[Buildroot] [PATCH 0/3 v4] Initial support for Panda and PandaES

[Buildroot] [PATCH 0/3 v4] Initial support for Panda and PandaES

[Nicolas Dechesne]

Here is a new attempt to add support for TI PandaBoard and PandaBoard ES.

Many thanks for Arnout for his time reviewing all these versions!

v4:
 - add a config variable for SPL name since MLO is used on OMAP only
 - changed the default SPL NAME to MLO in pandaboard config
 - rebased on master branch as of 2012/03/18 

v3:
 - added more documentation in uboot/Config.in regarding SPL
 - added 'acked-by' as per review
 - rebased on master branch as of 2012/03/12

v2:

 - typo cleanup as per reviews
 - introduce BR2_TARGET_UBOOT_FORMAT_IMG to allow use of u-boot.img
   on platforms that need it, like OMAP. This is better than v1 since
   u-boot.img is not stricly dependent on SPL, so making 2 parameters
   makes more sense.

v1:

Because we want to deprecate x-loader in favor of u-boot SPL:
- my first patch adds support for SPL in BR
- SPL is enabled by default in my panda config.

Both Panda and PandaES have been tested, detection is done at run time
in uboot and kernel, so we can have 1 configuration only.

I've used DEVTMPFS by default, as 1) I generally prefer this, and 2) ttyO
was missing from the generic dev table... 


*** BLURB HERE ***

Nicolas Dechesne (3):
  uboot: Add support for U-Boot SPL
  uboot: add a new binary format for u-boot.img
  configs: add support for PandaBoard and PandaBoard ES

 boot/uboot/Config.in         |   21 +++++++++++++++++++++
 boot/uboot/uboot.mk          |    4 ++++
 configs/pandaboard_defconfig |   26 ++++++++++++++++++++++++++
 3 files changed, 51 insertions(+), 0 deletions(-)
 create mode 100644 configs/pandaboard_defconfig

-- 
1.7.9.1

[Buildroot] [PATCH 1/3 v4] uboot: Add support for U-Boot SPL

[Nicolas Dechesne]

SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
and should now be used.

This patch ensures that either SPL or xloader can be selected.

A config variable has been added for the name of the SPL binary generated
during u-boot build. For most platform it is u-boot-spl.bin but not always.
It is MLO on OMAP for example.

Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 boot/uboot/Config.in |   18 ++++++++++++++++++
 boot/uboot/uboot.mk  |    2 ++
 2 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index c8db9fb..4873e62 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -137,4 +137,22 @@ config BR2_TARGET_UBOOT_ETH1ADDR
 
 endif # BR2_TARGET_UBOOT_NETWORK
 
+config BR2_TARGET_UBOOT_SPL
+	bool "U-Boot SPL support"
+	depends on !BR2_TARGET_XLOADER
+	help
+	  Enable the U-Boot SPL support. SPL is a first stage
+	  bootloader loaded into internal memory in charge of 
+	  enabling and configuring the external memory (DDR), 
+	  and load the u-boot program into DDR.
+
+config BR2_TARGET_UBOOT_SPL_NAME
+	string "U-Boot SPL target name"
+	default "u-boot-spl.bin"
+	depends on BR2_TARGET_UBOOT_SPL
+	help
+	  This is the name of the SPL binary, generated during
+	  u-boot build. For most platform it is u-boot-spl.bin
+	  but not always. It is MLO on OMAP for example.
+
 endif # BR2_TARGET_UBOOT
diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
index db9de8d..f64964c 100644
--- a/boot/uboot/uboot.mk
+++ b/boot/uboot/uboot.mk
@@ -88,6 +88,8 @@ endef
 
 define UBOOT_INSTALL_IMAGES_CMDS
 	cp -dpf $(@D)/$(UBOOT_BIN) $(BINARIES_DIR)/
+	$(if $(BR2_TARGET_UBOOT_SPL),
+		cp -dpf $(@D)/$(BR2_TARGET_UBOOT_SPL_NAME) $(BINARIES_DIR)/)
 endef
 
 $(eval $(call GENTARGETS))
-- 
1.7.9.1

[Buildroot] [PATCH 1/3 v4] uboot: Add support for U-Boot SPL

[Frank Hunleth]

On Sun, Mar 18, 2012 at 6:04 PM, Nicolas Dechesne <n-dechesne@ti.com> wrote:
>
> SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
> and should now be used.
>
> This patch ensures that either SPL or xloader can be selected.
>
> A config variable has been added for the name of the SPL binary generated
> during u-boot build. For most platform it is u-boot-spl.bin but not
> always.
> It is MLO on OMAP for example.
>
> Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

I started following the pandaboard patches, since parts are also
useful for the beaglebone. I'm not sure what their status is, but if
it helps, this particular patch is:

Tested-by: Frank Hunleth <fhunleth@troodon-software.com>

Supposing these get included, I'll need to send an updated beaglebone patch.

Frank

[Buildroot] [PATCH 1/3 v4] uboot: Add support for U-Boot SPL

[Dechesne, Nicolas]

On Sun, Apr 1, 2012 at 8:50 PM, Frank Hunleth <fhunleth@troodon-software.com
> wrote:

> I started following the pandaboard patches, since parts are also
> useful for the beaglebone. I'm not sure what their status is, but if
> it helps, this particular patch is:
>
> Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
>
> Supposing these get included, I'll need to send an updated beaglebone
> patch.
>


ping.

any interest to merge these pandaboard support patches?

let me know if you need anything from me.

thx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120503/41c85375/attachment.html>

[Buildroot] [PATCH 1/3 v4] uboot: Add support for U-Boot SPL

[Gustavo Zacarias]

On 2012-03-18 19:04, Nicolas Dechesne wrote:


> Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

[Buildroot] [PATCH 1/3 v4] uboot: Add support for U-Boot SPL

[Peter Korsgaard]

>>>>> "Nicolas" == Nicolas Dechesne <n-dechesne@ti.com> writes:

 Nicolas> SPL is a first stage bootloader. On pandaboard it supercedes x-loader,
 Nicolas> and should now be used.

 Nicolas> This patch ensures that either SPL or xloader can be selected.

 Nicolas> A config variable has been added for the name of the SPL
 Nicolas> binary generated during u-boot build. For most platform it is
 Nicolas> u-boot-spl.bin but not always.  It is MLO on OMAP for example.

Committed, thanks - And sorry for the slow response.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 2/3 v4] uboot: add a new binary format for u-boot.img

[Nicolas Dechesne]

For some platforms like OMAP, a new binary format is now being used
for u-boot: u-boot.img. It is basically u-boot.bin which has been
processed with mkimage.

Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
 boot/uboot/Config.in |    3 +++
 boot/uboot/uboot.mk  |    2 ++
 2 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index 4873e62..d5669e1 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -79,6 +79,9 @@ choice
 config BR2_TARGET_UBOOT_FORMAT_BIN
 	bool "u-boot.bin"
 
+config BR2_TARGET_UBOOT_FORMAT_IMG
+	bool "u-boot.img"
+
 config BR2_TARGET_UBOOT_FORMAT_NAND_BIN
 	bool "u-boot-nand.bin"
 
diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
index f64964c..3119092 100644
--- a/boot/uboot/uboot.mk
+++ b/boot/uboot/uboot.mk
@@ -29,6 +29,8 @@ else ifeq ($(BR2_TARGET_UBOOT_FORMAT_LDR),y)
 UBOOT_BIN          = u-boot.ldr
 else ifeq ($(BR2_TARGET_UBOOT_FORMAT_NAND_BIN),y)
 UBOOT_BIN          = u-boot-nand.bin
+else ifeq ($(BR2_TARGET_UBOOT_FORMAT_IMG),y)
+UBOOT_BIN          = u-boot.img
 else
 UBOOT_BIN          = u-boot.bin
 endif
-- 
1.7.9.1

[Buildroot] [PATCH 2/3 v4] uboot: add a new binary format for u-boot.img

[Gustavo Zacarias]

On 2012-03-18 19:04, Nicolas Dechesne wrote:

> Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
> Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

[Buildroot] [PATCH 2/3 v4] uboot: add a new binary format for u-boot.img

[Peter Korsgaard]

>>>>> "Nicolas" == Nicolas Dechesne <n-dechesne@ti.com> writes:

 Nicolas> For some platforms like OMAP, a new binary format is now being used
 Nicolas> for u-boot: u-boot.img. It is basically u-boot.bin which has been
 Nicolas> processed with mkimage.

Committed, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 3/3 v4] configs: add support for PandaBoard and PandaBoard ES

[Nicolas Dechesne]

This is a default configuration for Panda and PandaES, tested on both
platforms.

DEVTMPFS is enabled, to use static dev configuration one would need
to update the generic dev table for ttyO driver.

Panda is well supported in mainline kernel with omap2plus_defconfig,
so this should be safe.

U-boot SPL support is enabled by default as x-loader is now
deprecated.

With OMAP platforms u-boot,img format is prefered now, so it's enabled
by default as well. Also, on PandaBoard, the name of SPL target file
is MLO.

Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>
---
 configs/pandaboard_defconfig |   26 ++++++++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)
 create mode 100644 configs/pandaboard_defconfig

diff --git a/configs/pandaboard_defconfig b/configs/pandaboard_defconfig
new file mode 100644
index 0000000..9496b7f
--- /dev/null
+++ b/configs/pandaboard_defconfig
@@ -0,0 +1,26 @@
+# Architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_GETTY=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyO2"
+BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
+
+# filesystem
+BR2_TARGET_ROOTFS_EXT2=y
+# BR2_TARGET_ROOTFS_TAR is not set
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
+
+# GCC
+BR2_GCC_VERSION_4_6_X=y
+
+# Bootloaders
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_BOARDNAME="omap4_panda"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="MLO"
-- 
1.7.9.1

[Buildroot] [PATCH 3/3 v4] configs: add support for PandaBoard and PandaBoard ES

[Gustavo Zacarias]

On 2012-03-18 19:04, Nicolas Dechesne wrote:

> Signed-off-by: Nicolas Dechesne <n-dechesne@ti.com>

Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

[Buildroot] [PATCH 3/3 v4] configs: add support for PandaBoard and PandaBoard ES

[Peter Korsgaard]

>>>>> "Nicolas" == Nicolas Dechesne <n-dechesne@ti.com> writes:

 Nicolas> This is a default configuration for Panda and PandaES, tested on both
 Nicolas> platforms.

 Nicolas> DEVTMPFS is enabled, to use static dev configuration one would need
 Nicolas> to update the generic dev table for ttyO driver.

 Nicolas> Panda is well supported in mainline kernel with omap2plus_defconfig,
 Nicolas> so this should be safe.

 Nicolas> U-boot SPL support is enabled by default as x-loader is now
 Nicolas> deprecated.

 Nicolas> With OMAP platforms u-boot,img format is prefered now, so it's enabled
 Nicolas> by default as well. Also, on PandaBoard, the name of SPL target file
 Nicolas> is MLO.

Committed, thanks.

-- 
Bye, Peter Korsgaard

[Buildroot] [PATCH 0/3 v4] Initial support for Panda and PandaES

[Dechesne, Nicolas]

Peter, Arnoud, Thomas,

On Sun, Mar 18, 2012 at 11:04 PM, Nicolas Dechesne <n-dechesne@ti.com>wrote:

> Here is a new attempt to add support for TI PandaBoard and PandaBoard ES.
>
> Many thanks for Arnout for his time reviewing all these versions!
>
> v4:
>  - add a config variable for SPL name since MLO is used on OMAP only
>  - changed the default SPL NAME to MLO in pandaboard config
>  - rebased on master branch as of 2012/03/18
>

can you please tell me if anything else is needed on my side to get this
series merged? Arnoud did several rounds of review, and we came up with
this v4. If there is any more updates , i can make them of course, but I
really wish this can get merged at some point.

cheers

nico
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20120326/6fec9938/attachment.html>