From: Fiona Klute via buildroot <buildroot@buildroot.org>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Elder <paul.elder@ideasonboard.com>
Cc: buildroot@buildroot.org, sakari.ailus@iki.fi,
Eric Le Bihan <eric.le.bihan.dev@free.fr>
Subject: Re: [Buildroot] [PATCH] package/raw2rgbpnm: Add package for raw2rgbpnm
Date: Wed, 16 Sep 2026 20:34:54 +0200 [thread overview]
Message-ID: <c245e93b-d27e-454b-bba5-bc2eaf2fbb53@gmx.de> (raw)
In-Reply-To: <20260916164355.GA191870@killaraus.ideasonboard.com>
Hi Paul, Laurent, everyone!
Am 16.09.26 um 18:43 schrieb Laurent Pinchart:
> On Wed, Sep 16, 2026 at 06:07:04PM +0900, Paul Elder wrote:
>> Add package for raw2rgbpnm. It is a tool for converting raw images to
>> RGB PNM. While the original repo is at:
>> https://git.retiisi.eu/?p=~sailus/raw2rgbpnm.git
>> A mirror is hosted on freedesktop:
>> https://gitlab.freedesktop.org/camera/raw2rgbpnm
>> so use that instead.
Why use a mirror instead of the primary repository?
>> As the build is simple and has no dependencies nor releases, use the
>> master branch for the version.
>
> I don't know what buildroot's policy is with this, but using the master
> branch will make builds non-reproducible. I would instead use the commit
> ID of the current master branch head. It can be updated in future
> buildroot releases.
That is indeed against policy: "Note: Using a branch name as FOO_VERSION
is not supported, because it does not and can not work as people would
expect it should" [1]. The version must be fixed, if there are no
releases using a commit hash is the right thing to do.
Also, Buildroot policy is that a package must contain a hash file that
gives hashes of relevant archives and license files, see section 18.4.
"The .hash file" [2] in the manual. That is missing here, and would
necessarily break with a branch HEAD.
>> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
>>
>> ---
>> This patch is based on 2026.08.
>> ---
>> package/Config.in | 1 +
>> package/raw2rgbpnm/Config.in | 6 ++++++
>> package/raw2rgbpnm/raw2rgbpnm.mk | 16 ++++++++++++++++
>> 3 files changed, 23 insertions(+)
>> create mode 100644 package/raw2rgbpnm/Config.in
>> create mode 100644 package/raw2rgbpnm/raw2rgbpnm.mk
>>
>> diff --git a/package/Config.in b/package/Config.in
>> index 6058800682b4..6d9daeadafec 100644
>> --- a/package/Config.in
>> +++ b/package/Config.in
>> @@ -195,6 +195,7 @@ menu "Development tools"
>> source "package/mawk/Config.in"
>> source "package/patch/Config.in"
>> source "package/pkgconf/Config.in"
>> + source "package/raw2rgbpnm/Config.in"
>> source "package/ripgrep/Config.in"
>> source "package/sed/Config.in"
>> source "package/subversion/Config.in"
>> diff --git a/package/raw2rgbpnm/Config.in b/package/raw2rgbpnm/Config.in
>> new file mode 100644
>> index 000000000000..3d8f36459f4e
>> --- /dev/null
>> +++ b/package/raw2rgbpnm/Config.in
>> @@ -0,0 +1,6 @@
>> +config BR2_PACKAGE_RAW2RGBPNM
>> + bool "raw2rgbpnm"
>> + help
>> + Convert raw bayer images to RGB PNM for easier viewing
>> +
>> + https://gitlab.freedesktop.org/camera/raw2rgbpnm
>> diff --git a/package/raw2rgbpnm/raw2rgbpnm.mk b/package/raw2rgbpnm/raw2rgbpnm.mk
>> new file mode 100644
>> index 000000000000..275fe6f32be3
>> --- /dev/null
>> +++ b/package/raw2rgbpnm/raw2rgbpnm.mk
>> @@ -0,0 +1,16 @@
>> +################################################################################
>> +#
>> +# raw2rgbpnm
>> +#
>> +################################################################################
>> +
>> +RAW2RGBPNM_SITE = https://gitlab.freedesktop.org/camera/raw2rgbpnm
>> +RAW2RGBPNM_SITE_METHOD = git
>> +RAW2RGBPNM_VERSION = master
>> +
>> +RAW2RGBPNM_LICENSE = GPL-2.0
SPDX has deprecated "GPL-2.0" because it's easily confused with the "or
later" version, this should be "GPL-2.0-only" [3].
@Laurent, you appear to be the author of the raw2rgbpnm meson.build
file. The license is listed as "GPL 2.0+" there, which is not an SPDX
identifier (dash, not space) and does not match the C file headers,
which indicate 2.0 *only*.
>> +RAW2RGBPNM_LICENSE_FILES = LICENSE
>> +
>> +RAW2RGBPNM_INSTALL_TARGET = YES
This is the default, so remove it. If you run "make check-package", it
should warn you about that.
@Paul: Also the initial patch didn't go over the mailing list, only
Laurent's reply. Have you subscribed to the ML?
Best regards,
Fiona
[1] https://nightly.buildroot.org/#generic-package-reference
[2] https://nightly.buildroot.org/#adding-packages-hash
[3] https://spdx.org/licenses/GPL-2.0.html
[4]
https://git.retiisi.eu/?p=~sailus/raw2rgbpnm.git;a=commitdiff;h=HEAD;hp=c23c8fa65fcfdfbb6c3ebd63d101fe9844e3c19f
>> +$(eval $(meson-package))
>
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot
next prev parent reply other threads:[~2026-09-16 18:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260916090705.2796356-1-paul.elder@ideasonboard.com>
2026-09-16 16:43 ` [Buildroot] [PATCH] package/raw2rgbpnm: Add package for raw2rgbpnm Laurent Pinchart
2026-09-16 18:34 ` Fiona Klute via buildroot [this message]
2026-09-16 19:48 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c245e93b-d27e-454b-bba5-bc2eaf2fbb53@gmx.de \
--to=buildroot@buildroot.org \
--cc=eric.le.bihan.dev@free.fr \
--cc=fiona.klute@gmx.de \
--cc=laurent.pinchart@ideasonboard.com \
--cc=paul.elder@ideasonboard.com \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox