* [Buildroot] Add SDL_mixer to buildroot/package
@ 2008-02-16 4:56 Hebbar
2008-03-07 13:26 ` Peter Korsgaard
0 siblings, 1 reply; 5+ messages in thread
From: Hebbar @ 2008-02-16 4:56 UTC (permalink / raw)
To: buildroot
Hi,
Below is a patch to add sdl_mixer package to buildroot. I have tested it for
arm926ejs toolchain with buildroot 4th feb Snapshot.
Kindly add it to buildroot trunk.
Regards
Gururaja
add SDL_Mixer package
Added:
buildroot/package/sdl_mixer/
buildroot/package/sdl_mixer/Config.in
buildroot/package/sdl_mixer/sdl_mixer.mk
buildroot/package/sdl_mixer/sdl_mixer-1.2.8_sdl_header.patch
Modified:
buildroot/package/Config.in
http://www.nabble.com/file/p15514999/package_config_in.patch
package_config_in.patch
http://www.nabble.com/file/p15514999/sdl_mixer-1.2.8_sdl_header.patch
sdl_mixer-1.2.8_sdl_header.patch
http://www.nabble.com/file/p15514999/sdl_mixer.patch sdl_mixer.patch
--
View this message in context: http://www.nabble.com/Add-SDL_mixer-to-buildroot-package-tp15514999p15514999.html
Sent from the BuildRoot mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] Add SDL_mixer to buildroot/package
2008-02-16 4:56 [Buildroot] Add SDL_mixer to buildroot/package Hebbar
@ 2008-03-07 13:26 ` Peter Korsgaard
2008-03-10 6:57 ` Gururaja Hebbar K R
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Peter Korsgaard @ 2008-03-07 13:26 UTC (permalink / raw)
To: buildroot
>>>>> "Hebbar" == Hebbar <gururajakr@sanyo.co.in> writes:
Hi,
Hebbar> Below is a patch to add sdl_mixer package to buildroot. I
Hebbar> have tested it for arm926ejs toolchain with buildroot 4th feb
Hebbar> Snapshot.
Hebbar> Kindly add it to buildroot trunk.
I've committed a cleaned up version - Thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] Add SDL_mixer to buildroot/package
2008-03-07 13:26 ` Peter Korsgaard
@ 2008-03-10 6:57 ` Gururaja Hebbar K R
2008-03-10 7:04 ` Gururaja Hebbar K R
2008-03-14 2:47 ` Gururaja Hebbar K R
2 siblings, 0 replies; 5+ messages in thread
From: Gururaja Hebbar K R @ 2008-03-10 6:57 UTC (permalink / raw)
To: buildroot
Dear Peter Korsgaard,
Thanks for adding the sdl_mixer.
I would like to submit sdl_image & sdl_net package for the buildroot.
below is the patch to add sdl_image.
sdl_net patch will follow.
Thanks in advance
Regards
Gururaja
buildroot: SDL_image package
Added:
trunk/buildroot/package/sdl_image/
trunk/buildroot/package/sdl_image/Config.in
trunk/buildroot/package/sdl_image/sdl_image.mk
Modified:
trunk/buildroot/package/Config.in
diff -purN buildroot/package/Config.in
buildroot_patched/package/Config.in
--- buildroot/package/Config.in 2008-03-04 03:15:13.000000000 -0500
+++ buildroot_patched/package/Config.in 2008-03-04 17:01:35.000000000
-0500
@@ -316,6 +312,10 @@ source "package/jpeg/Config.in"
+ source "package/libpng/Config.in"
+ source "package/libungif/Config.in"
+ source "package/sdl/Config.in"
++source "package/sdl_image/Config.in"
+ source "package/sdl_ttf/Config.in"
+ source "package/tiff/Config.in"
+
diff -purN buildroot/package/sdl_image/Config.in
buildroot_patched/package/sdl_image/Config.in
--- buildroot/package/sdl_image/Config.in 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/Config.in 2008-02-22
21:17:28.000000000 -0500
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SDL_IMAGE
+ bool "SDL_image"
+ default n
+ depends on BR2_PACKAGE_SDL
+ help
+ SDL_image is an image file loading library.
+ It loads images as SDL surfaces, and supports the following
+ formats: BMP, GIF, JPEG, LBM, PCX, PNG, PNM, TGA, TIFF, XCF,
XPM, XV.
+
+ http://www.libsdl.org/projects/SDL_image/
diff -purN buildroot/package/sdl_image/sdl_image.mk
buildroot_patched/package/sdl_image/sdl_image.mk
--- buildroot/package/sdl_image/sdl_image.mk 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/sdl_image.mk 2008-03-04
15:04:24.000000000 -0500
@@ -0,0 +1,86 @@
+#############################################################
+#
+# SDL_image
+#
+#############################################################
+SDL_IMAGE_VERSION:=1.2.6
+SDL_IMAGE_SOURCE:=SDL_image-$(SDL_IMAGE_VERSION).tar.gz
+SDL_IMAGE_SITE:=http://www.libsdl.org/projects/SDL_image/release
+SDL_IMAGE_CAT:=$(ZCAT)
+SDL_IMAGE_DIR:=$(BUILD_DIR)/SDL_image-$(SDL_IMAGE_VERSION)
+
+$(DL_DIR)/$(SDL_IMAGE_SOURCE):
+ $(WGET) -P $(DL_DIR) $(SDL_IMAGE_SITE)/$(SDL_IMAGE_SOURCE)
+
+sdl_image-source: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+
+$(SDL_IMAGE_DIR)/.unpacked: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+ $(SDL_IMAGE_CAT) $(DL_DIR)/$(SDL_IMAGE_SOURCE) | tar -C
$(BUILD_DIR) $(TAR_OPTIONS) -
+ $(CONFIG_UPDATE) $(SDL_IMAGE_DIR)
+ touch $@
+
+$(SDL_IMAGE_DIR)/.configured: $(SDL_IMAGE_DIR)/.unpacked
$(STAGING_DIR)/usr/lib/libSDL.so
+ (cd $(SDL_IMAGE_DIR); rm -rf config.cache; \
+ $(TARGET_CONFIGURE_OPTS) \
+ $(TARGET_CONFIGURE_ARGS) \
+ ./configure \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --build=$(GNU_HOST_NAME) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --without-x \
+ --with-freetype-prefix=$(STAGING_DIR)/usr \
+ --with-sdl-prefix=$(STAGING_DIR)/usr \
+ )
+ touch $@
+
+$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
+ $(MAKE1) $(TARGET_CONFIGURE_OPTS) -C $(SDL_IMAGE_DIR)
+ touch $@
+
+$(STAGING_DIR)/usr/lib/libSDL_image.so: $(SDL_IMAGE_DIR)/.compiled
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) install
+ touch -c $@
+
+$(TARGET_DIR)/usr/lib/libSDL_image.so:
$(STAGING_DIR)/usr/lib/libSDL_image.so
+ cp -dpf $(STAGING_DIR)/usr/lib/libSDL_image*.so*
$(TARGET_DIR)/usr/lib/
+ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED)
$(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image: uclibc $(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image-clean:
+ rm -f $(TARGET_DIR)/usr/lib/libSDL_image*.so*
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) uninstall
+ -$(MAKE) -C $(SDL_IMAGE_DIR) clean
+
+sdl_image-dirclean:
+ rm -rf $(SDL_IMAGE_DIR)
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(strip $(BR2_PACKAGE_SDL_IMAGE)),y)
+TARGETS+=sdl_image
+endif
-----Original Message-----
From: Peter Korsgaard [mailto:jacmet at gmail.com] On Behalf Of Peter
Korsgaard
Sent: Friday, March 07, 2008 5:26 AM
To: Gururaja Hebbar K R
Cc: buildroot at uclibc.org
Subject: Re: [Buildroot] Add SDL_mixer to buildroot/package
>>>>> "Hebbar" == Hebbar <gururajakr@sanyo.co.in> writes:
Hi,
Hebbar> Below is a patch to add sdl_mixer package to buildroot. I
Hebbar> have tested it for arm926ejs toolchain with buildroot 4th feb
Hebbar> Snapshot.
Hebbar> Kindly add it to buildroot trunk.
I've committed a cleaned up version - Thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] Add SDL_mixer to buildroot/package
2008-03-07 13:26 ` Peter Korsgaard
2008-03-10 6:57 ` Gururaja Hebbar K R
@ 2008-03-10 7:04 ` Gururaja Hebbar K R
2008-03-14 2:47 ` Gururaja Hebbar K R
2 siblings, 0 replies; 5+ messages in thread
From: Gururaja Hebbar K R @ 2008-03-10 7:04 UTC (permalink / raw)
To: buildroot
Sorry for the corrupt patch.
here is the correct one.
diff -purN buildroot/package/Config.in
buildroot_patched/package/Config.in
--- buildroot/package/Config.in 2008-03-04 03:15:13.000000000 -0500
+++ buildroot_patched/package/Config.in 2008-03-04 17:01:35.000000000
-0500
@@ -316,6 +312,10 @@ source "package/jpeg/Config.in"
source "package/libpng/Config.in"
source "package/libungif/Config.in"
source "package/sdl/Config.in"
+source "package/sdl_image/Config.in"
source "package/sdl_ttf/Config.in"
source "package/tiff/Config.in"
diff -purN buildroot/package/sdl_image/Config.in
buildroot_patched/package/sdl_image/Config.in
--- buildroot/package/sdl_image/Config.in 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/Config.in 2008-02-22
21:17:28.000000000 -0500
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SDL_IMAGE
+ bool "SDL_image"
+ default n
+ depends on BR2_PACKAGE_SDL
+ help
+ SDL_image is an image file loading library.
+ It loads images as SDL surfaces, and supports the following
+ formats: BMP, GIF, JPEG, LBM, PCX, PNG, PNM, TGA, TIFF, XCF,
XPM, XV.
+
+ http://www.libsdl.org/projects/SDL_image/
diff -purN buildroot/package/sdl_image/sdl_image.mk
buildroot_patched/package/sdl_image/sdl_image.mk
--- buildroot/package/sdl_image/sdl_image.mk 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/sdl_image.mk 2008-03-04
15:04:24.000000000 -0500
@@ -0,0 +1,69 @@
+#############################################################
+#
+# SDL_image
+#
+#############################################################
+SDL_IMAGE_VERSION:=1.2.6
+SDL_IMAGE_SOURCE:=SDL_image-$(SDL_IMAGE_VERSION).tar.gz
+SDL_IMAGE_SITE:=http://www.libsdl.org/projects/SDL_image/release
+SDL_IMAGE_CAT:=$(ZCAT)
+SDL_IMAGE_DIR:=$(BUILD_DIR)/SDL_image-$(SDL_IMAGE_VERSION)
+
+$(DL_DIR)/$(SDL_IMAGE_SOURCE):
+ $(WGET) -P $(DL_DIR) $(SDL_IMAGE_SITE)/$(SDL_IMAGE_SOURCE)
+
+sdl_image-source: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+
+$(SDL_IMAGE_DIR)/.unpacked: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+ $(SDL_IMAGE_CAT) $(DL_DIR)/$(SDL_IMAGE_SOURCE) | tar -C
$(BUILD_DIR) $(TAR_OPTIONS) -
+ $(CONFIG_UPDATE) $(SDL_IMAGE_DIR)
+ touch $@
+
+$(SDL_IMAGE_DIR)/.configured: $(SDL_IMAGE_DIR)/.unpacked
$(STAGING_DIR)/usr/lib/libSDL.so
+ (cd $(SDL_IMAGE_DIR); rm -rf config.cache; \
+ $(TARGET_CONFIGURE_OPTS) \
+ $(TARGET_CONFIGURE_ARGS) \
+ ./configure \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --build=$(GNU_HOST_NAME) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --without-x \
+ --with-freetype-prefix=$(STAGING_DIR)/usr \
+ --with-sdl-prefix=$(STAGING_DIR)/usr \
+ )
+ touch $@
+
+$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
+ $(MAKE1) $(TARGET_CONFIGURE_OPTS) -C $(SDL_IMAGE_DIR)
+ touch $@
+
+$(STAGING_DIR)/usr/lib/libSDL_image.so: $(SDL_IMAGE_DIR)/.compiled
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) install
+ touch -c $@
+
+$(TARGET_DIR)/usr/lib/libSDL_image.so:
$(STAGING_DIR)/usr/lib/libSDL_image.so
+ cp -dpf $(STAGING_DIR)/usr/lib/libSDL_image*.so*
$(TARGET_DIR)/usr/lib/
+ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED)
$(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image: uclibc $(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image-clean:
+ rm -f $(TARGET_DIR)/usr/lib/libSDL_image*.so*
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) uninstall
+ -$(MAKE) -C $(SDL_IMAGE_DIR) clean
+
+sdl_image-dirclean:
+ rm -rf $(SDL_IMAGE_DIR)
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(strip $(BR2_PACKAGE_SDL_IMAGE)),y)
+TARGETS+=sdl_image
+endif
+
-----Original Message-----
From: Gururaja Hebbar K R
Sent: Monday, March 10, 2008 3:35 PM
To: 'Peter Korsgaard'
Cc: buildroot at uclibc.org
Subject: RE: [Buildroot] Add SDL_mixer to buildroot/package
Dear Peter Korsgaard,
Thanks for adding the sdl_mixer.
I would like to submit sdl_image & sdl_net package for the buildroot.
below is the patch to add sdl_image.
sdl_net patch will follow.
Thanks in advance
Regards
Gururaja
buildroot: SDL_image package
Added:
trunk/buildroot/package/sdl_image/
trunk/buildroot/package/sdl_image/Config.in
trunk/buildroot/package/sdl_image/sdl_image.mk
Modified:
trunk/buildroot/package/Config.in
diff -purN buildroot/package/Config.in
buildroot_patched/package/Config.in
--- buildroot/package/Config.in 2008-03-04 03:15:13.000000000 -0500
+++ buildroot_patched/package/Config.in 2008-03-04 17:01:35.000000000
-0500
@@ -316,6 +312,10 @@ source "package/jpeg/Config.in"
+ source "package/libpng/Config.in"
+ source "package/libungif/Config.in"
+ source "package/sdl/Config.in"
++source "package/sdl_image/Config.in"
+ source "package/sdl_ttf/Config.in"
+ source "package/tiff/Config.in"
+
diff -purN buildroot/package/sdl_image/Config.in
buildroot_patched/package/sdl_image/Config.in
--- buildroot/package/sdl_image/Config.in 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/Config.in 2008-02-22
21:17:28.000000000 -0500
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_SDL_IMAGE
+ bool "SDL_image"
+ default n
+ depends on BR2_PACKAGE_SDL
+ help
+ SDL_image is an image file loading library.
+ It loads images as SDL surfaces, and supports the following
+ formats: BMP, GIF, JPEG, LBM, PCX, PNG, PNM, TGA, TIFF, XCF,
XPM, XV.
+
+ http://www.libsdl.org/projects/SDL_image/
diff -purN buildroot/package/sdl_image/sdl_image.mk
buildroot_patched/package/sdl_image/sdl_image.mk
--- buildroot/package/sdl_image/sdl_image.mk 1969-12-31
19:00:00.000000000 -0500
+++ buildroot_patched/package/sdl_image/sdl_image.mk 2008-03-04
15:04:24.000000000 -0500
@@ -0,0 +1,86 @@
+#############################################################
+#
+# SDL_image
+#
+#############################################################
+SDL_IMAGE_VERSION:=1.2.6
+SDL_IMAGE_SOURCE:=SDL_image-$(SDL_IMAGE_VERSION).tar.gz
+SDL_IMAGE_SITE:=http://www.libsdl.org/projects/SDL_image/release
+SDL_IMAGE_CAT:=$(ZCAT)
+SDL_IMAGE_DIR:=$(BUILD_DIR)/SDL_image-$(SDL_IMAGE_VERSION)
+
+$(DL_DIR)/$(SDL_IMAGE_SOURCE):
+ $(WGET) -P $(DL_DIR) $(SDL_IMAGE_SITE)/$(SDL_IMAGE_SOURCE)
+
+sdl_image-source: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+
+$(SDL_IMAGE_DIR)/.unpacked: $(DL_DIR)/$(SDL_IMAGE_SOURCE)
+ $(SDL_IMAGE_CAT) $(DL_DIR)/$(SDL_IMAGE_SOURCE) | tar -C
$(BUILD_DIR) $(TAR_OPTIONS) -
+ $(CONFIG_UPDATE) $(SDL_IMAGE_DIR)
+ touch $@
+
+$(SDL_IMAGE_DIR)/.configured: $(SDL_IMAGE_DIR)/.unpacked
$(STAGING_DIR)/usr/lib/libSDL.so
+ (cd $(SDL_IMAGE_DIR); rm -rf config.cache; \
+ $(TARGET_CONFIGURE_OPTS) \
+ $(TARGET_CONFIGURE_ARGS) \
+ ./configure \
+ --target=$(GNU_TARGET_NAME) \
+ --host=$(GNU_TARGET_NAME) \
+ --build=$(GNU_HOST_NAME) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --without-x \
+ --with-freetype-prefix=$(STAGING_DIR)/usr \
+ --with-sdl-prefix=$(STAGING_DIR)/usr \
+ )
+ touch $@
+
+$(SDL_IMAGE_DIR)/.compiled: $(SDL_IMAGE_DIR)/.configured
+ $(MAKE1) $(TARGET_CONFIGURE_OPTS) -C $(SDL_IMAGE_DIR)
+ touch $@
+
+$(STAGING_DIR)/usr/lib/libSDL_image.so: $(SDL_IMAGE_DIR)/.compiled
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) install
+ touch -c $@
+
+$(TARGET_DIR)/usr/lib/libSDL_image.so:
$(STAGING_DIR)/usr/lib/libSDL_image.so
+ cp -dpf $(STAGING_DIR)/usr/lib/libSDL_image*.so*
$(TARGET_DIR)/usr/lib/
+ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED)
+$(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image: uclibc $(TARGET_DIR)/usr/lib/libSDL_image.so
+
+sdl_image-clean:
+ rm -f $(TARGET_DIR)/usr/lib/libSDL_image*.so*
+ $(MAKE) DESTDIR=$(STAGING_DIR) -C $(SDL_IMAGE_DIR) uninstall
+ -$(MAKE) -C $(SDL_IMAGE_DIR) clean
+
+sdl_image-dirclean:
+ rm -rf $(SDL_IMAGE_DIR)
+
+#############################################################
+#
+# Toplevel Makefile options
+#
+#############################################################
+ifeq ($(strip $(BR2_PACKAGE_SDL_IMAGE)),y)
+TARGETS+=sdl_image
+endif
-----Original Message-----
From: Peter Korsgaard [mailto:jacmet at gmail.com] On Behalf Of Peter
Korsgaard
Sent: Friday, March 07, 2008 5:26 AM
To: Gururaja Hebbar K R
Cc: buildroot at uclibc.org
Subject: Re: [Buildroot] Add SDL_mixer to buildroot/package
>>>>> "Hebbar" == Hebbar <gururajakr@sanyo.co.in> writes:
Hi,
Hebbar> Below is a patch to add sdl_mixer package to buildroot. I
Hebbar> have tested it for arm926ejs toolchain with buildroot 4th feb
Hebbar> Snapshot.
Hebbar> Kindly add it to buildroot trunk.
I've committed a cleaned up version - Thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] Add SDL_mixer to buildroot/package
2008-03-07 13:26 ` Peter Korsgaard
2008-03-10 6:57 ` Gururaja Hebbar K R
2008-03-10 7:04 ` Gururaja Hebbar K R
@ 2008-03-14 2:47 ` Gururaja Hebbar K R
2 siblings, 0 replies; 5+ messages in thread
From: Gururaja Hebbar K R @ 2008-03-14 2:47 UTC (permalink / raw)
To: buildroot
Hi,
Today i tried building buildroot for arm926ejs with yesterdays snapshot
for sdl & sdl mixer and what i found was that
1. make sdl will not create $(STAGING_DIR)/usr/include/SDL and will not
copy sdl header files to $(STAGING_DIR)/usr/include/SDL
2. and hence "make sdl_mixer" fails with missing sdl files
/bin/sh ./libtool --mode=compile
/opt/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi-gcc
-O0 -I/opt/buildroot/build_arm/staging_dir/usr/include
-I/opt/buildroot/build_arm/staging_dir/include
--sysroot=/opt/buildroot/build_arm/staging_dir/ -isysroot
/opt/buildroot/build_arm/staging_dir -mtune=arm9tdmi -D_GNU_SOURCE=1
-I/opt/buildroot/build_arm/staging_dir/include/SDL -D_GNU_SOURCE=1
-D_REENTRANT -DCMD_MUSIC -DWAV_MUSIC -DMOD_MUSIC -I./mikmod -DMID_MUSIC
-DUSE_TIMIDITY_MIDI -I./timidity -c ./effect_position.c -o
build/effect_position.lo
mkdir build/.libs
/opt/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi-gcc
-O0 -I/opt/buildroot/build_arm/staging_dir/usr/include
-I/opt/buildroot/build_arm/staging_dir/include
--sysroot=/opt/buildroot/build_arm/staging_dir/ -isysroot
/opt/buildroot/build_arm/staging_dir -mtune=arm9tdmi -D_GNU_SOURCE=1
-I/opt/buildroot/build_arm/staging_dir/include/SDL -D_GNU_SOURCE=1
-D_REENTRANT -DCMD_MUSIC -DWAV_MUSIC -DMOD_MUSIC -I./mikmod -DMID_MUSIC
-DUSE_TIMIDITY_MIDI -I./timidity -c ./effect_position.c -fPIC -DPIC -o
build/.libs/effect_position.o
./effect_position.c:31:17: error: SDL.h: No such file or directory
In file included from ./effect_position.c:32:
./SDL_mixer.h:28:23: error: SDL_types.h: No such file or directory
./SDL_mixer.h:29:23: error: SDL_rwops.h: No such file or directory
./SDL_mixer.h:30:23: error: SDL_audio.h: No such file or directory
./SDL_mixer.h:31:24: error: SDL_endian.h: No such file or directory
./SDL_mixer.h:32:25: error: SDL_version.h: No such file or directory
./SDL_mixer.h:33:24: error: begin_code.h: No such file or directory
In file included from ./effect_position.c:32:
./SDL_mixer.h:66: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'const'
./SDL_mixer.h:87: error: expected specifier-qualifier-list before
'Uint8'
./SDL_mixer.h:114: error: expected '=', ',', ';', 'asm' or
'__attribute__' before 'int'
I reverted back the patch you had applied on
http://www.nabble.com/svn-commit%3A-trunk-buildroot-package-sdl-ts158968
66.html and sdl builds correctly with header files copied to
$(STAGING_DIR)/usr/include/SDL.
but again sdl_mixer fails with the same error.
so i added CFLAGS to configure command as below and sdl_mixer is
building properly now,
$(SDL_MIXER_DIR)/.configured: $(SDL_MIXER_DIR)/.unpacked
$(STAGING_DIR)/usr/lib/libSDL.so
(cd $(SDL_MIXER_DIR); rm -rf config.cache; \
$(TARGET_CONFIGURE_OPTS) \
$(TARGET_CONFIGURE_ARGS) \
CFLAGS+=-I$(STAGING_DIR)/usr/include/SDL \
<--------- i added this
./configure \
--target=$(GNU_TARGET_NAME) \
--host=$(GNU_TARGET_NAME) \
<snip>
<snip>
<snip>
Kindly let me know if i need to change or add or update any files so as
to match your configs.
Regards
Gururaja
-----Original Message-----
From: Peter Korsgaard [mailto:jacmet at gmail.com] On Behalf Of Peter
Korsgaard
Sent: Friday, March 07, 2008 5:26 AM
To: Gururaja Hebbar K R
Cc: buildroot at uclibc.org
Subject: Re: [Buildroot] Add SDL_mixer to buildroot/package
>>>>> "Hebbar" == Hebbar <gururajakr@sanyo.co.in> writes:
Hi,
Hebbar> Below is a patch to add sdl_mixer package to buildroot. I
Hebbar> have tested it for arm926ejs toolchain with buildroot 4th feb
Hebbar> Snapshot.
Hebbar> Kindly add it to buildroot trunk.
I've committed a cleaned up version - Thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-03-14 2:47 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-16 4:56 [Buildroot] Add SDL_mixer to buildroot/package Hebbar
2008-03-07 13:26 ` Peter Korsgaard
2008-03-10 6:57 ` Gururaja Hebbar K R
2008-03-10 7:04 ` Gururaja Hebbar K R
2008-03-14 2:47 ` Gururaja Hebbar K R
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox