* [Buildroot] [PATCH 2 of 2 v2] Config.in files: add missing dependencies to toolchain option comments
2013-11-07 8:24 [Buildroot] [PATCH 0 of 2 v2] Config.in: comments should have correct dependencies Thomas De Schampheleire
2013-11-07 8:24 ` [Buildroot] [PATCH 1 of 2 v2] manual: clarify that Config.in " Thomas De Schampheleire
@ 2013-11-07 8:24 ` Thomas De Schampheleire
2013-11-10 23:01 ` [Buildroot] [PATCH 0 of 2 v2] Config.in: comments should have correct dependencies Peter Korsgaard
2 siblings, 0 replies; 5+ messages in thread
From: Thomas De Schampheleire @ 2013-11-07 8:24 UTC (permalink / raw)
To: buildroot
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
---
v2:
- rebase
- use if...endif where possible (comment Arnout)
While browsing through the Config.in files, I noticed following problems
that I am planning to fix in later patches:
- missing comments for some dependencies on toolchain options
- unification of dependency on Linux kernel
- unification of dependency on udev /dev management
- unification of dependency on python, libgtk2, xorg7 (with comment or not)
- unification of dependency on locale support (and update manual)
- spaces instead of tabs on some lines, and trailing whitespace
- move comments close to the corresponding config option (instead of at the
end of the file)
fs/iso9660/Config.in | 3 ++-
linux/Config.ext.in | 2 ++
package/a10disp/Config.in | 3 ++-
package/aiccu/Config.in | 1 +
package/aircrack-ng/Config.in | 1 +
package/alsamixergui/Config.in | 3 ++-
package/avahi/Config.in | 1 +
package/bcusdk/Config.in | 1 +
package/bind/Config.in | 1 +
package/blackbox/Config.in | 3 ++-
package/bluez_utils/Config.in | 1 +
package/bmon/Config.in | 1 +
package/bonnie/Config.in | 1 +
package/bustle/Config.in | 1 +
package/ccid/Config.in | 1 +
package/cdrkit/Config.in | 1 +
package/civetweb/Config.in | 1 +
package/classpath/Config.in | 1 +
package/connman/Config.in | 2 +-
package/conntrack-tools/Config.in | 1 +
package/coreutils/Config.in | 1 +
package/cryptsetup/Config.in | 1 +
package/curlftpfs/Config.in | 1 +
package/cvs/Config.in | 1 +
package/czmq/Config.in | 2 ++
package/dbus-glib/Config.in | 4 ++--
package/dbus-python/Config.in | 4 ++--
package/dbus/Config.in | 1 +
package/dmraid/Config.in | 1 +
package/docker/Config.in | 4 ++--
package/dropwatch/Config.in | 1 +
package/dstat/Config.in | 1 +
package/ebtables/Config.in | 1 +
package/efl/libedbus/Config.in | 2 ++
package/enlightenment/Config.in | 2 +-
package/exfat/Config.in | 1 +
package/fdk-aac/Config.in | 3 +++
package/filemq/Config.in | 2 ++
package/findutils/Config.in | 1 +
package/flex/Config.in | 6 +++++-
package/fltk/Config.in | 3 ++-
package/foomatic-filters/Config.in | 1 +
package/freescale-imx/gpu-viv-bin-mx6q/Config.in | 1 +
package/gawk/Config.in | 1 +
package/gdb/Config.in | 2 ++
package/gesftpserver/Config.in | 1 +
package/gettext/Config.in | 3 ++-
package/git/Config.in | 1 +
package/gmpc/Config.in | 4 ++--
package/gob2/Config.in | 1 +
package/gpsd/Config.in | 1 +
package/gstreamer/gst-ffmpeg/Config.in | 1 +
package/gtest/Config.in | 1 +
package/gutenprint/Config.in | 1 +
package/gvfs/Config.in | 1 +
package/hiawatha/Config.in | 1 +
package/hplip/Config.in | 1 +
package/inotify-tools/Config.in | 1 +
package/iperf/Config.in | 1 +
package/jamvm/Config.in | 2 ++
package/kismet/Config.in | 1 +
package/libdrm/Config.in | 3 ++-
package/libedit/Config.in | 1 +
package/libfslvpuwrap/Config.in | 3 ++-
package/libfuse/Config.in | 3 ++-
package/libgail/Config.in | 4 ++--
package/libglade/Config.in | 4 ++--
package/libgtk2/Config.in | 1 +
package/libnspr/Config.in | 1 +
package/libnss/Config.in | 1 +
package/libtirpc/Config.in | 2 ++
package/libunwind/Config.in | 2 ++
package/liburcu/Config.in | 1 +
package/linknx/Config.in | 1 +
package/linphone/Config.in | 1 +
package/lmbench/Config.in | 1 +
package/logrotate/Config.in | 1 +
package/ltp-testsuite/Config.in | 5 +++--
package/lttng-babeltrace/Config.in | 4 ++--
package/lttng-libust/Config.in | 4 ++--
package/lttng-tools/Config.in | 1 +
package/lvm2/Config.in | 3 ++-
package/lxc/Config.in | 1 +
package/lzma/Config.in | 3 ++-
package/m4/Config.in | 1 +
package/midori/Config.in | 4 +++-
package/minicom/Config.in | 1 +
package/minidlna/Config.in | 1 +
package/mongoose/Config.in | 1 +
package/mplayer/Config.in | 2 ++
package/mutt/Config.in | 1 +
package/mysql_client/Config.in | 1 +
package/ndisc6/Config.in | 1 +
package/neard/Config.in | 1 +
package/neardal/Config.in | 1 +
package/netatalk/Config.in | 1 +
package/netkitbase/Config.in | 3 ++-
package/netkittelnet/Config.in | 1 +
package/network-manager/Config.in | 1 +
package/nfs-utils/Config.in | 1 +
package/nmap/Config.in | 1 +
package/nodejs/Config.in | 3 +++
package/ntfs-3g/Config.in | 1 +
package/numactl/Config.in | 2 ++
package/ofono/Config.in | 1 +
package/olsr/Config.in | 1 +
package/on2-8170-modules/Config.in | 1 +
package/openobex/Config.in | 1 +
package/openpowerlink/Config.in | 1 +
package/openvpn/Config.in | 1 +
package/oprofile/Config.in | 1 +
package/p11-kit/Config.in | 1 +
package/parted/Config.in | 3 ++-
package/pcmanfm/Config.in | 4 ++--
package/pcsc-lite/Config.in | 1 +
package/php/Config.ext | 1 +
package/pkg-config/Config.in | 3 ++-
package/python-nfc/Config.in | 1 +
package/python-pyzmq/Config.in | 1 +
package/python/Config.in | 1 +
package/python3/Config.in | 1 +
package/qt/Config.in | 2 ++
package/qt5/Config.in | 1 +
package/quagga/Config.in | 2 +-
package/quota/Config.in | 1 +
package/radvd/Config.in | 1 +
package/redis/Config.in | 1 +
package/rpcbind/Config.in | 2 ++
package/rpi-userland/Config.in | 1 +
package/rt-tests/Config.in | 1 +
package/rtorrent/Config.in | 1 +
package/samba/Config.in | 2 ++
package/ser2net/Config.in | 1 +
package/smartmontools/Config.in | 1 +
package/snowball-init/Config.in | 4 ++--
package/socat/Config.in | 1 +
package/socketcand/Config.in | 1 +
package/sqlcipher/Config.in | 7 +++++--
package/squashfs3/Config.in | 3 ++-
package/squid/Config.in | 1 +
package/sshfs/Config.in | 1 +
package/synergy/Config.in | 3 ++-
package/sysprof/Config.in | 3 ++-
package/systemd/Config.in | 1 +
package/transmission/Config.in | 1 +
package/tvheadend/Config.in | 3 ++-
package/udisks/Config.in | 1 +
package/udpcast/Config.in | 1 +
package/unionfs/Config.in | 1 +
package/ussp-push/Config.in | 1 +
package/vala/Config.in | 3 ++-
package/webkit/Config.in | 2 ++
package/webrtc-audio-processing/Config.in | 1 +
package/wget/Config.in | 1 +
package/wireshark/Config.in | 1 +
package/wvdial/Config.in | 1 +
package/wvstreams/Config.in | 1 +
package/xenomai/Config.in | 2 ++
package/xscreensaver/Config.in | 1 +
package/zmqpp/Config.in | 8 ++++++--
package/zyre/Config.in | 2 ++
system/Config.in | 1 +
162 files changed, 228 insertions(+), 50 deletions(-)
diff --git a/fs/iso9660/Config.in b/fs/iso9660/Config.in
--- a/fs/iso9660/Config.in
+++ b/fs/iso9660/Config.in
@@ -13,4 +13,5 @@ config BR2_TARGET_ROOTFS_ISO9660_BOOT_ME
default "fs/iso9660/menu.lst"
comment "iso image requires a Linux kernel to be built"
- depends on (BR2_i386 || BR2_x86_64) && !BR2_LINUX_KERNEL
+ depends on BR2_i386 || BR2_x86_64
+ depends on !BR2_LINUX_KERNEL
diff --git a/linux/Config.ext.in b/linux/Config.ext.in
--- a/linux/Config.ext.in
+++ b/linux/Config.ext.in
@@ -17,6 +17,8 @@ config BR2_LINUX_KERNEL_EXT_XENOMAI
PowerPC, 2.6.35.7, 2.6.36.4, 3.0.8.
comment "xenomai needs a toolchain w/ threads"
+ depends on BR2_i386 || BR2_x86_64 || BR2_arm || \
+ BR2_bfin || BR2_powerpc || BR2_sh4
depends on !BR2_TOOLCHAIN_HAS_THREADS
config BR2_LINUX_KERNEL_EXT_XENOMAI_ADEOS_PATCH
diff --git a/package/a10disp/Config.in b/package/a10disp/Config.in
--- a/package/a10disp/Config.in
+++ b/package/a10disp/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_A10DISP
http://github.com/hglm/a10disp
comment "a10disp requires the linux kernel"
- depends on BR2_arm && !BR2_LINUX_KERNEL
+ depends on BR2_arm
+ depends on !BR2_LINUX_KERNEL
diff --git a/package/aiccu/Config.in b/package/aiccu/Config.in
--- a/package/aiccu/Config.in
+++ b/package/aiccu/Config.in
@@ -20,4 +20,5 @@ config BR2_PACKAGE_AICCU
http://www.sixxs.net/tools/aiccu/
comment "aiccu needs a toolchain w/ IPv6, wchar, threads"
+ depends on BR2_USE_MMU
depends on !(BR2_INET_IPV6 && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/aircrack-ng/Config.in b/package/aircrack-ng/Config.in
--- a/package/aircrack-ng/Config.in
+++ b/package/aircrack-ng/Config.in
@@ -11,5 +11,6 @@ config BR2_PACKAGE_AIRCRACK_NG
http://www.aircrack-ng.org/
comment "aircrack-ng needs a toolchain w/ largefile, threads"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/alsamixergui/Config.in b/package/alsamixergui/Config.in
--- a/package/alsamixergui/Config.in
+++ b/package/alsamixergui/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_ALSAMIXERGUI
http://www.iua.upf.es/~mdeboer/projects/alsamixergui/
comment "alsamixergui needs a toolchain w/ C++, threads"
- depends on (!BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS) && BR2_PACKAGE_XORG7
+ depends on BR2_PACKAGE_XORG7 && BR2_USE_MMU
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/avahi/Config.in b/package/avahi/Config.in
--- a/package/avahi/Config.in
+++ b/package/avahi/Config.in
@@ -37,4 +37,5 @@ config BR2_PACKAGE_AVAHI_DAEMON
endif
comment "avahi needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/bcusdk/Config.in b/package/bcusdk/Config.in
--- a/package/bcusdk/Config.in
+++ b/package/bcusdk/Config.in
@@ -20,4 +20,5 @@ config BR2_PACKAGE_BCUSDK
http://www.auto.tuwien.ac.at/~mkoegler/eib/
comment "bcusdk needs a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/bind/Config.in b/package/bind/Config.in
--- a/package/bind/Config.in
+++ b/package/bind/Config.in
@@ -40,4 +40,5 @@ config BR2_PACKAGE_BIND_TOOLS
endif
comment "bind needs a toolchain w/ largefile, IPv6"
+ depends on BR2_USE_MMU
depends on !(BR2_LARGEFILE || BR2_INET_IPV6)
diff --git a/package/blackbox/Config.in b/package/blackbox/Config.in
--- a/package/blackbox/Config.in
+++ b/package/blackbox/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_BLACKBOX
http://blackboxwm.sourceforge.net/
comment "blackbox needs a toolchain w/ C++"
- depends on BR2_PACKAGE_XORG7 && !BR2_INSTALL_LIBSTDCPP
+ depends on BR2_PACKAGE_XORG7 && BR2_USE_MMU
+ depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/bluez_utils/Config.in b/package/bluez_utils/Config.in
--- a/package/bluez_utils/Config.in
+++ b/package/bluez_utils/Config.in
@@ -39,4 +39,5 @@ config BR2_PACKAGE_BLUEZ_UTILS_USB
endif
comment "bluez-utils needs a toolchain w/ wchar, threads"
+ depends on !BR2_avr32 && BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/bmon/Config.in b/package/bmon/Config.in
--- a/package/bmon/Config.in
+++ b/package/bmon/Config.in
@@ -6,4 +6,5 @@ config BR2_PACKAGE_BMON
Linux bandwidth monitor
comment "bmon needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
diff --git a/package/bonnie/Config.in b/package/bonnie/Config.in
--- a/package/bonnie/Config.in
+++ b/package/bonnie/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_BONNIE
http://www.coker.com.au/bonnie++/
comment "bonnie++ needs a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/bustle/Config.in b/package/bustle/Config.in
--- a/package/bustle/Config.in
+++ b/package/bustle/Config.in
@@ -20,4 +20,5 @@ config BR2_PACKAGE_BUSTLE
http://www.willthompson.co.uk/bustle/
comment "bustle needs a toolchain w/ wchar, threads"
+ depends on BR2_PACKAGE_DBUS
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/ccid/Config.in b/package/ccid/Config.in
--- a/package/ccid/Config.in
+++ b/package/ccid/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_CCID
http://pcsclite.alioth.debian.org/ccid.html
comment "ccid needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/cdrkit/Config.in b/package/cdrkit/Config.in
--- a/package/cdrkit/Config.in
+++ b/package/cdrkit/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_CDRKIT
http://www.cdrkit.org/
comment "cdrkit needs a toolchain w/ largefile"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE
diff --git a/package/civetweb/Config.in b/package/civetweb/Config.in
--- a/package/civetweb/Config.in
+++ b/package/civetweb/Config.in
@@ -24,4 +24,5 @@ comment "Lua support needs a toolchain w
endif
comment "civetweb needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/classpath/Config.in b/package/classpath/Config.in
--- a/package/classpath/Config.in
+++ b/package/classpath/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_CLASSPATH
http://classpath.org
comment "classpath needs a toolchain w/ IPv6"
+ depends on BR2_PACKAGE_JAMVM
depends on !BR2_INET_IPV6
diff --git a/package/connman/Config.in b/package/connman/Config.in
--- a/package/connman/Config.in
+++ b/package/connman/Config.in
@@ -51,6 +51,6 @@ config BR2_PACKAGE_CONNMAN_CLIENT
endif # BR2_PACKAGE_CONNMAN
comment "connman needs a toolchain w/ IPv6, wchar, threads, resolver"
- depends on !BR2_avr32
+ depends on BR2_USE_MMU && !BR2_avr32
depends on BR2_UCLIBC_VERSION_0_9_32 || \
!BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/conntrack-tools/Config.in b/package/conntrack-tools/Config.in
--- a/package/conntrack-tools/Config.in
+++ b/package/conntrack-tools/Config.in
@@ -18,6 +18,7 @@ config BR2_PACKAGE_CONNTRACK_TOOLS
http://www.netfilter.org/projects/conntrack-tools/
comment "conntrack-tools needs a toolchain w/ IPv6, largefile, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6 || \
!BR2_LARGEFILE || \
!(BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_HAS_NATIVE_RPC)
diff --git a/package/coreutils/Config.in b/package/coreutils/Config.in
--- a/package/coreutils/Config.in
+++ b/package/coreutils/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_COREUTILS
http://www.gnu.org/software/coreutils/
comment "coreutils needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/cryptsetup/Config.in b/package/cryptsetup/Config.in
--- a/package/cryptsetup/Config.in
+++ b/package/cryptsetup/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_CRYPTSETUP
https://code.google.com/p/cryptsetup/
comment "cryptsetup needs a toolchain w/ largefile, wchar"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR
diff --git a/package/curlftpfs/Config.in b/package/curlftpfs/Config.in
--- a/package/curlftpfs/Config.in
+++ b/package/curlftpfs/Config.in
@@ -18,4 +18,5 @@ config BR2_PACKAGE_CURLFTPFS
http://curlftpfs.sourceforge.net/
comment "curlftpfs needs a toolchain w/ largefile, wchar, threads, dynamic library"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
diff --git a/package/cvs/Config.in b/package/cvs/Config.in
--- a/package/cvs/Config.in
+++ b/package/cvs/Config.in
@@ -16,4 +16,5 @@ config BR2_PACKAGE_CVS_SERVER
Enable cvs server code
comment "cvs needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/czmq/Config.in b/package/czmq/Config.in
--- a/package/czmq/Config.in
+++ b/package/czmq/Config.in
@@ -16,5 +16,7 @@ config BR2_PACKAGE_CZMQ
http://czmq.zeromq.org/
comment "czmq needs a toolchain w/ C++, IPv6, largefile, wchar, threads"
+ depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && \
+ !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_LARGEFILE \
&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/dbus-glib/Config.in b/package/dbus-glib/Config.in
--- a/package/dbus-glib/Config.in
+++ b/package/dbus-glib/Config.in
@@ -10,5 +10,5 @@ config BR2_PACKAGE_DBUS_GLIB
http://www.freedesktop.org/software/dbus
comment "dbus-glib needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_DBUS && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_DBUS
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/dbus-python/Config.in b/package/dbus-python/Config.in
--- a/package/dbus-python/Config.in
+++ b/package/dbus-python/Config.in
@@ -11,5 +11,5 @@ config BR2_PACKAGE_DBUS_PYTHON
http://dbus.freedesktop.org/doc/dbus-python/
comment "dbus-python needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_DBUS && BR2_PACKAGE_PYTHON
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/dbus/Config.in b/package/dbus/Config.in
--- a/package/dbus/Config.in
+++ b/package/dbus/Config.in
@@ -28,4 +28,5 @@ choice
endchoice
comment "dbus needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/dmraid/Config.in b/package/dmraid/Config.in
--- a/package/dmraid/Config.in
+++ b/package/dmraid/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_DMRAID
respective mappings for the ATARAID sets discovered.
comment "dmraid needs a toolchain w/ largefile"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE
diff --git a/package/docker/Config.in b/package/docker/Config.in
--- a/package/docker/Config.in
+++ b/package/docker/Config.in
@@ -11,5 +11,5 @@ config BR2_PACKAGE_DOCKER
http://icculus.org/openbox/2/docker
comment "docker needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_XORG7 && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_XORG7
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/dropwatch/Config.in b/package/dropwatch/Config.in
--- a/package/dropwatch/Config.in
+++ b/package/dropwatch/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_DROPWATCH
https://fedorahosted.org/dropwatch/
comment "dropwatch needs a toolchain w/ threads"
+ depends on !BR2_aarch64
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/dstat/Config.in b/package/dstat/Config.in
--- a/package/dstat/Config.in
+++ b/package/dstat/Config.in
@@ -21,4 +21,5 @@ config BR2_PACKAGE_DSTAT
http://dag.wieers.com/home-made/dstat/
comment "dstat needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/ebtables/Config.in b/package/ebtables/Config.in
--- a/package/ebtables/Config.in
+++ b/package/ebtables/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_EBTABLES
http://ebtables.sourceforge.net
comment "ebtables needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
diff --git a/package/efl/libedbus/Config.in b/package/efl/libedbus/Config.in
--- a/package/efl/libedbus/Config.in
+++ b/package/efl/libedbus/Config.in
@@ -24,6 +24,7 @@ config BR2_PACKAGE_LIBEDBUS_BLUEZ
Bluetooth support.
comment "bluez support needs a toolchain w/ wchar, threads"
+ depends on !BR2_avr32
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_LIBEDBUS_CONNMAN
@@ -40,4 +41,5 @@ config BR2_PACKAGE_LIBEDBUS_NOTIFY
endif
comment "libedbus needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/enlightenment/Config.in b/package/enlightenment/Config.in
--- a/package/enlightenment/Config.in
+++ b/package/enlightenment/Config.in
@@ -37,6 +37,6 @@ config BR2_PACKAGE_ENLIGHTENMENT
http://www.enlightenment.org/
comment "enlightenment needs a toolchain w/ wchar, C++, threads"
- depends on BR2_PACKAGE_XORG7
+ depends on BR2_PACKAGE_XORG7 && BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
depends on !BR2_avr32
diff --git a/package/exfat/Config.in b/package/exfat/Config.in
--- a/package/exfat/Config.in
+++ b/package/exfat/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_EXFAT
http://code.google.com/p/exfat/
comment "exfat needs a toolchain w/ largefile, wchar, threads, dynamic library"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || BR2_PREFER_STATIC_LIB
diff --git a/package/fdk-aac/Config.in b/package/fdk-aac/Config.in
--- a/package/fdk-aac/Config.in
+++ b/package/fdk-aac/Config.in
@@ -15,3 +15,6 @@ config BR2_PACKAGE_FDK_AAC
comment "fdk-aac needs a toolchain w/ C++"
depends on !BR2_INSTALL_LIBSTDCPP
+ depends on BR2_i386 || BR2_x86_64 || BR2_arm || BR2_armeb || \
+ BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el || \
+ BR2_powerpc || BR2_sh || BR2_sh64
diff --git a/package/filemq/Config.in b/package/filemq/Config.in
--- a/package/filemq/Config.in
+++ b/package/filemq/Config.in
@@ -18,5 +18,7 @@ config BR2_PACKAGE_FILEMQ
http://github.com/zeromq/filemq
comment "filemq needs a toolchain w/ C++, IPv6, largefile, wchar, threads"
+ depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && \
+ !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_LARGEFILE \
&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/findutils/Config.in b/package/findutils/Config.in
--- a/package/findutils/Config.in
+++ b/package/findutils/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_FINDUTILS
http://www.gnu.org/software/findutils/findutils.html
comment "findutils needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/flex/Config.in b/package/flex/Config.in
--- a/package/flex/Config.in
+++ b/package/flex/Config.in
@@ -7,11 +7,12 @@ config BR2_PACKAGE_FLEX
http://flex.sourceforge.net/
+if BR2_PACKAGE_FLEX
+
config BR2_PACKAGE_FLEX_BINARY
bool "Install tool in the target"
# needs fork()
depends on BR2_USE_MMU
- depends on BR2_PACKAGE_FLEX
# runtime dependency
select BR2_PACKAGE_M4
depends on BR2_USE_WCHAR # m4
@@ -19,4 +20,7 @@ config BR2_PACKAGE_FLEX_BINARY
Install the flex binary tool in the target filesystem.
comment "flex binary needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
+
+endif
diff --git a/package/fltk/Config.in b/package/fltk/Config.in
--- a/package/fltk/Config.in
+++ b/package/fltk/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_FLTK
http://www.fltk.org/
comment "fltk needs a toolchain w/ C++"
- depends on !BR2_INSTALL_LIBSTDCPP && BR2_PACKAGE_XORG7
+ depends on BR2_USE_MMU && BR2_PACKAGE_XORG7
+ depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/foomatic-filters/Config.in b/package/foomatic-filters/Config.in
--- a/package/foomatic-filters/Config.in
+++ b/package/foomatic-filters/Config.in
@@ -1,4 +1,5 @@
comment "foomatic-filters needs a toolchain w/ threads"
+ depends on BR2_PACKAGE_CUPS
depends on !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_FOOMATIC_FILTERS
diff --git a/package/freescale-imx/gpu-viv-bin-mx6q/Config.in b/package/freescale-imx/gpu-viv-bin-mx6q/Config.in
--- a/package/freescale-imx/gpu-viv-bin-mx6q/Config.in
+++ b/package/freescale-imx/gpu-viv-bin-mx6q/Config.in
@@ -1,4 +1,5 @@
comment "gpu-viv-bin-mx6q needs an (e)glibc toolchain"
+ depends on BR2_arm
depends on !BR2_TOOLCHAIN_USES_GLIBC
config BR2_PACKAGE_GPU_VIV_BIN_MX6Q
diff --git a/package/gawk/Config.in b/package/gawk/Config.in
--- a/package/gawk/Config.in
+++ b/package/gawk/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_GAWK
http://www.gnu.org/software/gawk/
comment "gawk needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/gdb/Config.in b/package/gdb/Config.in
--- a/package/gdb/Config.in
+++ b/package/gdb/Config.in
@@ -1,4 +1,5 @@
comment "gdb/gdbserver needs a toolchain w/ threads, threads debug"
+ depends on !BR2_aarch64
depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_TOOLCHAIN_HAS_THREADS_DEBUG
config BR2_PACKAGE_GDB
@@ -42,6 +43,7 @@ config BR2_PACKAGE_GDB_DEBUGGER
depends on !BR2_sh && !BR2_sh64 && !BR2_avr32 && !BR2_microblaze && !BR2_bfin
comment "full gdb on target needs a toolchain w/ wchar"
+ depends on !BR2_sh && !BR2_sh64 && !BR2_avr32 && !BR2_microblaze && !BR2_bfin
depends on !BR2_USE_WCHAR
endif
diff --git a/package/gesftpserver/Config.in b/package/gesftpserver/Config.in
--- a/package/gesftpserver/Config.in
+++ b/package/gesftpserver/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_GESFTPSERVER
http://www.greenend.org.uk/rjk/sftpserver/
comment "gesftpserver needs a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/gettext/Config.in b/package/gettext/Config.in
--- a/package/gettext/Config.in
+++ b/package/gettext/Config.in
@@ -25,4 +25,5 @@ config BR2_PACKAGE_GETTEXT_TOOLS
correct operation of programs.
comment "gettext needs a toolchain w/ wchar"
- depends on BR2_NEEDS_GETTEXT && !BR2_USE_WCHAR
+ depends on BR2_NEEDS_GETTEXT
+ depends on !BR2_USE_WCHAR
diff --git a/package/git/Config.in b/package/git/Config.in
--- a/package/git/Config.in
+++ b/package/git/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_GIT
http://git-scm.com
comment "git needs a toolchain w/ largefile"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE
diff --git a/package/gmpc/Config.in b/package/gmpc/Config.in
--- a/package/gmpc/Config.in
+++ b/package/gmpc/Config.in
@@ -21,5 +21,5 @@ config BR2_PACKAGE_GMPC
http://gmpcwiki.sarine.nl/index.php?title=GMPC
comment "gmpc needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_LIBGTK2 && !BR2_USE_WCHAR || \
- !BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_PACKAGE_XORG7 && BR2_PACKAGE_LIBGTK2
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/gob2/Config.in b/package/gob2/Config.in
--- a/package/gob2/Config.in
+++ b/package/gob2/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_GOB2
http://www.jirka.org/gob.html
comment "gob2 needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/gpsd/Config.in b/package/gpsd/Config.in
--- a/package/gpsd/Config.in
+++ b/package/gpsd/Config.in
@@ -1,4 +1,5 @@
comment "gpsd needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_GPSD
diff --git a/package/gstreamer/gst-ffmpeg/Config.in b/package/gstreamer/gst-ffmpeg/Config.in
--- a/package/gstreamer/gst-ffmpeg/Config.in
+++ b/package/gstreamer/gst-ffmpeg/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_GST_FFMPEG
http://gstreamer.freedesktop.org/
comment "gst-ffmpeg needs a toolchain w/ largefile, IPv6"
+ depends on BR2_PACKAGE_GSTREAMER
depends on !(BR2_LARGEFILE && BR2_INET_IPV6)
diff --git a/package/gtest/Config.in b/package/gtest/Config.in
--- a/package/gtest/Config.in
+++ b/package/gtest/Config.in
@@ -22,4 +22,5 @@ config BR2_PACKAGE_GTEST
http://code.google.com/p/googletest/
comment "gtest needs a toolchain w/ C++, wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INSTALL_LIBSTDCPP
diff --git a/package/gutenprint/Config.in b/package/gutenprint/Config.in
--- a/package/gutenprint/Config.in
+++ b/package/gutenprint/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_GUTENPRINT
http://gimp-print.sourceforge.net/
comment "gutenprint needs a toolchain w/ C++"
+ depends on BR2_PACKAGE_CUPS
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/gvfs/Config.in b/package/gvfs/Config.in
--- a/package/gvfs/Config.in
+++ b/package/gvfs/Config.in
@@ -17,4 +17,5 @@ config BR2_PACKAGE_GVFS
http://en.wikipedia.org/wiki/GVFS
comment "gvfs needs a toolchain w/ largefile, wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/hiawatha/Config.in b/package/hiawatha/Config.in
--- a/package/hiawatha/Config.in
+++ b/package/hiawatha/Config.in
@@ -1,4 +1,5 @@
comment "hiawatha needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_HIAWATHA
diff --git a/package/hplip/Config.in b/package/hplip/Config.in
--- a/package/hplip/Config.in
+++ b/package/hplip/Config.in
@@ -16,4 +16,5 @@ config BR2_PACKAGE_HPLIP
http://hplipopensource.com/
comment "hplip needs a toolchain w/ C++, threads"
+ depends on BR2_PACKAGE_CUPS
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/inotify-tools/Config.in b/package/inotify-tools/Config.in
--- a/package/inotify-tools/Config.in
+++ b/package/inotify-tools/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_INOTIFY_TOOLS
https://github.com/rvoicilas/inotify-tools
comment "inotify-tools needs a toolchain w/ largefile"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE
diff --git a/package/iperf/Config.in b/package/iperf/Config.in
--- a/package/iperf/Config.in
+++ b/package/iperf/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_IPERF
http://dast.nlanr.net/projects/iperf/
comment "iperf needs a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/jamvm/Config.in b/package/jamvm/Config.in
--- a/package/jamvm/Config.in
+++ b/package/jamvm/Config.in
@@ -12,4 +12,6 @@ config BR2_PACKAGE_JAMVM
http://jamvm.sf.net
comment "jamvm needs a toolchain w/ IPv6"
+ depends on BR2_arm || BR2_armeb || BR2_i386 \
+ || BR2_mipsel || BR2_powerpc || BR2_x86_64
depends on !BR2_INET_IPV6
diff --git a/package/kismet/Config.in b/package/kismet/Config.in
--- a/package/kismet/Config.in
+++ b/package/kismet/Config.in
@@ -1,4 +1,5 @@
comment "kismet needs a toolchain w/ threads, C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_KISMET
diff --git a/package/libdrm/Config.in b/package/libdrm/Config.in
--- a/package/libdrm/Config.in
+++ b/package/libdrm/Config.in
@@ -65,4 +65,5 @@ endmenu
endif
comment "libdrm needs a toolchain w/ largefile"
- depends on BR2_PACKAGE_XORG7 && !BR2_LARGEFILE
+ depends on BR2_PACKAGE_XORG7
+ depends on !BR2_LARGEFILE
diff --git a/package/libedit/Config.in b/package/libedit/Config.in
--- a/package/libedit/Config.in
+++ b/package/libedit/Config.in
@@ -16,4 +16,5 @@ config BR2_PACKAGE_LIBEDIT
http://www.thrysoee.dk/editline/
comment "libedit needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/libfslvpuwrap/Config.in b/package/libfslvpuwrap/Config.in
--- a/package/libfslvpuwrap/Config.in
+++ b/package/libfslvpuwrap/Config.in
@@ -1,5 +1,6 @@
comment "libfslvpuwrap needs an imx-specific kernel to be built"
- depends on BR2_arm && !BR2_LINUX_KERNEL
+ depends on BR2_arm
+ depends on !BR2_LINUX_KERNEL
config BR2_PACKAGE_LIBFSLVPUWRAP
bool "libfslvpuwrap"
diff --git a/package/libfuse/Config.in b/package/libfuse/Config.in
--- a/package/libfuse/Config.in
+++ b/package/libfuse/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_LIBFUSE
http://fuse.sourceforge.net/
comment "libfuse needs a toolchain w/ largefile, threads, dynamic library"
- depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
+ depends on BR2_USE_MMU
+ depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
diff --git a/package/libgail/Config.in b/package/libgail/Config.in
--- a/package/libgail/Config.in
+++ b/package/libgail/Config.in
@@ -20,5 +20,5 @@ config BR2_PACKAGE_LIBGAIL
http://developer.gnome.org/projects/gap
comment "libgail needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_LIBGTK2 && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_LIBGTK2
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libglade/Config.in b/package/libglade/Config.in
--- a/package/libglade/Config.in
+++ b/package/libglade/Config.in
@@ -14,5 +14,5 @@ config BR2_PACKAGE_LIBGLADE
http://ftp.gnome.org/pub/GNOME/sources/libglade/
comment "libglade needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_LIBGTK2 && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_LIBGTK2
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libgtk2/Config.in b/package/libgtk2/Config.in
--- a/package/libgtk2/Config.in
+++ b/package/libgtk2/Config.in
@@ -32,5 +32,6 @@ config BR2_PACKAGE_LIBGTK2_DEMO
endif
comment "libgtk2 needs a toolchain w/ wchar, threads, C++"
+ depends on BR2_PACKAGE_XORG7
depends on !BR2_USE_WCHAR || !BR2_INSTALL_LIBSTDCPP || \
!BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libnspr/Config.in b/package/libnspr/Config.in
--- a/package/libnspr/Config.in
+++ b/package/libnspr/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_LIBNSPR
http://www.mozilla.org/projects/nspr/
comment "libnspr needs a toolchain w/ largefile, threads"
+ depends on !BR2_arc
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libnss/Config.in b/package/libnss/Config.in
--- a/package/libnss/Config.in
+++ b/package/libnss/Config.in
@@ -16,5 +16,6 @@ config BR2_PACKAGE_LIBNSS
http://www.mozilla.org/projects/security/pki/nss/
comment "libnss needs a toolchain w/ largefile, threads"
+ depends on !BR2_arc
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libtirpc/Config.in b/package/libtirpc/Config.in
--- a/package/libtirpc/Config.in
+++ b/package/libtirpc/Config.in
@@ -15,4 +15,6 @@ config BR2_PACKAGE_LIBTIRPC
http://sourceforge.net/projects/libtirpc/
comment "libtirpc needs a toolchain w/ threads"
+ depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && \
+ !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/libunwind/Config.in b/package/libunwind/Config.in
--- a/package/libunwind/Config.in
+++ b/package/libunwind/Config.in
@@ -9,4 +9,6 @@ config BR2_PACKAGE_LIBUNWIND
http://www.nongnu.org/libunwind/index.html
comment "libunwind needs a toolchain w/ threads"
+ depends on BR2_arm || BR2_armeb || BR2_mips || BR2_mipsel || BR2_mips64 || \
+ BR2_mips64el || BR2_powerpc || BR2_sh || BR2_sh64 || BR2_i386 || BR2_x86_64
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/liburcu/Config.in b/package/liburcu/Config.in
--- a/package/liburcu/Config.in
+++ b/package/liburcu/Config.in
@@ -11,5 +11,6 @@ config BR2_PACKAGE_LIBURCU
http://lttng.org/urcu
comment "liburcu needs a toolchain w/ threads"
+ depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_x86_64
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/linknx/Config.in b/package/linknx/Config.in
--- a/package/linknx/Config.in
+++ b/package/linknx/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_LINKNX
http://linknx.sourceforge.net/
comment "linknx needs a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/linphone/Config.in b/package/linphone/Config.in
--- a/package/linphone/Config.in
+++ b/package/linphone/Config.in
@@ -27,5 +27,6 @@ config BR2_PACKAGE_LINPHONE
http://www.linphone.org/
comment "linphone needs a toolchain w/ threads, C++, IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || \
!BR2_INET_IPV6
diff --git a/package/lmbench/Config.in b/package/lmbench/Config.in
--- a/package/lmbench/Config.in
+++ b/package/lmbench/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_LMBENCH
http://sourceforge.net/projects/lmbench/
comment "lmbench needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !(BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_HAS_NATIVE_RPC)
diff --git a/package/logrotate/Config.in b/package/logrotate/Config.in
--- a/package/logrotate/Config.in
+++ b/package/logrotate/Config.in
@@ -9,5 +9,6 @@ config BR2_PACKAGE_LOGROTATE
https://fedorahosted.org/logrotate/
comment "logrotate needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/ltp-testsuite/Config.in b/package/ltp-testsuite/Config.in
--- a/package/ltp-testsuite/Config.in
+++ b/package/ltp-testsuite/Config.in
@@ -24,5 +24,6 @@ config BR2_PACKAGE_LTP_TESTSUITE
http://ltp.sourceforge.net/
comment "ltp-testsuite needs a toolchain w/ IPv6, RPC, largefile, threads"
- depends on (!BR2_TOOLCHAIN_HAS_THREADS || !BR2_INET_IPV6 || \
- !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_NATIVE_RPC) && !BR2_aarch64
+ depends on !BR2_aarch64
+ depends on !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INET_IPV6 || \
+ !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_NATIVE_RPC
diff --git a/package/lttng-babeltrace/Config.in b/package/lttng-babeltrace/Config.in
--- a/package/lttng-babeltrace/Config.in
+++ b/package/lttng-babeltrace/Config.in
@@ -28,5 +28,5 @@ config BR2_PACKAGE_LTTNG_BABELTRACE
http://lttng.org
comment "lttng-babeltrace needs a toolchain w/ wchar, threads, largefile"
- depends on BR2_PACKAGE_LTTNG_TOOLS && \
- (!BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_LTTNG_TOOLS
+ depends on !BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/lttng-libust/Config.in b/package/lttng-libust/Config.in
--- a/package/lttng-libust/Config.in
+++ b/package/lttng-libust/Config.in
@@ -18,5 +18,5 @@ config BR2_PACKAGE_LTTNG_LIBUST
http://lttng.org
comment "lttng-libust needs a toolchain w/ wchar, largefile, threads"
- depends on !(BR2_USE_WCHAR || BR2_LARGEFILE)
- depends on !BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_x86_64
+ depends on !BR2_USE_WCHAR || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/lttng-tools/Config.in b/package/lttng-tools/Config.in
--- a/package/lttng-tools/Config.in
+++ b/package/lttng-tools/Config.in
@@ -28,5 +28,6 @@ config BR2_PACKAGE_LTTNG_TOOLS
http://lttng.org
comment "lttng-tools needs a toolchain w/ largefile, threads, wchar"
+ depends on BR2_arm || BR2_armeb || BR2_i386 || BR2_powerpc || BR2_x86_64
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || \
!BR2_USE_WCHAR
diff --git a/package/lvm2/Config.in b/package/lvm2/Config.in
--- a/package/lvm2/Config.in
+++ b/package/lvm2/Config.in
@@ -30,4 +30,5 @@ config BR2_PACKAGE_LVM2_APP_LIBRARY
Install application library (liblvm2app).
comment "lvm2 needs a toolchain w/ largefile"
- depends on !BR2_LARGEFILE
+ depends on BR2_USE_MMU
+ depends on !BR2_LARGEFILE
diff --git a/package/lxc/Config.in b/package/lxc/Config.in
--- a/package/lxc/Config.in
+++ b/package/lxc/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_LXC
http://lxc.sourceforge.net/
comment "lxc needs a toolchain w/ IPv6, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/lzma/Config.in b/package/lzma/Config.in
--- a/package/lzma/Config.in
+++ b/package/lzma/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_LZMA
http://tukaani.org/lzma/
comment "lzma needs a toolchain w/ C++"
- depends on !BR2_INSTALL_LIBSTDCPP && BR2_DEPRECATED
+ depends on BR2_DEPRECATED
+ depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/m4/Config.in b/package/m4/Config.in
--- a/package/m4/Config.in
+++ b/package/m4/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_M4
http://www.gnu.org/software/m4/m4.html
comment "m4 needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/midori/Config.in b/package/midori/Config.in
--- a/package/midori/Config.in
+++ b/package/midori/Config.in
@@ -16,5 +16,7 @@ config BR2_PACKAGE_MIDORI
http://software.twotoasts.de/?page=midori
comment "midori needs libgtk2 and a toolchain w/ C++, wchar, threads"
- depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
+ depends on (BR2_arm || BR2_armeb || BR2_i386 || BR2_mips || BR2_mipsel || \
+ BR2_powerpc || BR2_sh || BR2_sparc || BR2_x86_64)
+ depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
!BR2_TOOLCHAIN_HAS_THREADS || !BR2_PACKAGE_LIBGTK2
diff --git a/package/minicom/Config.in b/package/minicom/Config.in
--- a/package/minicom/Config.in
+++ b/package/minicom/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_MINICOM
http://alioth.debian.org/projects/minicom
comment "minicom needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/minidlna/Config.in b/package/minidlna/Config.in
--- a/package/minidlna/Config.in
+++ b/package/minidlna/Config.in
@@ -19,4 +19,5 @@ config BR2_PACKAGE_MINIDLNA
http://minidlna.sourceforge.net/
comment "minidlna needs a toolchain w/ largefile, IPv6, threads"
+ depends on BR2_USE_MMU
depends on !(BR2_LARGEFILE && BR2_INET_IPV6 && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/mongoose/Config.in b/package/mongoose/Config.in
--- a/package/mongoose/Config.in
+++ b/package/mongoose/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_MONGOOSE
https://github.com/valenok/mongoose
comment "mongoose needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/mplayer/Config.in b/package/mplayer/Config.in
--- a/package/mplayer/Config.in
+++ b/package/mplayer/Config.in
@@ -26,4 +26,6 @@ config BR2_PACKAGE_MPLAYER_MENCODER
endif
comment "mplayer needs a toolchain w/ largefile"
+ depends on !(BR2_sh2 || BR2_sh2a || BR2_sh4a || BR2_sh4aeb \
+ || BR2_microblaze || BR2_aarch64)
depends on !BR2_LARGEFILE
diff --git a/package/mutt/Config.in b/package/mutt/Config.in
--- a/package/mutt/Config.in
+++ b/package/mutt/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_MUTT
http://www.mutt.org/
comment "mutt needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/mysql_client/Config.in b/package/mysql_client/Config.in
--- a/package/mysql_client/Config.in
+++ b/package/mysql_client/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_MYSQL_CLIENT
MySQL client
comment "MySQL client needs a toolchain w/ C++, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/ndisc6/Config.in b/package/ndisc6/Config.in
--- a/package/ndisc6/Config.in
+++ b/package/ndisc6/Config.in
@@ -1,4 +1,5 @@
comment "ndisc6 needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
config BR2_PACKAGE_NDISC6
diff --git a/package/neard/Config.in b/package/neard/Config.in
--- a/package/neard/Config.in
+++ b/package/neard/Config.in
@@ -24,4 +24,5 @@ config BR2_PACKAGE_NEARD_TOOLS
endif
comment "neard needs a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/neardal/Config.in b/package/neardal/Config.in
--- a/package/neardal/Config.in
+++ b/package/neardal/Config.in
@@ -21,4 +21,5 @@ config BR2_PACKAGE_NEARDAL_NCL
endif
comment "neardal needs a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/netatalk/Config.in b/package/netatalk/Config.in
--- a/package/netatalk/Config.in
+++ b/package/netatalk/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_NETATALK
http://netatalk.sourceforge.net/
comment "netatalk needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/netkitbase/Config.in b/package/netkitbase/Config.in
--- a/package/netkitbase/Config.in
+++ b/package/netkitbase/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_NETKITBASE
ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
comment "netkitbase needs a toolchain w/ RPC"
- depends on !BR2_TOOLCHAIN_HAS_NATIVE_RPC
+ depends on BR2_USE_MMU && BR2_DEPRECATED
+ depends on !BR2_TOOLCHAIN_HAS_NATIVE_RPC
diff --git a/package/netkittelnet/Config.in b/package/netkittelnet/Config.in
--- a/package/netkittelnet/Config.in
+++ b/package/netkittelnet/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_NETKITTELNET
ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
comment "netkittelnet needs a toolchain w/ RPC"
+ depends on BR2_DEPRECATED
depends on !BR2_TOOLCHAIN_HAS_NATIVE_RPC
diff --git a/package/network-manager/Config.in b/package/network-manager/Config.in
--- a/package/network-manager/Config.in
+++ b/package/network-manager/Config.in
@@ -28,5 +28,6 @@ config BR2_PACKAGE_NETWORK_MANAGER
http://projects.gnome.org/NetworkManager/
comment "NetworkManager needs a toolchain w/ IPv6, largefile, wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6 || !BR2_LARGEFILE || !BR2_USE_WCHAR || \
!BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/nfs-utils/Config.in b/package/nfs-utils/Config.in
--- a/package/nfs-utils/Config.in
+++ b/package/nfs-utils/Config.in
@@ -12,6 +12,7 @@ config BR2_PACKAGE_NFS_UTILS
http://sourceforge.net/projects/nfs
comment "nfs-utils needs a toolchain w/ largefile, threads"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || \
!(BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_HAS_NATIVE_RPC)
diff --git a/package/nmap/Config.in b/package/nmap/Config.in
--- a/package/nmap/Config.in
+++ b/package/nmap/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_NMAP
http://nmap.org
comment "nmap needs a toolchain w/ C++, IPv6, threads"
+ depends on BR2_USE_MMU
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/nodejs/Config.in b/package/nodejs/Config.in
--- a/package/nodejs/Config.in
+++ b/package/nodejs/Config.in
@@ -15,6 +15,9 @@ config BR2_PACKAGE_NODEJS
http://nodejs.org/
comment "nodejs needs a toolchain w/ C++, IPv6, largefile, threads"
+ depends on BR2_USE_MMU
+ depends on BR2_arm || BR2_i386 || BR2_x86_64
+ depends on !(BR2_arm7tdmi || BR2_arm720t || BR2_arm920t || BR2_arm922t || BR2_fa526)
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_LARGEFILE || \
!BR2_TOOLCHAIN_HAS_THREADS || !BR2_INET_IPV6
diff --git a/package/ntfs-3g/Config.in b/package/ntfs-3g/Config.in
--- a/package/ntfs-3g/Config.in
+++ b/package/ntfs-3g/Config.in
@@ -31,4 +31,5 @@ config BR2_PACKAGE_NTFS_3G_NTFSPROGS
endif
comment "ntfs-3g needs a toolchain w/ largefile, wchar, threads"
+ depends on BR2_USE_MMU
depends on !(BR2_LARGEFILE && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/numactl/Config.in b/package/numactl/Config.in
--- a/package/numactl/Config.in
+++ b/package/numactl/Config.in
@@ -13,4 +13,6 @@ config BR2_PACKAGE_NUMACTL
http://oss.sgi.com/projects/libnuma/
comment "numactl needs a toolchain w/ largefile"
+ depends on BR2_i386 || BR2_mips || BR2_mipsel || \
+ BR2_mips64 || BR2_mips64el || BR2_powerpc || BR2_x86_64
depends on !BR2_LARGEFILE
diff --git a/package/ofono/Config.in b/package/ofono/Config.in
--- a/package/ofono/Config.in
+++ b/package/ofono/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_OFONO
http://ofono.org/
comment "ofono needs a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/olsr/Config.in b/package/olsr/Config.in
--- a/package/olsr/Config.in
+++ b/package/olsr/Config.in
@@ -14,4 +14,5 @@ config BR2_PACKAGE_OLSR
http://www.olsr.org/
comment "olsr needs a toolchain w/ IPv6, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/on2-8170-modules/Config.in b/package/on2-8170-modules/Config.in
--- a/package/on2-8170-modules/Config.in
+++ b/package/on2-8170-modules/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_ON2_8170_MODULES
http://www.at91.com/linux4sam/bin/view/Linux4SAM/SAM9M10Gstreamer
comment "on2-8170 modules requires a linux kernel to be built"
+ depends on BR2_arm926t
depends on !BR2_LINUX_KERNEL
diff --git a/package/openobex/Config.in b/package/openobex/Config.in
--- a/package/openobex/Config.in
+++ b/package/openobex/Config.in
@@ -18,6 +18,7 @@ config BR2_PACKAGE_OPENOBEX_BLUEZ
select BR2_PACKAGE_BLUEZ_UTILS
comment "bluez support needs a toolchain w/ wchar, threads"
+ depends on !BR2_avr32 && BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_OPENOBEX_LIBUSB
diff --git a/package/openpowerlink/Config.in b/package/openpowerlink/Config.in
--- a/package/openpowerlink/Config.in
+++ b/package/openpowerlink/Config.in
@@ -1,4 +1,5 @@
comment "openpowerlink needs a toolchain w/ C++, threads"
+ depends on BR2_i386 || BR2_x86_64
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_OPENPOWERLINK
diff --git a/package/openvpn/Config.in b/package/openvpn/Config.in
--- a/package/openvpn/Config.in
+++ b/package/openvpn/Config.in
@@ -1,4 +1,5 @@
comment "openvpn needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
config BR2_PACKAGE_OPENVPN
diff --git a/package/oprofile/Config.in b/package/oprofile/Config.in
--- a/package/oprofile/Config.in
+++ b/package/oprofile/Config.in
@@ -23,4 +23,5 @@ config BR2_PACKAGE_OPROFILE
libraries, and applications.
comment "oprofile needs a toolchain w/ C++"
+ depends on BR2_USE_MMU && !BR2_aarch64
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/p11-kit/Config.in b/package/p11-kit/Config.in
--- a/package/p11-kit/Config.in
+++ b/package/p11-kit/Config.in
@@ -12,4 +12,5 @@ config BR2_PACKAGE_P11_KIT
http://p11-glue.freedesktop.org/p11-kit.html
comment "p11-kit needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/parted/Config.in b/package/parted/Config.in
--- a/package/parted/Config.in
+++ b/package/parted/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_PARTED
http://www.gnu.org/software/parted/
comment "parted needs a toolchain w/ largefile, wchar"
- depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)
+ depends on BR2_USE_MMU
+ depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)
diff --git a/package/pcmanfm/Config.in b/package/pcmanfm/Config.in
--- a/package/pcmanfm/Config.in
+++ b/package/pcmanfm/Config.in
@@ -14,5 +14,5 @@ config BR2_PACKAGE_PCMANFM
http://internap.dl.sourceforge.net/sourceforge/pcmanfm
comment "pcmanfm needs a toolchain w/ wchar, threads"
- depends on BR2_PACKAGE_XORG7 && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_PACKAGE_XORG7 && BR2_PACKAGE_LIBGTK2
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/pcsc-lite/Config.in b/package/pcsc-lite/Config.in
--- a/package/pcsc-lite/Config.in
+++ b/package/pcsc-lite/Config.in
@@ -29,4 +29,5 @@ config BR2_PACKAGE_PCSC_LITE_EMBEDDED
endif
comment "pcsc-lite needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/php/Config.ext b/package/php/Config.ext
--- a/package/php/Config.ext
+++ b/package/php/Config.ext
@@ -138,6 +138,7 @@ config BR2_PACKAGE_PHP_EXT_PDO_MYSQL
PDO driver for MySQL
comment "MySQL drivers need a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
config BR2_PACKAGE_PHP_EXT_PDO_SQLITE
diff --git a/package/pkg-config/Config.in b/package/pkg-config/Config.in
--- a/package/pkg-config/Config.in
+++ b/package/pkg-config/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_PKG_CONFIG
http://www.freedesktop.org/software/pkgconfig/
comment "pkg-config needs a toolchain w/ wchar, threads"
- depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_DEPRECATED
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/python-nfc/Config.in b/package/python-nfc/Config.in
--- a/package/python-nfc/Config.in
+++ b/package/python-nfc/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_PYTHON_NFC
https://launchpad.net/nfcpy
comment "python-nfc needs a toolchain w/ threads"
+ depends on BR2_PACKAGE_PYTHON
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/python-pyzmq/Config.in b/package/python-pyzmq/Config.in
--- a/package/python-pyzmq/Config.in
+++ b/package/python-pyzmq/Config.in
@@ -13,5 +13,6 @@ config BR2_PACKAGE_PYTHON_PYZMQ
http://zeromq.org/bindings:python
comment "python-pyzmq needs a toolchain w/ C++, IPv6, largefile, wchar, threads"
+ depends on BR2_PACKAGE_PYTHON
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_LARGEFILE \
&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/python/Config.in b/package/python/Config.in
--- a/package/python/Config.in
+++ b/package/python/Config.in
@@ -10,6 +10,7 @@ config BR2_PACKAGE_PYTHON
http://www.python.org/
comment "python needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
if BR2_PACKAGE_PYTHON
diff --git a/package/python3/Config.in b/package/python3/Config.in
--- a/package/python3/Config.in
+++ b/package/python3/Config.in
@@ -10,6 +10,7 @@ config BR2_PACKAGE_PYTHON3
http://www.python.org/
comment "python3 needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
if BR2_PACKAGE_PYTHON3
diff --git a/package/qt/Config.in b/package/qt/Config.in
--- a/package/qt/Config.in
+++ b/package/qt/Config.in
@@ -1,4 +1,5 @@
comment "qt needs a toolchain w/ C++, threads"
+ depends on !BR2_avr32
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS
menuconfig BR2_PACKAGE_QT
@@ -301,6 +302,7 @@ config BR2_PACKAGE_QT_DBUS
Build the Qt DBus module.
comment "DBus Module needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_QT_XML
diff --git a/package/qt5/Config.in b/package/qt5/Config.in
--- a/package/qt5/Config.in
+++ b/package/qt5/Config.in
@@ -1,4 +1,5 @@
comment "Qt5 needs a toolchain w/ wchar, IPv6, threads, C++"
+ depends on !BR2_PACKAGE_QT
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
menuconfig BR2_PACKAGE_QT5
diff --git a/package/quagga/Config.in b/package/quagga/Config.in
--- a/package/quagga/Config.in
+++ b/package/quagga/Config.in
@@ -15,7 +15,7 @@ config BR2_PACKAGE_QUAGGA_ZEBRA
Build zebra daemon.
comment "zebra daemon needs a toolchain w/ IPv6"
- depends on BR2_PACKAGE_QUAGGA && !BR2_INET_IPV6
+ depends on !BR2_INET_IPV6
config BR2_PACKAGE_QUAGGA_TCP_ZEBRA
bool "Use TCP sockets between zebra and protocol daemons"
diff --git a/package/quota/Config.in b/package/quota/Config.in
--- a/package/quota/Config.in
+++ b/package/quota/Config.in
@@ -16,6 +16,7 @@ config BR2_PACKAGE_QUOTA
http://sourceforge.net/projects/linuxquota/
comment "quota needs a toolchain w/ largefile, wchar, threads"
+ depends on BR2_USE_MMU && !(BR2_microblazeel || BR2_microblazebe)
depends on !BR2_LARGEFILE || \
!BR2_USE_WCHAR || \
!(BR2_TOOLCHAIN_HAS_THREADS || BR2_TOOLCHAIN_HAS_NATIVE_RPC)
diff --git a/package/radvd/Config.in b/package/radvd/Config.in
--- a/package/radvd/Config.in
+++ b/package/radvd/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_RADVD
http://www.litech.org/radvd/
comment "radvd needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
diff --git a/package/redis/Config.in b/package/redis/Config.in
--- a/package/redis/Config.in
+++ b/package/redis/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_REDIS
http://www.redis.io
comment "redis needs a toolchain w/ largefile, threads"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/rpcbind/Config.in b/package/rpcbind/Config.in
--- a/package/rpcbind/Config.in
+++ b/package/rpcbind/Config.in
@@ -13,4 +13,6 @@ config BR2_PACKAGE_RPCBIND
into universal addresses.
comment "rpcbind needs a toolchain w/ threads"
+ depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && \
+ !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/rpi-userland/Config.in b/package/rpi-userland/Config.in
--- a/package/rpi-userland/Config.in
+++ b/package/rpi-userland/Config.in
@@ -18,4 +18,5 @@ config BR2_PACKAGE_RPI_USERLAND
https://github.com/raspberrypi/userland/
comment "rpi-userland needs a toolchain w/ C++, largefile, threads"
+ depends on BR2_arm
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/rt-tests/Config.in b/package/rt-tests/Config.in
--- a/package/rt-tests/Config.in
+++ b/package/rt-tests/Config.in
@@ -23,4 +23,5 @@ config BR2_PACKAGE_RT_TESTS
http://rt.wiki.kernel.org
comment "rt-tests needs a toolchain w/ threads"
+ depends on !BR2_avr32
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/rtorrent/Config.in b/package/rtorrent/Config.in
--- a/package/rtorrent/Config.in
+++ b/package/rtorrent/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_RTORRENT
http://libtorrent.rakshasa.no/
comment "rtorrent needs a toolchain w/ C++, threads, wchar"
+ depends on BR2_USE_MMU
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/samba/Config.in b/package/samba/Config.in
--- a/package/samba/Config.in
+++ b/package/samba/Config.in
@@ -14,6 +14,7 @@ config BR2_PACKAGE_SAMBA
so choose only the components you need.
comment "samba needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
if BR2_PACKAGE_SAMBA
@@ -251,6 +252,7 @@ config BR2_PACKAGE_SAMBA_AVAHI
Include support for avahi
comment "support avahi - disabled (requires avahi-daemon)"
+ depends on BR2_USE_MMU
depends on !BR2_PACKAGE_AVAHI_DAEMON
config BR2_PACKAGE_SAMBA_GAMIN
diff --git a/package/ser2net/Config.in b/package/ser2net/Config.in
--- a/package/ser2net/Config.in
+++ b/package/ser2net/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_SER2NET
http://ser2net.sourceforge.net
comment "ser2net needs a toolchain w/ IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6
diff --git a/package/smartmontools/Config.in b/package/smartmontools/Config.in
--- a/package/smartmontools/Config.in
+++ b/package/smartmontools/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_SMARTMONTOOLS
http://smartmontools.sourceforge.net/
comment "smartmontools needs a toolchain w/ C++"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP
diff --git a/package/snowball-init/Config.in b/package/snowball-init/Config.in
--- a/package/snowball-init/Config.in
+++ b/package/snowball-init/Config.in
@@ -13,5 +13,5 @@ config BR2_PACKAGE_SNOWBALL_INIT
http://www.igloocommunity.org
comment "snowball-init needs a toolchain w/ wchar, threads"
- depends on !BR2_avr32 && \
- (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on !BR2_avr32 && BR2_USE_MMU
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/socat/Config.in b/package/socat/Config.in
--- a/package/socat/Config.in
+++ b/package/socat/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_SOCAT
http://www.dest-unreach.org/socat/
comment "socat needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/socketcand/Config.in b/package/socketcand/Config.in
--- a/package/socketcand/Config.in
+++ b/package/socketcand/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_SOCKETCAND
https://github.com/dschanoeh/socketcand
comment "socketcand needs a toolchain w/ threads"
+ depends on BR2_USE_MMU
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/sqlcipher/Config.in b/package/sqlcipher/Config.in
--- a/package/sqlcipher/Config.in
+++ b/package/sqlcipher/Config.in
@@ -10,9 +10,10 @@ config BR2_PACKAGE_SQLCIPHER
http://sqlcipher.net
+if BR2_PACKAGE_SQLCIPHER
+
config BR2_PACKAGE_SQLCIPHER_READLINE
bool "Command-line editing"
- depends on BR2_PACKAGE_SQLCIPHER
select BR2_PACKAGE_NCURSES
select BR2_PACKAGE_READLINE
help
@@ -20,14 +21,16 @@ config BR2_PACKAGE_SQLCIPHER_READLINE
config BR2_PACKAGE_SQLCIPHER_STAT3
bool "Additional query optimizations (stat3)"
- depends on BR2_PACKAGE_SQLCIPHER
help
Adds additional logic to the ANALYZE command and to the query
planner that can help SQLite to choose a better query plan under
certain situations.
+endif
+
comment "sqlcipher conflicts with sqlite"
depends on BR2_PACKAGE_SQLITE
comment "sqlcipher needs a toolchain w/ threads"
+ depends on !BR2_PACKAGE_SQLITE
depends on !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/squashfs3/Config.in b/package/squashfs3/Config.in
--- a/package/squashfs3/Config.in
+++ b/package/squashfs3/Config.in
@@ -8,4 +8,5 @@ config BR2_PACKAGE_SQUASHFS3
http://squashfs.sourceforge.net/
comment "squashfs3 needs a toolchain w/ largefile"
- depends on BR2_DEPRECATED && !BR2_LARGEFILE
+ depends on BR2_DEPRECATED
+ depends on !BR2_LARGEFILE
diff --git a/package/squid/Config.in b/package/squid/Config.in
--- a/package/squid/Config.in
+++ b/package/squid/Config.in
@@ -1,4 +1,5 @@
comment "squid needs a toolchain w/ C++, IPv6"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_INET_IPV6
config BR2_PACKAGE_SQUID
diff --git a/package/sshfs/Config.in b/package/sshfs/Config.in
--- a/package/sshfs/Config.in
+++ b/package/sshfs/Config.in
@@ -16,4 +16,5 @@ config BR2_PACKAGE_SSHFS
http://fuse.sourceforge.net/sshfs.html
comment "sshfs needs a toolchain w/ largefile, wchar, threads, dynamic library"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
diff --git a/package/synergy/Config.in b/package/synergy/Config.in
--- a/package/synergy/Config.in
+++ b/package/synergy/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_SYNERGY
http://synergy2.sourceforge.net/
comment "synergy needs a toolchain w/ C++, wchar"
- depends on BR2_PACKAGE_XORG7 && !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR)
+ depends on BR2_PACKAGE_XORG7
+ depends on !(BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR)
diff --git a/package/sysprof/Config.in b/package/sysprof/Config.in
--- a/package/sysprof/Config.in
+++ b/package/sysprof/Config.in
@@ -25,4 +25,5 @@ config BR2_PACKAGE_SYSPROF_GUI
endif
comment "sysprof needs a toolchain w/ wchar, threads"
- depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_i386 || BR2_x86_64 || BR2_powerpc || BR2_sh4a || BR2_sh4aeb
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/systemd/Config.in b/package/systemd/Config.in
--- a/package/systemd/Config.in
+++ b/package/systemd/Config.in
@@ -19,5 +19,6 @@ config BR2_PACKAGE_SYSTEMD
http://freedesktop.org/wiki/Software/systemd
comment "systemd needs udev /dev management and a toolchain w/ IPv6, threads"
+ depends on BR2_USE_MMU
depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV || !BR2_INET_IPV6 || \\
!BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/transmission/Config.in b/package/transmission/Config.in
--- a/package/transmission/Config.in
+++ b/package/transmission/Config.in
@@ -47,4 +47,5 @@ comment "transmission-gtk needs a toolch
endif
comment "transmission needs a toolchain w/ IPv6, threads"
+ depends on BR2_USE_MMU
depends on !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/tvheadend/Config.in b/package/tvheadend/Config.in
--- a/package/tvheadend/Config.in
+++ b/package/tvheadend/Config.in
@@ -1,5 +1,6 @@
comment "tvheadend needs a toolchain w/ largefile, IPv6, threads"
- depends on !BR2_LARGEFILE || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
+ depends on !BR2_avr32
+ depends on !BR2_LARGEFILE || !BR2_INET_IPV6 || !BR2_TOOLCHAIN_HAS_THREADS
config BR2_PACKAGE_TVHEADEND
bool "tvheadend"
diff --git a/package/udisks/Config.in b/package/udisks/Config.in
--- a/package/udisks/Config.in
+++ b/package/udisks/Config.in
@@ -36,5 +36,6 @@ config BR2_PACKAGE_UDISKS_LVM2
endif
comment "udisks needs udev /dev management and a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV || \
!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/udpcast/Config.in b/package/udpcast/Config.in
--- a/package/udpcast/Config.in
+++ b/package/udpcast/Config.in
@@ -10,6 +10,7 @@ config BR2_PACKAGE_UDPCAST
http://www.udpcast.linux.lu/
comment "udpcast needs a toolchain w/ largefile, threads"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS
menu "udpcast tools selection"
diff --git a/package/unionfs/Config.in b/package/unionfs/Config.in
--- a/package/unionfs/Config.in
+++ b/package/unionfs/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_UNIONFS
http://podgorny.cz/moin/UnionFsFuse
comment "unionfs needs a toolchain w/ largefile, threads, dynamic library"
+ depends on BR2_USE_MMU
depends on !BR2_LARGEFILE || !BR2_TOOLCHAIN_HAS_THREADS || BR2_PREFER_STATIC_LIB
diff --git a/package/ussp-push/Config.in b/package/ussp-push/Config.in
--- a/package/ussp-push/Config.in
+++ b/package/ussp-push/Config.in
@@ -15,4 +15,5 @@ config BR2_PACKAGE_USSP_PUSH
http://www.xmailserver.org/ussp-push.html
comment "ussp-push needs a toolchain w/ wchar, IPv6, threads"
+ depends on !BR2_avr32 && BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS || !BR2_INET_IPV6
diff --git a/package/vala/Config.in b/package/vala/Config.in
--- a/package/vala/Config.in
+++ b/package/vala/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_VALA
http://live.gnome.org/Vala
comment "vala needs a toolchain w/ wchar, threads"
- depends on BR2_DEPRECATED && (!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS)
+ depends on BR2_DEPRECATED
+ depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/webkit/Config.in b/package/webkit/Config.in
--- a/package/webkit/Config.in
+++ b/package/webkit/Config.in
@@ -29,5 +29,7 @@ config BR2_PACKAGE_WEBKIT
http://webkit.org/
comment "webkit needs libgtk2 and a toolchain w/ C++, wchar, threads"
+ depends on (BR2_arm || BR2_armeb || BR2_i386 || BR2_mips || BR2_mipsel || \
+ BR2_powerpc || BR2_sh || BR2_sparc || BR2_x86_64)
depends on !BR2_PACKAGE_LIBGTK2 || !BR2_INSTALL_LIBSTDCPP || \
!BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/webrtc-audio-processing/Config.in b/package/webrtc-audio-processing/Config.in
--- a/package/webrtc-audio-processing/Config.in
+++ b/package/webrtc-audio-processing/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_WEBRTC_AUDIO_PROCESSI
http://freedesktop.org/software/pulseaudio/webrtc-audio-processing/
comment "webrtc-audio-processing needs a toolchain w/ C++, threads"
+ depends on BR2_arm || BR2_i386 || BR2_x86_64
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/wget/Config.in b/package/wget/Config.in
--- a/package/wget/Config.in
+++ b/package/wget/Config.in
@@ -9,4 +9,5 @@ config BR2_PACKAGE_WGET
http://www.gnu.org/software/wget/
comment "wget needs a toolchain w/ wchar"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR
diff --git a/package/wireshark/Config.in b/package/wireshark/Config.in
--- a/package/wireshark/Config.in
+++ b/package/wireshark/Config.in
@@ -13,4 +13,5 @@ config BR2_PACKAGE_WIRESHARK
http://www.wireshark.org
comment "wireshark needs a toolchain w/ wchar, threads"
+ depends on BR2_USE_MMU
depends on !BR2_USE_WCHAR || !BR2_TOOLCHAIN_HAS_THREADS
diff --git a/package/wvdial/Config.in b/package/wvdial/Config.in
--- a/package/wvdial/Config.in
+++ b/package/wvdial/Config.in
@@ -10,4 +10,5 @@ config BR2_PACKAGE_WVDIAL
http://wvdial.googlecode.com/
comment "wvdial needs a toolchain w/ C++, largefile"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_LARGEFILE
diff --git a/package/wvstreams/Config.in b/package/wvstreams/Config.in
--- a/package/wvstreams/Config.in
+++ b/package/wvstreams/Config.in
@@ -11,4 +11,5 @@ config BR2_PACKAGE_WVSTREAMS
http://wvstreams.googlecode.com/
comment "wvstreams needs a toolchain w/ C++, largefile"
+ depends on BR2_USE_MMU
depends on !BR2_INSTALL_LIBSTDCPP || !BR2_LARGEFILE
diff --git a/package/xenomai/Config.in b/package/xenomai/Config.in
--- a/package/xenomai/Config.in
+++ b/package/xenomai/Config.in
@@ -1,5 +1,7 @@
comment "xenomai needs a toolchain w/ threads"
depends on !BR2_TOOLCHAIN_HAS_THREADS
+ depends on BR2_i386 || BR2_x86_64 || BR2_arm || \
+ BR2_bfin || BR2_powerpc || BR2_sh4
config BR2_PACKAGE_XENOMAI
bool "Xenomai Userspace"
diff --git a/package/xscreensaver/Config.in b/package/xscreensaver/Config.in
--- a/package/xscreensaver/Config.in
+++ b/package/xscreensaver/Config.in
@@ -19,4 +19,5 @@ config BR2_PACKAGE_XSCREENSAVER
http://www.jwz.org/xscreensaver/
comment "xscreensaver needs a toolchain w/ C++, threads"
+ depends on BR2_PACKAGE_XORG7
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/package/zmqpp/Config.in b/package/zmqpp/Config.in
--- a/package/zmqpp/Config.in
+++ b/package/zmqpp/Config.in
@@ -16,12 +16,14 @@ config BR2_PACKAGE_ZMQPP
http://github.com/benjamg/zmqpp
comment "zmqpp needs a toolchain w/ C++, IPv6, largefile, wchar, threads"
+ depends on !BR2_avr32
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_LARGEFILE \
&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
+if BR2_PACKAGE_ZMQPP
+
config BR2_PACKAGE_ZMQPP_CLIENT
bool "zmqpp client"
- depends on BR2_PACKAGE_ZMQPP
depends on BR2_TOOLCHAIN_HAS_THREADS # boost
select BR2_PACKAGE_BOOST
select BR2_PACKAGE_BOOST_PROGRAM_OPTIONS
@@ -30,4 +32,6 @@ config BR2_PACKAGE_ZMQPP_CLIENT
used to listen or send to zeromq sockets.
comment "zmqpp client needs a toolchain w/ threads"
- depends on BR2_PACKAGE_ZMQPP && !BR2_TOOLCHAIN_HAS_THREADS
+ depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+endif
diff --git a/package/zyre/Config.in b/package/zyre/Config.in
--- a/package/zyre/Config.in
+++ b/package/zyre/Config.in
@@ -17,5 +17,7 @@ config BR2_PACKAGE_ZYRE
http://zyre.org
comment "zyre needs a toolchain w/ C++, IPv6, largefile, wchar, threads"
+ depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R2 && \
+ !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2012R1
depends on !(BR2_INSTALL_LIBSTDCPP && BR2_INET_IPV6 && BR2_LARGEFILE \
&& BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS)
diff --git a/system/Config.in b/system/Config.in
--- a/system/Config.in
+++ b/system/Config.in
@@ -119,6 +119,7 @@ config BR2_INIT_SYSTEMD
select BR2_PACKAGE_SYSTEMD
comment 'systemd needs udev /dev management and a toolchain w/ largefile, wchar, IPv6, threads'
+ depends on BR2_USE_MMU
depends on !(BR2_LARGEFILE && BR2_USE_WCHAR && \
BR2_INET_IPV6 && BR2_TOOLCHAIN_HAS_THREADS && \
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV)
^ permalink raw reply [flat|nested] 5+ messages in thread