -+
> -+&gpio0 {
> -+ pinctrl-names = "default";
> -+ pinctrl-0 = <&pinctrl_gpio0_default>;
> -+};
> -+
> -+&i2c0 {
> -+ status = "disabled";
> -+ clock-frequency = <400000>;
> -+ pinctrl-names = "default", "gpio";
> -+ pinctrl-0 = <&pinctrl_i2c0_default>;
> -+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
> -+ scl-gpios = <&gpio0 50 0>;
> -+ sda-gpios = <&gpio0 51 0>;
> -+
> -+ i2c-mux@74 {
> -+ compatible = "nxp,pca9548";
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <0x74>;
> -+
> -+ i2c@0 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <0>;
> -+ si570: clock-generator@5d {
> -+ #clock-cells = <0>;
> -+ compatible = "silabs,si570";
> -+ temperature-stability = <50>;
> -+ reg = <0x5d>;
> -+ factory-fout = <156250000>;
> -+ clock-frequency = <148500000>;
> -+ };
> -+ };
> -+
> -+ i2c@1 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <1>;
> -+ adv7511: hdmi-tx@39 {
> -+ compatible = "adi,adv7511";
> -+ reg = <0x39>;
> -+ adi,input-depth = <8>;
> -+ adi,input-colorspace = "yuv422";
> -+ adi,input-clock = "1x";
> -+ adi,input-style = <3>;
> -+ adi,input-justification = "right";
> -+ };
> -+ };
> -+
> -+ i2c@2 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <2>;
> -+ eeprom@54 {
> -+ compatible = "atmel,24c08";
> -+ reg = <0x54>;
> -+ };
> -+ };
> -+
> -+ i2c@3 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <3>;
> -+ gpio@21 {
> -+ compatible = "ti,tca6416";
> -+ reg = <0x21>;
> -+ gpio-controller;
> -+ #gpio-cells = <2>;
> -+ };
> -+ };
> -+
> -+ i2c@4 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <4>;
> -+ rtc@51 {
> -+ compatible = "nxp,pcf8563";
> -+ reg = <0x51>;
> -+ };
> -+ };
> -+
> -+ i2c@7 {
> -+ #address-cells = <1>;
> -+ #size-cells = <0>;
> -+ reg = <7>;
> -+ hwmon@52 {
> -+ compatible = "ti,ucd9248";
> -+ reg = <52>;
> -+ };
> -+ hwmon@53 {
> -+ compatible = "ti,ucd9248";
> -+ reg = <53>;
> -+ };
> -+ hwmon@54 {
> -+ compatible = "ti,ucd9248";
> -+ reg = <54>;
> -+ };
> -+ };
> -+ };
> -+};
> -+
> -+&pinctrl0 {
> -+ pinctrl_can0_default: can0-default {
> -+ mux {
> -+ function = "can0";
> -+ groups = "can0_9_grp";
> -+ };
> -+
> -+ conf {
> -+ groups = "can0_9_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+
> -+ conf-rx {
> -+ pins = "MIO46";
> -+ bias-high-impedance;
> -+ };
> -+
> -+ conf-tx {
> -+ pins = "MIO47";
> -+ bias-disable;
> -+ };
> -+ };
> -+
> -+ pinctrl_gem0_default: gem0-default {
> -+ mux {
> -+ function = "ethernet0";
> -+ groups = "ethernet0_0_grp";
> -+ };
> -+
> -+ conf {
> -+ groups = "ethernet0_0_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <4>;
> -+ };
> -+
> -+ conf-rx {
> -+ pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
> -+ bias-high-impedance;
> -+ low-power-disable;
> -+ };
> -+
> -+ conf-tx {
> -+ pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
> -+ bias-disable;
> -+ low-power-enable;
> -+ };
> -+
> -+ mux-mdio {
> -+ function = "mdio0";
> -+ groups = "mdio0_0_grp";
> -+ };
> -+
> -+ conf-mdio {
> -+ groups = "mdio0_0_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ bias-disable;
> -+ };
> -+ };
> -+
> -+ pinctrl_gpio0_default: gpio0-default {
> -+ mux {
> -+ function = "gpio0";
> -+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> -+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> -+ "gpio0_13_grp", "gpio0_14_grp";
> -+ };
> -+
> -+ conf {
> -+ groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
> -+ "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
> -+ "gpio0_13_grp", "gpio0_14_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+
> -+ conf-pull-up {
> -+ pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
> -+ bias-pull-up;
> -+ };
> -+
> -+ conf-pull-none {
> -+ pins = "MIO7", "MIO8";
> -+ bias-disable;
> -+ };
> -+ };
> -+
> -+ pinctrl_i2c0_default: i2c0-default {
> -+ mux {
> -+ groups = "i2c0_10_grp";
> -+ function = "i2c0";
> -+ };
> -+
> -+ conf {
> -+ groups = "i2c0_10_grp";
> -+ bias-pull-up;
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+ };
> -+
> -+ pinctrl_i2c0_gpio: i2c0-gpio {
> -+ mux {
> -+ groups = "gpio0_50_grp", "gpio0_51_grp";
> -+ function = "gpio0";
> -+ };
> -+
> -+ conf {
> -+ groups = "gpio0_50_grp", "gpio0_51_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+ };
> -+
> -+ pinctrl_sdhci0_default: sdhci0-default {
> -+ mux {
> -+ groups = "sdio0_2_grp";
> -+ function = "sdio0";
> -+ };
> -+
> -+ conf {
> -+ groups = "sdio0_2_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ bias-disable;
> -+ };
> -+
> -+ mux-cd {
> -+ groups = "gpio0_0_grp";
> -+ function = "sdio0_cd";
> -+ };
> -+
> -+ conf-cd {
> -+ groups = "gpio0_0_grp";
> -+ bias-high-impedance;
> -+ bias-pull-up;
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+
> -+ mux-wp {
> -+ groups = "gpio0_15_grp";
> -+ function = "sdio0_wp";
> -+ };
> -+
> -+ conf-wp {
> -+ groups = "gpio0_15_grp";
> -+ bias-high-impedance;
> -+ bias-pull-up;
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+ };
> -+
> -+ pinctrl_uart1_default: uart1-default {
> -+ mux {
> -+ groups = "uart1_10_grp";
> -+ function = "uart1";
> -+ };
> -+
> -+ conf {
> -+ groups = "uart1_10_grp";
> -+ slew-rate = <0>;
> -+ io-standard = <1>;
> -+ };
> -+
> -+ conf-rx {
> -+ pins = "MIO25";
> -+ bias-high-impedance;
> -+ };
> -+
> -+ conf-tx {
> -+ pins = "MIO24";
> -+ bias-disable;
> -+ };
> -+ };
> -+};
> -+
> -+&qspi {
> -+ u-boot,dm-pre-reloc;
> -+ status = "disabled";
> -+ is-dual = <0>;
> -+ num-cs = <1>;
> -+ flash@0 {
> -+ compatible = "n25q128a11";
> -+ reg = <0x0>;
> -+ spi-tx-bus-width = <1>;
> -+ spi-rx-bus-width = <4>;
> -+ spi-max-frequency = <50000000>;
> -+ #address-cells = <1>;
> -+ #size-cells = <1>;
> -+ partition@qspi-fsbl-uboot {
> -+ label = "qspi-fsbl-uboot";
> -+ reg = <0x0 0x100000>;
> -+ };
> -+ partition@qspi-linux {
> -+ label = "qspi-linux";
> -+ reg = <0x100000 0x500000>;
> -+ };
> -+ partition@qspi-device-tree {
> -+ label = "qspi-device-tree";
> -+ reg = <0x600000 0x20000>;
> -+ };
> -+ partition@qspi-rootfs {
> -+ label = "qspi-rootfs";
> -+ reg = <0x620000 0x5E0000>;
> -+ };
> -+ partition@qspi-bitstream {
> -+ label = "qspi-bitstream";
> -+ reg = <0xC00000 0x400000>;
> -+ };
> -+ };
> -+};
> -+
> -+&sdhci0 {
> -+ u-boot,dm-pre-reloc;
> -+ status = "okay";
> -+};
> -+
> -+&uart1 {
> -+ u-boot,dm-pre-reloc;
> -+ status = "okay";
> -+ pinctrl-names = "default";
> -+ pinctrl-0 = <&pinctrl_uart1_default>;
> -+};
> ---
> -2.23.0
> -
> diff --git a/board/qmtech/zynq/readme.txt
> b/board/qmtech/zynq/readme.txt
> deleted file mode 100644
> index 5fb95bb90b..0000000000
> --- a/board/qmtech/zynq/readme.txt
> +++ /dev/null
> @@ -1,76 +0,0 @@
> -*******************************
> -QMTECH Zynq XC7Z010 Starter Kit
> -*******************************
> -
> -This file documents the Buildroot support for the QMTECH [1] Zynq
> -XC7Z010 Starter Kit [2]. It is a low cost (~55$) Zynq based
> -development board. The board user manual is available at
> -[3]. Additional files are available on Github [4].
> -
> -
> -Build
> -=====
> -
> -First, configure Buildroot for the QMTECH Zynq board:
> -
> - make zynq_qmtech_defconfig
> -
> -Build all components:
> -
> - make
> -
> -You will find in output/images/ the following files:
> - - boot.bin
> - - boot.vfat
> - - devicetree.dtb
> - - rootfs.cpio
> - - rootfs.cpio.gz
> - - rootfs.cpio.uboot
> - - rootfs.tar
> - - sdcard.img
> - - u-boot.bin
> - - u-boot.img
> - - uImage
> - - zynq-qmtech.dtb
> -
> -
> -Create a bootable micro SD card
> -===============================
> -
> -To determine the device associated to the micro SD card have a look in
> -the /proc/partitions file:
> -
> - cat /proc/partitions
> -
> -Buildroot prepares a bootable "sdcard.img" image in the output/images/
> -directory, ready to be dumped on a micro SD card. Launch the following
> -command as root:
> -
> - dd if=output/images/sdcard.img of=/dev/<your-sd-device>
> -
> -*** WARNING! This will destroy all the card content. Use with care!
> ***
> -
> -
> -Boot the QMTECH Zynq board
> -==========================
> -
> -To boot your newly created system:
> -- put a mini USB cable into the J4 Debug USB Port and connect using a
> - terminal emulator at 115200 bps, 8n1,
> -- put the prepared micro SD card in the J2 micro SD card slot,
> -- plug the 5V power supply on the JP4 barrel jack.
> -
> -Enjoy!
> -
> -
> -[1]. QMTECH:
> - http://www.chinaqmtech.com/
> -
> -[2]. QMTECH Zynq XC7Z010 Starter Kit Product Page:
> - http://www.chinaqmtech.com/xilinx_zynq_soc
> -
> -[3]. QMTECH Zynq XC7Z010 Starter Kit Hardware User Manual:
> - http://www.chinaqmtech.com/filedownload/32552
> -
> -[4]. QMTECH Github:
> - https://github.com/ChinaQMTECH/ZYNQ_STARTER_KIT
> diff --git a/configs/zynq_qmtech_defconfig
> b/configs/zynq_qmtech_defconfig
> deleted file mode 100644
> index f536b80f57..0000000000
> --- a/configs/zynq_qmtech_defconfig
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -BR2_arm=y
> -BR2_cortex_a9=y
> -BR2_ARM_ENABLE_NEON=y
> -BR2_ARM_ENABLE_VFP=y
> -BR2_GLOBAL_PATCH_DIR="board/qmtech/zynq/patches"
> -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_19=y
> -BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
> -BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
> -BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
> -BR2_LINUX_KERNEL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
> github,Xilinx,linux-xlnx,xilinx-v2019.2.01)/linux-xilinx-v2019.2.01.tar.gz"
> -BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
> -BR2_LINUX_KERNEL_UIMAGE=y
> -BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
> -BR2_LINUX_KERNEL_DTS_SUPPORT=y
> -BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-qmtech"
> -BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> -BR2_TARGET_ROOTFS_EXT2=y
> -BR2_TARGET_ROOTFS_EXT2_4=y
> -BR2_TARGET_UBOOT=y
> -BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
> -BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
> -BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call
> github,jolivain,u-boot-xlnx,xilinx-v2019.2.qmtech.1)/uboot-xilinx-v2019.2.qmtech.1.tar.gz"
> -BR2_TARGET_UBOOT_BOARD_DEFCONFIG="zynq_qmtech"
> -BR2_TARGET_UBOOT_NEEDS_DTC=y
> -BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
> -BR2_TARGET_UBOOT_FORMAT_IMG=y
> -BR2_TARGET_UBOOT_SPL=y
> -BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
> -BR2_PACKAGE_HOST_DOSFSTOOLS=y
> -BR2_PACKAGE_HOST_GENIMAGE=y
> -BR2_PACKAGE_HOST_MTOOLS=y
> --
> 2.25.1
Best regards,
Julien.
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Buildroot] [PATCH v1 1/1] configs/zynq_qmtech_defconfig: deprecate board
2023-11-16 19:20 ` Julien Olivain
@ 2023-12-03 18:29 ` Peter Korsgaard
0 siblings, 0 replies; 3+ messages in thread
From: Peter Korsgaard @ 2023-12-03 18:29 UTC (permalink / raw)
To: Julien Olivain
Cc: martin.chabot, Neal Frager, juju, thomas.petazzoni, buildroot,
luca.ceresoli
>>>>> "Julien" == Julien Olivain <ju.o@free.fr> writes:
> Hi Neal, All,
> My board for this defconfig is no longer functional. It will be hard for
> me to maintain it. So it can be removed now.
Ok, committed to next after rewording the commit message slightly.
--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-12-03 18:29 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-11-16 13:01 [Buildroot] [PATCH v1 1/1] configs/zynq_qmtech_defconfig: deprecate board Neal Frager via buildroot
2023-11-16 19:20 ` Julien Olivain
2023-12-03 18:29 ` Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox