* [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package
@ 2026-09-04 16:54 Fiona Klute via buildroot
2026-10-03 16:29 ` Thomas Petazzoni via buildroot
2026-10-10 9:23 ` Thomas Perale via buildroot
0 siblings, 2 replies; 3+ messages in thread
From: Fiona Klute via buildroot @ 2026-09-04 16:54 UTC (permalink / raw)
To: buildroot; +Cc: Fiona Klute (othermo GmbH)
From: "Fiona Klute (othermo GmbH)" <fiona.klute@gmx.de>
mke2fs need libarchive to populate a newly created filesystem from a
tarball with "-d tarball|-". Enable it in HOST_E2FSPROGS_CONF_OPTS,
and add a dependency on host-libarchive.
Signed-off-by: Fiona Klute (othermo GmbH) <fiona.klute@gmx.de>
---
I need "mke2fs -d" in a post-image script. I could add a config option
for host-libarchive, but it's not a heavy package, so simplicity is
probably better. :-)
package/e2fsprogs/e2fsprogs.mk | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/package/e2fsprogs/e2fsprogs.mk b/package/e2fsprogs/e2fsprogs.mk
index d9ebf4c73d..e9dd367ce9 100644
--- a/package/e2fsprogs/e2fsprogs.mk
+++ b/package/e2fsprogs/e2fsprogs.mk
@@ -16,7 +16,7 @@ E2FSPROGS_INSTALL_STAGING = YES
# This prevents overriding them with e2fsprogs' ones, which may cause
# problems for other packages.
E2FSPROGS_DEPENDENCIES = host-pkgconf util-linux
-HOST_E2FSPROGS_DEPENDENCIES = host-pkgconf host-util-linux
+HOST_E2FSPROGS_DEPENDENCIES = host-libarchive host-pkgconf host-util-linux
E2FSPROGS_SELINUX_MODULES = fstools
@@ -34,6 +34,7 @@ HOST_E2FSPROGS_CONF_OPTS = \
--enable-symlink-install \
--enable-elf-shlibs \
--with-crond-dir=no \
+ --with-libarchive=yes \
--with-udev-rules-dir=no \
--with-systemd-unit-dir=no
--
2.55.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package
2026-09-04 16:54 [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package Fiona Klute via buildroot
@ 2026-10-03 16:29 ` Thomas Petazzoni via buildroot
2026-10-10 9:23 ` Thomas Perale via buildroot
1 sibling, 0 replies; 3+ messages in thread
From: Thomas Petazzoni via buildroot @ 2026-10-03 16:29 UTC (permalink / raw)
To: Fiona Klute; +Cc: buildroot
On Fri, Sep 04, 2026 at 06:54:27PM +0200, Fiona Klute via buildroot wrote:
> From: "Fiona Klute (othermo GmbH)" <fiona.klute@gmx.de>
>
> mke2fs need libarchive to populate a newly created filesystem from a
> tarball with "-d tarball|-". Enable it in HOST_E2FSPROGS_CONF_OPTS,
> and add a dependency on host-libarchive.
>
> Signed-off-by: Fiona Klute (othermo GmbH) <fiona.klute@gmx.de>
Applied to master, thanks!
Best regards,
Thomas Petazzoni
--
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package
2026-09-04 16:54 [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package Fiona Klute via buildroot
2026-10-03 16:29 ` Thomas Petazzoni via buildroot
@ 2026-10-10 9:23 ` Thomas Perale via buildroot
1 sibling, 0 replies; 3+ messages in thread
From: Thomas Perale via buildroot @ 2026-10-10 9:23 UTC (permalink / raw)
To: Fiona Klute; +Cc: Thomas Perale, buildroot
In reply of:
> mke2fs need libarchive to populate a newly created filesystem from a
> tarball with "-d tarball|-". Enable it in HOST_E2FSPROGS_CONF_OPTS,
> and add a dependency on host-libarchive.
>
> Signed-off-by: Fiona Klute (othermo GmbH) <fiona.klute@gmx.de>
Applied to 2025.02.x & 2026.08.x. Thanks
> ---
> I need "mke2fs -d" in a post-image script. I could add a config option
> for host-libarchive, but it's not a heavy package, so simplicity is
> probably better. :-)
>
> package/e2fsprogs/e2fsprogs.mk | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/package/e2fsprogs/e2fsprogs.mk b/package/e2fsprogs/e2fsprogs.mk
> index d9ebf4c73d..e9dd367ce9 100644
> --- a/package/e2fsprogs/e2fsprogs.mk
> +++ b/package/e2fsprogs/e2fsprogs.mk
> @@ -16,7 +16,7 @@ E2FSPROGS_INSTALL_STAGING = YES
> # This prevents overriding them with e2fsprogs' ones, which may cause
> # problems for other packages.
> E2FSPROGS_DEPENDENCIES = host-pkgconf util-linux
> -HOST_E2FSPROGS_DEPENDENCIES = host-pkgconf host-util-linux
> +HOST_E2FSPROGS_DEPENDENCIES = host-libarchive host-pkgconf host-util-linux
>
> E2FSPROGS_SELINUX_MODULES = fstools
>
> @@ -34,6 +34,7 @@ HOST_E2FSPROGS_CONF_OPTS = \
> --enable-symlink-install \
> --enable-elf-shlibs \
> --with-crond-dir=no \
> + --with-libarchive=yes \
> --with-udev-rules-dir=no \
> --with-systemd-unit-dir=no
>
> --
> 2.55.0
>
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2026-10-10 9:23 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-09-04 16:54 [Buildroot] [PATCH 1/1] package/e2fsprogs: enable libarchive for host package Fiona Klute via buildroot
2026-10-03 16:29 ` Thomas Petazzoni via buildroot
2026-10-10 9:23 ` Thomas Perale via buildroot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox