* [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling)
@ 2012-02-07 20:51 Thomas De Schampheleire
2012-02-07 22:31 ` Peter Korsgaard
0 siblings, 1 reply; 5+ messages in thread
From: Thomas De Schampheleire @ 2012-02-07 20:51 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
---
package/Config.in | 1 +
package/dstat/Config.in | 19 +++++++++++++++++++
package/dstat/dstat.mk | 15 +++++++++++++++
3 files changed, 35 insertions(+), 0 deletions(-)
v2: reduce parameters to GENTARGETS
diff --git a/package/Config.in b/package/Config.in
--- a/package/Config.in
+++ b/package/Config.in
@@ -19,6 +19,7 @@ endmenu
menu "Debugging, profiling and benchmark"
source "package/bonnie/Config.in"
source "package/dhrystone/Config.in"
+source "package/dstat/Config.in"
source "package/dmalloc/Config.in"
source "package/kexec/Config.in"
source "package/lmbench/Config.in"
diff --git a/package/dstat/Config.in b/package/dstat/Config.in
new file mode 100644
--- /dev/null
+++ b/package/dstat/Config.in
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_DSTAT
+ bool "dstat"
+ select BR2_PACKAGE_PYTHON
+ help
+ Dstat, written in Python, is a versatile replacement for vmstat,
+ iostat, netstat and ifstat. Dstat overcomes some of their limitations
+ and adds some extra features, more counters and flexibility. Dstat is
+ handy for monitoring systems during performance tuning tests,
+ benchmarks or troubleshooting.
+ Dstat allows you to view all of your system resources in real-time,
+ you can e.g. compare disk utilization in combination with interrupts
+ from your IDE controller, or compare the network bandwidth numbers
+ directly with the disk throughput (in the same interval).
+
+ Note that to get proper output, your terminal size should be known by
+ the termios subsystem. This can be done by running the 'resize'
+ utility of busybox.
+
+ http://dag.wieers.com/home-made/dstat/
diff --git a/package/dstat/dstat.mk b/package/dstat/dstat.mk
new file mode 100644
--- /dev/null
+++ b/package/dstat/dstat.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# dstat
+#
+#############################################################
+
+DSTAT_VERSION = 0.7.2
+DSTAT_SOURCE = dstat-$(DSTAT_VERSION).tar.bz2
+DSTAT_SITE = http://dag.wieers.com/home-made/dstat
+
+define DSTAT_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(call GENTARGETS))
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling)
2012-02-07 20:51 [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling) Thomas De Schampheleire
@ 2012-02-07 22:31 ` Peter Korsgaard
0 siblings, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2012-02-07 22:31 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com> writes:
Thomas> Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Thomas> ---
Thomas> package/Config.in | 1 +
Thomas> package/dstat/Config.in | 19 +++++++++++++++++++
Thomas> package/dstat/dstat.mk | 15 +++++++++++++++
Thomas> 3 files changed, 35 insertions(+), 0 deletions(-)
Thomas> v2: reduce parameters to GENTARGETS
Thomas> diff --git a/package/Config.in b/package/Config.in
Thomas> --- a/package/Config.in
Thomas> +++ b/package/Config.in
Thomas> @@ -19,6 +19,7 @@ endmenu
Thomas> menu "Debugging, profiling and benchmark"
Thomas> source "package/bonnie/Config.in"
Thomas> source "package/dhrystone/Config.in"
Thomas> +source "package/dstat/Config.in"
Thomas> source "package/dmalloc/Config.in"
Thomas> source "package/kexec/Config.in"
Thomas> source "package/lmbench/Config.in"
Thomas> diff --git a/package/dstat/Config.in b/package/dstat/Config.in
Thomas> new file mode 100644
Thomas> --- /dev/null
Thomas> +++ b/package/dstat/Config.in
Thomas> @@ -0,0 +1,19 @@
Thomas> +config BR2_PACKAGE_DSTAT
Thomas> + bool "dstat"
Thomas> + select BR2_PACKAGE_PYTHON
Python needs WCHAR, so you need to depend on it as well.
Otherwise it looks good - Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling)
@ 2012-02-06 20:48 Thomas De Schampheleire
2012-02-07 19:20 ` Thomas Petazzoni
0 siblings, 1 reply; 5+ messages in thread
From: Thomas De Schampheleire @ 2012-02-06 20:48 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
---
package/Config.in | 1 +
package/dstat/Config.in | 19 +++++++++++++++++++
package/dstat/dstat.mk | 15 +++++++++++++++
3 files changed, 35 insertions(+), 0 deletions(-)
diff --git a/package/Config.in b/package/Config.in
--- a/package/Config.in
+++ b/package/Config.in
@@ -19,6 +19,7 @@ endmenu
menu "Debugging, profiling and benchmark"
source "package/bonnie/Config.in"
source "package/dhrystone/Config.in"
+source "package/dstat/Config.in"
source "package/dmalloc/Config.in"
source "package/kexec/Config.in"
source "package/lmbench/Config.in"
diff --git a/package/dstat/Config.in b/package/dstat/Config.in
new file mode 100644
--- /dev/null
+++ b/package/dstat/Config.in
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_DSTAT
+ bool "dstat"
+ select BR2_PACKAGE_PYTHON
+ help
+ Dstat, written in Python, is a versatile replacement for vmstat,
+ iostat, netstat and ifstat. Dstat overcomes some of their limitations
+ and adds some extra features, more counters and flexibility. Dstat is
+ handy for monitoring systems during performance tuning tests,
+ benchmarks or troubleshooting.
+ Dstat allows you to view all of your system resources in real-time,
+ you can e.g. compare disk utilization in combination with interrupts
+ from your IDE controller, or compare the network bandwidth numbers
+ directly with the disk throughput (in the same interval).
+
+ Note that to get proper output, your terminal size should be known by
+ the termios subsystem. This can be done by running the 'resize'
+ utility of busybox.
+
+ http://dag.wieers.com/home-made/dstat/
diff --git a/package/dstat/dstat.mk b/package/dstat/dstat.mk
new file mode 100644
--- /dev/null
+++ b/package/dstat/dstat.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# dstat
+#
+#############################################################
+
+DSTAT_VERSION = 0.7.2
+DSTAT_SOURCE = dstat-$(DSTAT_VERSION).tar.bz2
+DSTAT_SITE = http://dag.wieers.com/home-made/dstat
+
+define DSTAT_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(call GENTARGETS,package,dstat))
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling)
2012-02-06 20:48 Thomas De Schampheleire
@ 2012-02-07 19:20 ` Thomas Petazzoni
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Petazzoni @ 2012-02-07 19:20 UTC (permalink / raw)
To: buildroot
Le Mon, 06 Feb 2012 21:48:31 +0100,
Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com> a ?crit :
> +$(eval $(call GENTARGETS,package,dstat))
$(eval $(call GENTARGETS)) is sufficient.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling)
@ 2011-10-19 7:35 Thomas De Schampheleire
0 siblings, 0 replies; 5+ messages in thread
From: Thomas De Schampheleire @ 2011-10-19 7:35 UTC (permalink / raw)
To: buildroot
diff --git a/package/Config.in b/package/Config.in
--- a/package/Config.in
+++ b/package/Config.in
@@ -19,6 +19,7 @@ endmenu
menu "Debugging, profiling and benchmark"
source "package/bonnie/Config.in"
source "package/dhrystone/Config.in"
+source "package/dstat/Config.in"
source "package/dmalloc/Config.in"
source "package/kexec/Config.in"
source "package/lmbench/Config.in"
diff --git a/package/dstat/Config.in b/package/dstat/Config.in
new file mode 100644
--- /dev/null
+++ b/package/dstat/Config.in
@@ -0,0 +1,19 @@
+config BR2_PACKAGE_DSTAT
+ bool "dstat"
+ select BR2_PACKAGE_PYTHON
+ help
+ Dstat, written in Python, is a versatile replacement for vmstat,
+ iostat, netstat and ifstat. Dstat overcomes some of their limitations
+ and adds some extra features, more counters and flexibility. Dstat is
+ handy for monitoring systems during performance tuning tests,
+ benchmarks or troubleshooting.
+ Dstat allows you to view all of your system resources in real-time,
+ you can e.g. compare disk utilization in combination with interrupts
+ from your IDE controller, or compare the network bandwidth numbers
+ directly with the disk throughput (in the same interval).
+
+ Note that to get proper output, your terminal size should be known by
+ the termios subsystem. This can be done by running the 'resize'
+ utility of busybox.
+
+ http://dag.wieers.com/home-made/dstat/
diff --git a/package/dstat/dstat.mk b/package/dstat/dstat.mk
new file mode 100644
--- /dev/null
+++ b/package/dstat/dstat.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# dstat
+#
+#############################################################
+
+DSTAT_VERSION = 0.7.2
+DSTAT_SOURCE = dstat-$(DSTAT_VERSION).tar.bz2
+DSTAT_SITE = http://dag.wieers.com/home-made/dstat
+
+define DSTAT_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) install
+endef
+
+$(eval $(call GENTARGETS,package,dstat))
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-02-07 22:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-07 20:51 [Buildroot] [PATCH] Add package dstat (python script for system stats/profiling) Thomas De Schampheleire
2012-02-07 22:31 ` Peter Korsgaard
-- strict thread matches above, loose matches on Subject: below --
2012-02-06 20:48 Thomas De Schampheleire
2012-02-07 19:20 ` Thomas Petazzoni
2011-10-19 7:35 Thomas De Schampheleire
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox