* [Buildroot] [pull request] Pull request for branch for-2012.02/ethercat
@ 2011-12-24 10:28 Thomas Petazzoni
2011-12-24 10:28 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Petazzoni @ 2011-12-24 10:28 UTC (permalink / raw)
To: buildroot
The following changes since commit ef3fe1bef6581c66af3858d540343e011cb9fdd6:
cdrkit: bump to version 1.1.11 and adjust style (2011-12-21 23:02:31 +0100)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2012.02/ethercat
Thomas Petazzoni (1):
igh-ethercat: new package
package/Config.in | 1 +
package/igh-ethercat/Config.in | 23 +++++++++++++++++++
package/igh-ethercat/igh-ethercat.mk | 41 ++++++++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 0 deletions(-)
create mode 100644 package/igh-ethercat/Config.in
create mode 100644 package/igh-ethercat/igh-ethercat.mk
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 9+ messages in thread* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-12-24 10:28 [Buildroot] [pull request] Pull request for branch for-2012.02/ethercat Thomas Petazzoni @ 2011-12-24 10:28 ` Thomas Petazzoni 2012-01-02 13:21 ` Thomas De Schampheleire 2012-01-02 19:15 ` Peter Korsgaard 0 siblings, 2 replies; 9+ messages in thread From: Thomas Petazzoni @ 2011-12-24 10:28 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- package/Config.in | 1 + package/igh-ethercat/Config.in | 23 +++++++++++++++++++ package/igh-ethercat/igh-ethercat.mk | 41 ++++++++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+), 0 deletions(-) create mode 100644 package/igh-ethercat/Config.in create mode 100644 package/igh-ethercat/igh-ethercat.mk diff --git a/package/Config.in b/package/Config.in index b6df18a..f7a5a13 100644 --- a/package/Config.in +++ b/package/Config.in @@ -431,6 +431,7 @@ source "package/hostapd/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/ifplugd/Config.in" endif +source "package/igh-ethercat/Config.in" source "package/iperf/Config.in" source "package/iproute2/Config.in" source "package/ipsec-tools/Config.in" diff --git a/package/igh-ethercat/Config.in b/package/igh-ethercat/Config.in new file mode 100644 index 0000000..764a021 --- /dev/null +++ b/package/igh-ethercat/Config.in @@ -0,0 +1,23 @@ +config BR2_PACKAGE_IGH_ETHERCAT + bool "igh-ethercat" + depends on BR2_LINUX_KERNEL + help + IgH EtherCAT Master for Linux. + + http://www.etherlab.org/en/ethercat/index.php + +if BR2_PACKAGE_IGH_ETHERCAT + +config BR2_PACKAGE_IGH_ETHERCAT_8139TOO + bool "8139too driver" + +config BR2_PACKAGE_IGH_ETHERCAT_E100 + bool "e100 driver" + +config BR2_PACKAGE_IGH_ETHERCAT_E1000 + bool "e1000 driver" + +config BR2_PACKAGE_IGH_ETHERCAT_R8169 + bool "r8169 driver" + +endif diff --git a/package/igh-ethercat/igh-ethercat.mk b/package/igh-ethercat/igh-ethercat.mk new file mode 100644 index 0000000..b6ac5b8 --- /dev/null +++ b/package/igh-ethercat/igh-ethercat.mk @@ -0,0 +1,41 @@ +IGH_ETHERCAT_VERSION = stable-1.5 +IGH_ETHERCAT_SITE = http://etherlabmaster.hg.sourceforge.net/hgweb/etherlabmaster/etherlabmaster/archive/ +IGH_ETHERCAT_SOURCE = $(IGH_ETHERCAT_VERSION).tar.bz2 + +IGH_ETHERCAT_AUTORECONF = YES +IGH_ETHERCAT_DEPENDENCIES = linux +IGH_ETHERCAT_INSTALL_STAGING = YES + +IGH_ETHERCAT_CONF_OPT = \ + --with-linux-dir=$(LINUX_DIR) + +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E100),--enable-e100,--disable-e100) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E1000),--enable-e1000,--disable-e1000) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_R8169),--enable-r8169,--disable-r8169) + +# Since we download ethercat from source control, we have to emulate +# the bootstrap script that creates the ChangeLog file before running +# autoreconf. We don't want to run that script directly, since we +# leave to the autotargets infrastructure the responsability of +# running 'autoreconf' so that the dependencies on host-automake, +# host-autoconf and al. are correct. +define IGH_ETHERCAT_CREATE_CHANGELOG + touch $(@D)/ChangeLog +endef + +IGH_ETHERCAT_POST_PATCH_HOOKS += IGH_ETHERCAT_CREATE_CHANGELOG + +define IGH_ETHERCAT_BUILD_MODULES + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules +endef + +IGH_ETHERCAT_POST_BUILD_HOOKS += IGH_ETHERCAT_BUILD_MODULES + +define IGH_ETHERCAT_INSTALL_MODULES + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install +endef + +IGH_ETHERCAT_POST_INSTALL_TARGET_HOOKS += IGH_ETHERCAT_INSTALL_MODULES + +$(eval $(call AUTOTARGETS)) -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-12-24 10:28 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni @ 2012-01-02 13:21 ` Thomas De Schampheleire 2012-01-02 19:15 ` Peter Korsgaard 1 sibling, 0 replies; 9+ messages in thread From: Thomas De Schampheleire @ 2012-01-02 13:21 UTC (permalink / raw) To: buildroot On Sat, Dec 24, 2011 at 11:28 AM, Thomas Petazzoni < thomas.petazzoni@free-electrons.com> wrote: > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> > Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> > --- > package/Config.in | 1 + > package/igh-ethercat/Config.in | 23 +++++++++++++++++++ > package/igh-ethercat/igh-ethercat.mk | 41 > ++++++++++++++++++++++++++++++++++ > 3 files changed, 65 insertions(+), 0 deletions(-) > create mode 100644 package/igh-ethercat/Config.in > create mode 100644 package/igh-ethercat/igh-ethercat.mk > > diff --git a/package/Config.in b/package/Config.in > index b6df18a..f7a5a13 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -431,6 +431,7 @@ source "package/hostapd/Config.in" > if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS > source "package/ifplugd/Config.in" > endif > +source "package/igh-ethercat/Config.in" > source "package/iperf/Config.in" > source "package/iproute2/Config.in" > source "package/ipsec-tools/Config.in" > diff --git a/package/igh-ethercat/Config.in > b/package/igh-ethercat/Config.in > new file mode 100644 > index 0000000..764a021 > --- /dev/null > +++ b/package/igh-ethercat/Config.in > @@ -0,0 +1,23 @@ > +config BR2_PACKAGE_IGH_ETHERCAT > + bool "igh-ethercat" > + depends on BR2_LINUX_KERNEL > + help > + IgH EtherCAT Master for Linux. > + > + http://www.etherlab.org/en/ethercat/index.php > + > +if BR2_PACKAGE_IGH_ETHERCAT > + > +config BR2_PACKAGE_IGH_ETHERCAT_8139TOO > + bool "8139too driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_E100 > + bool "e100 driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_E1000 > + bool "e1000 driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_R8169 > + bool "r8169 driver" > + > +endif > diff --git a/package/igh-ethercat/igh-ethercat.mk b/package/igh-ethercat/ > igh-ethercat.mk > new file mode 100644 > index 0000000..b6ac5b8 > --- /dev/null > +++ b/package/igh-ethercat/igh-ethercat.mk > @@ -0,0 +1,41 @@ > +IGH_ETHERCAT_VERSION = stable-1.5 > +IGH_ETHERCAT_SITE = > http://etherlabmaster.hg.sourceforge.net/hgweb/etherlabmaster/etherlabmaster/archive/ > +IGH_ETHERCAT_SOURCE = $(IGH_ETHERCAT_VERSION).tar.bz2 > + > +IGH_ETHERCAT_AUTORECONF = YES > +IGH_ETHERCAT_DEPENDENCIES = linux > +IGH_ETHERCAT_INSTALL_STAGING = YES > + > +IGH_ETHERCAT_CONF_OPT = \ > + --with-linux-dir=$(LINUX_DIR) > + > +IGH_ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_IGH_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) > +IGH_ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_IGH_ETHERCAT_E100),--enable-e100,--disable-e100) > +IGH_ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_IGH_ETHERCAT_E1000),--enable-e1000,--disable-e1000) > +IGH_ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_IGH_ETHERCAT_R8169),--enable-r8169,--disable-r8169) > + > +# Since we download ethercat from source control, we have to emulate > +# the bootstrap script that creates the ChangeLog file before running > +# autoreconf. We don't want to run that script directly, since we > +# leave to the autotargets infrastructure the responsability of > +# running 'autoreconf' so that the dependencies on host-automake, > +# host-autoconf and al. are correct. > +define IGH_ETHERCAT_CREATE_CHANGELOG > + touch $(@D)/ChangeLog > +endef > + > +IGH_ETHERCAT_POST_PATCH_HOOKS += IGH_ETHERCAT_CREATE_CHANGELOG > + > +define IGH_ETHERCAT_BUILD_MODULES > + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules > +endef > + > +IGH_ETHERCAT_POST_BUILD_HOOKS += IGH_ETHERCAT_BUILD_MODULES > + > +define IGH_ETHERCAT_INSTALL_MODULES > + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install > +endef > + > +IGH_ETHERCAT_POST_INSTALL_TARGET_HOOKS += IGH_ETHERCAT_INSTALL_MODULES > + > +$(eval $(call AUTOTARGETS)) > -- > 1.7.4.1 > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120102/7de569d9/attachment-0001.html> ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-12-24 10:28 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni 2012-01-02 13:21 ` Thomas De Schampheleire @ 2012-01-02 19:15 ` Peter Korsgaard 1 sibling, 0 replies; 9+ messages in thread From: Peter Korsgaard @ 2012-01-02 19:15 UTC (permalink / raw) To: buildroot >>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes: Thomas> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Committed, thanks. -- Bye, Peter Korsgaard ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [pull request] Pull request for branch ethercat
@ 2011-11-30 22:19 Thomas Petazzoni
2011-11-30 22:19 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni
0 siblings, 1 reply; 9+ messages in thread
From: Thomas Petazzoni @ 2011-11-30 22:19 UTC (permalink / raw)
To: buildroot
The following changes since commit 47c46ea1fc4a4c18be830f9092a8b9d8b3feda38:
linux: update stable kernel to 3.1.4 (2011-11-29 09:18:30 +0100)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git ethercat
Thomas Petazzoni (1):
igh-ethercat: new package
package/Config.in | 1 +
package/igh-ethercat/Config.in | 23 +++++++++++++++++++++++
package/igh-ethercat/igh-ethercat.mk | 34 ++++++++++++++++++++++++++++++++++
3 files changed, 58 insertions(+), 0 deletions(-)
create mode 100644 package/igh-ethercat/Config.in
create mode 100644 package/igh-ethercat/igh-ethercat.mk
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 9+ messages in thread* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-11-30 22:19 [Buildroot] [pull request] Pull request for branch ethercat Thomas Petazzoni @ 2011-11-30 22:19 ` Thomas Petazzoni 2011-12-01 8:33 ` Thomas De Schampheleire 2011-12-01 19:53 ` Jeff Krasky 0 siblings, 2 replies; 9+ messages in thread From: Thomas Petazzoni @ 2011-11-30 22:19 UTC (permalink / raw) To: buildroot Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> --- package/Config.in | 1 + package/igh-ethercat/Config.in | 23 +++++++++++++++++++++++ package/igh-ethercat/igh-ethercat.mk | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 58 insertions(+), 0 deletions(-) create mode 100644 package/igh-ethercat/Config.in create mode 100644 package/igh-ethercat/igh-ethercat.mk diff --git a/package/Config.in b/package/Config.in index 4b5e5d8..2ccdc1d 100644 --- a/package/Config.in +++ b/package/Config.in @@ -412,6 +412,7 @@ source "package/dhcpdump/Config.in" source "package/dnsmasq/Config.in" source "package/dropbear/Config.in" source "package/ebtables/Config.in" +source "package/igh-ethercat/Config.in" source "package/ethtool/Config.in" source "package/hostapd/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS diff --git a/package/igh-ethercat/Config.in b/package/igh-ethercat/Config.in new file mode 100644 index 0000000..764a021 --- /dev/null +++ b/package/igh-ethercat/Config.in @@ -0,0 +1,23 @@ +config BR2_PACKAGE_IGH_ETHERCAT + bool "igh-ethercat" + depends on BR2_LINUX_KERNEL + help + IgH EtherCAT Master for Linux. + + http://www.etherlab.org/en/ethercat/index.php + +if BR2_PACKAGE_IGH_ETHERCAT + +config BR2_PACKAGE_IGH_ETHERCAT_8139TOO + bool "8139too driver" + +config BR2_PACKAGE_IGH_ETHERCAT_E100 + bool "e100 driver" + +config BR2_PACKAGE_IGH_ETHERCAT_E1000 + bool "e1000 driver" + +config BR2_PACKAGE_IGH_ETHERCAT_R8169 + bool "r8169 driver" + +endif diff --git a/package/igh-ethercat/igh-ethercat.mk b/package/igh-ethercat/igh-ethercat.mk new file mode 100644 index 0000000..eb49591 --- /dev/null +++ b/package/igh-ethercat/igh-ethercat.mk @@ -0,0 +1,34 @@ +IGH_ETHERCAT_VERSION = stable-1.5 +IGH_ETHERCAT_SITE = http://etherlabmaster.hg.sourceforge.net/hgweb/etherlabmaster/etherlabmaster/archive/ +IGH_ETHERCAT_SOURCE = $(IGH_ETHERCAT_VERSION).tar.bz2 +IGH_ETHERCAT_AUTORECONF = YES +IGH_ETHERCAT_DEPENDENCIES = linux +IGH_ETHERCAT_INSTALL_STAGING = YES + +IGH_ETHERCAT_CONF_OPT = \ + --with-linux-dir=$(LINUX_DIR) + +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E100),--enable-e100,--disable-e100) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E1000),--enable-e1000,--disable-e1000) +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_R8169),--enable-r8169,--disable-r8169) + +define IGH_ETHERCAT_CREATE_CHANGELOG + touch $(@D)/ChangeLog +endef + +IGH_ETHERCAT_POST_PATCH_HOOKS += IGH_ETHERCAT_CREATE_CHANGELOG + +define IGH_ETHERCAT_BUILD_MODULES + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules +endef + +IGH_ETHERCAT_POST_BUILD_HOOKS += IGH_ETHERCAT_BUILD_MODULES + +define IGH_ETHERCAT_INSTALL_MODULES + $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install +endef + +IGH_ETHERCAT_POST_INSTALL_TARGET_HOOKS += IGH_ETHERCAT_INSTALL_MODULES + +$(eval $(call AUTOTARGETS)) \ No newline at end of file -- 1.7.4.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-11-30 22:19 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni @ 2011-12-01 8:33 ` Thomas De Schampheleire 2011-12-01 19:53 ` Jeff Krasky 1 sibling, 0 replies; 9+ messages in thread From: Thomas De Schampheleire @ 2011-12-01 8:33 UTC (permalink / raw) To: buildroot Hi Thomas, First of all: nice work. I was about to attempt creating a .mk file myself as well, but you beat me :-) On Wed, Nov 30, 2011 at 11:19 PM, Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote: > Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com> > --- > ?package/Config.in ? ? ? ? ? ? ? ? ? ?| ? ?1 + > ?package/igh-ethercat/Config.in ? ? ? | ? 23 +++++++++++++++++++++++ > ?package/igh-ethercat/igh-ethercat.mk | ? 34 ++++++++++++++++++++++++++++++++++ > ?3 files changed, 58 insertions(+), 0 deletions(-) > ?create mode 100644 package/igh-ethercat/Config.in > ?create mode 100644 package/igh-ethercat/igh-ethercat.mk > > diff --git a/package/Config.in b/package/Config.in > index 4b5e5d8..2ccdc1d 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -412,6 +412,7 @@ source "package/dhcpdump/Config.in" > ?source "package/dnsmasq/Config.in" > ?source "package/dropbear/Config.in" > ?source "package/ebtables/Config.in" > +source "package/igh-ethercat/Config.in" > ?source "package/ethtool/Config.in" > ?source "package/hostapd/Config.in" > ?if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS It seems you renamed the package later, as the alphabetical order is not correct anymore. > diff --git a/package/igh-ethercat/Config.in b/package/igh-ethercat/Config.in > new file mode 100644 > index 0000000..764a021 > --- /dev/null > +++ b/package/igh-ethercat/Config.in > @@ -0,0 +1,23 @@ > +config BR2_PACKAGE_IGH_ETHERCAT > + ? ? ? bool "igh-ethercat" > + ? ? ? depends on BR2_LINUX_KERNEL > + ? ? ? help > + ? ? ? ? IgH EtherCAT Master for Linux. > + > + ? ? ? ? http://www.etherlab.org/en/ethercat/index.php > + > +if BR2_PACKAGE_IGH_ETHERCAT > + > +config BR2_PACKAGE_IGH_ETHERCAT_8139TOO > + ? ? ? bool "8139too driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_E100 > + ? ? ? bool "e100 driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_E1000 > + ? ? ? bool "e1000 driver" > + > +config BR2_PACKAGE_IGH_ETHERCAT_R8169 > + ? ? ? bool "r8169 driver" > + > +endif > diff --git a/package/igh-ethercat/igh-ethercat.mk b/package/igh-ethercat/igh-ethercat.mk > new file mode 100644 > index 0000000..eb49591 > --- /dev/null > +++ b/package/igh-ethercat/igh-ethercat.mk > @@ -0,0 +1,34 @@ > +IGH_ETHERCAT_VERSION = stable-1.5 > +IGH_ETHERCAT_SITE ? ?= http://etherlabmaster.hg.sourceforge.net/hgweb/etherlabmaster/etherlabmaster/archive/ > +IGH_ETHERCAT_SOURCE ?= $(IGH_ETHERCAT_VERSION).tar.bz2 > +IGH_ETHERCAT_AUTORECONF = YES > +IGH_ETHERCAT_DEPENDENCIES = linux > +IGH_ETHERCAT_INSTALL_STAGING = YES > + > +IGH_ETHERCAT_CONF_OPT = \ > + ? ? ? --with-linux-dir=$(LINUX_DIR) > + > +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) > +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E100),--enable-e100,--disable-e100) > +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_E1000),--enable-e1000,--disable-e1000) > +IGH_ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_IGH_ETHERCAT_R8169),--enable-r8169,--disable-r8169) > + > +define IGH_ETHERCAT_CREATE_CHANGELOG > + ? ? ? touch $(@D)/ChangeLog > +endef > + > +IGH_ETHERCAT_POST_PATCH_HOOKS += IGH_ETHERCAT_CREATE_CHANGELOG Maybe it's a good idea to add a comment here, e.g. # Since we download ethercat from source control, we have to emulate the bootstrap script that creates ChangeLog. # We don't want to run that script directly, as it also runs 'autoreconf' which will be done by the autotargets infrastructure. > + > +define IGH_ETHERCAT_BUILD_MODULES > + ? ? ? $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules > +endef > + > +IGH_ETHERCAT_POST_BUILD_HOOKS += IGH_ETHERCAT_BUILD_MODULES > + > +define IGH_ETHERCAT_INSTALL_MODULES > + ? ? ? $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install > +endef > + > +IGH_ETHERCAT_POST_INSTALL_TARGET_HOOKS += IGH_ETHERCAT_INSTALL_MODULES > + > +$(eval $(call AUTOTARGETS)) > \ No newline at end of file Shouldn't there be a newline here? Best regards, Thomas ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-11-30 22:19 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni 2011-12-01 8:33 ` Thomas De Schampheleire @ 2011-12-01 19:53 ` Jeff Krasky 2011-12-01 20:36 ` Michael S. Zick 1 sibling, 1 reply; 9+ messages in thread From: Jeff Krasky @ 2011-12-01 19:53 UTC (permalink / raw) To: buildroot I tried taking the results of the patch and putting them in the .mk file that I was using with buildroot-2011.11 (I really don't want to have to find out why 2011.11 has that filesystem problem, so can someone please help with this makefile?). I do not see the application get built, nor do I see the kernel modules get built. I notice that the new .mk file that Thomas make doesn't have the $eval. Perhaps I need that back in? If so, can someone tell me the right one (gentargets versus autotargets). Please help. Here is the .mk file: ############################################################# # # EtherCAT # ############################################################# ETHERCAT_VERSION = 1.0 ETHERCAT_SOURCE = etherlabmaster-1.0.tar.bz2 ###ETHERCAT_SITE = file:///home/user1/Desktop/EtherCAT4Atmel/ ETHERCAT_SITE = http://127.0.0.1/home/user1/Desktop/EtherCAT4Atmel/ ETHERCAT_AUTORECONF = YES ETHERCAT_DEPENDENCIES = linux ETHERCAT_INSTALL_STAGING = YES #ETHERCAT_INSTALL_TARGET = YES #ETHERCAT_CONF_OPT = --enable-generic ETHERCAT_CONF_OPT = \ --with-linux-dir=$(LINUX_DIR) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_E100),--enable-e100,--disable-e100) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_E1000),--enable-e1000,--disable-e1000) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_R8169),--enable-r8169,--disable-r8169) define ETHERCAT_CREATE_CHANGELOG touch $(@D)/ChangeLog endef ETHERCAT_POST_PATCH_HOOKS += ETHERCAT_CREATE_CHANGELOG define ETHERCAT_BUILD_MODULES $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules endef ETHERCAT_POST_BUILD_HOOKS += ETHERCAT_BUILD_MODULES define ETHERCAT_INSTALL_MODULES $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install endef ETHERCAT_POST_INSTALL_TARGET_HOOKS += ETHERCAT_INSTALL_MODULES ###These next two lines were a part of building the kernel module. #ETHERCAT_DEPENDENCIES = linux #ETHERCAT_INSTALL_MOD_DIR = ethercat # From here to the GENTARGETS line is part of building the kernel module. #define ETHERCAT_BUILD_CMDS # $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) M=$(@D) modules #endef # #define ETHERCAT_INSTALL_TARGET_CMDS # $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) M=$(@D) \ # INSTALL_MOD_STRIP=1 \ # INSTALL_MOD_DIR=$(ETHERCAT_INSTALL_MOD_DIR) \ # modules_install #endef # #define ETHERCAT_UNINSTALL_TARGET_CMDS # rm -rf $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/$(ETHERCAT_INSTALL_MOD_D IR) #endef # $(eval $(call GENTARGETS,package,ethercat)) # This is the $eval that was used when making the application. It didn't appear to work when used # with the above $eval (the above one is for making the kernel module). # $(eval $(call AUTOTARGETS,package,ethercat)) ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-12-01 19:53 ` Jeff Krasky @ 2011-12-01 20:36 ` Michael S. Zick 2011-12-01 22:05 ` Jeff Krasky 0 siblings, 1 reply; 9+ messages in thread From: Michael S. Zick @ 2011-12-01 20:36 UTC (permalink / raw) To: buildroot On Thu December 1 2011, Jeff Krasky wrote: > I tried taking the results of the patch and putting them in the .mk file > that I was using with buildroot-2011.11 (I really don't want to have to find > out why 2011.11 has that filesystem problem, so can someone please help with > this makefile?). > > I do not see the application get built, nor do I see the kernel modules get > built. I notice that the new .mk file that Thomas make doesn't have the > $eval. Perhaps I need that back in? If so, can someone tell me the right > one (gentargets versus autotargets). > This is what his patch looked like: http://lists.busybox.net/pipermail/buildroot/2011-November/047920.html Note that there is an "eval" at the end of it. Note that it isn't in git (yet) but when it gets there (no pun intended): http://git.buildroot.net/buildroot/ You should be able to pull a plain text file from that web interface without e-mail mangling. Mike > Please help. > > Here is the .mk file: > > ############################################################# > # > # EtherCAT > # > ############################################################# > ETHERCAT_VERSION = 1.0 > ETHERCAT_SOURCE = etherlabmaster-1.0.tar.bz2 > ###ETHERCAT_SITE = file:///home/user1/Desktop/EtherCAT4Atmel/ > ETHERCAT_SITE = http://127.0.0.1/home/user1/Desktop/EtherCAT4Atmel/ > ETHERCAT_AUTORECONF = YES > ETHERCAT_DEPENDENCIES = linux > ETHERCAT_INSTALL_STAGING = YES > > #ETHERCAT_INSTALL_TARGET = YES > #ETHERCAT_CONF_OPT = --enable-generic > ETHERCAT_CONF_OPT = \ > --with-linux-dir=$(LINUX_DIR) > > ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) > ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_ETHERCAT_E100),--enable-e100,--disable-e100) > ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_ETHERCAT_E1000),--enable-e1000,--disable-e1000) > ETHERCAT_CONF_OPT += $(if > $(BR2_PACKAGE_ETHERCAT_R8169),--enable-r8169,--disable-r8169) > > define ETHERCAT_CREATE_CHANGELOG > touch $(@D)/ChangeLog > endef > > ETHERCAT_POST_PATCH_HOOKS += ETHERCAT_CREATE_CHANGELOG > > define ETHERCAT_BUILD_MODULES > $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules > endef > > ETHERCAT_POST_BUILD_HOOKS += ETHERCAT_BUILD_MODULES > > define ETHERCAT_INSTALL_MODULES > $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install > endef > > ETHERCAT_POST_INSTALL_TARGET_HOOKS += ETHERCAT_INSTALL_MODULES > > > ###These next two lines were a part of building the kernel module. > #ETHERCAT_DEPENDENCIES = linux > #ETHERCAT_INSTALL_MOD_DIR = ethercat > > # From here to the GENTARGETS line is part of building the kernel module. > #define ETHERCAT_BUILD_CMDS > # $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) M=$(@D) modules > #endef > # > #define ETHERCAT_INSTALL_TARGET_CMDS > # $(MAKE) $(LINUX26_MAKE_FLAGS) -C $(LINUX26_DIR) M=$(@D) \ > # INSTALL_MOD_STRIP=1 \ > # INSTALL_MOD_DIR=$(ETHERCAT_INSTALL_MOD_DIR) \ > # modules_install > #endef > # > #define ETHERCAT_UNINSTALL_TARGET_CMDS > # rm -rf > $(TARGET_DIR)/lib/modules/$(LINUX26_VERSION_PROBED)/$(ETHERCAT_INSTALL_MOD_D > IR) > #endef > > # $(eval $(call GENTARGETS,package,ethercat)) > > # This is the $eval that was used when making the application. It didn't > appear to work when used > # with the above $eval (the above one is for making the kernel module). > # $(eval $(call AUTOTARGETS,package,ethercat)) > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > > ^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/1] igh-ethercat: new package 2011-12-01 20:36 ` Michael S. Zick @ 2011-12-01 22:05 ` Jeff Krasky 0 siblings, 0 replies; 9+ messages in thread From: Jeff Krasky @ 2011-12-01 22:05 UTC (permalink / raw) To: buildroot > This is what his patch looked like: > http://lists.busybox.net/pipermail/buildroot/2011-November/047920.html > Note that there is an "eval" at the end of it. > > Note that it isn't in git (yet) but when it gets there (no pun intended): > http://git.buildroot.net/buildroot/ > You should be able to pull a plain text file from that web interface > without e-mail mangling. Ok, so far no build today has resulted in both EtherCAT application and EtherCAT kernel module. Actually, since I've started using the new patch, no EtherCAT stuff gets built into the image. Since I can't get the image to even boot when I use 2011.11, I revert back to what I was using yesterday, 2011.05. Can someone please step me through this. I have to be pretty close. I feel I am providing the relevant details. I just removed "IGH_" from the names and use the local copy of ethercat (see .mk file). Using the local copy should be ok because it worked yesterday in that it would result in either application or kernel module, just not both. So the issue should be with the following files. I feel I am attaching good details. Can someone please comment so I can get this thing running? 1) I applied the patch in 2011.11 just so that I could get the proper Config.in and .mk files. I got this message after applying the patch as copied from the website mentioned above using Firefox on Linux: user1 at dhcppc15:~/buildroot-2011.11> cat ethercat.patch | patch -p1 patching file package/Config.in patching file package/igh-ethercat/Config.in patching file package/igh-ethercat/igh-ethercat.mk patch unexpectedly ends in middle of line user1 at dhcppc15:~/buildroot-2011.11> Is that ok? It seemed to generate the files. 2) I already had package/Config.in with ethercat, but here is what it looks like. I am showing the lines surrounding the ethercat part - the whole thing is much larger: user1 at linux-0mmn:~/buildroot-2011.05> more package/Config.in menu "Package Selection for the target" source "package/busybox/Config.in" source "package/customize/Config.in" source "package/ethercat/Config.in" # Audio and video applications 3) Here is ethercat's Config.in: user1 at dhcppc15:~/buildroot-2011.05/package/ethercat> more Config.in config BR2_PACKAGE_ETHERCAT bool "ethercat" depends on BR2_LINUX_KERNEL help IgH EtherCAT Master for Linux. http://www.etherlab.org/en/ethercat/index.php if BR2_PACKAGE_ETHERCAT config BR2_PACKAGE_ETHERCAT_8139TOO bool "8139too driver" config BR2_PACKAGE_ETHERCAT_E100 bool "e100 driver" config BR2_PACKAGE_ETHERCAT_E1000 bool "e1000 driver" config BR2_PACKAGE_ETHERCAT_R8169 bool "r8169 driver" endif user1 at dhcppc15:~/buildroot-2011.05/package/ethercat> 4) Here is ethercat's .mk file: user1 at dhcppc15:~/buildroot-2011.05/package/ethercat> more ethercat.mk #IGH_ETHERCAT_VERSION = stable-1.5 #IGH_ETHERCAT_SITE = http://etherlabmaster.hg.sourceforge.net/hgweb/etherlabmaster/etherlabmaster /archive/ #IGH_ETHERCAT_SOURCE = $(IGH_ETHERCAT_VERSION).tar.bz2 ETHERCAT_VERSION = 1.0 ETHERCAT_SOURCE = etherlabmaster-1.0.tar.bz2 ETHERCAT_SITE = http://127.0.0.1/home/user1/Desktop/EtherCAT4Atmel/ ETHERCAT_AUTORECONF = YES ETHERCAT_DEPENDENCIES = linux ETHERCAT_INSTALL_STAGING = YES ETHERCAT_CONF_OPT = \ --with-linux-dir=$(LINUX_DIR) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_8139TOO),--enable-8139too,--disable-8139too) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_E100),--enable-e100,--disable-e100) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_E1000),--enable-e1000,--disable-e1000) ETHERCAT_CONF_OPT += $(if $(BR2_PACKAGE_ETHERCAT_R8169),--enable-r8169,--disable-r8169) define ETHERCAT_CREATE_CHANGELOG touch $(@D)/ChangeLog endef ETHERCAT_POST_PATCH_HOOKS += ETHERCAT_CREATE_CHANGELOG define ETHERCAT_BUILD_MODULES $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules endef ETHERCAT_POST_BUILD_HOOKS += ETHERCAT_BUILD_MODULES define ETHERCAT_INSTALL_MODULES $(MAKE) -C $(@D) $(LINUX_MAKE_FLAGS) modules_install endef ETHERCAT_POST_INSTALL_TARGET_HOOKS += ETHERCAT_INSTALL_MODULES $(eval $(call AUTOTARGETS)) user1 at dhcppc15:~/buildroot-2011.05/package/ethercat> ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-01-02 19:15 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-12-24 10:28 [Buildroot] [pull request] Pull request for branch for-2012.02/ethercat Thomas Petazzoni 2011-12-24 10:28 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni 2012-01-02 13:21 ` Thomas De Schampheleire 2012-01-02 19:15 ` Peter Korsgaard -- strict thread matches above, loose matches on Subject: below -- 2011-11-30 22:19 [Buildroot] [pull request] Pull request for branch ethercat Thomas Petazzoni 2011-11-30 22:19 ` [Buildroot] [PATCH 1/1] igh-ethercat: new package Thomas Petazzoni 2011-12-01 8:33 ` Thomas De Schampheleire 2011-12-01 19:53 ` Jeff Krasky 2011-12-01 20:36 ` Michael S. Zick 2011-12-01 22:05 ` Jeff Krasky
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox