[Buildroot] X11 and buildroot..

Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed

* [Buildroot] X11 and buildroot..
@ 2009-05-06 12:42 Steffen Schulz
  2009-05-06 15:17 ` Peter Korsgaard
  0 siblings, 1 reply; 9+ messages in thread
From: Steffen Schulz @ 2009-05-06 12:42 UTC (permalink / raw)
  To: buildroot

Hi,

is there any buildroot configuration that gives me a working X11 using
the framebuffer?

I saw updates in the X11 area again for the current rc1, but I still
fail to compile anything using X11.

Currently, if I select tinyX and xserver, xfont-encodings will complain
about missing mkfontscale. If I add that to the dependencies, it still
complains since the binary is not copied to staging. Even then it seems
some shared libraries are missing that ldd fails to tell me about.

Qtopia simply exists with

The system floating point format could not be detected.
This may cause data to be generated in a wrong format
Turn on verbose messaging (-v) to see the final report.
X/Open Large File support cannot be enabled due to functionality tests!
 Turn on verbose messaging (-v) to ./configure to see the final report.
 If you believe this message is in error you may use the continue
 switch (-continue) to ./configure to continue.

I tried this months ago and ran from one problem into the other, with
no end in sight. I'm not particulary good with autotools, but the
regular updates seem to suggest that some people got this working?

Thanks,
Steffen
-- 
pepe at unixfan.net                            gpg --recv-key A04D7875
Key fingerprint: B805 57BE E4AF 0104 CC51  77A1 CE6F 8D46 A04D 7875

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-06 12:42 [Buildroot] X11 and buildroot Steffen Schulz
@ 2009-05-06 15:17 ` Peter Korsgaard
  2009-05-06 16:09   ` Steffen Schulz
  2009-05-07  8:29   ` Steffen Schulz
  0 siblings, 2 replies; 9+ messages in thread
From: Peter Korsgaard @ 2009-05-06 15:17 UTC (permalink / raw)
  To: buildroot

>>>>> "Steffen" == Steffen Schulz <pepe_ml@gmx.net> writes:

 Steffen> Hi,

 Steffen> is there any buildroot configuration that gives me a working
 Steffen> X11 using the framebuffer?

 Steffen> I saw updates in the X11 area again for the current rc1, but
 Steffen> I still fail to compile anything using X11.

Strange, it works here ..

 Steffen> Currently, if I select tinyX and xserver, xfont-encodings
 Steffen> will complain about missing mkfontscale. If I add that to
 Steffen> the dependencies, it still complains since the binary is not
 Steffen> copied to staging. Even then it seems some shared libraries
 Steffen> are missing that ldd fails to tell me about.

Hmm, maybe it needs it at build time, E.G. present on the host. Do you
have it installed on your host? Send your .config and I'll give it a
try, we should probably build it for the host as well.

 Steffen> Qtopia simply exists with

 Steffen> The system floating point format could not be detected.
 Steffen> This may cause data to be generated in a wrong format
 Steffen> Turn on verbose messaging (-v) to see the final report.
 Steffen> X/Open Large File support cannot be enabled due to functionality tests!
 Steffen>  Turn on verbose messaging (-v) to ./configure to see the final report.
 Steffen>  If you believe this message is in error you may use the continue
 Steffen>  switch (-continue) to ./configure to continue.

At build time or runtime? Again, send you .config.

 Steffen> I tried this months ago and ran from one problem into the
 Steffen> other, with no end in sight. I'm not particulary good with
 Steffen> autotools, but the regular updates seem to suggest that some
 Steffen> people got this working?

It works here (on real hw and in qemu).

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-06 15:17 ` Peter Korsgaard
@ 2009-05-06 16:09   ` Steffen Schulz
  2009-05-07  8:29   ` Steffen Schulz
  1 sibling, 0 replies; 9+ messages in thread
From: Steffen Schulz @ 2009-05-06 16:09 UTC (permalink / raw)
  To: buildroot

On 090506 at 17:30, Peter Korsgaard wrote:
> >>>>> "Steffen" == Steffen Schulz <pepe_ml@gmx.net> writes:
> 
>  Steffen> is there any buildroot configuration that gives me a working
>  Steffen> X11 using the framebuffer?
> 
>  Steffen> I saw updates in the X11 area again for the current rc1, but
>  Steffen> I still fail to compile anything using X11.
> 
> Strange, it works here ..

That is good to hear. Care to send a sample .config?

>  Steffen> Currently, if I select tinyX and xserver, xfont-encodings
>  Steffen> will complain about missing mkfontscale. If I add that to
>  Steffen> the dependencies, it still complains since the binary is not
>  Steffen> copied to staging. Even then it seems some shared libraries
>  Steffen> are missing that ldd fails to tell me about.
> Hmm, maybe it needs it at build time, E.G. present on the host. Do you
> have it installed on your host? Send your .config and I'll give it a
> try, we should probably build it for the host as well.
 
I have mkfontscale on the host. And when I copy it from the build
directory to staging, it is used by xfont_encodings. But libs are
missing. I tried and failed so often with previous svn versions
that I did not investigate further.

My .config is very simple since I just wanted to see if the build is
getting somewhere. For X11, I activated TinyX and then xorg-server.
This pulls in several libraries and needs i18n, WCHAR etc.

The qtopia error is also at compile time. It might just work if I
enable that funny switch, but since it is not enabled it seems this is
not a common problem either.

I essentially need a minimal X using fbdev so that I can try to port
some apps(virt-manager and a ton of dependencies)..


/steffen
-- 
pepe at unixfan.net                            gpg --recv-key A04D7875
Key fingerprint: B805 57BE E4AF 0104 CC51  77A1 CE6F 8D46 A04D 7875
-------------- next part --------------
#
# Automatically generated make config: don't edit
# Wed May  6 16:10:40 2009
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2009.05-rc1"
# BR2_alpha is not set
# BR2_arm is not set
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
BR2_i386=y
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_x86_i386 is not set
# BR2_x86_i486 is not set
# BR2_x86_i586 is not set
BR2_x86_i686=y
# BR2_x86_pentiumpro is not set
# BR2_x86_pentium_mmx is not set
# BR2_x86_pentium_m is not set
# BR2_x86_pentium2 is not set
# BR2_x86_pentium3 is not set
# BR2_x86_pentium4 is not set
# BR2_x86_prescott is not set
# BR2_x86_nocona is not set
# BR2_x86_core2 is not set
# BR2_x86_k6 is not set
# BR2_x86_k6_2 is not set
# BR2_x86_athlon is not set
# BR2_x86_athlon_4 is not set
# BR2_x86_opteron is not set
# BR2_x86_opteron_sse3 is not set
# BR2_x86_barcelona is not set
# BR2_x86_geode is not set
# BR2_x86_c3 is not set
# BR2_x86_winchip_c6 is not set
# BR2_x86_winchip2 is not set
BR2_ARCH="i686"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="i686"
BR2_GCC_TARGET_ARCH="i686"

#
# Target options
#

#
# Project Options
#
BR2_PROJECT="uclibc"
BR2_HOSTNAME="uclibc"
BR2_BANNER="Welcome to Buildroot"

#
# Preset Devices
#
# BR2_TARGET_AMD is not set
# BR2_TARGET_X86 is not set

#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set

#
# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
# BR2_TARGET_GENERIC_GETTY is not set

#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_COPYTO=""

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"

#
# Atmel Mirrors
#
BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot/"
BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
# BR2_FPU_SUFFIX is not set
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=1
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
BR2_RECENT=y
# BR2_CONFIG_CACHE is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_UPDATE_CONFIG=y

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
BR2_TOOLCHAIN_SOURCE=y
BR2_EXT_GCC_VERSION_4_1_2=y
BR2_EXT_GCC_VERSION_4_2_1=y
BR2_EXT_GCC_VERSION_4_2_2=y
BR2_EXT_GCC_VERSION_4_2_3=y
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_BINUTILS_VERSION_2_18=y
BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
BR2_EXT_UCLIBC_VERSION_0_9_30=y
BR2_EXT_UCLIBC_VERSION_0_9_30_1=y

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_23 is not set
# BR2_KERNEL_HEADERS_2_6_24 is not set
# BR2_KERNEL_HEADERS_2_6_25 is not set
# BR2_KERNEL_HEADERS_2_6_26 is not set
# BR2_KERNEL_HEADERS_2_6_27 is not set
# BR2_KERNEL_HEADERS_2_6_28 is not set
BR2_KERNEL_HEADERS_2_6_29=y
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.29.2"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_UCLIBC_VERSION_0_9_29 is not set
# BR2_UCLIBC_VERSION_0_9_30 is not set
BR2_UCLIBC_VERSION_0_9_30_1=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.30.1"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_PROGRAM_INVOCATION is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
# BR2_BINUTILS_VERSION_2_18 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
# BR2_BINUTILS_VERSION_2_19 is not set
BR2_BINUTILS_VERSION_2_19_1=y
BR2_BINUTILS_VERSION="2.19.1"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_2 is not set
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_1 is not set
# BR2_GCC_VERSION_4_3_2 is not set
BR2_GCC_VERSION_4_3_3=y
# BR2_GCC_VERSION_4_4_X is not set
BR2_GCC_SUPPORTS_SYSROOT=y
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.3"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y

#
# Ccache Options
#
# BR2_CCACHE is not set

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set

#
# Common Toolchain Options
#
BR2_LARGEFILE=y
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
BR2_ENABLE_LOCALE=y
# BR2_ENABLE_LOCALE_PREGENERATED is not set
BR2_ENABLE_LOCALE_PURGE=y
BR2_ENABLE_LOCALE_WHITELIST="C en_US"
BR2_USE_WCHAR=y
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_INSTALL_LIBSTDCPP is not set
BR2_TARGET_OPTIMIZATION="-Os -pipe"
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
# BR2_ENABLE_MULTILIB is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_12_X is not set
# BR2_BUSYBOX_VERSION_1_13_X is not set
BR2_BUSYBOX_VERSION_1_14_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.14.0"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
# BR2_PACKAGE_BUSYBOX_SKELETON is not set

#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_MAKE is not set

#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set

#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PCRE is not set

#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set

#
# icu requires a toolchain with C++ support and WCHAR enabled
#
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBOIL is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set

#
# Database
#

#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLITE is not set

#
# Networking
#

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set

#
# iperf requires a toolchain with C++ support enabled
#

#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set

#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MDNSRESPONDER is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NEON is not set

#
# netkitbase requires a toolchain with RPC support
#
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set

#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set

#
# quagga suite
#
# BR2_PACKAGE_QUAGGA_ZEBRA is not set
# BR2_PACKAGE_QUAGGA_BGPD is not set
# BR2_PACKAGE_QUAGGA_RIPD is not set
# BR2_PACKAGE_QUAGGA_RIPNGD is not set
# BR2_PACKAGE_QUAGGA_OSPFD is not set
# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
# BR2_PACKAGE_QUAGGA_ISISD is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set

#
# Hardware handling / blockdevices and filesystem maintenance
#
# BR2_PACKAGE_ACPID is not set
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DM is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_E2FSPROGS is not set
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# asterisk	- disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_FESTIVAL is not set

#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_VLC is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# text rendering libraries
#
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set

#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
BR2_PACKAGE_LIBPNG=y
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_LINUX_FUSION is not set
BR2_PACKAGE_PIXMAN=y
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_TIFF is not set

#
# busybox graphic applications
#

#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set

#
# other GUIs
#

#
# qtopia4 requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_XSERVER_none is not set
# BR2_PACKAGE_XSERVER_xorg is not set
BR2_PACKAGE_XSERVER_tinyx=y
BR2_X11_PREFIX="/usr"
BR2_PACKAGE_XORG7=y

#
# X11R7 Servers
#
BR2_PACKAGE_XSERVER_XORG_SERVER=y
# BR2_PACKAGE_XSERVER_XORG_SERVER_NULL_CURSOR is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_BUILTIN_FONTS is not set
# BR2_PACKAGE_XSERVER_XORG_SERVER_AIGLX is not set

#
# X11R7 Libraries
#
BR2_PACKAGE_LIBXCB=y
# BR2_PACKAGE_MESA3D is not set
BR2_PACKAGE_PTHREAD_STUBS=y
# BR2_PACKAGE_XCB_UTIL is not set
# BR2_PACKAGE_XLIB_LIBFS is not set
BR2_PACKAGE_XLIB_LIBICE=y
BR2_PACKAGE_XLIB_LIBSM=y
BR2_PACKAGE_XLIB_LIBX11=y
BR2_PACKAGE_XLIB_LIBXSCRNSAVER=y
# BR2_PACKAGE_XLIB_LIBXTRAP is not set
BR2_PACKAGE_XLIB_LIBXAU=y
BR2_PACKAGE_XLIB_LIBXAW=y
# BR2_PACKAGE_XLIB_LIBXCOMPOSITE is not set
# BR2_PACKAGE_XLIB_LIBXCURSOR is not set
# BR2_PACKAGE_XLIB_LIBXDAMAGE is not set
BR2_PACKAGE_XLIB_LIBXDMCP=y
# BR2_PACKAGE_XLIB_LIBXEVIE is not set
BR2_PACKAGE_XLIB_LIBXEXT=y
BR2_PACKAGE_XLIB_LIBXFIXES=y
BR2_PACKAGE_XLIB_LIBXFONT=y
# BR2_PACKAGE_XLIB_LIBXFONTCACHE is not set
# BR2_PACKAGE_XLIB_LIBXFT is not set
BR2_PACKAGE_XLIB_LIBXI=y
# BR2_PACKAGE_XLIB_LIBXINERAMA is not set
BR2_PACKAGE_XLIB_LIBXMU=y
BR2_PACKAGE_XLIB_LIBXP=y
BR2_PACKAGE_XLIB_LIBXPM=y
# BR2_PACKAGE_XLIB_LIBXPRINTAPPUTIL is not set
# BR2_PACKAGE_XLIB_LIBXPRINTUTIL is not set
# BR2_PACKAGE_XLIB_LIBXRANDR is not set
BR2_PACKAGE_XLIB_LIBXRENDER=y
BR2_PACKAGE_XLIB_LIBXRES=y
BR2_PACKAGE_XLIB_LIBXT=y
# BR2_PACKAGE_XLIB_LIBXTST is not set
# BR2_PACKAGE_XLIB_LIBXV is not set
# BR2_PACKAGE_XLIB_LIBXVMC is not set
# BR2_PACKAGE_XLIB_LIBXXF86DGA is not set
BR2_PACKAGE_XLIB_LIBXXF86MISC=y
BR2_PACKAGE_XLIB_LIBXXF86VM=y
# BR2_PACKAGE_XLIB_LIBDMX is not set
BR2_PACKAGE_XLIB_LIBFONTENC=y
BR2_PACKAGE_XLIB_LIBLBXUTIL=y
# BR2_PACKAGE_XLIB_LIBOLDX is not set
BR2_PACKAGE_XLIB_LIBXKBFILE=y
BR2_PACKAGE_XLIB_LIBXKBUI=y
BR2_PACKAGE_XLIB_XTRANS=y
# BR2_PACKAGE_XLIB_LIBPCIACCESS is not set

#
# X11R7 Applications
#
# BR2_PACKAGE_XAPP_APPRES is not set
# BR2_PACKAGE_XAPP_BDFTOPCF is not set
# BR2_PACKAGE_XAPP_BEFORELIGHT is not set
# BR2_PACKAGE_XAPP_BITMAP is not set
# BR2_PACKAGE_XAPP_EDITRES is not set
# BR2_PACKAGE_XAPP_FONTTOSFNT is not set
# BR2_PACKAGE_XAPP_FSLSFONTS is not set
# BR2_PACKAGE_XAPP_FSTOBDF is not set
# BR2_PACKAGE_XAPP_ICEAUTH is not set
# BR2_PACKAGE_XAPP_ICO is not set
# BR2_PACKAGE_XAPP_LBXPROXY is not set
# BR2_PACKAGE_XAPP_LISTRES is not set
# BR2_PACKAGE_XAPP_LUIT is not set
# BR2_PACKAGE_XAPP_MKFONTDIR is not set
# BR2_PACKAGE_XAPP_MKFONTSCALE is not set
# BR2_PACKAGE_XAPP_OCLOCK is not set
# BR2_PACKAGE_XAPP_PROXYMNGR is not set
# BR2_PACKAGE_XAPP_RGB is not set
# BR2_PACKAGE_XAPP_RSTART is not set
# BR2_PACKAGE_XAPP_SCRIPTS is not set
# BR2_PACKAGE_XAPP_SESSREG is not set
# BR2_PACKAGE_XAPP_SETXKBMAP is not set
# BR2_PACKAGE_XAPP_SHOWFONT is not set
# BR2_PACKAGE_XAPP_SMPROXY is not set
# BR2_PACKAGE_XAPP_TWM is not set
# BR2_PACKAGE_XAPP_VIEWRES is not set
# BR2_PACKAGE_XAPP_X11PERF is not set
# BR2_PACKAGE_XAPP_XAUTH is not set
# BR2_PACKAGE_XAPP_XBACKLIGHT is not set
# BR2_PACKAGE_XAPP_XBIFF is not set
# BR2_PACKAGE_XAPP_XCALC is not set
# BR2_PACKAGE_XAPP_XCLIPBOARD is not set
# BR2_PACKAGE_XAPP_XCLOCK is not set
# BR2_PACKAGE_XAPP_XCMSDB is not set
# BR2_PACKAGE_XAPP_XCURSORGEN is not set
# BR2_PACKAGE_XAPP_XDBEDIZZY is not set
# BR2_PACKAGE_XAPP_XDITVIEW is not set
# BR2_PACKAGE_XAPP_XDM is not set
# BR2_PACKAGE_XAPP_XDPYINFO is not set
# BR2_PACKAGE_XAPP_XDRIINFO is not set
# BR2_PACKAGE_XAPP_XEDIT is not set
# BR2_PACKAGE_XAPP_XEV is not set
# BR2_PACKAGE_XAPP_XEYES is not set
# BR2_PACKAGE_XAPP_XF86DGA is not set
# BR2_PACKAGE_XAPP_XFD is not set
# BR2_PACKAGE_XAPP_XFINDPROXY is not set
# BR2_PACKAGE_XAPP_XFONTSEL is not set
# BR2_PACKAGE_XAPP_XFS is not set
# BR2_PACKAGE_XAPP_XFSINFO is not set
# BR2_PACKAGE_XAPP_XFWP is not set
# BR2_PACKAGE_XAPP_XGAMMA is not set
# BR2_PACKAGE_XAPP_XGC is not set
# BR2_PACKAGE_XAPP_XHOST is not set
# BR2_PACKAGE_XAPP_XINIT is not set
# BR2_PACKAGE_XAPP_XINPUT is not set
# BR2_PACKAGE_XAPP_XKBCOMP is not set
# BR2_PACKAGE_XAPP_XKBEVD is not set
# BR2_PACKAGE_XAPP_XKBPRINT is not set
# BR2_PACKAGE_XAPP_XKBUTILS is not set
# BR2_PACKAGE_XAPP_XKILL is not set
# BR2_PACKAGE_XAPP_XLOAD is not set
# BR2_PACKAGE_XAPP_XLOGO is not set
# BR2_PACKAGE_XAPP_XLSATOMS is not set
# BR2_PACKAGE_XAPP_XLSCLIENTS is not set
# BR2_PACKAGE_XAPP_XLSFONTS is not set
# BR2_PACKAGE_XAPP_XMAG is not set
# BR2_PACKAGE_XAPP_XMAN is not set
# BR2_PACKAGE_XAPP_XMESSAGE is not set
# BR2_PACKAGE_XAPP_XMH is not set
# BR2_PACKAGE_XAPP_XMODMAP is not set
# BR2_PACKAGE_XAPP_XMORE is not set
# BR2_PACKAGE_XAPP_XPHELLOWORLD is not set
# BR2_PACKAGE_XAPP_XPLSPRINTERS is not set
# BR2_PACKAGE_XAPP_XPR is not set
# BR2_PACKAGE_XAPP_XPREHASHPRINTERLIST is not set
# BR2_PACKAGE_XAPP_XPROP is not set
# BR2_PACKAGE_XAPP_XRANDR is not set
# BR2_PACKAGE_XAPP_XRDB is not set
# BR2_PACKAGE_XAPP_XREFRESH is not set
# BR2_PACKAGE_XAPP_XRX is not set
# BR2_PACKAGE_XAPP_XSET is not set
# BR2_PACKAGE_XAPP_XSETMODE is not set
# BR2_PACKAGE_XAPP_XSETPOINTER is not set
# BR2_PACKAGE_XAPP_XSETROOT is not set
# BR2_PACKAGE_XAPP_XSM is not set
# BR2_PACKAGE_XAPP_XSTDCMAP is not set
# BR2_PACKAGE_XAPP_XTRAP is not set
# BR2_PACKAGE_XAPP_XVIDTUNE is not set
# BR2_PACKAGE_XAPP_XVINFO is not set
# BR2_PACKAGE_XAPP_XWD is not set
# BR2_PACKAGE_XAPP_XWININFO is not set
# BR2_PACKAGE_XAPP_XWUD is not set

#
# X11R7 Fonts
#
# BR2_PACKAGE_XFONT_FONT_UTIL is not set
BR2_PACKAGE_XFONT_ENCODINGS=y
# BR2_PACKAGE_XFONT_FONT_ADOBE_100DPI is not set
# BR2_PACKAGE_XFONT_FONT_ADOBE_75DPI is not set
# BR2_PACKAGE_XFONT_FONT_ADOBE_UTOPIA_100DPI is not set
# BR2_PACKAGE_XFONT_FONT_ADOBE_UTOPIA_75DPI is not set
# BR2_PACKAGE_XFONT_FONT_ADOBE_UTOPIA_TYPE1 is not set
BR2_PACKAGE_XFONT_FONT_ALIAS=y
# BR2_PACKAGE_XFONT_FONT_ARABIC_MISC is not set
# BR2_PACKAGE_XFONT_FONT_BH_100DPI is not set
# BR2_PACKAGE_XFONT_FONT_BH_75DPI is not set
# BR2_PACKAGE_XFONT_FONT_BH_LUCIDATYPEWRITER_100DPI is not set
# BR2_PACKAGE_XFONT_FONT_BH_LUCIDATYPEWRITER_75DPI is not set
# BR2_PACKAGE_XFONT_FONT_BH_TTF is not set
# BR2_PACKAGE_XFONT_FONT_BH_TYPE1 is not set
# BR2_PACKAGE_XFONT_FONT_BITSTREAM_100DPI is not set
# BR2_PACKAGE_XFONT_FONT_BITSTREAM_75DPI is not set
# BR2_PACKAGE_XFONT_FONT_BITSTREAM_SPEEDO is not set
# BR2_PACKAGE_XFONT_FONT_BITSTREAM_TYPE1 is not set
# BR2_PACKAGE_XFONT_FONT_CRONYX_CYRILLIC is not set
BR2_PACKAGE_XFONT_FONT_CURSOR_MISC=y
# BR2_PACKAGE_XFONT_FONT_DAEWOO_MISC is not set
# BR2_PACKAGE_XFONT_FONT_DEC_MISC is not set
# BR2_PACKAGE_XFONT_FONT_IBM_TYPE1 is not set
# BR2_PACKAGE_XFONT_FONT_ISAS_MISC is not set
# BR2_PACKAGE_XFONT_FONT_JIS_MISC is not set
# BR2_PACKAGE_XFONT_FONT_MICRO_MISC is not set
# BR2_PACKAGE_XFONT_FONT_MISC_CYRILLIC is not set
# BR2_PACKAGE_XFONT_FONT_MISC_ETHIOPIC is not set
# BR2_PACKAGE_XFONT_FONT_MISC_MELTHO is not set
BR2_PACKAGE_XFONT_FONT_MISC_MISC=y
# BR2_PACKAGE_XFONT_FONT_MUTT_MISC is not set
# BR2_PACKAGE_XFONT_FONT_SCHUMACHER_MISC is not set
# BR2_PACKAGE_XFONT_FONT_SCREEN_CYRILLIC is not set
# BR2_PACKAGE_XFONT_FONT_SONY_MISC is not set
# BR2_PACKAGE_XFONT_FONT_SUN_MISC is not set
# BR2_PACKAGE_XFONT_FONT_WINITZKI_CYRILLIC is not set
# BR2_PACKAGE_XFONT_FONT_XFREE86_TYPE1 is not set

#
# X11R7 X protocols
#
BR2_PACKAGE_XCB_PROTO=y
# BR2_PACKAGE_XPROTO_APPLEWMPROTO is not set
BR2_PACKAGE_XPROTO_BIGREQSPROTO=y
BR2_PACKAGE_XPROTO_COMPOSITEPROTO=y
BR2_PACKAGE_XPROTO_DAMAGEPROTO=y
# BR2_PACKAGE_XPROTO_DMXPROTO is not set
BR2_PACKAGE_XPROTO_EVIEEXT=y
BR2_PACKAGE_XPROTO_FIXESPROTO=y
BR2_PACKAGE_XPROTO_FONTCACHEPROTO=y
BR2_PACKAGE_XPROTO_FONTSPROTO=y
BR2_PACKAGE_XPROTO_GLPROTO=y
BR2_PACKAGE_XPROTO_INPUTPROTO=y
BR2_PACKAGE_XPROTO_KBPROTO=y
BR2_PACKAGE_XPROTO_PRINTPROTO=y
BR2_PACKAGE_XPROTO_RANDRPROTO=y
# BR2_PACKAGE_XPROTO_RECORDPROTO is not set
BR2_PACKAGE_XPROTO_RENDERPROTO=y
BR2_PACKAGE_XPROTO_RESOURCEPROTO=y
BR2_PACKAGE_XPROTO_SCRNSAVERPROTO=y
# BR2_PACKAGE_XPROTO_TRAPPROTO is not set
BR2_PACKAGE_XPROTO_VIDEOPROTO=y
# BR2_PACKAGE_XPROTO_WINDOWSWMPROTO is not set
BR2_PACKAGE_XPROTO_XCMISCPROTO=y
BR2_PACKAGE_XPROTO_XEXTPROTO=y
BR2_PACKAGE_XPROTO_XF86BIGFONTPROTO=y
BR2_PACKAGE_XPROTO_XF86DGAPROTO=y
BR2_PACKAGE_XPROTO_XF86DRIPROTO=y
BR2_PACKAGE_XPROTO_XF86MISCPROTO=y
BR2_PACKAGE_XPROTO_XF86RUSHPROTO=y
BR2_PACKAGE_XPROTO_XF86VIDMODEPROTO=y
# BR2_PACKAGE_XPROTO_XINERAMAPROTO is not set
BR2_PACKAGE_XPROTO_XPROTO=y
# BR2_PACKAGE_XPROTO_XPROXYMANAGEMENTPROTOCOL is not set

#
# X11R7 Utilities
#
# BR2_PACKAGE_XUTIL_MAKEDEPEND is not set
BR2_PACKAGE_XUTIL_UTIL_MACROS=y
# BR2_PACKAGE_MCOOKIE is not set

#
# X11R7 Other data
#
BR2_PACKAGE_XDATA_XBITMAPS=y
# BR2_PACKAGE_XDATA_XCURSOR_THEMES is not set
# BR2_PACKAGE_XKEYBOARD_CONFIG is not set

#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
BR2_PACKAGE_LIBDRM=y
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBGTK12 is not set
# BR2_PACKAGE_LIBGTK2 is not set
# BR2_PACKAGE_FLTK is not set
# BR2_PACKAGE_OPENMOTIF is not set
BR2_PACKAGE_FONTCONFIG=y
BR2_PACKAGE_FREETYPE=y
# BR2_PACKAGE_TSLIB is not set

#
# webkit requires a toolchain with C++ support and WCHAR enabled
#

#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set
# BR2_PACKAGE_METACITY is not set

#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set

#
# dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
#
# BR2_PACKAGE_DOCKER is not set
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_GOB2 is not set
# BR2_PACKAGE_LEAFPAD is not set
# BR2_PACKAGE_MIDORI is not set
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_RDESKTOP is not set
# BR2_PACKAGE_RXVT is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_SYNERGY is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set
# BR2_PACKAGE_XVKBD is not set

#
# Compressors / decompressors
#
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_LZOP is not set

#
# lzma requires a toolchain with C++ support
#
# BR2_PACKAGE_LZMA_HOST is not set
BR2_PACKAGE_ZLIB=y
# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_PORTAGE is not set

#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set

#
# XML handling
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set

#
# xerces-c++ requires a toolchain with C++ support enabled
#

#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set

#
# Games
#
# BR2_PACKAGE_ACE_OF_PENGUINS is not set
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_LXDOOM is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_VICE is not set
# BR2_PACKAGE_XBOARD is not set

#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="rootfs"
BR2_ROOTFS_SUFFIX=""

#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
BR2_TARGET_ROOTFS_EXT2_COPYTO=""
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_ISO9660 is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# bootloader for target device
#
# BR2_TARGET_GRUB is not set
# BR2_TARGET_SYSLINUX is not set
# BR2_TARGET_PXELINUX is not set
# BR2_TARGET_UBOOT is not set

#
# Kernel
#
BR2_KERNEL_none=y
# BR2_KERNEL_LINUX_ADVANCED is not set
# BR2_KERNEL_LINUX is not set
# BR2_KERNEL_HURD is not set
-------------- next part --------------
#
# Automatically generated make config: don't edit
# Wed May  6 12:33:38 2009
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2009.05-rc1"
# BR2_alpha is not set
# BR2_arm is not set
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
BR2_i386=y
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_x86_i386 is not set
# BR2_x86_i486 is not set
# BR2_x86_i586 is not set
BR2_x86_i686=y
# BR2_x86_pentiumpro is not set
# BR2_x86_pentium_mmx is not set
# BR2_x86_pentium_m is not set
# BR2_x86_pentium2 is not set
# BR2_x86_pentium3 is not set
# BR2_x86_pentium4 is not set
# BR2_x86_prescott is not set
# BR2_x86_nocona is not set
# BR2_x86_core2 is not set
# BR2_x86_k6 is not set
# BR2_x86_k6_2 is not set
# BR2_x86_athlon is not set
# BR2_x86_athlon_4 is not set
# BR2_x86_opteron is not set
# BR2_x86_opteron_sse3 is not set
# BR2_x86_barcelona is not set
# BR2_x86_geode is not set
# BR2_x86_c3 is not set
# BR2_x86_winchip_c6 is not set
# BR2_x86_winchip2 is not set
BR2_ARCH="i686"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="i686"
BR2_GCC_TARGET_ARCH="i686"

#
# Target options
#

#
# Project Options
#
BR2_PROJECT="uclibc"
BR2_HOSTNAME="uclibc"
BR2_BANNER="Welcome to Buildroot"

#
# Preset Devices
#
# BR2_TARGET_AMD is not set
# BR2_TARGET_X86 is not set

#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set

#
# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
# BR2_TARGET_GENERIC_GETTY is not set

#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(BASE_DIR)/dl"
BR2_COPYTO=""

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="easynews"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"

#
# Atmel Mirrors
#
BR2_ATMEL_MIRROR="ftp://www.at91.com/pub/buildroot/"
BR2_AT91_PATCH_MIRROR="http://maxim.org.za/AT91RM9200/2.6/"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
# BR2_FPU_SUFFIX is not set
BR2_TOPDIR_PREFIX=""
BR2_TOPDIR_SUFFIX=""
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibc"
BR2_JLEVEL=1
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
BR2_RECENT=y
# BR2_CONFIG_CACHE is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_UPDATE_CONFIG=y

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
BR2_TOOLCHAIN_SOURCE=y
BR2_EXT_GCC_VERSION_4_1_2=y
BR2_EXT_GCC_VERSION_4_2_1=y
BR2_EXT_GCC_VERSION_4_2_2=y
BR2_EXT_GCC_VERSION_4_2_3=y
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_BINUTILS_VERSION_2_18=y
BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
BR2_EXT_UCLIBC_VERSION_0_9_30=y
BR2_EXT_UCLIBC_VERSION_0_9_30_1=y

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_23 is not set
# BR2_KERNEL_HEADERS_2_6_24 is not set
# BR2_KERNEL_HEADERS_2_6_25 is not set
# BR2_KERNEL_HEADERS_2_6_26 is not set
# BR2_KERNEL_HEADERS_2_6_27 is not set
# BR2_KERNEL_HEADERS_2_6_28 is not set
BR2_KERNEL_HEADERS_2_6_29=y
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.29.2"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_UCLIBC_VERSION_0_9_29 is not set
# BR2_UCLIBC_VERSION_0_9_30 is not set
BR2_UCLIBC_VERSION_0_9_30_1=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.30.1"
BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.30.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_PROGRAM_INVOCATION is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
# BR2_BINUTILS_VERSION_2_18 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
# BR2_BINUTILS_VERSION_2_19 is not set
BR2_BINUTILS_VERSION_2_19_1=y
BR2_BINUTILS_VERSION="2.19.1"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_3_4_6 is not set
# BR2_GCC_VERSION_4_0_4 is not set
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_2 is not set
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_1 is not set
# BR2_GCC_VERSION_4_3_2 is not set
BR2_GCC_VERSION_4_3_3=y
# BR2_GCC_VERSION_4_4_X is not set
BR2_GCC_SUPPORTS_SYSROOT=y
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.3"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_LIBGCJ is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y

#
# Ccache Options
#
# BR2_CCACHE is not set

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set

#
# Common Toolchain Options
#
BR2_LARGEFILE=y
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
BR2_ENABLE_LOCALE=y
# BR2_ENABLE_LOCALE_PREGENERATED is not set
BR2_ENABLE_LOCALE_PURGE=y
BR2_ENABLE_LOCALE_WHITELIST="C en_US de"
BR2_USE_WCHAR=y
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
BR2_GCC_CROSS_CXX=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TARGET_OPTIMIZATION="-Os -pipe"
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
# BR2_ENABLE_MULTILIB is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_12_X is not set
# BR2_BUSYBOX_VERSION_1_13_X is not set
BR2_BUSYBOX_VERSION_1_14_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.14.0"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
BR2_PACKAGE_BUSYBOX_HIDE_OTHERS=y
# BR2_PACKAGE_BUSYBOX_SKELETON is not set

#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_MAKE is not set

#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PCRE is not set

#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBOIL is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set

#
# Database
#
# BR2_PACKAGE_MYSQL_CLIENT is not set
# BR2_PACKAGE_SQLITE is not set

#
# Networking
#

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BIND is not set
# BR2_PACKAGE_BRIDGE is not set
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set
# BR2_PACKAGE_IPERF is not set

#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MDNSRESPONDER is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
# BR2_PACKAGE_NEON is not set

#
# netkitbase requires a toolchain with RPC support
#
# BR2_PACKAGE_NETKITTELNET is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set

#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
# BR2_PACKAGE_OPENSSH is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set

#
# quagga suite
#
# BR2_PACKAGE_QUAGGA_ZEBRA is not set
# BR2_PACKAGE_QUAGGA_BGPD is not set
# BR2_PACKAGE_QUAGGA_RIPD is not set
# BR2_PACKAGE_QUAGGA_RIPNGD is not set
# BR2_PACKAGE_QUAGGA_OSPFD is not set
# BR2_PACKAGE_QUAGGA_WATCHQUAGGA is not set
# BR2_PACKAGE_QUAGGA_ISISD is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TFTPD is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set

#
# Hardware handling / blockdevices and filesystem maintenance
#
# BR2_PACKAGE_ACPID is not set
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DEVMEM2 is not set
# BR2_PACKAGE_DM is not set
# BR2_PACKAGE_DMRAID is not set
# BR2_PACKAGE_E2FSPROGS is not set
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MKDOSFS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# asterisk	- disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_FESTIVAL is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_VLC is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# text rendering libraries
#
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set

#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
BR2_PACKAGE_JPEG=y
# BR2_PACKAGE_LIBART is not set
BR2_PACKAGE_LIBPNG=y
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_SDL is not set
BR2_PACKAGE_TIFF=y

#
# busybox graphic applications
#

#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set

#
# other GUIs
#
BR2_PACKAGE_QTOPIA4=y
# BR2_PACKAGE_QTOPIA4_DEBUG is not set
BR2_PACKAGE_QTOPIA4_SHARED=y
# BR2_PACKAGE_QTOPIA4_STATIC is not set
# BR2_PACKAGE_QTOPIA4_LICENSE_TYPE_COMMERCIAL is not set
BR2_PACKAGE_QTOPIA4_LICENSE_APPROVED=y
# BR2_PACKAGE_QTOPIA4_QT3SUPPORT is not set
BR2_PACKAGE_QTOPIA4_GUI_MODULE=y

#
# Pixel depths
#

#
# Deselecting each option leads to Qt's default (8,16,32)
#
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_ALL is not set
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_1 is not set
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_4 is not set
BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_8=y
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_12 is not set
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_15 is not set
BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_16=y
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_18 is not set
BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_24=y
# BR2_PACKAGE_QTOPIA4_PIXEL_DEPTH_32 is not set
# BR2_PACKAGE_QTOPIA4_GIF is not set
# BR2_PACKAGE_QTOPIA4_LIBMNG is not set
# BR2_PACKAGE_QTOPIA4_NOJPEG is not set
BR2_PACKAGE_QTOPIA4_SYSTEMJPEG=y
# BR2_PACKAGE_QTOPIA4_QTJPEG is not set
# BR2_PACKAGE_QTOPIA4_NOPNG is not set
BR2_PACKAGE_QTOPIA4_SYSTEMPNG=y
# BR2_PACKAGE_QTOPIA4_QTPNG is not set
# BR2_PACKAGE_QTOPIA4_NOTIFF is not set
BR2_PACKAGE_QTOPIA4_SYSTEMTIFF=y
# BR2_PACKAGE_QTOPIA4_QTTIFF is not set
BR2_PACKAGE_QTOPIA4_QTZLIB=y
# BR2_PACKAGE_QTOPIA4_SYSTEMZLIB is not set
# BR2_PACKAGE_QTOPIA4_NOFREETYPE is not set
# BR2_PACKAGE_QTOPIA4_QTFREETYPE is not set
BR2_PACKAGE_QTOPIA4_SYSTEMFREETYPE=y
BR2_PACKAGE_QTOPIA4_EMB_PLATFORM="x86"
# BR2_PACKAGE_QTOPIA4_SQL_MODULE is not set

#
# Graphics drivers
#
BR2_PACKAGE_QTOPIA4_GFX_LINUXFB=y
# BR2_PACKAGE_QTOPIA4_GFX_TRANSFORMED is not set
# BR2_PACKAGE_QTOPIA4_GFX_QVFB is not set
# BR2_PACKAGE_QTOPIA4_GFX_VNC is not set
# BR2_PACKAGE_QTOPIA4_GFX_MULTISCREEN is not set

#
# Mouse drivers
#
# BR2_PACKAGE_QTOPIA4_MOUSE_PC is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_BUS is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_LINUXTP is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_YOPY is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_VR41XX is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_TSLIB is not set
# BR2_PACKAGE_QTOPIA4_MOUSE_QVFB is not set
# BR2_PACKAGE_QTOPIA4_PHONON is not set
BR2_PACKAGE_QTOPIA4_XML=y
# BR2_PACKAGE_QTOPIA4_XMLPATTERNS is not set
# BR2_PACKAGE_QTOPIA4_SVG is not set
BR2_PACKAGE_QTOPIA4_NETWORK=y
# BR2_PACKAGE_QTOPIA4_WEBKIT is not set
# BR2_PACKAGE_QTOPIA4_OPENSSL is not set
BR2_PACKAGE_QTOPIA4_SCRIPT=y
# BR2_PACKAGE_QTOPIA4_SCRIPTTOOLS is not set
BR2_PACKAGE_XSERVER_none=y
# BR2_PACKAGE_XSERVER_xorg is not set
# BR2_PACKAGE_XSERVER_tinyx is not set

#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
BR2_PACKAGE_FREETYPE=y
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_WEBKIT is not set

#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set

#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set

#
# dillo		- disabled (requires jpeg,libglib12,libgtk12,zlib,libpng and Xorg(7))
#
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_GOB2 is not set
# BR2_PACKAGE_LEAFPAD is not set

#
# midori		- disabled (requires Xorg(7))
#
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set
# BR2_PACKAGE_XVKBD is not set

#
# Compressors / decompressors
#
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_LZMA_TARGET is not set
# BR2_PACKAGE_LZMA_HOST is not set
BR2_PACKAGE_ZLIB=y
# BR2_PACKAGE_ZLIB_TARGET_HEADERS is not set

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_PORTAGE is not set

#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set

#
# XML handling
#
BR2_PACKAGE_EXPAT=y
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_XERCES is not set

#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_VICE is not set
# BR2_PACKAGE_XBOARD is not set

#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="rootfs"
BR2_ROOTFS_SUFFIX=""

#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
BR2_TARGET_ROOTFS_EXT2_COPYTO=""
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_ISO9660 is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# bootloader for target device
#
# BR2_TARGET_GRUB is not set
# BR2_TARGET_SYSLINUX is not set
# BR2_TARGET_PXELINUX is not set
# BR2_TARGET_UBOOT is not set

#
# Kernel
#
BR2_KERNEL_none=y
# BR2_KERNEL_LINUX_ADVANCED is not set
# BR2_KERNEL_LINUX is not set
# BR2_KERNEL_HURD is not set

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-06 15:17 ` Peter Korsgaard
  2009-05-06 16:09   ` Steffen Schulz
@ 2009-05-07  8:29   ` Steffen Schulz
  2009-05-08 10:13     ` Steffen Schulz
  1 sibling, 1 reply; 9+ messages in thread
From: Steffen Schulz @ 2009-05-07  8:29 UTC (permalink / raw)
  To: buildroot



Second attempt, seems my attachments were too big..


On 090506 at 17:30, Peter Korsgaard wrote:
> >>>>> "Steffen" == Steffen Schulz <pepe_ml@gmx.net> writes:
>  Steffen> is there any buildroot configuration that gives me a working
>  Steffen> X11 using the framebuffer?
> 
>  Steffen> I saw updates in the X11 area again for the current rc1, but
>  Steffen> I still fail to compile anything using X11.
> 
> Strange, it works here ..

That is good to hear. Care to send a sample .config?

>  Steffen> Currently, if I select tinyX and xserver, xfont-encodings
>  Steffen> will complain about missing mkfontscale. If I add that to
>  Steffen> the dependencies, it still complains since the binary is not
>  Steffen> copied to staging. Even then it seems some shared libraries
>  Steffen> are missing that ldd fails to tell me about.
> Hmm, maybe it needs it at build time, E.G. present on the host. Do you
> have it installed on your host? Send your .config and I'll give it a
> try, we should probably build it for the host as well.
 
I have mkfontscale on the host. And when I copy it from the build
directory to staging, it is used by xfont_encodings. But libs are
missing. I tried and failed so often with previous svn versions
that I did not investigate further.

My .config is very simple since I just wanted to see if the build is
getting somewhere. For X11, I activated TinyX and then xorg-server.
This pulls in several libraries and needs i18n, WCHAR etc.

The qtopia error is also at compile time. It might just work if I
enable that funny switch, but since it is not enabled it seems this is
not a common problem either.

I essentially need a minimal X using fbdev so that I can try to port
some apps(virt-manager and a ton of dependencies)..


/steffen
-- 
pepe at unixfan.net                            gpg --recv-key A04D7875
Key fingerprint: B805 57BE E4AF 0104 CC51  77A1 CE6F 8D46 A04D 7875
-------------- next part --------------
A non-text attachment was scrubbed...
Name: br_config_x11.gz
Type: application/octet-stream
Size: 5840 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090507/d075cf21/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: br_config_qtopia.gz
Type: application/octet-stream
Size: 4749 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090507/d075cf21/attachment-0001.obj>

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-07  8:29   ` Steffen Schulz
@ 2009-05-08 10:13     ` Steffen Schulz
  2009-05-08 10:37       ` Peter Korsgaard
  0 siblings, 1 reply; 9+ messages in thread
From: Steffen Schulz @ 2009-05-08 10:13 UTC (permalink / raw)
  To: buildroot


Okay, I did another attempt to compile xorg and selected a few more X
packages. Now it tries to build Mesa before getting to the missing
makedepend I had before. Interestingly, the problem seems to be the
similar.

When I manually add xutil_makedepend to the mesa dependencies and then
copy the makedepend binary to staging/usr/bin/, the next build attempt
yields:

/bin/sh: /home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/usr/bin/makedepend:
No such file or directory


./i686-linux-ldd makedepend
checking sub-depends for '/lib/libgcc_s.so.1'
checking sub-depends for 'not found'
checking sub-depends for '/lib/libc.so.6'
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00000000)
        libc.so.0 => not found (0x00000000)
        libc.so.6 => /lib/libc.so.6 (0x00000000)
        /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x00000000)


find staging_dir -name libgcc\*
staging_dir/usr/lib/gcc/i686-linux-uclibc/4.3.3/libgcc_eh.a
staging_dir/usr/lib/gcc/i686-linux-uclibc/4.3.3/libgcc.a
staging_dir/usr/i686-linux-uclibc/lib/libgcc_s.so.1
staging_dir/usr/i686-linux-uclibc/lib/libgcc_s.so


When I copy libgcc* to staging/lib/, ldd still reports the same
problem.


So I removed makedepend and install it on the host instead. Now mesa
fails with 

[...]  -DIN_DRI_DRIVER -DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING
-DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN -DUSE_X86_ASM -DUSE_MMX_ASM
-DUSE_3DNOW_ASM -DUSE_SSE_ASM -fno-strict-aliasing gen_matypes.c -o gen_matypes
./gen_matypes > matypes.h
/bin/sh: ./gen_matypes: No such file or directory

Note that ./gen_matypes is local. It fails again because of missing
libgcc. Even though staging/lib/libgcc_s.so.1 still exists from before.


What am I missing here?

thanks,
/steffen

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-08 10:13     ` Steffen Schulz
@ 2009-05-08 10:37       ` Peter Korsgaard
  2009-05-08 12:07         ` Steffen Schulz
  0 siblings, 1 reply; 9+ messages in thread
From: Peter Korsgaard @ 2009-05-08 10:37 UTC (permalink / raw)
  To: buildroot

>>>>> "Steffen" == Steffen Schulz <pepe_ml@gmx.net> writes:

 Steffen> Okay, I did another attempt to compile xorg and selected a few more X
 Steffen> packages. Now it tries to build Mesa before getting to the missing
 Steffen> makedepend I had before. Interestingly, the problem seems to be the
 Steffen> similar.

 Steffen> When I manually add xutil_makedepend to the mesa dependencies and then
 Steffen> copy the makedepend binary to staging/usr/bin/, the next build attempt
 Steffen> yields:

 Steffen> /bin/sh: /home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/usr/bin/makedepend:
 Steffen> No such file or directory

So mesa needs makedepend on the host. Running the one for the target
won't help. Do you have makedepend installed on your host?

 Steffen> So I removed makedepend and install it on the host instead. Now mesa
 Steffen> fails with 

 Steffen> [...]  -DIN_DRI_DRIVER -DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING
 Steffen> -DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN -DUSE_X86_ASM -DUSE_MMX_ASM
 Steffen> -DUSE_3DNOW_ASM -DUSE_SSE_ASM -fno-strict-aliasing gen_matypes.c -o gen_matypes
 Steffen> ./gen_matypes > matypes.h
 Steffen> /bin/sh: ./gen_matypes: No such file or directory

You didn't paste enough for us to see if gen_matypes gets compiled for
the host or the target, but from the error message it looks like it's
for the target (which is wrong).

I'm pretty sure I compiled mesa3d for arm not that long ago, so it
seems to be an x86 specific issue.

I'll take a look at it this weekend.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-08 10:37       ` Peter Korsgaard
@ 2009-05-08 12:07         ` Steffen Schulz
  2009-05-08 12:36           ` Peter Korsgaard
  0 siblings, 1 reply; 9+ messages in thread
From: Steffen Schulz @ 2009-05-08 12:07 UTC (permalink / raw)
  To: buildroot

On 090508 at 12:45, Peter Korsgaard wrote:
>  Steffen> When I manually add xutil_makedepend to the mesa dependencies and then
>  Steffen> copy the makedepend binary to staging/usr/bin/, the next build attempt
>  Steffen> yields:
> 
>  Steffen> /bin/sh: /home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/usr/bin/makedepend:
>  Steffen> No such file or directory
> 
> So mesa needs makedepend on the host. Running the one for the target
> won't help. Do you have makedepend installed on your host?


I installed makedepend on the host after this step, which then led to
the gen_matypes problem.


>  Steffen> [...]  -DIN_DRI_DRIVER -DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING
>  Steffen> -DHAVE_ALIAS -DHAVE_POSIX_MEMALIGN -DUSE_X86_ASM -DUSE_MMX_ASM
>  Steffen> -DUSE_3DNOW_ASM -DUSE_SSE_ASM -fno-strict-aliasing gen_matypes.c -o gen_matypes
>  Steffen> ./gen_matypes > matypes.h
>  Steffen> /bin/sh: ./gen_matypes: No such file or directory
> 
> You didn't paste enough for us to see if gen_matypes gets compiled for
> the host or the target, but from the error message it looks like it's
> for the target (which is wrong).
> 
> I'm pretty sure I compiled mesa3d for arm not that long ago, so it
> seems to be an x86 specific issue.
> 
> I'll take a look at it this weekend.

/home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/usr/bin/i686-linux-uclibc-gcc
-I../../../include/GL -I../../../include -I.. -I../main -I../math
-I../glapi -I../tnl -Wall -Wmissing-prototypes -std=c99 -ffast-math -Os -pipe -Os
-I/home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/usr/include
-I/home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/include
--sysroot=/home/pepe/repo/buildroot/buildroot/build_i686/staging_dir/
-isysroot /home/pepe/repo/buildroot/buildroot/build_i686/staging_dir
-mtune=i686 -march=i686 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 -fPIC -m32 -D_POSIX_SOURCE
-D_POSIX_C_SOURCE=199309L -D_SVID_SOURCE -D_BSD_SOURCE -D_GNU_SOURCE
-DPTHREADS -DUSE_EXTERNAL_DXTN_LIB=1 -DIN_DRI_DRIVER
-DGLX_DIRECT_RENDERING -DGLX_INDIRECT_RENDERING -DHAVE_ALIAS
-DHAVE_POSIX_MEMALIGN -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM
-DUSE_SSE_ASM -fno-strict-aliasing gen_matypes.c -o gen_matypes
./gen_matypes > matypes.h
/bin/sh: ./gen_matypes: No such file or directory


I guess from --sysroot and i686-linux-uclibc-gcc we can infer that it
is done for the target? I'll be happy to try to fix it myself if you
can give me an example how it is supposed to be done.

/steffen
-- 
pepe at unixfan.net                            gpg --recv-key A04D7875
Key fingerprint: B805 57BE E4AF 0104 CC51  77A1 CE6F 8D46 A04D 7875

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-08 12:07         ` Steffen Schulz
@ 2009-05-08 12:36           ` Peter Korsgaard
  2009-05-08 15:33             ` Steffen Schulz
  0 siblings, 1 reply; 9+ messages in thread
From: Peter Korsgaard @ 2009-05-08 12:36 UTC (permalink / raw)
  To: buildroot

>>>>> "Steffen" == Steffen Schulz <pepe_ml@gmx.net> writes:

Hi,

 Steffen> I guess from --sysroot and i686-linux-uclibc-gcc we can
 Steffen> infer that it is done for the target? I'll be happy to try
 Steffen> to fix it myself if you can give me an example how it is
 Steffen> supposed to be done.

Yes, it's for the target. From a quick look it seems like you should
be able to compile mesa/x86/gen_matypes.c with $(HOSTCC) before
running make, then the Makefile shouldn't try to build it with the
target compiler and will just run the host binary.

-- 
Bye, Peter Korsgaard

^ permalink raw reply	[flat|nested] 9+ messages in thread

* [Buildroot] X11 and buildroot..
  2009-05-08 12:36           ` Peter Korsgaard
@ 2009-05-08 15:33             ` Steffen Schulz
  0 siblings, 0 replies; 9+ messages in thread
From: Steffen Schulz @ 2009-05-08 15:33 UTC (permalink / raw)
  To: buildroot

On 090508 at 14:45, Peter Korsgaard wrote:
>  Steffen> I guess from --sysroot and i686-linux-uclibc-gcc we can
>  Steffen> infer that it is done for the target? I'll be happy to try
>  Steffen> to fix it myself if you can give me an example how it is
>  Steffen> supposed to be done.
> 
> Yes, it's for the target. From a quick look it seems like you should
> be able to compile mesa/x86/gen_matypes.c with $(HOSTCC) before
> running make, then the Makefile shouldn't try to build it with the
> target compiler and will just run the host binary.

Modifying the respective Makefile to use HOSTCC and removing CFLAGS
(because of --sysroot) fixes the issue. I also just saw Bug 323
https://bugs.busybox.net/show_bug.cgi?id=323

It uses different variables but I can confirm that it works, too.

Note that Mesa also needs a g++ in the target(see attached patch).
We have no way of defining dependencies like the missing mkfontscale on
the host, right? Should probably be added..

Thanks for the prompt help, I'll speak up if I find more issues.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: mesaCppDependency.patch
Type: text/x-diff
Size: 520 bytes
Desc: not available
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20090508/3b68bb76/attachment.bin>

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2009-05-08 15:33 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-06 12:42 [Buildroot] X11 and buildroot Steffen Schulz
2009-05-06 15:17 ` Peter Korsgaard
2009-05-06 16:09   ` Steffen Schulz
2009-05-07  8:29   ` Steffen Schulz
2009-05-08 10:13     ` Steffen Schulz
2009-05-08 10:37       ` Peter Korsgaard
2009-05-08 12:07         ` Steffen Schulz
2009-05-08 12:36           ` Peter Korsgaard
2009-05-08 15:33             ` Steffen Schulz

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox