Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [Buildroot] [PATCH 1/7] configs/s6lx9_microboard_defconfig: remove defconfig
@ 2026-06-06 22:51 Romain Naour via buildroot
  2026-06-06 22:51 ` [Buildroot] [PATCH 2/7] configs/ts4900_defconfig: " Romain Naour via buildroot
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Romain Naour via buildroot @ 2026-06-06 22:51 UTC (permalink / raw)
  To: buildroot; +Cc: Romain Naour

This configuration for the s6lx9 microboard was added back in March 2012
(commit 49084a198247575650c155b6f5f147fb034becc5), and has not been
updated in any significant way since then.

This defconfig still use a 4.4.7 (no longer maintained) and out of tree
devicetree (lx9_mmu.dts).

Remove its support.

Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/14728914045 (s6lx9_microboard_defconfig)

Signed-off-by: Romain Naour <romain.naour@smile.fr>
---
 .checkpackageignore                           |   1 -
 DEVELOPERS                                    |   4 -
 board/avnet/s6lx9_microboard/lx9_mmu.dts      | 247 ------------------
 .../avnet/s6lx9_microboard/lx9_mmu_defconfig  |  68 -----
 board/avnet/s6lx9_microboard/readme.txt       |  70 -----
 configs/s6lx9_microboard_defconfig            |  11 -
 6 files changed, 401 deletions(-)
 delete mode 100644 board/avnet/s6lx9_microboard/lx9_mmu.dts
 delete mode 100644 board/avnet/s6lx9_microboard/lx9_mmu_defconfig
 delete mode 100644 board/avnet/s6lx9_microboard/readme.txt
 delete mode 100644 configs/s6lx9_microboard_defconfig

diff --git a/.checkpackageignore b/.checkpackageignore
index b4e7919c07..7a92eda7cf 100644
--- a/.checkpackageignore
+++ b/.checkpackageignore
@@ -132,7 +132,6 @@ configs/orangepi_pc2_defconfig lib_defconfig.ForceCheckHash
 configs/orangepi_zero_plus_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_defconfig lib_defconfig.ForceCheckHash
 configs/pine64_pinecube_defconfig lib_defconfig.ForceCheckHash
-configs/s6lx9_microboard_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_lichee_rv_dock_defconfig lib_defconfig.ForceCheckHash
 configs/sipeed_licheepi_nano_defconfig lib_defconfig.ForceCheckHash
diff --git a/DEVELOPERS b/DEVELOPERS
index 9aaffa29a9..7c5917d1e8 100644
--- a/DEVELOPERS
+++ b/DEVELOPERS
@@ -2763,10 +2763,6 @@ F:	package/synergy/
 N:	Qais Yousef <qais.yousef@arm.com>
 F:	package/bpftrace/
 
-N:	Rafal Susz <rafal.susz@gmail.com>
-F:	board/avnet/s6lx9_microboard/
-F:	configs/s6lx9_microboard_defconfig
-
 N:	Rafał Miłecki <rafal@milecki.pl>
 F:	board/broadcom/northstar/
 F:	configs/broadcom_northstar_defconfig
diff --git a/board/avnet/s6lx9_microboard/lx9_mmu.dts b/board/avnet/s6lx9_microboard/lx9_mmu.dts
deleted file mode 100644
index 8ffedd9feb..0000000000
--- a/board/avnet/s6lx9_microboard/lx9_mmu.dts
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Device Tree Generator version: 1.3
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 13.2 EDK_O.61xd
- *
- * XPS project directory: device-tree_bsp_230-orig
- */
-
-/dts-v1/;
-/ {
-    #address-cells = <1>;
-    #size-cells = <1>;
-    compatible = "xlnx,microblaze";
-    model = "testing";
-    MCB3_LPDDR: memory@80000000 {
-        device_type = "memory";
-        reg = < 0x80000000 0x4000000 >;
-    } ;
-    aliases {
-        ethernet0 = &Ethernet_MAC;
-        serial0 = &USB_Uart;
-    } ;
-    chosen {
-        bootargs = "console=ttyUL0";
-        linux,stdout-path = "/axi@0/serial@40600000";
-    } ;
-    cpus {
-        #address-cells = <1>;
-        #cpus = <0x1>;
-        #size-cells = <0>;
-        microblaze_0: cpu@0 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,microblaze-8.20.a";
-            d-cache-baseaddr = <0x80000000>;
-            d-cache-highaddr = <0x83ffffff>;
-            d-cache-line-size = <0x10>;
-            d-cache-size = <0x2000>;
-            device_type = "cpu";
-            i-cache-baseaddr = <0x80000000>;
-            i-cache-highaddr = <0x83ffffff>;
-            i-cache-line-size = <0x10>;
-            i-cache-size = <0x2000>;
-            model = "microblaze,8.20.a";
-            reg = <0>;
-            timebase-frequency = <66666667>;
-            xlnx,addr-tag-bits = <0xd>;
-            xlnx,allow-dcache-wr = <0x1>;
-            xlnx,allow-icache-wr = <0x1>;
-            xlnx,area-optimized = <0x0>;
-            xlnx,avoid-primitives = <0x0>;
-            xlnx,branch-target-cache-size = <0x0>;
-            xlnx,cache-byte-size = <0x2000>;
-            xlnx,d-axi = <0x1>;
-            xlnx,d-lmb = <0x1>;
-            xlnx,d-plb = <0x0>;
-            xlnx,data-size = <0x20>;
-            xlnx,dcache-addr-tag = <0xd>;
-            xlnx,dcache-always-used = <0x1>;
-            xlnx,dcache-byte-size = <0x2000>;
-            xlnx,dcache-data-width = <0x0>;
-            xlnx,dcache-force-tag-lutram = <0x0>;
-            xlnx,dcache-interface = <0x0>;
-            xlnx,dcache-line-len = <0x4>;
-            xlnx,dcache-use-fsl = <0x0>;
-            xlnx,dcache-use-writeback = <0x0>;
-            xlnx,dcache-victims = <0x0>;
-            xlnx,debug-enabled = <0x1>;
-            xlnx,div-zero-exception = <0x0>;
-            xlnx,dynamic-bus-sizing = <0x1>;
-            xlnx,ecc-use-ce-exception = <0x0>;
-            xlnx,edge-is-positive = <0x1>;
-            xlnx,endianness = <0x1>;
-            xlnx,family = "spartan6";
-            xlnx,fault-tolerant = <0x0>;
-            xlnx,fpu-exception = <0x0>;
-            xlnx,freq = <0x3f940ab>;
-            xlnx,fsl-data-size = <0x20>;
-            xlnx,fsl-exception = <0x0>;
-            xlnx,fsl-links = <0x0>;
-            xlnx,i-axi = <0x0>;
-            xlnx,i-lmb = <0x1>;
-            xlnx,i-plb = <0x0>;
-            xlnx,icache-always-used = <0x1>;
-            xlnx,icache-data-width = <0x0>;
-            xlnx,icache-force-tag-lutram = <0x0>;
-            xlnx,icache-interface = <0x0>;
-            xlnx,icache-line-len = <0x4>;
-            xlnx,icache-streams = <0x0>;
-            xlnx,icache-use-fsl = <0x0>;
-            xlnx,icache-victims = <0x0>;
-            xlnx,ill-opcode-exception = <0x0>;
-            xlnx,instance = "microblaze_0";
-            xlnx,interconnect = <0x2>;
-            xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
-            xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
-            xlnx,interconnect-m-axi-dc-w-register = <0x0>;
-            xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
-            xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
-            xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
-            xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
-            xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
-            xlnx,interrupt-is-edge = <0x0>;
-            xlnx,lockstep-slave = <0x0>;
-            xlnx,mmu-dtlb-size = <0x1>;
-            xlnx,mmu-itlb-size = <0x1>;
-            xlnx,mmu-privileged-instr = <0x0>;
-            xlnx,mmu-tlb-access = <0x3>;
-            xlnx,mmu-zones = <0x2>;
-            xlnx,number-of-pc-brk = <0x1>;
-            xlnx,number-of-rd-addr-brk = <0x0>;
-            xlnx,number-of-wr-addr-brk = <0x0>;
-            xlnx,opcode-0x0-illegal = <0x0>;
-            xlnx,optimization = <0x0>;
-            xlnx,pvr = <0x0>;
-            xlnx,pvr-user1 = <0x0>;
-            xlnx,pvr-user2 = <0x0>;
-            xlnx,reset-msr = <0x0>;
-            xlnx,sco = <0x0>;
-            xlnx,stream-interconnect = <0x0>;
-            xlnx,unaligned-exceptions = <0x0>;
-            xlnx,use-barrel = <0x1>;
-            xlnx,use-branch-target-cache = <0x0>;
-            xlnx,use-dcache = <0x1>;
-            xlnx,use-div = <0x0>;
-            xlnx,use-ext-brk = <0x1>;
-            xlnx,use-ext-nm-brk = <0x1>;
-            xlnx,use-extended-fsl-instr = <0x0>;
-            xlnx,use-fpu = <0x0>;
-            xlnx,use-hw-mul = <0x1>;
-            xlnx,use-icache = <0x1>;
-            xlnx,use-interrupt = <0x1>;
-            xlnx,use-mmu = <0x3>;
-            xlnx,use-msr-instr = <0x1>;
-            xlnx,use-pcmp-instr = <0x0>;
-            xlnx,use-stack-protection = <0x0>;
-        } ;
-    } ;
-    axi4lite_0: axi@0 {
-        #address-cells = <1>;
-        #size-cells = <1>;
-        compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
-        ranges ;
-        Ethernet_MAC: ethernet@40e00000 {
-            compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
-            device_type = "network";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 2 0 >;
-            local-mac-address = [ 00 0a 35 aa de 00 ];
-//            phy-handle = <&phy0>;
-            reg = < 0x40e00000 0x10000 >;
-            xlnx,duplex = <0x1>;
-            xlnx,family = "spartan6";
-            xlnx,include-global-buffers = <0x0>;
-            xlnx,include-internal-loopback = <0x0>;
-            xlnx,include-mdio = <0x1>;
-            xlnx,include-phy-constraints = <0x1>;
-            xlnx,interconnect-s-axi-read-acceptance = <0x1>;
-            xlnx,interconnect-s-axi-write-acceptance = <0x1>;
-            xlnx,rx-ping-pong = <0x0>;
-            xlnx,s-axi-aclk-period-ps = <0x3a98>;
-            xlnx,s-axi-id-width = <0x1>;
-            xlnx,s-axi-supports-narrow-burst = <0x0>;
-            xlnx,tx-ping-pong = <0x0>;
-/*
-            mdio {
-                #address-cells = <1>;
-                #size-cells = <0>;
-                phy0: phy@7 {
-                    compatible = "marvell,88e1111";
-                    device_type = "ethernet-phy";
-                    reg = <7>;
-                } ;
-            } ;
-*/
-        } ;
-        SPI_FLASH: spi@40a00000 {
-            compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 1 2 >;
-            reg = < 0x40a00000 0x10000 >;
-            xlnx,family = "spartan6";
-            xlnx,fifo-exist = <0x1>;
-            xlnx,num-ss-bits = <0x1>;
-            xlnx,num-transfer-bits = <0x8>;
-            xlnx,sck-ratio = <0x4>;
-        } ;
-        USB_Uart: serial@40600000 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
-            current-speed = <115200>;
-            device_type = "serial";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 3 0 >;
-            port-number = <0>;
-            reg = < 0x40600000 0x10000 >;
-            xlnx,baudrate = <0x1c200>;
-            xlnx,data-bits = <0x8>;
-            xlnx,family = "spartan6";
-            xlnx,odd-parity = <0x1>;
-            xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
-            xlnx,use-parity = <0x0>;
-        } ;
-        microblaze_0_intc: interrupt-controller@41200000 {
-            #interrupt-cells = <0x2>;
-            compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
-            interrupt-controller ;
-            reg = < 0x41200000 0x10000 >;
-            xlnx,kind-of-intr = <0xc>;
-            xlnx,num-intr-inputs = <0x4>;
-        } ;
-        system_timer: timer@41c00000 {
-            clock-frequency = <66666667>;
-            compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
-            interrupt-parent = <&microblaze_0_intc>;
-            interrupts = < 0 2 >;
-            reg = < 0x41c00000 0x10000 >;
-            xlnx,count-width = <0x20>;
-            xlnx,family = "spartan6";
-            xlnx,gen0-assert = <0x1>;
-            xlnx,gen1-assert = <0x1>;
-            xlnx,one-timer-only = <0x0>;
-            xlnx,trig0-assert = <0x1>;
-            xlnx,trig1-assert = <0x1>;
-        } ;
-    } ;
-} ;
diff --git a/board/avnet/s6lx9_microboard/lx9_mmu_defconfig b/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
deleted file mode 100644
index 5d01ca00a1..0000000000
--- a/board/avnet/s6lx9_microboard/lx9_mmu_defconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_SHMEM is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_OPT_LIB_ASM is not set
-CONFIG_KERNEL_BASE_ADDR=0x80000000
-CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
-CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
-# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
-CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
-CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
-CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
-CONFIG_HZ_100=y
-CONFIG_MMU=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE_FORCE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_UARTLITE=y
-CONFIG_SERIAL_UARTLITE_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_CIFS=y
-CONFIG_CIFS_STATS=y
-CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_DEBUG_INFO=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/board/avnet/s6lx9_microboard/readme.txt b/board/avnet/s6lx9_microboard/readme.txt
deleted file mode 100644
index 3cb2ce982a..0000000000
--- a/board/avnet/s6lx9_microboard/readme.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
-
-The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
-a Spartan6 FPGA capable of running the Microblaze softcore processor
-together with RAM and FLASH memory.
-
-The board can be bought from Avnet (avnet.com) or from Trenz Electronic
-(www.trenz-electronic.de) for a low price.
-
-To run the Linux built with buildroot you have to install the FPGA bitfile
-and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
-available on http://www.em.avnet.com/s6microboard
-
-On this site also is a forum containing information on how to build your own
-Microblaze processor for the Microboard.
-
-The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
-to your tftp folder (often /tftpboot/) or can be programmed into the
-board's SPI flash.
-
-Sample session:
-
-$ make s6lx9_microboard_defconfig
-$ make
-$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
-$ minicom
-<hit the reset button on the S6LX9 Microboard>
-
-                Icache:ON
-                Dcache:ON
-        U-Boot Start:0x83f00000
-SF: Got idcode 20 ba 18 10 01
-*** Warning - bad CRC, using default environment
-
-Net:   Xilinx_Emaclite
-MAC:   00:0a:35:00:63:37
-U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
-
-BOOTP broadcast 1
-DHCP client bound to address 192.168.11.122
-Hit any key to stop autoboot:  0
-U-Boot-PetaLinux> tftp br12.2a.ub
-Using Xilinx_Emaclite device
-TFTP from server 192.168.11.10; our IP address is 192.168.11.122
-Filename 'br12.2a.ub'.
-Load address: 0x80002000
-Loading: #################################################################
-         #################################################################
-         #################################################################
-         #################################################################
-         #################################################################
-         ##############################
-done
-Bytes transferred = 5207724 (4f76ac hex)
-U-Boot-PetaLinux> bootm
-## Booting kernel from Legacy Image at 80002000 ...
-   Image Name:   Linux-3.1.0
-   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
-   Data Size:    5207660 Bytes =  5 MB
-   Load Address: 80000000
-   Entry Point:  80000000
-   Verifying Checksum ... OK
-   Loading Kernel Image ... OK
-OK
-## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
-Early console on uartlite at 0x40600000
-..... boot log skipped
-
-Welcome to Microblaze Buildroot
-Microblaze login:
diff --git a/configs/s6lx9_microboard_defconfig b/configs/s6lx9_microboard_defconfig
deleted file mode 100644
index b2d1d49d79..0000000000
--- a/configs/s6lx9_microboard_defconfig
+++ /dev/null
@@ -1,11 +0,0 @@
-BR2_microblazeel=y
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.7"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/avnet/s6lx9_microboard/lx9_mmu_defconfig"
-BR2_LINUX_KERNEL_CUSTOM_DTS_PATH="board/avnet/s6lx9_microboard/lx9_mmu.dts"
-BR2_TARGET_ROOTFS_INITRAMFS=y
-# BR2_TARGET_ROOTFS_TAR is not set
-- 
2.54.0

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

^ permalink raw reply related	[flat|nested] 9+ messages in thread
end of thread, other threads:[~2026-06-12 11:37 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-06 22:51 [Buildroot] [PATCH 1/7] configs/s6lx9_microboard_defconfig: remove defconfig Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 2/7] configs/ts4900_defconfig: " Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 3/7] package/ts4900-fpga: remove package Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 4/7] configs/ts5500_defconfig: remove defconfig Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 5/7] configs/acmesystems_aria_g25_{128mb, 256mb}_defconfig: " Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 6/7] configs/acmesystems_arietta_g25_{128mb, " Romain Naour via buildroot
2026-06-06 22:51 ` [Buildroot] [PATCH 7/7] configs/arcturus_ucp1020: specify Linux license file Romain Naour via buildroot
2026-06-07 20:16   ` Julien Olivain via buildroot
2026-06-12 11:37   ` Thomas Perale via buildroot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox