[Buildroot] Build failure on acmesystems_acqua_a5_{256,512}mb

[Buildroot] Build failure on acmesystems_acqua_a5_{256,512}mb

[Edgar Bonet]

Hello!

In the autobuild results from 2021-05-06, I noticed the following
failures:

-- 8< --
                   defconfig |                        link to the job                        | orph?
-----------------------------+---------------------------------------------------------------+------
  acmesystems_acqua_a5_256mb | https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157423  | ORPH 
  acmesystems_acqua_a5_512mb | https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157424  | ORPH
-- 8< --

Since I am the original submitter of these two defconfigs, I feel
somewhat responsible for their fate. I then tried to troubleshoot the
problem, but unfortunately I am@a loss, so I hope someone here will
be able to provide some assistance.

Below are the results of my (probably faulty) investigations.

Following the link to the first failed job, I found what I believe is
the relevant error message. While building linux 5.4.107:

-- 8< --
  HOSTCC  scripts/extract-cert
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
 #include <openssl/bio.h>
                         ^
compilation terminated.
-- 8< --

What follows in the build log is mostly recursive make recursively
complaining.

My understanding is that this was compiling a helper program meant to
run on the host. On my desktop, <openssl/bio.h> is provided by
libssl-dev, which I have installed long ago, and that would explain why
the build works for me. Apparently, the autobuilder did not have that
package, and I failed to require it in the defconfig. So far so good.

Now, my first problem is: I cannot find a host openssl package in
buildroot. And the buildroot documentation does not list this within the
system requirements. So my question is: where is <openssl/bio.h>
supposed to come from?

Then, while browsing the kernel docs, I stumbled on this:

    You will also need openssl development packages
    to build kernels 4.3 and higher.

But then, how come not every board defconfig using linux ? 4.3 is
failing? I found a few other defconfigs that use linux-5.4, do not
require any host package other than the ones I require here, and do not
seem to fail.

Any help would be appreciated, as I am feeling completely clueless.

Regards,

Edgar Bonet.

[Buildroot] Build failure on acmesystems_acqua_a5_{256,512}mb

[Baruch Siach]

Hi Edgar,

On Mon, May 10 2021, Edgar Bonet wrote:
> In the autobuild results from 2021-05-06, I noticed the following
> failures:
>
> -- 8< --
>                    defconfig |                        link to the job                        | orph?
> -----------------------------+---------------------------------------------------------------+------
>   acmesystems_acqua_a5_256mb | https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157423  | ORPH 
>   acmesystems_acqua_a5_512mb | https://gitlab.com/buildroot.org/buildroot/-/jobs/1240157424  | ORPH
> -- 8< --
>
> Since I am the original submitter of these two defconfigs, I feel
> somewhat responsible for their fate. I then tried to troubleshoot the
> problem, but unfortunately I am at a loss, so I hope someone here will
> be able to provide some assistance.
>
> Below are the results of my (probably faulty) investigations.
>
> Following the link to the first failed job, I found what I believe is
> the relevant error message. While building linux 5.4.107:
>
> -- 8< --
>   HOSTCC  scripts/extract-cert
> scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
>  #include <openssl/bio.h>
>                          ^
> compilation terminated.
> -- 8< --
>
> What follows in the build log is mostly recursive make recursively
> complaining.
>
> My understanding is that this was compiling a helper program meant to
> run on the host. On my desktop, <openssl/bio.h> is provided by
> libssl-dev, which I have installed long ago, and that would explain why
> the build works for me. Apparently, the autobuilder did not have that
> package, and I failed to require it in the defconfig. So far so good.
>
> Now, my first problem is: I cannot find a host openssl package in
> buildroot. And the buildroot documentation does not list this within the
> system requirements. So my question is: where is <openssl/bio.h>
> supposed to come from?

There is host-openssl. You can't select it from menuconfig, but you can
add it to _DEPENDENCIES.

> Then, while browsing the kernel docs, I stumbled on this:
>
>     You will also need openssl development packages
>     to build kernels 4.3 and higher.
>
> But then, how come not every board defconfig using linux ? 4.3 is
> failing? I found a few other defconfigs that use linux-5.4, do not
> require any host package other than the ones I require here, and do not
> seem to fail.

These configs select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL which adds
host-openssl to LINUX_DEPENDENCIES. See linux/linux.mk.

> Any help would be appreciated, as I am feeling completely clueless.

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

[Buildroot] Build failure on acmesystems_acqua_a5_{256,512}mb

[Edgar Bonet]

Hi!

Baruch wrote:
> These configs select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL which adds
> host-openssl to LINUX_DEPENDENCIES. See linux/linux.mk.

Thank-you for our help! I really missed that one. I am doing a test
build here with this extra option and, if all goes well, I'll submit a
patch.

Regards,

Edgar Bonet.