* [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25
@ 2016-02-05 18:08 Angelo Compagnucci
2016-02-11 8:48 ` Angelo Compagnucci
2016-02-17 15:59 ` Peter Korsgaard
0 siblings, 2 replies; 5+ messages in thread
From: Angelo Compagnucci @ 2016-02-05 18:08 UTC (permalink / raw)
To: buildroot
This patch adds a minimal working configuration for
Acmesystems Arietta g25.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
---
Changelog:
v3 -> v3:
* Fixing missing DOSFSTOOLS, MTOOLS
* Rewording of readme.txt
v1 -> v2:
* Using genimage for image generation, updating documentation
accordingly.
board/acmesystems/arietta-g25/genimage.cfg | 35 +++++++++++++++++++
board/acmesystems/arietta-g25/post-image.sh | 16 +++++++++
board/acmesystems/arietta-g25/readme.txt | 45 +++++++++++++++++++++++++
configs/acmesystems_arietta_g25_128mb_defconfig | 33 ++++++++++++++++++
configs/acmesystems_arietta_g25_256mb_defconfig | 33 ++++++++++++++++++
5 files changed, 162 insertions(+)
create mode 100644 board/acmesystems/arietta-g25/genimage.cfg
create mode 100755 board/acmesystems/arietta-g25/post-image.sh
create mode 100644 board/acmesystems/arietta-g25/readme.txt
create mode 100644 configs/acmesystems_arietta_g25_128mb_defconfig
create mode 100644 configs/acmesystems_arietta_g25_256mb_defconfig
diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg
new file mode 100644
index 0000000..d69d403
--- /dev/null
+++ b/board/acmesystems/arietta-g25/genimage.cfg
@@ -0,0 +1,35 @@
+# Minimal SD card image for the Acmesystems Arietta G25
+#
+image boot.vfat {
+ vfat {
+ file zImage {
+ image = "zImage"
+ }
+
+ file acme-arietta.dtb {
+ image = "at91-ariag25.dtb"
+ }
+
+ file boot.bin{
+ image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
+ }
+ }
+ size = 16M
+}
+
+image sdcard.img {
+ hdimage {
+ }
+
+ partition boot {
+ partition-type = 0xC
+ bootable = "true"
+ image = "boot.vfat"
+ }
+
+ partition rootfs {
+ partition-type = 0x83
+ image = "rootfs.ext4"
+ size = 512M
+ }
+}
diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh
new file mode 100755
index 0000000..c82b189
--- /dev/null
+++ b/board/acmesystems/arietta-g25/post-image.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+ --rootpath "${TARGET_DIR}" \
+ --tmppath "${GENIMAGE_TMP}" \
+ --inputpath "${BINARIES_DIR}" \
+ --outputpath "${BINARIES_DIR}" \
+ --config "${GENIMAGE_CFG}"
+
+exit $?
diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt
new file mode 100644
index 0000000..3680b95
--- /dev/null
+++ b/board/acmesystems/arietta-g25/readme.txt
@@ -0,0 +1,45 @@
+Acmesystems Arietta G25
+
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Arietta G25. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+You can find additional informations, tutorials and a very comprehensive
+documentation on http://www.acmesystems.it/arietta.
+
+Build instructions
+==================
+
+To build an image for the arietta g25 choose the configuration
+corresponding to the arietta variant.
+
+For 128MB RAM variant type:
+
+$ make acmesystems_arietta_g25_128mb_defconfig
+
+else for 256MB RAM variant type:
+
+$ make acmesystems_arietta_g25_256mb_defconfig
+
+then:
+
+$ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+ $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the microSD card into the arietta slot and power it.
+
+The image just built is fairly basic and the only output
+you will get is on serial console, please consider to use a DPI
+cable (http://www.acmesystems.it/DPI)
diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
new file mode 100644
index 0000000..e7f1dee
--- /dev/null
+++ b/configs/acmesystems_arietta_g25_128mb_defconfig
@@ -0,0 +1,33 @@
+# Architecture
+BR2_arm=y
+
+# Toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.1.1"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
+BR2_LINUX_KERNEL_XZ=y
+
+# Bootloader
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_MTOOLS=y
diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig
new file mode 100644
index 0000000..8c39001
--- /dev/null
+++ b/configs/acmesystems_arietta_g25_256mb_defconfig
@@ -0,0 +1,33 @@
+# Architecture
+BR2_arm=y
+
+# Toolchain
+BR2_KERNEL_HEADERS_VERSION=y
+BR2_DEFAULT_KERNEL_VERSION="4.1.1"
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
+BR2_LINUX_KERNEL_XZ=y
+
+# Bootloader
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
+BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
+
+# Image
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_MTOOLS=y
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25
2016-02-05 18:08 [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25 Angelo Compagnucci
@ 2016-02-11 8:48 ` Angelo Compagnucci
2016-02-11 16:26 ` Peter Korsgaard
2016-02-17 15:59 ` Peter Korsgaard
1 sibling, 1 reply; 5+ messages in thread
From: Angelo Compagnucci @ 2016-02-11 8:48 UTC (permalink / raw)
To: buildroot
Dear Thomas Petazzoni, Peter Korsgaard,
No way to have it included at this point in time, right?
I rally wanted to have it included for 2016.02 release!
Sincerely, Angelo
2016-02-05 19:08 GMT+01:00 Angelo Compagnucci <angelo.compagnucci@gmail.com>:
> This patch adds a minimal working configuration for
> Acmesystems Arietta g25.
>
> Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
> ---
> Changelog:
> v3 -> v3:
>
> * Fixing missing DOSFSTOOLS, MTOOLS
> * Rewording of readme.txt
>
> v1 -> v2:
>
> * Using genimage for image generation, updating documentation
> accordingly.
>
> board/acmesystems/arietta-g25/genimage.cfg | 35 +++++++++++++++++++
> board/acmesystems/arietta-g25/post-image.sh | 16 +++++++++
> board/acmesystems/arietta-g25/readme.txt | 45 +++++++++++++++++++++++++
> configs/acmesystems_arietta_g25_128mb_defconfig | 33 ++++++++++++++++++
> configs/acmesystems_arietta_g25_256mb_defconfig | 33 ++++++++++++++++++
> 5 files changed, 162 insertions(+)
> create mode 100644 board/acmesystems/arietta-g25/genimage.cfg
> create mode 100755 board/acmesystems/arietta-g25/post-image.sh
> create mode 100644 board/acmesystems/arietta-g25/readme.txt
> create mode 100644 configs/acmesystems_arietta_g25_128mb_defconfig
> create mode 100644 configs/acmesystems_arietta_g25_256mb_defconfig
>
> diff --git a/board/acmesystems/arietta-g25/genimage.cfg b/board/acmesystems/arietta-g25/genimage.cfg
> new file mode 100644
> index 0000000..d69d403
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/genimage.cfg
> @@ -0,0 +1,35 @@
> +# Minimal SD card image for the Acmesystems Arietta G25
> +#
> +image boot.vfat {
> + vfat {
> + file zImage {
> + image = "zImage"
> + }
> +
> + file acme-arietta.dtb {
> + image = "at91-ariag25.dtb"
> + }
> +
> + file boot.bin{
> + image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.7.bin"
> + }
> + }
> + size = 16M
> +}
> +
> +image sdcard.img {
> + hdimage {
> + }
> +
> + partition boot {
> + partition-type = 0xC
> + bootable = "true"
> + image = "boot.vfat"
> + }
> +
> + partition rootfs {
> + partition-type = 0x83
> + image = "rootfs.ext4"
> + size = 512M
> + }
> +}
> diff --git a/board/acmesystems/arietta-g25/post-image.sh b/board/acmesystems/arietta-g25/post-image.sh
> new file mode 100755
> index 0000000..c82b189
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/post-image.sh
> @@ -0,0 +1,16 @@
> +#!/bin/sh
> +
> +BOARD_DIR="$(dirname $0)"
> +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
> +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
> +
> +rm -rf "${GENIMAGE_TMP}"
> +
> +genimage \
> + --rootpath "${TARGET_DIR}" \
> + --tmppath "${GENIMAGE_TMP}" \
> + --inputpath "${BINARIES_DIR}" \
> + --outputpath "${BINARIES_DIR}" \
> + --config "${GENIMAGE_CFG}"
> +
> +exit $?
> diff --git a/board/acmesystems/arietta-g25/readme.txt b/board/acmesystems/arietta-g25/readme.txt
> new file mode 100644
> index 0000000..3680b95
> --- /dev/null
> +++ b/board/acmesystems/arietta-g25/readme.txt
> @@ -0,0 +1,45 @@
> +Acmesystems Arietta G25
> +
> +Intro
> +=====
> +
> +This default configuration will allow you to start experimenting with the
> +buildroot environment for the Arietta G25. With the current configuration
> +it will bring-up the board, and allow access through the serial console.
> +
> +You can find additional informations, tutorials and a very comprehensive
> +documentation on http://www.acmesystems.it/arietta.
> +
> +Build instructions
> +==================
> +
> +To build an image for the arietta g25 choose the configuration
> +corresponding to the arietta variant.
> +
> +For 128MB RAM variant type:
> +
> +$ make acmesystems_arietta_g25_128mb_defconfig
> +
> +else for 256MB RAM variant type:
> +
> +$ make acmesystems_arietta_g25_256mb_defconfig
> +
> +then:
> +
> +$ make
> +
> +How to write the microSD card
> +=============================
> +
> +Once the build process is finished you will have an image called "sdcard.img"
> +in the output/images/ directory.
> +
> +Copy the bootable "sdcard.img" onto an SD card with "dd":
> +
> + $ sudo dd if=output/images/sdcard.img of=/dev/sdX
> +
> +Insert the microSD card into the arietta slot and power it.
> +
> +The image just built is fairly basic and the only output
> +you will get is on serial console, please consider to use a DPI
> +cable (http://www.acmesystems.it/DPI)
> diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
> new file mode 100644
> index 0000000..e7f1dee
> --- /dev/null
> +++ b/configs/acmesystems_arietta_g25_128mb_defconfig
> @@ -0,0 +1,33 @@
> +# Architecture
> +BR2_arm=y
> +
> +# Toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="4.1.1"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> +BR2_LINUX_KERNEL_XZ=y
> +
> +# Bootloader
> +BR2_TARGET_AT91BOOTSTRAP3=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-128m"
> +
> +# Image
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/acmesystems_arietta_g25_256mb_defconfig b/configs/acmesystems_arietta_g25_256mb_defconfig
> new file mode 100644
> index 0000000..8c39001
> --- /dev/null
> +++ b/configs/acmesystems_arietta_g25_256mb_defconfig
> @@ -0,0 +1,33 @@
> +# Architecture
> +BR2_arm=y
> +
> +# Toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="4.1.1"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
> +
> +# Kernel
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.1"
> +BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-ariag25"
> +BR2_LINUX_KERNEL_XZ=y
> +
> +# Bootloader
> +BR2_TARGET_AT91BOOTSTRAP3=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="git://github.com/tanzilli/at91bootstrap.git"
> +BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="cedbde4b36695b715f469f4872f47e5cc8115000"
> +BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="arietta-256m"
> +
> +# Image
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/acmesystems/arietta-g25/post-image.sh"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> --
> 1.9.1
>
--
Profile: http://it.linkedin.com/in/compagnucciangelo
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25
2016-02-11 8:48 ` Angelo Compagnucci
@ 2016-02-11 16:26 ` Peter Korsgaard
2016-02-11 16:29 ` Angelo Compagnucci
0 siblings, 1 reply; 5+ messages in thread
From: Peter Korsgaard @ 2016-02-11 16:26 UTC (permalink / raw)
To: buildroot
>>>>> "Angelo" == Angelo Compagnucci <angelo.compagnucci@gmail.com> writes:
> Dear Thomas Petazzoni, Peter Korsgaard,
> No way to have it included at this point in time, right?
Strictly no, but it cannot really cause regressions for anything else so
I'll takke a look tonight.
What is the relation between "Arietta g25" and our existing "Aria g25"?
Do we need seperate defconfigs / board support for both?
--
Venlig hilsen,
Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25
2016-02-11 16:26 ` Peter Korsgaard
@ 2016-02-11 16:29 ` Angelo Compagnucci
0 siblings, 0 replies; 5+ messages in thread
From: Angelo Compagnucci @ 2016-02-11 16:29 UTC (permalink / raw)
To: buildroot
Dear Peter Korsgaard
2016-02-11 17:26 GMT+01:00 Peter Korsgaard <peter@korsgaard.com>:
>>>>>> "Angelo" == Angelo Compagnucci <angelo.compagnucci@gmail.com> writes:
>
> > Dear Thomas Petazzoni, Peter Korsgaard,
> > No way to have it included at this point in time, right?
>
> Strictly no, but it cannot really cause regressions for anything else so
> I'll takke a look tonight.
>
> What is the relation between "Arietta g25" and our existing "Aria g25"?
> Do we need seperate defconfigs / board support for both?
They have the same cpu but are different boards and have differet
bootloader / memory configurations. So yes, we need support for both.
Sincerely, Angelo.
>
> --
> Venlig hilsen,
> Peter Korsgaard
--
Profile: http://it.linkedin.com/in/compagnucciangelo
^ permalink raw reply [flat|nested] 5+ messages in thread
* [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25
2016-02-05 18:08 [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25 Angelo Compagnucci
2016-02-11 8:48 ` Angelo Compagnucci
@ 2016-02-17 15:59 ` Peter Korsgaard
1 sibling, 0 replies; 5+ messages in thread
From: Peter Korsgaard @ 2016-02-17 15:59 UTC (permalink / raw)
To: buildroot
>>>>> "Angelo" == Angelo Compagnucci <angelo.compagnucci@gmail.com> writes:
> This patch adds a minimal working configuration for
> Acmesystems Arietta g25.
> Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
> ---
> Changelog:
> v3 -> v3:
> * Fixing missing DOSFSTOOLS, MTOOLS
> * Rewording of readme.txt
> v1 -> v2:
> * Using genimage for image generation, updating documentation
> accordingly.
> board/acmesystems/arietta-g25/genimage.cfg | 35 +++++++++++++++++++
> board/acmesystems/arietta-g25/post-image.sh | 16 +++++++++
> board/acmesystems/arietta-g25/readme.txt | 45 +++++++++++++++++++++++++
> configs/acmesystems_arietta_g25_128mb_defconfig | 33 ++++++++++++++++++
> configs/acmesystems_arietta_g25_256mb_defconfig | 33 ++++++++++++++++++
> 5 files changed, 162 insertions(+)
> create mode 100644 board/acmesystems/arietta-g25/genimage.cfg
> create mode 100755 board/acmesystems/arietta-g25/post-image.sh
> create mode 100644 board/acmesystems/arietta-g25/readme.txt
> create mode 100644 configs/acmesystems_arietta_g25_128mb_defconfig
> create mode 100644 configs/acmesystems_arietta_g25_256mb_defconfig
> +The image just built is fairly basic and the only output
> +you will get is on serial console, please consider to use a DPI
> +cable (http://www.acmesystems.it/DPI)
There's a number of trailing spaces here and elsewhere in the readme.txt
> diff --git a/configs/acmesystems_arietta_g25_128mb_defconfig b/configs/acmesystems_arietta_g25_128mb_defconfig
> new file mode 100644
> index 0000000..e7f1dee
> --- /dev/null
> +++ b/configs/acmesystems_arietta_g25_128mb_defconfig
> @@ -0,0 +1,33 @@
> +# Architecture
> +BR2_arm=y
> +
> +# Toolchain
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="4.1.1"
With our new same-as-kernel version handling
(BR2_KERNEL_HEADERS_AS_KERNEL) these two lines can be dropped.
Committed with these fixes, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-02-17 15:59 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-05 18:08 [Buildroot] [PATCH v3] board: Add support for Acmesystems Arietta g25 Angelo Compagnucci
2016-02-11 8:48 ` Angelo Compagnucci
2016-02-11 16:26 ` Peter Korsgaard
2016-02-11 16:29 ` Angelo Compagnucci
2016-02-17 15:59 ` Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox