[Buildroot] [PATCH 1/3] board/freescale/imx8mqevk: Fix typos in readme

[Buildroot] [PATCH 1/3] board/freescale/imx8mqevk: Fix typos in readme

[André Hentschel]

Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>
---
 board/freescale/imx8mqevk/readme.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt
index a32c122f91..e60eba4cb6 100644
--- a/board/freescale/imx8mqevk/readme.txt
+++ b/board/freescale/imx8mqevk/readme.txt
@@ -21,7 +21,7 @@ You will find in output/images/ the following files:
   - boot.vfat
   - fsl-imx8mq-evk.dtb
   - Image
-  - imx-boot-imx8mqevk-sd.bin
+  - imx8-boot-sd.bin
   - lpddr4_pmu_train_fw.bin
   - rootfs.ext2
   - rootfs.ext4
@@ -69,7 +69,7 @@ Enable HDMI output
 
 To enable HDMI output at boot you must provide the video kernel boot
 argument.  To set the video boot argument from U-Boot run after
-stoping in U-Boot prompt:
+stopping in U-Boot prompt:
 
 setenv mmcargs 'setenv bootargs console=${console} root=${mmcroot} video=HDMI-A-1:1920x1080-32 at 60'
 saveenv
-- 
2.17.1

[Buildroot] [PATCH 2/3] package/freescale-imx/firmware-imx: Fix typos

[André Hentschel]

Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>
---
 package/freescale-imx/firmware-imx/firmware-imx.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/package/freescale-imx/firmware-imx/firmware-imx.mk b/package/freescale-imx/firmware-imx/firmware-imx.mk
index 0a503d7a66..f9db09dae8 100644
--- a/package/freescale-imx/firmware-imx/firmware-imx.mk
+++ b/package/freescale-imx/firmware-imx/firmware-imx.mk
@@ -35,7 +35,7 @@ endef
 
 define FIRMWARE_IMX_INSTALL_IMAGES_CMDS
 	# Create padded versions of lpddr4_pmu_* and generate lpddr4_pmu_train_fw.bin.
-	# lpddr4_pmu_train_fw.bin isneeded when generating imx-boot-imx8mqevk-sd.bin
+	# lpddr4_pmu_train_fw.bin is needed when generating imx8-boot-sd.bin
 	# which is done in post-image script.
 	$(call FIRMWARE_IMX_PREPARE_LPDDR4_FW,1d)
 	$(call FIRMWARE_IMX_PREPARE_LPDDR4_FW,2d)
-- 
2.17.1

[Buildroot] [PATCH 3/3] board/freescale/common/imx: Fix typo

[André Hentschel]

Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>
---
 board/freescale/common/imx/genimage.cfg.template_imx8 | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/board/freescale/common/imx/genimage.cfg.template_imx8 b/board/freescale/common/imx/genimage.cfg.template_imx8
index fdb645014a..2f8842f8e0 100644
--- a/board/freescale/common/imx/genimage.cfg.template_imx8
+++ b/board/freescale/common/imx/genimage.cfg.template_imx8
@@ -3,7 +3,7 @@
 # We mimic the .sdcard Freescale's image format:
 # * the SD card must have 33 kB free space at the beginning,
 # * U-Boot is integrated into imx8-boot-sd.bin and is dumped as is,
-# * a FAT partition at offset 32MB is containing Image and DTB files
+# * a FAT partition at offset 8MB is containing Image and DTB files
 # * a single root filesystem partition is required (ext2, ext3 or ext4)
 #
 
-- 
2.17.1

[Buildroot] [PATCH 1/3] board/freescale/imx8mqevk: Fix typos in readme

[Thomas Petazzoni]

Hello,

On Thu, 27 Dec 2018 17:08:04 +0100, Andr? Hentschel wrote:
> Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>
> ---
>  board/freescale/imx8mqevk/readme.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

All three patches applied to master, thanks!

I've marked the previous series of 9 patches as "Changes Requested" in
patchwork. Could you remember to post an updated version of the
remaining 6 patches ?

Thanks!

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[Buildroot] [PATCH 1/3] board/freescale/imx8mqevk: Fix typos in readme

[Peter Korsgaard]

>>>>> "Andr?" == Andr? Hentschel <nerv@dawncrow.de> writes:

 > Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>

Committed to 2018.11.x, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3] package/freescale-imx/firmware-imx: Fix typos

[Peter Korsgaard]

>>>>> "Andr?" == Andr? Hentschel <nerv@dawncrow.de> writes:

 > Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>

Committed to 2018.11.x, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 3/3] board/freescale/common/imx: Fix typo

[Peter Korsgaard]

>>>>> "Andr?" == Andr? Hentschel <nerv@dawncrow.de> writes:

 > Signed-off-by: Andr? Hentschel <nerv@dawncrow.de>

Committed to 2018.11.x, thanks.

> ---
 >  board/freescale/common/imx/genimage.cfg.template_imx8 | 2 +-
 >  1 file changed, 1 insertion(+), 1 deletion(-)

 > diff --git a/board/freescale/common/imx/genimage.cfg.template_imx8
 > b/board/freescale/common/imx/genimage.cfg.template_imx8
 > index fdb645014a..2f8842f8e0 100644
 > --- a/board/freescale/common/imx/genimage.cfg.template_imx8
 > +++ b/board/freescale/common/imx/genimage.cfg.template_imx8
 > @@ -3,7 +3,7 @@
 >  # We mimic the .sdcard Freescale's image format:
 >  # * the SD card must have 33 kB free space at the beginning,
 >  # * U-Boot is integrated into imx8-boot-sd.bin and is dumped as is,
 > -# * a FAT partition at offset 32MB is containing Image and DTB files
 > +# * a FAT partition at offset 8MB is containing Image and DTB files
 >  # * a single root filesystem partition is required (ext2, ext3 or ext4)
 >  #
 
 > -- 
 > 2.17.1

 > _______________________________________________
 > buildroot mailing list
 > buildroot at busybox.net
 > http://lists.busybox.net/mailman/listinfo/buildroot

-- 
Bye, Peter Korsgaard