* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-24 12:46 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-24 12:46 UTC (permalink / raw)
To: buildroot
The following issue has been SUBMITTED.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-24-2008 05:46 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-24 13:55 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-24 13:55 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-24-2008 06:55 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-24 17:35 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-24 17:35 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-24-2008 10:35 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 9:05 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 9:05 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 02:05 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 9:35 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 9:35 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 02:35 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 10:28 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 10:28 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 03:28 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 10:38 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 10:38 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 03:38 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:38
----------------------------------------------------------------------
(tpetazzoni)
I thingd is that I changed the destination directory of the toolchain and
the kernel header to "/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s
not anymore inside "build_<ARCH>/staging_dir/",
maybe it's 1 party of the problem.
so my libjpeg. la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 15:53 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 15:53 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 08:53 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-28 23:03 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-28 23:03 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-28-2008 16:03 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-29 7:22 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-29 7:22 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-29-2008 00:22 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
----------------------------------------------------------------------
sylvain - 10-29-08 00:22
----------------------------------------------------------------------
>Hm, strange. Will try to reproduce it here to see what goes wrong.
>BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
>Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during
a
>training ?
Yes I meet Michael 2 weeks ago. It was a really interresting training !!!
How did you guess that ???
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
10-28-08 16:03 tpetazzoni File Added: ldflags-fix-from-daniel
10-29-08 00:22 sylvain Note Added: 0014524
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-29 7:26 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-29 7:26 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-29-2008 00:26 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
----------------------------------------------------------------------
sylvain - 10-29-08 00:26
----------------------------------------------------------------------
>Ok, I tried to reproduce your issue without any of the patches I currently
have >on Buildroot (with my patches, I'm not able to reproduce). However,
without my >patches, I face the following problem during libtiff
./configure:
>checking for inflateEnd in -lz... no
>configure: error: Zlib library not found at
>/home/thomas/local/buildroot/build_arm/staging_dir/lib
>Could you try with the patch I'll attach to this bug ?
Yes I gonna try.
I have to duplicate my buildroot folder before, I post when I finish.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
10-28-08 16:03 tpetazzoni File Added: ldflags-fix-from-daniel
10-29-08 00:22 sylvain Note Added: 0014524
10-29-08 00:22 sylvain Note Deleted: 0014524
10-29-08 00:26 sylvain Note Added: 0014534
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-29 9:00 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-29 9:00 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-29-2008 02:00 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
----------------------------------------------------------------------
sylvain - 10-29-08 00:26
----------------------------------------------------------------------
>Ok, I tried to reproduce your issue without any of the patches I currently
have >on Buildroot (with my patches, I'm not able to reproduce). However,
without my >patches, I face the following problem during libtiff
./configure:
>checking for inflateEnd in -lz... no
>configure: error: Zlib library not found at
>/home/thomas/local/buildroot/build_arm/staging_dir/lib
>Could you try with the patch I'll attach to this bug ?
Yes I gonna try.
I have to duplicate my buildroot folder before, I post when I finish.
----------------------------------------------------------------------
sylvain - 10-29-08 02:00
----------------------------------------------------------------------
Ok I try the patch and it correct my bug !!!
WARNING : don t forget to declare in your PATH "STAGING_DIR/usr/bin"
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
10-28-08 16:03 tpetazzoni File Added: ldflags-fix-from-daniel
10-29-08 00:22 sylvain Note Added: 0014524
10-29-08 00:22 sylvain Note Deleted: 0014524
10-29-08 00:26 sylvain Note Added: 0014534
10-29-08 02:00 sylvain Note Added: 0014544
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-29 11:09 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-29 11:09 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-29-2008 04:09 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
----------------------------------------------------------------------
sylvain - 10-29-08 00:26
----------------------------------------------------------------------
>Ok, I tried to reproduce your issue without any of the patches I currently
have >on Buildroot (with my patches, I'm not able to reproduce). However,
without my >patches, I face the following problem during libtiff
./configure:
>checking for inflateEnd in -lz... no
>configure: error: Zlib library not found at
>/home/thomas/local/buildroot/build_arm/staging_dir/lib
>Could you try with the patch I'll attach to this bug ?
Yes I gonna try.
I have to duplicate my buildroot folder before, I post when I finish.
----------------------------------------------------------------------
sylvain - 10-29-08 02:00
----------------------------------------------------------------------
Ok I tried the patch and it correct my bug !!!
Thanks a lot.
WARNING : don t forget to declare in your PATH "STAGING_DIR/usr/bin"
----------------------------------------------------------------------
tpetazzoni - 10-29-08 04:09
----------------------------------------------------------------------
Hum, interesting. I'm not sure why the patch I provided fixes the bug.
However, you mention that you must add $(STAGING_DIR)/usr/bin to your
PATH. What fails if you don't do that ?
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
10-28-08 16:03 tpetazzoni File Added: ldflags-fix-from-daniel
10-29-08 00:22 sylvain Note Added: 0014524
10-29-08 00:22 sylvain Note Deleted: 0014524
10-29-08 00:26 sylvain Note Added: 0014534
10-29-08 02:00 sylvain Note Added: 0014544
10-29-08 02:00 sylvain Note Edited: 0014544
10-29-08 04:09 tpetazzoni Note Added: 0014554
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
* [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath
@ 2008-10-29 14:11 bugs at busybox.net
0 siblings, 0 replies; 14+ messages in thread
From: bugs at busybox.net @ 2008-10-29 14:11 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=5714
======================================================================
Reported By: sylvain
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 5714
Category: Architecture Specific
Reproducibility: always
Severity: block
Priority: normal
Status: assigned
======================================================================
Date Submitted: 10-24-2008 05:46 PDT
Last Modified: 10-29-2008 07:11 PDT
======================================================================
Summary: bug with jamvm + concierge + classpath
Description:
I work on arm9.
I try with the tarball of 22/09/2008
When I compil busyboc + classpath + jamvm + concierge I get something like
:
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -g -O2 -Wall -W -o
mkg3states mkg3states.o -L/home/sylvain/FSEmbarque/maChaineDeCompil/lib
../port/.libs/libport.a /usr/lib/libjpeg.so -lz -lm -lc
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [mkg3states] Erreur 1
make[3]: *** Attente des t?ches non termin?es....
libtool: link:
/home/sylvain/FSEmbarque/maChaineDeCompil/usr/bin/arm-linux-uclibc-gcc -Os
-I/home/sylvain/FSEmbarque/maChaineDeCompil/usr/include
-I/home/sylvain/FSEmbarque/maChaineDeCompil/include
--sysroot=/home/sylvain/FSEmbarque/maChaineDeCompil/ -isysroot
/home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float -shared
.libs/tif_aux.o .libs/tif_close.o .libs/tif_codec.o .libs/tif_color.o
.libs/tif_compress.o .libs/tif_dir.o .libs/tif_dirinfo.o
.libs/tif_dirread.o .libs/tif_dirwrite.o .libs/tif_dumpmode.o
.libs/tif_error.o .libs/tif_extension.o .libs/tif_fax3.o
.libs/tif_fax3sm.o .libs/tif_flush.o .libs/tif_getimage.o .libs/tif_jpeg.o
.libs/tif_luv.o .libs/tif_lzw.o .libs/tif_next.o .libs/tif_ojpeg.o
.libs/tif_open.o .libs/tif_packbits.o .libs/tif_pixarlog.o
.libs/tif_predict.o .libs/tif_print.o .libs/tif_read.o .libs/tif_strip.o
.libs/tif_swab.o .libs/tif_thunder.o .libs/tif_tile.o .libs/tif_unix.o
.libs/tif_version.o .libs/tif_warning.o .libs/tif_write.o .libs/tif_zip.o
-Wl,--whole-archive ../port/.libs/libport.a -Wl,--no-whole-archive
-L/home/sylvain/FSEmbarque/maChaineDeCompil/lib /usr/lib/libjpeg.so -lz
-lm -lc -isysroot /home/sylvain/FSEmbarque/maChaineDeCompil -msoft-float
-Wl,-soname -Wl,libtiff.so.3 -o .libs/libtiff.so.3.8.2
/usr/lib/libjpeg.so: could not read symbols: File in wrong format
collect2: ld returned 1 exit status
make[3]: *** [libtiff.la] Erreur 1
make[3]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[2]: *** [all] Erreur 2
make[2]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2/libtiff
?
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le r?pertoire ?
/home/sylvain/FSEmbarque/buildroot-20081024/build_arm/tiff-3.8.2 ?
======================================================================
----------------------------------------------------------------------
tpetazzoni - 10-24-08 06:55
----------------------------------------------------------------------
The problem at the beginning is that it tries to link with the host libjpeg
instead of the target libjpeg. Not sure why, though, and I don't really get
why setting TARGET_DIR would solve the problem.
----------------------------------------------------------------------
Correa - 10-24-08 10:35
----------------------------------------------------------------------
It did build ok for me using avr32 as target.
I'm using latest svn (r23778 at the moment).
Try updating. There were changes in the Makefile.autotools.in that might
affect your build.
----------------------------------------------------------------------
sylvain - 10-28-08 02:05
----------------------------------------------------------------------
Thanks for the help.
tpetazzoni you are right to modify the TARGET_DIR do not resolve the
problem permanently, I was just lucky and I don t know why..
(Correa) I tried to update my release, unfortunatly I have the same
bug...
I should have a a difference with your linux settings... That's stuff are
not really easy to solve...
I did other investigations to understand the problem.
In fact, when I compile classpath, it compiles its dependences : libjpeg,
libtiff, etc....
And inside tiff's makefile LIBTOOL try to resolve the dynamics shared
libraries and it resolve -ljpeg by /usr/lib/libjpeg.so instead of
<mycrosscompilToolchain>/usr/bin/libjpeg.so ...
I try to understand libtool and resolve the problem but the libtool script
are more or less a nightmare to understand.
If you have some idea you are really welcome :-))
----------------------------------------------------------------------
tpetazzoni - 10-28-08 02:35
----------------------------------------------------------------------
After the failure, what's the contents of
build_<ARCH>/staging_dir/usr/lib/libjpeg.la ?
----------------------------------------------------------------------
sylvain - 10-28-08 03:28
----------------------------------------------------------------------
I found a hack to correct my problem it's quite "dirty" but this time I can
reproduce it.
libtool when it tries to resolve the compile flag "-ljpeg" (it's use by
tiff/port, tiff/tool, tiff/libtiff) looks inside the /usr/lib/libjpeg.la
the install directory of the jpeg library which is "/usr/lib/".
so it translate "-ljpeg" -> /usr/lib/libjpeg.so...
If I change the last line of the file :
# Directory that this library needs to be installed in:
# libdir='/usr/lib'
libdir='<path to your cross-compile toolchain>/usr/lib'
the full compilation is alright and my embedded jvm and osgi works
sucessfully !!!
Now I need to understand which buildroot compilation variable I have to
change for libtool in order to set the correct libraries path.
----------------------------------------------------------------------
sylvain - 10-28-08 03:41
----------------------------------------------------------------------
(tpetazzoni)
I came back to my old settings with the correct path inside
/usr/lib/libjpeg.la and I reproduce the bug.
1 thing (maybe important to resolve the bug) is that I changed the
destination directory of the toolchain and the kernel header to
"/home/sylvain/FSEmbarque/maChaineDeCompil2/". It s not anymore inside
"build_<ARCH>/staging_dir/".
so my libjpeg.la contains :
# libjpeg.la - a libtool library file
# Generated by ltmain.sh - GNU libtool 1.2
# The name that we can dlopen(3).
dlname=''
# Names of this library.
library_names='libjpeg.so.62.0.0 libjpeg.so.62 libjpeg.so'
# The name of the static archive.
old_library='libjpeg.a'
# Libraries that this one depends upon.
dependency_libs=''
# Version information for libjpeg.
current=62
age=0
revision=0
# Directory that this library needs to be installed in:
libdir='/home/sylvain/FSEmbarque/maChaineDeCompil2/usr/lib'
It looks correct...
thanks for the help.
----------------------------------------------------------------------
tpetazzoni - 10-28-08 08:53
----------------------------------------------------------------------
Hm, strange. Will try to reproduce it here to see what goes wrong.
BTW, my name is Thomas Petazzoni, and I'm the colleague of Michael
Opdenacker, at Free-Electrons. Didn't you meet him two weeks ago during a
training ?
----------------------------------------------------------------------
tpetazzoni - 10-28-08 16:03
----------------------------------------------------------------------
Ok, I tried to reproduce your issue without any of the patches I currently
have on Buildroot (with my patches, I'm not able to reproduce). However,
without my patches, I face the following problem during libtiff
./configure:
checking for inflateEnd in -lz... no
configure: error: Zlib library not found at
/home/thomas/local/buildroot/build_arm/staging_dir/lib
Could you try with the patch I'll attach to this bug ?
----------------------------------------------------------------------
sylvain - 10-29-08 00:26
----------------------------------------------------------------------
>Ok, I tried to reproduce your issue without any of the patches I currently
have >on Buildroot (with my patches, I'm not able to reproduce). However,
without my >patches, I face the following problem during libtiff
./configure:
>checking for inflateEnd in -lz... no
>configure: error: Zlib library not found at
>/home/thomas/local/buildroot/build_arm/staging_dir/lib
>Could you try with the patch I'll attach to this bug ?
Yes I gonna try.
I have to duplicate my buildroot folder before, I post when I finish.
----------------------------------------------------------------------
sylvain - 10-29-08 02:00
----------------------------------------------------------------------
Ok I tried the patch and it correct my bug !!!
Thanks a lot.
WARNING : don t forget to declare in your PATH "STAGING_DIR/usr/bin"
----------------------------------------------------------------------
tpetazzoni - 10-29-08 04:09
----------------------------------------------------------------------
Hum, interesting. I'm not sure why the patch I provided fixes the bug.
However, you mention that you must add $(STAGING_DIR)/usr/bin to your
PATH. What fails if you don't do that ?
----------------------------------------------------------------------
sylvain - 10-29-08 07:11
----------------------------------------------------------------------
>Hum, interesting. I'm not sure why the patch I provided fixes the bug.
for sure now I can compil busybox +classpath + jamvm + concierge without
any problems when I apply the patch...
>However, you mention that you must add $(STAGING_DIR)/usr/bin to your
PATH.
>What fails if you don't do that ?
You can forget this remark. I was not really awake when I write this... I
did a mistake this morning... You don't need to add the PATH of you
cross-compiler in your environments.
Anyway I try several times with the patch, with or without the PATH,
without modify the /usr/lib/libjpeg.la, and I get a full files system for
ma board, with operational OSGI.
Issue History
Date Modified Username Field Change
======================================================================
10-24-08 05:46 sylvain New Issue
10-24-08 05:46 sylvain Status new => assigned
10-24-08 05:46 sylvain Assigned To => buildroot
10-24-08 05:49 sylvain Issue Monitored: sylvain
10-24-08 05:50 sylvain Issue End Monitor: sylvain
10-24-08 06:55 tpetazzoni Note Added: 0014104
10-24-08 10:35 Correa Note Added: 0014114
10-28-08 02:05 sylvain Note Added: 0014414
10-28-08 02:35 tpetazzoni Note Added: 0014444
10-28-08 03:28 sylvain Note Added: 0014464
10-28-08 03:38 sylvain Note Added: 0014474
10-28-08 03:39 sylvain Note Edited: 0014474
10-28-08 03:40 sylvain Note Edited: 0014474
10-28-08 03:41 sylvain Note Edited: 0014474
10-28-08 08:53 tpetazzoni Note Added: 0014484
10-28-08 16:03 tpetazzoni Note Added: 0014504
10-28-08 16:03 tpetazzoni File Added: ldflags-fix-from-daniel
10-29-08 00:22 sylvain Note Added: 0014524
10-29-08 00:22 sylvain Note Deleted: 0014524
10-29-08 00:26 sylvain Note Added: 0014534
10-29-08 02:00 sylvain Note Added: 0014544
10-29-08 02:00 sylvain Note Edited: 0014544
10-29-08 04:09 tpetazzoni Note Added: 0014554
10-29-08 07:11 sylvain Note Added: 0014574
======================================================================
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2008-10-29 14:11 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-24 12:46 [Buildroot] [buildroot 0005714]: bug with jamvm + concierge + classpath bugs at busybox.net
-- strict thread matches above, loose matches on Subject: below --
2008-10-24 13:55 bugs at busybox.net
2008-10-24 17:35 bugs at busybox.net
2008-10-28 9:05 bugs at busybox.net
2008-10-28 9:35 bugs at busybox.net
2008-10-28 10:28 bugs at busybox.net
2008-10-28 10:38 bugs at busybox.net
2008-10-28 15:53 bugs at busybox.net
2008-10-28 23:03 bugs at busybox.net
2008-10-29 7:22 bugs at busybox.net
2008-10-29 7:26 bugs at busybox.net
2008-10-29 9:00 bugs at busybox.net
2008-10-29 11:09 bugs at busybox.net
2008-10-29 14:11 bugs at busybox.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox