[Buildroot] [PATCH] configs/solidrun_macchiatobin_defconfig: include for Singleshot DTS

[Sergey Matyukevich <geomatsi@gmail.com>]

Hello Vadym,

> > > Single- & Double shot boards have many in common except additional
> > > RJ45 tranceivers near by each of 10G SFP and a bit different CPU freq.
> > > 
> > > Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
> > > ---
> > >  configs/solidrun_macchiatobin_defconfig | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > 
> > > diff --git a/configs/solidrun_macchiatobin_defconfig b/configs/solidrun_macchiatobin_defconfig
> > > index 7d06313b03db..34094a833b66 100644
> > > --- a/configs/solidrun_macchiatobin_defconfig
> > > +++ b/configs/solidrun_macchiatobin_defconfig
> > > @@ -30,7 +30,7 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION=y
> > >  BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.10.5"
> > >  BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
> > >  BR2_LINUX_KERNEL_DTS_SUPPORT=y
> > > -BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin"
> > > +BR2_LINUX_KERNEL_INTREE_DTS_NAME="marvell/armada-8040-mcbin marvell/armada-8040-mcbin-singleshot"
> > >  BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/solidrun/macchiatobin/linux-extras.config"
> > >  BR2_LINUX_KERNEL_INSTALL_TARGET=y
> > >  BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> > 
> > I do not have access to MacchiatoBin hardware anymore, but I have been using
> > current defconfig with DoubleShot boards. If this defconfig does not work
> > well for SingleShot boards, then it makes sense to add a separate defconfig
> > for such boards rather then remove DoubleShot support completely. Probably
> > linux-extras.config in board/solidrun/macchiatobin worth another look to
> > make sure that features for both boards are included.
> > 
> > Regards,
> > Sergey
> 
> If comparing Single- and DoubleShot Linux DTS files they have difference
> only in SFP config and +1 heartbeat LED. Do you think it is worth to duplicate
> current defconfig for SingleShot board even if SFP will not work by
> using DualShot DTS instead of just append _INTREE_DTS_NAME with
> -singleshot version ?

I think any option will do if it does not break existing use-cases.
Could you please confirm that DoubleShot image does not work
properly on SingleShot board ?

BTW, I thought that support for autodetect of copper vs fiber with
some prioritization has been already implemented in Linux for
mcbin hardware. Do you know if this is true or not ?

Regards,
Sergey