* [Buildroot] [pull request] small fixes
@ 2010-09-18 12:16 llandwerlin at gmail.com
2010-09-18 12:16 ` [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG llandwerlin at gmail.com
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: llandwerlin at gmail.com @ 2010-09-18 12:16 UTC (permalink / raw)
To: buildroot
Just a few fixes for 2010.11.
Pullable at : git://git.potipota.net/buildroot small-fixes
Regards,
--
Lionel Landwerlin
^ permalink raw reply [flat|nested] 10+ messages in thread* [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG 2010-09-18 12:16 [Buildroot] [pull request] small fixes llandwerlin at gmail.com @ 2010-09-18 12:16 ` llandwerlin at gmail.com 2010-09-18 12:54 ` Thomas Petazzoni 2010-09-18 12:16 ` [Buildroot] [PATCH 2/3] zlib: Fix build llandwerlin at gmail.com 2010-09-18 12:16 ` [Buildroot] [PATCH 3/3] autotools: fix MESSAGE calls llandwerlin at gmail.com 2 siblings, 1 reply; 10+ messages in thread From: llandwerlin at gmail.com @ 2010-09-18 12:16 UTC (permalink / raw) To: buildroot From: Lionel Landwerlin <llandwerlin@gmail.com> install-exec isn't used anymore Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com> --- package/autoconf/autoconf.mk | 4 ---- package/automake/automake.mk | 4 ---- package/dbus/dbus.mk | 9 ++------- package/haserl/haserl.mk | 5 ++--- package/libtool/libtool.mk | 4 ---- package/m4/m4.mk | 4 ---- package/pkg-config/pkg-config.mk | 4 ---- package/rsync/rsync.mk | 9 ++------- package/sawman/sawman.mk | 5 ----- 9 files changed, 6 insertions(+), 42 deletions(-) diff --git a/package/autoconf/autoconf.mk b/package/autoconf/autoconf.mk index 8794466..a21192f 100644 --- a/package/autoconf/autoconf.mk +++ b/package/autoconf/autoconf.mk @@ -7,10 +7,6 @@ AUTOCONF_VERSION = 2.65 AUTOCONF_SOURCE = autoconf-$(AUTOCONF_VERSION).tar.bz2 AUTOCONF_SITE = $(BR2_GNU_MIRROR)/autoconf -ifeq ($(BR2_ENABLE_DEBUG),y) # install-exec doesn't install aclocal stuff -AUTOCONF_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -endif - AUTOCONF_CONF_ENV = EMACS="no" ac_cv_path_M4=$(HOST_DIR)/usr/bin/m4 \ ac_cv_prog_gnu_m4_gnu=no diff --git a/package/automake/automake.mk b/package/automake/automake.mk index 46bb773..a33c9f4 100644 --- a/package/automake/automake.mk +++ b/package/automake/automake.mk @@ -7,10 +7,6 @@ AUTOMAKE_VERSION = 1.10 AUTOMAKE_SOURCE = automake-$(AUTOMAKE_VERSION).tar.bz2 AUTOMAKE_SITE = $(BR2_GNU_MIRROR)/automake -ifeq ($(BR2_ENABLE_DEBUG),y) # install-exec doesn't install aclocal stuff -AUTOMAKE_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -endif - AUTOMAKE_DEPENDENCIES = host-autoconf autoconf microperl HOST_AUTOMAKE_DEPENDENCIES = host-autoconf diff --git a/package/dbus/dbus.mk b/package/dbus/dbus.mk index 141cf69..e568080 100644 --- a/package/dbus/dbus.mk +++ b/package/dbus/dbus.mk @@ -9,13 +9,6 @@ DBUS_SITE = http://dbus.freedesktop.org/releases/dbus/ DBUS_LIBTOOL_PATCH = NO DBUS_INSTALL_STAGING = YES DBUS_INSTALL_TARGET = YES -ifeq ($(BR2_ENABLE_DEBUG),y) -# install-exec doesn't install the config file -DBUS_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -else -# install-strip uses host strip -DBUS_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install-strip STRIPPROG="$(STRIPCMD)" -endif DBUS_DEPENDENCIES = host-pkg-config @@ -49,6 +42,8 @@ else DBUS_CONF_OPT += --without-x endif +DBUS_MAKE_ENV = STRIPPROG="$(STRIPCMD)" + # fix rebuild (dbus makefile errors out if /var/lib/dbus is a symlink) define DBUS_REMOVE_VAR_LIB_DBUS rm -rf $(TARGET_DIR)/var/lib/dbus diff --git a/package/haserl/haserl.mk b/package/haserl/haserl.mk index 53b5548..1fe4292 100644 --- a/package/haserl/haserl.mk +++ b/package/haserl/haserl.mk @@ -8,9 +8,6 @@ HASERL_VERSION:=$(call qstrip,$(BR2_PACKAGE_HASERL_VERSION)) HASERL_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/haserl/ HASERL_AUTORECONF:=NO HASERL_INSTALL_TARGET:=YES -ifeq ($(BR2_ENABLE_DEBUG),) -HASERL_INSTALL_TARGET_OPT:=DESTDIR=$(TARGET_DIR) STRIPPROG='$(STRIPCMD)' install-strip -endif # force haserl 0.8.0 to use install-sh so stripping works HASERL_CONF_ENV = ac_cv_path_install=./install-sh @@ -22,6 +19,8 @@ ifeq ($(BR2_PACKAGE_HASERL_WITH_LUA),y) HASERL_DEPENDENCIES += lua endif +HASERL_MAKE_ENV = STRIPPROG='$(STRIPCMD)' + define HASERL_REMOVE_EXAMPLES rm -rf $(TARGET_DIR)/usr/share/haserl endef diff --git a/package/libtool/libtool.mk b/package/libtool/libtool.mk index 4278029..a996876 100644 --- a/package/libtool/libtool.mk +++ b/package/libtool/libtool.mk @@ -7,10 +7,6 @@ LIBTOOL_VERSION = 1.5.24 LIBTOOL_SOURCE = libtool-$(LIBTOOL_VERSION).tar.gz LIBTOOL_SITE = $(BR2_GNU_MIRROR)/libtool -ifeq ($(BR2_ENABLE_DEBUG),y) # install-exec doesn't install aclocal stuff -LIBTOOL_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -endif - define HOST_LIBTOOL_CUSTOM_INSTALL install -D -m 0644 $(HOST_DIR)/usr/share/aclocal/libtool.m4 \ $(STAGING_DIR)/usr/share/aclocal/libtool.m4 diff --git a/package/m4/m4.mk b/package/m4/m4.mk index a0b56c4..7f2e333 100644 --- a/package/m4/m4.mk +++ b/package/m4/m4.mk @@ -7,10 +7,6 @@ M4_VERSION = 1.4.9 M4_SOURCE = m4-$(M4_VERSION).tar.bz2 M4_SITE = $(BR2_GNU_MIRROR)/m4 -ifeq ($(BR2_ENABLE_DEBUG),y) # no install-exec -M4_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -endif - M4_CONF_ENV = gl_cv_func_gettimeofday_clobber=no ifneq ($(BR2_USE_WCHAR),y) diff --git a/package/pkg-config/pkg-config.mk b/package/pkg-config/pkg-config.mk index 7caf37b..330b166 100644 --- a/package/pkg-config/pkg-config.mk +++ b/package/pkg-config/pkg-config.mk @@ -7,10 +7,6 @@ PKG_CONFIG_VERSION = 0.23 PKG_CONFIG_SOURCE = pkg-config-$(PKG_CONFIG_VERSION).tar.gz PKG_CONFIG_SITE = http://pkgconfig.freedesktop.org/releases/ -ifeq ($(BR2_ENABLE_DEBUG),y) # install-exec doesn't install aclocal stuff -PKG_CONFIG_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -endif - PKG_CONFIG_DEPENDENCIES = libglib2 PKG_CONFIG_CONF_OPT = --with-installed-glib diff --git a/package/rsync/rsync.mk b/package/rsync/rsync.mk index e1bb28e..2e70f7f 100644 --- a/package/rsync/rsync.mk +++ b/package/rsync/rsync.mk @@ -10,13 +10,8 @@ RSYNC_SITE:=http://rsync.samba.org/ftp/rsync/src RSYNC_INSTALL_STAGING:=NO RSYNC_INSTALL_TARGET:=YES RSYNC_CONF_OPT=$(if $(BR2_ENABLE_DEBUG),--enable-debug,--disable-debug) -ifeq ($(BR2_ENABLE_DEBUG),y) -RSYNC_INSTALL_TARGET_OPT:=DESTDIR=$(TARGET_DIR) INSTALLCMD='./install-sh -c' \ - install -else -RSYNC_INSTALL_TARGET_OPT:=DESTDIR=$(TARGET_DIR) INSTALLCMD='./install-sh -c' \ - STRIPPROG="$(TARGET_STRIP)" install-strip -endif RSYNC_CONF_OPT:=--with-included-popt +RSYNC_MAKE_ENV = STRIPPROG="$(STRIPCMD)" + $(eval $(call AUTOTARGETS,package,rsync)) diff --git a/package/sawman/sawman.mk b/package/sawman/sawman.mk index 1b53ea9..c9ec06d 100644 --- a/package/sawman/sawman.mk +++ b/package/sawman/sawman.mk @@ -9,11 +9,6 @@ SAWMAN_SITE:=http://www.directfb.org/downloads/Extras SAWMAN_INSTALL_STAGING = YES SAWMAN_INSTALL_TARGET = YES # SAWMAN_CONF_ENV = LDFLAGS="-L$(STAGING_DIR)/usr/lib -Wl,--rpath-link -Wl,$(STAGING_DIR)/usr/lib" -ifeq ($(BR2_ENABLE_DEBUG),y) -SAWMAN_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install -else -SAWMAN_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) install-strip -endif SAWMAN_DEPENDENCIES = directfb $(eval $(call AUTOTARGETS,package,sawman)) -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG 2010-09-18 12:16 ` [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG llandwerlin at gmail.com @ 2010-09-18 12:54 ` Thomas Petazzoni 0 siblings, 0 replies; 10+ messages in thread From: Thomas Petazzoni @ 2010-09-18 12:54 UTC (permalink / raw) To: buildroot Hello, On Sat, 18 Sep 2010 14:16:45 +0200 llandwerlin at gmail.com wrote: > install-exec isn't used anymore This is going to conflict with another patch I'm doing, which removes the use of install-strip when BR2_ENABLE_DEBUG is set. I'll try to merge them. Thomas -- Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 12:16 [Buildroot] [pull request] small fixes llandwerlin at gmail.com 2010-09-18 12:16 ` [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG llandwerlin at gmail.com @ 2010-09-18 12:16 ` llandwerlin at gmail.com 2010-09-18 20:13 ` Peter Korsgaard 2010-09-20 7:22 ` Peter Korsgaard 2010-09-18 12:16 ` [Buildroot] [PATCH 3/3] autotools: fix MESSAGE calls llandwerlin at gmail.com 2 siblings, 2 replies; 10+ messages in thread From: llandwerlin at gmail.com @ 2010-09-18 12:16 UTC (permalink / raw) To: buildroot From: Lionel Landwerlin <llandwerlin@gmail.com> Using "make -j $(N)" with N > 1 break zlib build. Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com> --- package/zlib/zlib.mk | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/zlib/zlib.mk b/package/zlib/zlib.mk index ad5eda7..751cfc1 100644 --- a/package/zlib/zlib.mk +++ b/package/zlib/zlib.mk @@ -42,11 +42,11 @@ define HOST_ZLIB_CONFIGURE_CMDS endef define ZLIB_BUILD_CMDS - $(MAKE) -C $(@D) all libz.a + $(MAKE1) -C $(@D) all libz.a endef define HOST_ZLIB_BUILD_CMDS - $(MAKE) -C $(@D) all libz.a + $(MAKE1) -C $(@D) all libz.a endef define ZLIB_INSTALL_STAGING_CMDS -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 12:16 ` [Buildroot] [PATCH 2/3] zlib: Fix build llandwerlin at gmail.com @ 2010-09-18 20:13 ` Peter Korsgaard 2010-09-18 20:48 ` Martin Banky 2010-09-20 7:22 ` Peter Korsgaard 1 sibling, 1 reply; 10+ messages in thread From: Peter Korsgaard @ 2010-09-18 20:13 UTC (permalink / raw) To: buildroot >>>>> "llandwerlin" == llandwerlin <llandwerlin@gmail.com> writes: llandwerlin> From: Lionel Landwerlin <llandwerlin@gmail.com> llandwerlin> Using "make -j $(N)" with N > 1 break zlib build. In what way exactly? Zlib is a pretty common package and I've never seen if breaking because of parallel builds. In fact, testing on a big (24 core) machine I don't see it either: tar jxf ~/zlib-1.2.5.tar.bz2 mv zlib-1.2.5{,-parallel} tar jxf ~/zlib-1.2.5.tar.bz2 cd zlib-1.2.5-parallel ; ./configure --prefix=/usr --shared; \ make -j 100 all libz.a; cd .. cd zlib-1.2.5 ; ./configure --prefix=/usr --shared; \ make all libz.a; cd .. Gives the same result: ls -la zlib-1.2.5*/libz.{a,so.1.2.5} -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 zlib-1.2.5/libz.a -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 zlib-1.2.5/libz.so.1.2.5 -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 zlib-1.2.5-parallel/libz.a -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 zlib-1.2.5-parallel/libz.so.1.2.5 -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 20:13 ` Peter Korsgaard @ 2010-09-18 20:48 ` Martin Banky 2010-09-18 20:59 ` Peter Korsgaard 2010-09-18 22:11 ` Lionel Landwerlin 0 siblings, 2 replies; 10+ messages in thread From: Martin Banky @ 2010-09-18 20:48 UTC (permalink / raw) To: buildroot Peter, I can confirm that it was reliably breaking for me with parallel builds. The error message would say that it couldn't find libz.a, I think during linking. I would restart the build process, and it would finish just fine after that. I wish I had known about the MAKE1 option. I guess I should have rtfm a little better. Martin On Sat, Sep 18, 2010 at 1:13 PM, Peter Korsgaard <jacmet@uclibc.org> wrote: > >>>>> "llandwerlin" == llandwerlin <llandwerlin@gmail.com> writes: > > llandwerlin> From: Lionel Landwerlin <llandwerlin@gmail.com> > llandwerlin> Using "make -j $(N)" with N > 1 break zlib build. > > In what way exactly? Zlib is a pretty common package and I've never > seen if breaking because of parallel builds. > > In fact, testing on a big (24 core) machine I don't see it either: > > tar jxf ~/zlib-1.2.5.tar.bz2 > mv zlib-1.2.5{,-parallel} > tar jxf ~/zlib-1.2.5.tar.bz2 > cd zlib-1.2.5-parallel ; ./configure --prefix=/usr --shared; \ > make -j 100 all libz.a; cd .. > cd zlib-1.2.5 ; ./configure --prefix=/usr --shared; \ > make all libz.a; cd .. > > Gives the same result: > > ls -la zlib-1.2.5*/libz.{a,so.1.2.5} > -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 zlib-1.2.5/libz.a > -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 zlib-1.2.5/libz.so.1.2.5 > -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 zlib-1.2.5-parallel/libz.a > -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 > zlib-1.2.5-parallel/libz.so.1.2.5 > > -- > Bye, Peter Korsgaard > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20100918/9f19a173/attachment.html> ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 20:48 ` Martin Banky @ 2010-09-18 20:59 ` Peter Korsgaard 2010-09-18 22:11 ` Lionel Landwerlin 1 sibling, 0 replies; 10+ messages in thread From: Peter Korsgaard @ 2010-09-18 20:59 UTC (permalink / raw) To: buildroot >>>>> "Martin" == Martin Banky <Martin.Banky@gmail.com> writes: Martin> Peter, Martin> ???? I can confirm that it was reliably breaking for me with Martin> parallel builds. The error message would say that it couldn't Martin> find libz.a, I think during linking. I would restart the build Martin> process, and it would finish just fine after that. I wish I had Martin> known about the MAKE1 option. I guess I should have rtfm a Martin> little better. Hmm, interesting. I still haven't seen it here, but OK. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 20:48 ` Martin Banky 2010-09-18 20:59 ` Peter Korsgaard @ 2010-09-18 22:11 ` Lionel Landwerlin 1 sibling, 0 replies; 10+ messages in thread From: Lionel Landwerlin @ 2010-09-18 22:11 UTC (permalink / raw) To: buildroot Hi Martin, Thanks for reporting that problem, I'm having exactly the same error. Make tries to build libz.a but he didn't finish to compile all the depending objects. After relaunching buildroot, he is able to complete the build. -- Lionel Landwerlin Le samedi 18 septembre 2010 ? 13:48 -0700, Martin Banky a ?crit : > Peter, > I can confirm that it was reliably breaking for me with parallel > builds. The error message would say that it couldn't find libz.a, I > think during linking. I would restart the build process, and it would > finish just fine after that. I wish I had known about the MAKE1 > option. I guess I should have rtfm a little better. > > Martin > > On Sat, Sep 18, 2010 at 1:13 PM, Peter Korsgaard <jacmet@uclibc.org> > wrote: > >>>>> "llandwerlin" == llandwerlin <llandwerlin@gmail.com> > writes: > > llandwerlin> From: Lionel Landwerlin <llandwerlin@gmail.com> > llandwerlin> Using "make -j $(N)" with N > 1 break zlib > build. > > In what way exactly? Zlib is a pretty common package and I've > never > seen if breaking because of parallel builds. > > In fact, testing on a big (24 core) machine I don't see it > either: > > tar jxf ~/zlib-1.2.5.tar.bz2 > mv zlib-1.2.5{,-parallel} > tar jxf ~/zlib-1.2.5.tar.bz2 > cd zlib-1.2.5-parallel ; ./configure --prefix=/usr --shared; \ > make -j 100 all libz.a; cd .. > cd zlib-1.2.5 ; ./configure --prefix=/usr --shared; \ > make all libz.a; cd .. > > Gives the same result: > > ls -la zlib-1.2.5*/libz.{a,so.1.2.5} > -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 > zlib-1.2.5/libz.a > -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 > zlib-1.2.5/libz.so.1.2.5 > -rw-r--r-- 1 peko peko 133746 2010-09-18 22:00 > zlib-1.2.5-parallel/libz.a > -rwxr-xr-x 1 peko peko 109995 2010-09-18 22:00 > zlib-1.2.5-parallel/libz.so.1.2.5 > > -- > Bye, Peter Korsgaard > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 2/3] zlib: Fix build 2010-09-18 12:16 ` [Buildroot] [PATCH 2/3] zlib: Fix build llandwerlin at gmail.com 2010-09-18 20:13 ` Peter Korsgaard @ 2010-09-20 7:22 ` Peter Korsgaard 1 sibling, 0 replies; 10+ messages in thread From: Peter Korsgaard @ 2010-09-20 7:22 UTC (permalink / raw) To: buildroot >>>>> "llandwerlin" == llandwerlin <llandwerlin@gmail.com> writes: llandwerlin> From: Lionel Landwerlin <llandwerlin@gmail.com> llandwerlin> Using "make -j $(N)" with N > 1 break zlib build. Strangely enough I saw it as well this morning - Committed, thanks! -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 10+ messages in thread
* [Buildroot] [PATCH 3/3] autotools: fix MESSAGE calls 2010-09-18 12:16 [Buildroot] [pull request] small fixes llandwerlin at gmail.com 2010-09-18 12:16 ` [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG llandwerlin at gmail.com 2010-09-18 12:16 ` [Buildroot] [PATCH 2/3] zlib: Fix build llandwerlin at gmail.com @ 2010-09-18 12:16 ` llandwerlin at gmail.com 2 siblings, 0 replies; 10+ messages in thread From: llandwerlin at gmail.com @ 2010-09-18 12:16 UTC (permalink / raw) To: buildroot From: Lionel Landwerlin <llandwerlin@gmail.com> Signed-off-by: Lionel Landwerlin <llandwerlin@gmail.com> --- package/Makefile.autotools.in | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/package/Makefile.autotools.in b/package/Makefile.autotools.in index 1ccf44c..bc813e3 100644 --- a/package/Makefile.autotools.in +++ b/package/Makefile.autotools.in @@ -142,7 +142,7 @@ $(2)_POST_PATCH_HOOKS += UPDATE_CONFIG_HOOK # Hook to patch libtool to make it work properly for cross-compilation # define LIBTOOL_PATCH_HOOK - @$(call MESSAGE,"Patching libtool") + @$$(call MESSAGE,"Patching libtool") $(Q)if test "$$($$(PKG)_LIBTOOL_PATCH)" = "YES" -a \ "$$($$(PKG)_AUTORECONF)" != "YES"; then \ for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \ @@ -160,7 +160,7 @@ endif # Hook to autoreconf the package if needed # define AUTORECONF_HOOK - @$(call MESSAGE,"Autoreconfiguring") + @$$(call MESSAGE,"Autoreconfiguring") $(Q)cd $$($$(PKG)_SRCDIR) && $(AUTORECONF) $$($$(PKG)_AUTORECONF_OPT) $(Q)if test "$($$(PKG)_LIBTOOL_PATCH)" = "YES"; then \ for i in `find $$($$(PKG)_SRCDIR) -name ltmain.sh`; do \ -- 1.7.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-09-20 7:22 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-09-18 12:16 [Buildroot] [pull request] small fixes llandwerlin at gmail.com 2010-09-18 12:16 ` [Buildroot] [PATCH 1/3] package: drop special case for target-install with BR2_ENABLE_DEBUG llandwerlin at gmail.com 2010-09-18 12:54 ` Thomas Petazzoni 2010-09-18 12:16 ` [Buildroot] [PATCH 2/3] zlib: Fix build llandwerlin at gmail.com 2010-09-18 20:13 ` Peter Korsgaard 2010-09-18 20:48 ` Martin Banky 2010-09-18 20:59 ` Peter Korsgaard 2010-09-18 22:11 ` Lionel Landwerlin 2010-09-20 7:22 ` Peter Korsgaard 2010-09-18 12:16 ` [Buildroot] [PATCH 3/3] autotools: fix MESSAGE calls llandwerlin at gmail.com
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox