* [Buildroot] buildroot 2021.02.1: black screen after Xorg launched
@ 2023-10-13 21:09 Zvi Vered
2023-10-13 21:29 ` Peter Korsgaard
0 siblings, 1 reply; 3+ messages in thread
From: Zvi Vered @ 2023-10-13 21:09 UTC (permalink / raw)
To: buildroot
Hello,
Using buildroot 2021.02.1 for x64 I built root file system that contain Xorg.
Right after Xorg is launched I got black screen.
According to Xorg.0.0.log (attached) there is no error.
I tried to run: xeyes and got:
Can't open display
I noticed the following lines in Xorg.0.0.log:
Code:
[ 5.116] (==) No Layout section. Using the first Screen section.
[ 5.116] (==) No screen section available. Using defaults.
[ 5.116] (**) |-->Screen "Default Screen Section" (0)
[ 5.116] (**) | |-->Monitor "<default monitor>"
[ 5.117] (==) No monitor specified for screen "Default Screen Section".
On the same PC I booted Knoppix 9.1. Xorg works fine.
I noticed that Knoppix contains several files in:
/usr/share/X11/xorg.conf.d
But in my file system this folder contains only the file: 10-quirks.conf
Can you please advise what can be the reason for the black screen ?
Thank you,
Zvika
-------------------------------------------------------------Xorg.0.0.log
-------------------------------------
[ 5.080]
X.Org X Server 1.20.10
X Protocol Version 11, Revision 0
[ 5.080] Build Operating System: Linux 5.4.0-150-generic x86_64
[ 5.080] Current Operating System: Linux buildroot 4.19.135 #2 SMP
Sat Aug 12 21:28:59 IDT 2023 x86_64
[ 5.080] Kernel command line: BOOT_IMAGE=/boot/bzImage
root=/dev/sdb2 ip=:::::eth0:on
[ 5.080] Build Date: 09 October 2023 11:15:40PM
[ 5.080]
[ 5.080] Current version of pixman: 0.40.0
[ 5.080] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5.080] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5.080] (==) Log file: "/var/log/Xorg.0.0.log", Time: Fri Oct 13
23:00:12 2023
[ 5.082] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5.083] (==) No Layout section. Using the first Screen section.
[ 5.083] (==) No screen section available. Using defaults.
[ 5.083] (**) |-->Screen "Default Screen Section" (0)
[ 5.083] (**) | |-->Monitor "<default monitor>"
[ 5.083] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 5.083] (==) Automatically adding devices
[ 5.083] (==) Automatically enabling devices
[ 5.083] (==) Automatically adding GPU devices
[ 5.084] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 5.085] (WW) The directory "/usr/share/fonts/X11//TTF/" does not exist.
[ 5.085] Entry deleted from font path.
[ 5.085] (WW) The directory "/usr/share/fonts/X11//OTF/" does not exist.
[ 5.085] Entry deleted from font path.
[ 5.085] (WW) The directory "/usr/share/fonts/X11//Type1/" does not exist.
[ 5.085] Entry deleted from font path.
[ 5.086] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11//100dpi/".
[ 5.086] Entry deleted from font path.
[ 5.086] (Run 'mkfontdir' on "/usr/share/fonts/X11//100dpi/").
[ 5.086] (WW) `fonts.dir' not found (or not valid) in
"/usr/share/fonts/X11//75dpi/".
[ 5.086] Entry deleted from font path.
[ 5.086] (Run 'mkfontdir' on "/usr/share/fonts/X11//75dpi/").
[ 5.086] (==) FontPath set to:
/usr/share/fonts/X11//misc/
[ 5.086] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 5.086] (II) The server relies on udev to provide the list of
input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 5.086] (II) Loader magic: 0x5feb40
[ 5.086] (II) Module ABI versions:
[ 5.086] X.Org ANSI C Emulation: 0.4
[ 5.086] X.Org Video Driver: 24.1
[ 5.086] X.Org XInput driver : 24.1
[ 5.086] X.Org Server Extension : 10.0
[ 5.086] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5.100] (--) PCI:*(0@0:2:0) 8086:3e92:1043:872f rev 0, Mem @
0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @
0x????????/131072
[ 5.100] (--) PCI: (1@0:0:0) 10de:1b06:1043:85e5 rev 161, Mem @
0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @
0x0000e000/128, BIOS @ 0x????????/524288
[ 5.100] (WW) Open ACPI failed (/var/run/acpid.socket) (No such
file or directory)
[ 5.100] (==) Matched intel as autoconfigured driver 0
[ 5.100] (==) Matched modesetting as autoconfigured driver 1
[ 5.100] (==) Matched fbdev as autoconfigured driver 2
[ 5.100] (==) Matched vesa as autoconfigured driver 3
[ 5.100] (==) Assigned the driver to the xf86ConfigLayout
[ 5.100] (II) LoadModule: "intel"
[ 5.101] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5.104] (II) Module intel: vendor="X.Org Foundation"
[ 5.104] compiled for 1.20.10, module version = 2.99.917
[ 5.104] Module class: X.Org Video Driver
[ 5.104] ABI class: X.Org Video Driver, version 24.1
[ 5.104] (II) LoadModule: "modesetting"
[ 5.104] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 5.105] (II) Module modesetting: vendor="X.Org Foundation"
[ 5.105] compiled for 1.20.10, module version = 1.20.10
[ 5.105] Module class: X.Org Video Driver
[ 5.105] ABI class: X.Org Video Driver, version 24.1
[ 5.106] (II) LoadModule: "fbdev"
[ 5.106] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 5.106] (II) Module fbdev: vendor="X.Org Foundation"
[ 5.106] compiled for 1.20.10, module version = 0.5.0
[ 5.106] Module class: X.Org Video Driver
[ 5.106] ABI class: X.Org Video Driver, version 24.1
[ 5.106] (II) LoadModule: "vesa"
[ 5.106] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 5.107] (II) Module vesa: vendor="X.Org Foundation"
[ 5.107] compiled for 1.20.10, module version = 2.5.0
[ 5.107] Module class: X.Org Video Driver
[ 5.107] ABI class: X.Org Video Driver, version 24.1
[ 5.107] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5.107] (II) intel: Driver for Intel(R) HD Graphics
[ 5.107] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 5.107] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 5.107] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 5.107] (II) FBDEV: driver for framebuffer: fbdev
[ 5.107] (II) VESA: driver for VESA chipsets: vesa
[ 5.107] (++) using VT number 1
[ 5.107] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 5.108] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20180719
[ 5.122] (WW) Falling back to old probe method for modesetting
[ 5.122] (WW) Falling back to old probe method for fbdev
[ 5.122] (II) Loading sub module "fbdevhw"
[ 5.122] (II) LoadModule: "fbdevhw"
[ 5.123] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 5.123] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 5.123] compiled for 1.20.10, module version = 0.0.2
[ 5.123] ABI class: X.Org Video Driver, version 24.1
[ 5.124] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 5.124] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2; using a maximum of 6 threads
[ 5.124] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 5.124] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 5.124] (==) intel(0): RGB weight 888
[ 5.124] (==) intel(0): Default visual is TrueColor
[ 5.126] (II) intel(0): Output HDMI1 has no monitor section
[ 5.126] (II) intel(0): Enabled output HDMI1
[ 5.126] (II) intel(0): Output HDMI2 has no monitor section
[ 5.126] (II) intel(0): Enabled output HDMI2
[ 5.126] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 5.126] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 5.126] (II) intel(0): Enabled output VIRTUAL1
[ 5.126] (--) intel(0): Output HDMI1 using initial mode 1920x1080 on pipe 0
[ 5.127] (==) intel(0): TearFree enabled
[ 5.127] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.127] (==) intel(0): DPI set to (96, 96)
[ 5.127] (II) Loading sub module "dri3"
[ 5.127] (II) LoadModule: "dri3"
[ 5.127] (II) Module "dri3" already built-in
[ 5.127] (II) Loading sub module "dri2"
[ 5.127] (II) LoadModule: "dri2"
[ 5.127] (II) Module "dri2" already built-in
[ 5.127] (II) Loading sub module "present"
[ 5.127] (II) LoadModule: "present"
[ 5.127] (II) Module "present" already built-in
[ 5.127] (II) UnloadModule: "modesetting"
[ 5.127] (II) Unloading modesetting
[ 5.127] (II) UnloadModule: "fbdev"
[ 5.127] (II) Unloading fbdev
[ 5.127] (II) UnloadSubModule: "fbdevhw"
[ 5.127] (II) Unloading fbdevhw
[ 5.127] (II) UnloadModule: "vesa"
[ 5.127] (II) Unloading vesa
[ 5.130] (II) intel(0): SNA initialized with Coffeelake (gen9) backend
[ 5.130] (==) intel(0): Backing store disabled
[ 5.130] (==) intel(0): Silken mouse enabled
[ 5.131] (II) intel(0): HW Cursor enabled
[ 5.131] (==) intel(0): DPMS enabled
[ 5.132] (==) intel(0): Display hotplug detection enabled
[ 5.132] (II) intel(0): [DRI2] Setup complete
[ 5.132] (II) intel(0): [DRI2] DRI driver: i965
[ 5.132] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 5.132] (II) intel(0): direct rendering: DRI2 enabled
[ 5.132] (II) intel(0): hardware support for Present enabled
[ 5.132] (II) Initializing extension Generic Event Extension
[ 5.132] (II) Initializing extension SHAPE
[ 5.132] (II) Initializing extension MIT-SHM
[ 5.132] (II) Initializing extension XInputExtension
[ 5.132] (II) Initializing extension XTEST
[ 5.132] (II) Initializing extension BIG-REQUESTS
[ 5.132] (II) Initializing extension SYNC
[ 5.132] (II) Initializing extension XKEYBOARD
[ 5.132] (II) Initializing extension XC-MISC
[ 5.132] (II) Initializing extension XFIXES
[ 5.132] (II) Initializing extension RENDER
[ 5.132] (II) Initializing extension RANDR
[ 5.132] (II) Initializing extension DAMAGE
[ 5.132] (II) Initializing extension DOUBLE-BUFFER
[ 5.132] (II) Initializing extension RECORD
[ 5.132] (II) Initializing extension DPMS
[ 5.132] (II) Initializing extension Present
[ 5.132] (II) Initializing extension DRI3
[ 5.132] (II) Initializing extension X-Resource
[ 5.132] (II) Initializing extension XVideo
[ 5.132] (II) Initializing extension XVideo-MotionCompensation
[ 5.132] (II) Initializing extension XFree86-VidModeExtension
[ 5.132] (II) Initializing extension XFree86-DGA
[ 5.132] (II) Initializing extension DRI2
[ 5.137] (II) intel(0): switch to mode 1920x1080@60.0 on HDMI1
using pipe 0, position (0, 0), rotation normal, reflection none
[ 5.144] (II) intel(0): Setting screen physical size to 508 x 285
[ 5.214] (II) config/udev: Adding input device Power Button
(/dev/input/event2)
[ 5.214] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.214] (II) LoadModule: "evdev"
[ 5.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.217] (II) Module evdev: vendor="X.Org Foundation"
[ 5.217] compiled for 1.20.10, module version = 2.10.6
[ 5.217] Module class: X.Org XInput Driver
[ 5.217] ABI class: X.Org XInput driver, version 24.1
[ 5.217] (II) Using input driver 'evdev' for 'Power Button'
[ 5.217] (**) Power Button: always reports core events
[ 5.217] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 5.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.217] (--) evdev: Power Button: Found keys
[ 5.217] (II) evdev: Power Button: Configuring as keyboard
[ 5.217] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 5.217] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 6)
[ 5.217] (**) Option "xkb_rules" "evdev"
[ 5.217] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[ 5.217] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 5.217] (II) Using input driver 'evdev' for 'Video Bus'
[ 5.217] (**) Video Bus: always reports core events
[ 5.217] (**) evdev: Video Bus: Device: "/dev/input/event3"
[ 5.217] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 5.217] (--) evdev: Video Bus: Found keys
[ 5.217] (II) evdev: Video Bus: Configuring as keyboard
[ 5.217] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event3"
[ 5.217] (II) XINPUT: Adding extended input device "Video Bus"
(type: KEYBOARD, id 7)
[ 5.217] (**) Option "xkb_rules" "evdev"
[ 5.217] (II) config/udev: Adding input device Power Button
(/dev/input/event1)
[ 5.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.217] (II) Using input driver 'evdev' for 'Power Button'
[ 5.217] (**) Power Button: always reports core events
[ 5.217] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.217] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.217] (--) evdev: Power Button: Found keys
[ 5.217] (II) evdev: Power Button: Configuring as keyboard
[ 5.217] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 5.217] (II) XINPUT: Adding extended input device "Power Button"
(type: KEYBOARD, id 8)
[ 5.217] (**) Option "xkb_rules" "evdev"
[ 5.218] (II) config/udev: Adding input device Sleep Button
(/dev/input/event0)
[ 5.218] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 5.218] (II) Using input driver 'evdev' for 'Sleep Button'
[ 5.218] (**) Sleep Button: always reports core events
[ 5.218] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[ 5.218] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 5.218] (--) evdev: Sleep Button: Found keys
[ 5.218] (II) evdev: Sleep Button: Configuring as keyboard
[ 5.218] (**) Option "config_info"
"udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[ 5.218] (II) XINPUT: Adding extended input device "Sleep Button"
(type: KEYBOARD, id 9)
[ 5.218] (**) Option "xkb_rules" "evdev"
[ 5.218] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed (/dev/input/event4)
[ 5.218] (**) Razer Razer DeathAdder V2 X HyperSpeed: Applying
InputClass "evdev pointer catchall"
[ 5.218] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed'
[ 5.218] (**) Razer Razer DeathAdder V2 X HyperSpeed: always
reports core events
[ 5.218] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Device: "/dev/input/event4"
[ 5.270] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Vendor 0x1532 Product 0x9c
[ 5.270] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed: Found
9 mouse buttons
[ 5.270] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed: Found
scroll wheel(s)
[ 5.270] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed: Found
relative axes
[ 5.270] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed: Found
x and y relative axes
[ 5.270] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Configuring as mouse
[ 5.270] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Adding scrollwheel support
[ 5.270] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
YAxisMapping: buttons 4 and 5
[ 5.270] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
[ 5.270] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:1532:009C.0001/input/input4/event4"
[ 5.270] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed" (type: MOUSE, id 10)
[ 5.270] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
initialized for relative axes.
[ 5.270] (**) Razer Razer DeathAdder V2 X HyperSpeed: (accel)
keeping acceleration scheme 1
[ 5.270] (**) Razer Razer DeathAdder V2 X HyperSpeed: (accel)
acceleration profile 0
[ 5.270] (**) Razer Razer DeathAdder V2 X HyperSpeed: (accel)
acceleration factor: 2.000
[ 5.270] (**) Razer Razer DeathAdder V2 X HyperSpeed: (accel)
acceleration threshold: 4
[ 5.271] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed Keyboard (/dev/input/event5)
[ 5.271] (**) Razer Razer DeathAdder V2 X HyperSpeed Keyboard:
Applying InputClass "evdev keyboard catchall"
[ 5.271] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed Keyboard'
[ 5.271] (**) Razer Razer DeathAdder V2 X HyperSpeed Keyboard:
always reports core events
[ 5.271] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Keyboard: Device: "/dev/input/event5"
[ 5.271] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Keyboard: Vendor 0x1532 Product 0x9c
[ 5.271] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Keyboard: Found keys
[ 5.271] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Keyboard: Configuring as keyboard
[ 5.271] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:009C.0002/input/input5/event5"
[ 5.271] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed Keyboard" (type: KEYBOARD, id 11)
[ 5.271] (**) Option "xkb_rules" "evdev"
[ 5.272] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed Mouse (/dev/input/event6)
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Applying InputClass "evdev pointer catchall"
[ 5.272] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed Mouse'
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse: always
reports core events
[ 5.272] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Device: "/dev/input/event6"
[ 5.272] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Vendor 0x1532 Product 0x9c
[ 5.272] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Found 10 mouse buttons
[ 5.272] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Found scroll wheel(s)
[ 5.272] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Found relative axes
[ 5.272] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Found x and y relative axes
[ 5.272] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Configuring as mouse
[ 5.272] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
Adding scrollwheel support
[ 5.272] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
YAxisMapping: buttons 4 and 5
[ 5.272] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout:
200
[ 5.272] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:009C.0002/input/input6/event6"
[ 5.272] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed Mouse" (type: MOUSE, id 12)
[ 5.272] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed Mouse:
initialized for relative axes.
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse:
(accel) keeping acceleration scheme 1
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse:
(accel) acceleration profile 0
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse:
(accel) acceleration factor: 2.000
[ 5.272] (**) Razer Razer DeathAdder V2 X HyperSpeed Mouse:
(accel) acceleration threshold: 4
[ 5.273] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control (/dev/input/event7)
[ 5.273] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: Applying InputClass "evdev keyboard catchall"
[ 5.273] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control'
[ 5.273] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: always reports core events
[ 5.273] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Device: "/dev/input/event7"
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Vendor 0x1532 Product 0x9c
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found 1 mouse buttons
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found scroll wheel(s)
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found relative axes
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Forcing relative x/y axes to exist.
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found absolute axes
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Forcing absolute x/y axes to exist.
[ 5.273] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found keys
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Configuring as mouse
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Configuring as keyboard
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Adding scrollwheel support
[ 5.273] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: YAxisMapping: buttons 4 and 5
[ 5.273] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
[ 5.273] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:009C.0002/input/input7/event7"
[ 5.273] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control" (type: KEYBOARD, id 13)
[ 5.273] (**) Option "xkb_rules" "evdev"
[ 5.273] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: initialized for relative axes.
[ 5.273] (WW) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: ignoring absolute axes.
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: (accel) keeping acceleration scheme 1
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: (accel) acceleration profile 0
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: (accel) acceleration factor: 2.000
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: (accel) acceleration threshold: 4
[ 5.274] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed System Control (/dev/input/event8)
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed System
Control: Applying InputClass "evdev keyboard catchall"
[ 5.274] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed System Control'
[ 5.274] (**) Razer Razer DeathAdder V2 X HyperSpeed System
Control: always reports core events
[ 5.274] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed System
Control: Device: "/dev/input/event8"
[ 5.274] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed System
Control: Vendor 0x1532 Product 0x9c
[ 5.274] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed System
Control: Found keys
[ 5.274] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed System
Control: Configuring as keyboard
[ 5.274] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:1532:009C.0002/input/input8/event8"
[ 5.274] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed System Control" (type: KEYBOARD, id 14)
[ 5.274] (**) Option "xkb_rules" "evdev"
[ 5.275] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed (/dev/input/event9)
[ 5.275] (II) No input driver specified, ignoring this device.
[ 5.275] (II) This device may have been added with another device file.
[ 5.276] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed (/dev/input/event10)
[ 5.276] (**) Razer Razer DeathAdder V2 X HyperSpeed: Applying
InputClass "evdev keyboard catchall"
[ 5.276] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed'
[ 5.276] (**) Razer Razer DeathAdder V2 X HyperSpeed: always
reports core events
[ 5.276] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Device: "/dev/input/event10"
[ 5.276] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Vendor 0x1532 Product 0x9c
[ 5.276] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed: Found keys
[ 5.276] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed:
Configuring as keyboard
[ 5.276] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:1532:009C.0003/input/input10/event10"
[ 5.276] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed" (type: KEYBOARD, id 15)
[ 5.276] (**) Option "xkb_rules" "evdev"
[ 5.277] (II) config/udev: Adding input device Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control (/dev/input/event11)
[ 5.277] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: Applying InputClass "evdev keyboard catchall"
[ 5.277] (II) Using input driver 'evdev' for 'Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control'
[ 5.277] (**) Razer Razer DeathAdder V2 X HyperSpeed Consumer
Control: always reports core events
[ 5.277] (**) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Device: "/dev/input/event11"
[ 5.277] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Vendor 0x1532 Product 0x9c
[ 5.277] (--) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Found keys
[ 5.277] (II) evdev: Razer Razer DeathAdder V2 X HyperSpeed
Consumer Control: Configuring as keyboard
[ 5.278] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.3/0003:1532:009C.0005/input/input11/event11"
[ 5.278] (II) XINPUT: Adding extended input device "Razer Razer
DeathAdder V2 X HyperSpeed Consumer Control" (type: KEYBOARD, id 16)
[ 5.278] (**) Option "xkb_rules" "evdev"
[ 5.279] (II) config/udev: Adding input device Logitech USB
Keyboard (/dev/input/event12)
[ 5.279] (**) Logitech USB Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 5.279] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 5.279] (**) Logitech USB Keyboard: always reports core events
[ 5.279] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event12"
[ 5.279] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 5.279] (--) evdev: Logitech USB Keyboard: Found keys
[ 5.279] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 5.279] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb3/3-2/3-2:1.0/0003:046D:C31C.0006/input/input12/event12"
[ 5.279] (II) XINPUT: Adding extended input device "Logitech USB
Keyboard" (type: KEYBOARD, id 17)
[ 5.279] (**) Option "xkb_rules" "evdev"
[ 5.280] (II) config/udev: Adding input device Logitech USB
Keyboard (/dev/input/event13)
[ 5.280] (**) Logitech USB Keyboard: Applying InputClass "evdev
keyboard catchall"
[ 5.280] (II) Using input driver 'evdev' for 'Logitech USB Keyboard'
[ 5.280] (**) Logitech USB Keyboard: always reports core events
[ 5.280] (**) evdev: Logitech USB Keyboard: Device: "/dev/input/event13"
[ 5.280] (--) evdev: Logitech USB Keyboard: Vendor 0x46d Product 0xc31c
[ 5.280] (--) evdev: Logitech USB Keyboard: Found 1 mouse buttons
[ 5.280] (--) evdev: Logitech USB Keyboard: Found scroll wheel(s)
[ 5.280] (--) evdev: Logitech USB Keyboard: Found relative axes
[ 5.280] (II) evdev: Logitech USB Keyboard: Forcing relative x/y
axes to exist.
[ 5.280] (--) evdev: Logitech USB Keyboard: Found absolute axes
[ 5.280] (II) evdev: Logitech USB Keyboard: Forcing absolute x/y
axes to exist.
[ 5.280] (--) evdev: Logitech USB Keyboard: Found keys
[ 5.280] (II) evdev: Logitech USB Keyboard: Configuring as mouse
[ 5.280] (II) evdev: Logitech USB Keyboard: Configuring as keyboard
[ 5.280] (II) evdev: Logitech USB Keyboard: Adding scrollwheel support
[ 5.280] (**) evdev: Logitech USB Keyboard: YAxisMapping: buttons 4 and 5
[ 5.280] (**) evdev: Logitech USB Keyboard: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.280] (**) Option "config_info"
"udev:/sys/devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb3/3-2/3-2:1.1/0003:046D:C31C.0007/input/input13/event13"
[ 5.280] (II) XINPUT: Adding extended input device "Logitech USB
Keyboard" (type: KEYBOARD, id 18)
[ 5.280] (**) Option "xkb_rules" "evdev"
[ 5.281] (II) evdev: Logitech USB Keyboard: initialized for relative axes.
[ 5.281] (WW) evdev: Logitech USB Keyboard: ignoring absolute axes.
[ 5.281] (**) Logitech USB Keyboard: (accel) keeping acceleration scheme 1
[ 5.281] (**) Logitech USB Keyboard: (accel) acceleration profile 0
[ 5.281] (**) Logitech USB Keyboard: (accel) acceleration factor: 2.000
[ 5.281] (**) Logitech USB Keyboard: (accel) acceleration threshold: 4
[ 7.160] (II) intel(0): EDID vendor "GSM", prod id 23353
[ 7.160] (II) intel(0): Using EDID range info for horizontal sync
[ 7.160] (II) intel(0): Using EDID range info for vertical refresh
[ 7.160] (II) intel(0): Printing DDC gathered Modelines:
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920
2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 185.60 1920
2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (84.4 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 325.08 1920
1944 1976 2056 1080 1083 1088 1098 +hsync +vsync (158.1 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 285.50 1920
1968 2000 2080 1080 1083 1088 1144 +hsync +vsync (137.3 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 235.50 1920
1968 2000 2080 1080 1083 1088 1133 -hsync -vsync (113.2 kHz e)
[ 7.160] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656
752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 7.160] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736
798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 7.160] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390
1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 7.160] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732
796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 7.160] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720
1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920
2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 297.00 1920
2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (135.0 kHz e)
[ 7.160] (II) intel(0): Modeline "1920x1080"x0.0 297.00 1920
2448 2492 2640 1080 1084 1094 1125 +hsync +vsync (112.5 kHz e)
[ 7.160] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840
968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 7.160] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656
720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 7.160] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738
846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 7.160] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 7.160] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040
1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 7.160] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048
1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 7.160] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816
896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 7.160] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216
1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 7.160] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680
744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 7.160] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848
936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 7.161] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848
880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 7.161] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072
1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 7.161] (II) intel(0): Modeline "1280x960"x100.0 178.99 1280
1376 1520 1760 960 961 964 1017 -hsync +vsync (101.7 kHz e)
[ 7.161] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 7.161] (II) intel(0): Modeline "1280x1024"x0.0 187.25 1280
1328 1360 1440 1024 1027 1034 1084 +hsync -vsync (130.0 kHz e)
[ 7.161] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488
1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
-------------------------------------------------------------------------------------------------------------------
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [Buildroot] buildroot 2021.02.1: black screen after Xorg launched
2023-10-13 21:09 [Buildroot] buildroot 2021.02.1: black screen after Xorg launched Zvi Vered
@ 2023-10-13 21:29 ` Peter Korsgaard
2023-10-13 21:43 ` Zvi Vered
0 siblings, 1 reply; 3+ messages in thread
From: Peter Korsgaard @ 2023-10-13 21:29 UTC (permalink / raw)
To: Zvi Vered; +Cc: buildroot
>>>>> "Zvi" == Zvi Vered <veredz72@gmail.com> writes:
> Hello,
> Using buildroot 2021.02.1 for x64 I built root file system that contain Xorg.
> Right after Xorg is launched I got black screen.
2021.02.1 is a release from almost 3 years ago, which has been end of
life since April 2022. Please use a supported version (E.G. 2023.02.x or
2023.08.x).
> According to Xorg.0.0.log (attached) there is no error.
> I tried to run: xeyes and got:
> Can't open display
Does it work if you set the DISPLAY environment variable?
export DISPLAY=:0
--
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Buildroot] buildroot 2021.02.1: black screen after Xorg launched
2023-10-13 21:29 ` Peter Korsgaard
@ 2023-10-13 21:43 ` Zvi Vered
0 siblings, 0 replies; 3+ messages in thread
From: Zvi Vered @ 2023-10-13 21:43 UTC (permalink / raw)
To: Peter Korsgaard; +Cc: buildroot
Hi Peter,
I ran:
export DISPLAY=:0
and then, xeyes works !
Does it make sense to insert this export in rootfs.tar created by buildroot ?
Thank you very much.
Zvika
On Sat, Oct 14, 2023 at 12:30 AM Peter Korsgaard <peter@korsgaard.com> wrote:
>
> >>>>> "Zvi" == Zvi Vered <veredz72@gmail.com> writes:
>
> > Hello,
> > Using buildroot 2021.02.1 for x64 I built root file system that contain Xorg.
> > Right after Xorg is launched I got black screen.
>
> 2021.02.1 is a release from almost 3 years ago, which has been end of
> life since April 2022. Please use a supported version (E.G. 2023.02.x or
> 2023.08.x).
>
> > According to Xorg.0.0.log (attached) there is no error.
> > I tried to run: xeyes and got:
> > Can't open display
>
> Does it work if you set the DISPLAY environment variable?
>
> export DISPLAY=:0
>
> --
> Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-10-13 21:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-10-13 21:09 [Buildroot] buildroot 2021.02.1: black screen after Xorg launched Zvi Vered
2023-10-13 21:29 ` Peter Korsgaard
2023-10-13 21:43 ` Zvi Vered
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox