[Buildroot] connman dowload failure

[Buildroot] connman dowload failure

[Baruch Siach]

Hi Buildroot list,

I'm trying to build connman for my platform, but the build fails at the source 
download stage using both git and wget. This is the output of 'make V=1':

>>> connman 0.78 Downloading
if test -n "" ; then case "" in scp)    test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || scp  /connman-0.78.tar.gz /home/baruch/git/buildroot/output/dl && exit ;; *)    test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || wget --passive-ftp -nd  -P /home/baruch/git/buildroot/output/dl /connman-0.78.tar.gz && exit ;; esac ; fi ; if test -n "git://git.kernel.org/pub/scm/network/connman/connman.git" ; then case "git" in git)     test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || (pushd /home/baruch/git/buildroot/output/dl > /dev/null && git clone clone --bare git://git.kernel.org/pub/scm/network/connman/connman.git connman-0.78 && pushd connman-0.78 > /dev/null && git clone archive --format=tar --prefix=connman-0.78/ 0.78 | gzip -c > /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz && popd > /dev/null && rm -rf /home/baruch/git/buildroot/output/dl/connman-0.78 && popd > /dev/null) && exit ;; svn)   test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || (pushd /home/baruch/git/buildroot/output/dl > /dev/null && svn export -r 0.78 git://git.kernel.org/pub/scm/network/connman/connman.git /home/baruch/git/buildroot/output/dl/connman-0.78 && tar czf connman-0.78.tar.gz connman-0.78/ && rm -rf /home/baruch/git/buildroot/output/dl/connman-0.78 && popd > /dev/null) && exit ;; bzr)  test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || bzr export /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz git://git.kernel.org/pub/scm/network/connman/connman.git -r 0.78 && exit ;; file)   test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || cp git://git.kernel.org/pub/scm/network/connman/connman.git/connman-0.78.tar.gz /home/baruch/git/buildroot/output/dl && exit ;; scp)    test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || scp  git.kernel.org/pub/scm/network/connman/connman.git/connman-0.78.tar.gz /home/baruch/git/buildroot/output/dl && exit ;; hg)     test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || (pushd /home/baruch/git/buildroot/output/dl > /dev/null && hg  clone --noupdate --rev 0.78 git://git.kernel.org/pub/scm/network/connman/connman.git connman-0.78 && hg  archive --repository connman-0.78 --type tgz --prefix connman-0.78/ --rev 0.78 /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz && rm -rf /home/baruch/git/buildroot/output/dl/connman-0.78 && popd > /dev/null) && exit ;; *)  test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || wget --passive-ftp -nd  -P /home/baruch/git/buildroot/output/dl git://git.kernel.org/pub/scm/network/connman/connman.git/connman-0.78.tar.gz && exit ;; esac ; fi ; if test -n "http://buildroot.net/downloads/sources/" ; then     test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || wget --passive-ftp -nd  -P /home/baruch/git/buildroot/output/dl http://buildroot.net/downloads/sources//connman-0.78.tar.gz && exit ; fi ; exit 1
Too many arguments.

usage: git clone [options] [--] <repo> [<dir>]

    -v, --verbose         be more verbose
    -q, --quiet           be more quiet
    --progress            force progress reporting
    -n, --no-checkout     don't create a checkout
    --bare                create a bare repository
    --mirror              create a mirror repository (implies bare)
    -l, --local           to clone from a local repository
    --no-hardlinks        don't use local hardlinks, always copy
    -s, --shared          setup as shared repository
    --recursive           initialize submodules in the clone
    --recurse-submodules  initialize submodules in the clone
    --template <template-directory>
                          directory from which templates will be used
    --reference <repo>    reference repository
    -o, --origin <branch>
                          use <branch> instead of 'origin' to track upstream
    -b, --branch <branch>
                          checkout <branch> instead of the remote's HEAD
    -u, --upload-pack <path>
                          path to git-upload-pack on the remote
    --depth <depth>       create a shallow clone of that depth
    --separate-git-dir <gitdir>
                          separate git dir from working tree
    -c, --config <key=value>
                          set config inside the new repository

--2011-12-12 14:01:25--  http://buildroot.net/downloads/sources//connman-0.78.tar.gz
Resolving buildroot.net (buildroot.net)... 140.211.167.224
Connecting to buildroot.net (buildroot.net)|140.211.167.224|:80... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: http://sources.buildroot.net//connman-0.78.tar.gz [following]
--2011-12-12 14:01:30--  http://sources.buildroot.net//connman-0.78.tar.gz
Resolving sources.buildroot.net (sources.buildroot.net)... 176.9.16.109
Connecting to sources.buildroot.net (sources.buildroot.net)|176.9.16.109|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2011-12-12 14:01:30 ERROR 404: Not Found.

make: *** [/home/baruch/git/buildroot/output/build/connman-0.78/.stamp_downloaded] Error 1

baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[Buildroot] connman dowload failure

[Peter Korsgaard]

>>>>> "Baruch" == Baruch Siach <baruch@tkos.co.il> writes:

 Baruch> Hi Buildroot list,
 Baruch> I'm trying to build connman for my platform, but the build fails at the source 
 Baruch> download stage using both git and wget. This is the output of 'make V=1':

 >>>> connman 0.78 Downloading

 Baruch>  test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || (pushd /home/baruch/git/buildroot/output/dl > /dev/null && git clone clone --bare git://git.kernel.org/pub/scm/network/connman/connman.git connman-0.78 && pushd connman-0.78 > /dev/null && git clone archive --format=tar --prefix=connman-0.78/ 0.78 | gzip -c > /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz && popd > /dev/null && rm -rf /home/baruch/git/buildroot/output/dl/connman-0.78 && popd > /dev/null) && exit 

This is caused by cf71111b99ab951 (Cleanup the VCS commands
configuration). The BR2_GIT variable changed from "git clone" to just
"git". If you change that in your .config it should work again.

-- 
Bye, Peter Korsgaard

[Buildroot] connman dowload failure

[Peter Korsgaard]

>>>>> "Peter" == Peter Korsgaard <jacmet@uclibc.org> writes:

Hi,

 Peter> This is caused by cf71111b99ab951 (Cleanup the VCS commands
 Peter> configuration). The BR2_GIT variable changed from "git clone" to just
 Peter> "git". If you change that in your .config it should work again.

This breakage is indeed a bit unfortunate. For this (and other) reason
it is a good idea to work with defconfig files which only contain the
non-default settings (make savedefconfig).

-- 
Bye, Peter Korsgaard

[Buildroot] connman dowload failure

[Baruch Siach]

Hi Peter,

On Mon, Dec 12, 2011 at 01:26:41PM +0100, Peter Korsgaard wrote:
> >>>>> "Baruch" == Baruch Siach <baruch@tkos.co.il> writes:
> 
>  Baruch> Hi Buildroot list,
>  Baruch> I'm trying to build connman for my platform, but the build fails at the source 
>  Baruch> download stage using both git and wget. This is the output of 'make V=1':
> 
>  >>>> connman 0.78 Downloading
> 
>  Baruch>  test -e /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz || (pushd /home/baruch/git/buildroot/output/dl > /dev/null && git clone clone --bare git://git.kernel.org/pub/scm/network/connman/connman.git connman-0.78 && pushd connman-0.78 > /dev/null && git clone archive --format=tar --prefix=connman-0.78/ 0.78 | gzip -c > /home/baruch/git/buildroot/output/dl/connman-0.78.tar.gz && popd > /dev/null && rm -rf /home/baruch/git/buildroot/output/dl/connman-0.78 && popd > /dev/null) && exit 
> 
> This is caused by cf71111b99ab951 (Cleanup the VCS commands
> configuration). The BR2_GIT variable changed from "git clone" to just
> "git". If you change that in your .config it should work again.

Thanks for the tip.

Eventually I had to manually clone connman.git with http, and generate a tar 
file because of a stupid firewall rule blocking the native git port :-(.

Can you put a connman tar file in http://sources.buildroot.net for others 
similarly unlucky, so that at least the wget fallback will succeed?

Thanks,
baruch

-- 
                                                     ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -

[Buildroot] connman dowload failure

[Peter Korsgaard]

>>>>> "Baruch" == Baruch Siach <baruch@tkos.co.il> writes:

Hi,

 Baruch> Can you put a connman tar file in http://sources.buildroot.net
 Baruch> for others similarly unlucky, so that at least the wget
 Baruch> fallback will succeed?

Yes, I have a script running every Wednesday doing that.

-- 
Bye, Peter Korsgaard