* [Buildroot] [pull request] Pull request for branch fs-fixes
@ 2010-04-17 4:02 Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 1/6] cramfs: fix installation Thomas Petazzoni
` (6 more replies)
0 siblings, 7 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
Hello,
Here is the fix for bug #1537, i.e "device entries no longer
created". It is a severe regression introduced by my filesystem
cleanup code. The problem was that the TARGET_DEVICE_TABLE variable
was no longer defined.
To fix it, I took the approach I intend to take to cleanup the rest of
target/, i.e use normal configuration options instead of variables
defined in board-specific Makefiles.
Therefore, I've added a new BR2_ROOTFS_DEVICE_TABLE option, which
contains the path to the device table that should be used.
Regards,
Thomas
The following changes since commit 65e209ca07416bc040fe98d16b60b6cb4304987f:
Peter Korsgaard (1):
openssl: fix build without ipv6 support
are available in the git repository at:
git://git.busybox.net/~tpetazzoni/git/buildroot fs-fixes
Thomas Petazzoni (6):
cramfs: fix installation
fs: change the way the device table is configured
cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable
documentation: update after TARGET_DEVICE_TABLE removal
Remove all TARGET_DEVICE_TABLE definitions
Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definition
configs/arm_toolchain_defconfig | 1 +
configs/at91rm9200df_defconfig | 1 +
configs/at91rm9200df_ext_bare_defconfig | 1 +
configs/at91rm9200df_ext_defconfig | 1 +
configs/at91sam9260dfc_defconfig | 1 +
configs/at91sam9260dfc_ext_bare_defconfig | 1 +
configs/at91sam9260dfc_ext_defconfig | 1 +
configs/at91sam9260pf_defconfig | 1 +
configs/at91sam9261ek_defconfig | 1 +
configs/at91sam9261ek_ext_bare_defconfig | 1 +
configs/at91sam9261ek_ext_defconfig | 1 +
configs/at91sam9263ek_defconfig | 1 +
configs/at91sam9263ek_ext_bare_defconfig | 1 +
configs/at91sam9263ek_ext_defconfig | 1 +
configs/at91sam9g20dfc_defconfig | 1 +
configs/at91sam9g20dfc_ext_bare_defconfig | 1 +
configs/at91sam9g20dfc_ext_defconfig | 1 +
configs/atngw100-base_defconfig | 1 +
configs/atngw100_defconfig | 1 +
configs/atstk1005_defconfig | 1 +
configs/atstk100x_defconfig | 1 +
configs/kb9202_defconfig | 1 +
configs/v100sc2_defconfig | 1 +
docs/buildroot.html | 10 --
fs/Config.in | 8 +
fs/common.mk | 5 +-
fs/cramfs/cramfs.mk | 4 +-
fs/jffs2/jffs2.mk | 4 +-
package/cramfs/cramfs.mk | 8 +-
target/device/Atmel/Makefile.in | 1 -
target/device/Atmel/atngw100-base/Makefile.in | 1 -
target/device/Atmel/atngw100/Makefile.in | 1 -
target/device/Atmel/atstk1005/Makefile.in | 1 -
target/device/Atmel/atstk100x/Makefile.in | 1 -
target/device/KwikByte/kb9202/Makefile.in | 1 -
target/device/valka/Makefile.in | 2 -
target/device/xtensa/Makefile.in | 8 -
target/device/xtensa/device_table.diff | 10 --
target/device/xtensa/device_table.txt | 189 +++++++++++++++++++++++++
target/generic/Makefile.in | 2 -
target/xtensa/defconfig | 1 +
41 files changed, 232 insertions(+), 48 deletions(-)
delete mode 100644 target/device/xtensa/device_table.diff
create mode 100644 target/device/xtensa/device_table.txt
Thanks,
--
Thomas Petazzoni
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 1/6] cramfs: fix installation
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 2/6] fs: change the way the device table is configured Thomas Petazzoni
` (5 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
The installation procedure of cramfs was broken when
$(HOST_DIR)/usr/bin didn't exist (i.e, cramfsck was installed as
$(HOST_DIR)/usr/bin directly). Use install -D with a proper
destination argument to make it work.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/cramfs/cramfs.mk | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/package/cramfs/cramfs.mk b/package/cramfs/cramfs.mk
index 7b1924e..9073ae5 100644
--- a/package/cramfs/cramfs.mk
+++ b/package/cramfs/cramfs.mk
@@ -16,8 +16,8 @@ define CRAMFS_BUILD_CMDS
endef
define CRAMFS_INSTALL_TARGET_CMDS
- install -m 755 $(@D)/mkcramfs $(TARGET_DIR)/usr/bin
- install -m 755 $(@D)/cramfsck $(TARGET_DIR)/usr/bin
+ install -D -m 755 $(@D)/mkcramfs $(TARGET_DIR)/usr/bin/mkcramfs
+ install -D -m 755 $(@D)/cramfsck $(TARGET_DIR)/usr/bin/cramfsck
endef
define HOST_CRAMFS_BUILD_CMDS
@@ -25,8 +25,8 @@ define HOST_CRAMFS_BUILD_CMDS
endef
define HOST_CRAMFS_INSTALL_CMDS
- install -m 755 $(@D)/mkcramfs $(HOST_DIR)/usr/bin
- install -m 755 $(@D)/cramfsck $(HOST_DIR)/usr/bin
+ install -D -m 755 $(@D)/mkcramfs $(HOST_DIR)/usr/bin/mkcramfs
+ install -D -m 755 $(@D)/cramfsck $(HOST_DIR)/usr/bin/cramfsck
endef
$(eval $(call GENTARGETS,package,cramfs))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 2/6] fs: change the way the device table is configured
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 1/6] cramfs: fix installation Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 3/6] cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable Thomas Petazzoni
` (4 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
Until now, the location of the device table was specified by a
variable in board Makefiles. Unfortunately, this variable is not
accessible from fs/common.mk, since the target/ code is included
*after* fs/common.mk.
Anyway, the general idea is to move away from these boards Makefile,
and provide configuration option for things like the device table
location.
Therefore, this patch adds a BR2_ROOTFS_DEVICE_TABLE option which
allows to specify which device table should be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
fs/Config.in | 8 ++++++++
fs/common.mk | 5 +++--
2 files changed, 11 insertions(+), 2 deletions(-)
diff --git a/fs/Config.in b/fs/Config.in
index f885c52..6865eea 100644
--- a/fs/Config.in
+++ b/fs/Config.in
@@ -15,6 +15,14 @@ config BR2_ROOTFS_POST_BUILD_SCRIPT
only argument. Make sure the exit code of that script is 0,
otherwise make will stop after calling it.
+config BR2_ROOTFS_DEVICE_TABLE
+ string "Path to the device table"
+ default "target/generic/device_table.txt"
+ help
+ Specify the location of a device table, that will be passed
+ to the makedevs utility to create all the special device
+ files in the target filesystem.
+
source "fs/cramfs/Config.in"
source "fs/cloop/Config.in"
source "fs/ext2/Config.in"
diff --git a/fs/common.mk b/fs/common.mk
index fa6afd9..cc94eb4 100644
--- a/fs/common.mk
+++ b/fs/common.mk
@@ -28,6 +28,7 @@
# macro will automatically generate a compressed filesystem image.
FAKEROOT_SCRIPT = $(BUILD_DIR)/_fakeroot.fs
+ROOTFS_DEVICE_TABLE = $(call qstrip,$(BR2_ROOTFS_DEVICE_TABLE))
define ROOTFS_TARGET_INTERNAL
@@ -38,8 +39,8 @@ $(BINARIES_DIR)/rootfs.$(1): $(ROOTFS_$(2)_DEPENDENCIES) host-fakeroot makedevs
touch $(BUILD_DIR)/.fakeroot.00000
cat $(BUILD_DIR)/.fakeroot* > $(FAKEROOT_SCRIPT)
echo "chown -R 0:0 $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
-ifneq ($(TARGET_DEVICE_TABLE),)
- echo "$(HOST_DIR)/usr/bin/makedevs -d $(TARGET_DEVICE_TABLE) $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
+ifneq ($(ROOTFS_DEVICE_TABLE),)
+ echo "$(HOST_DIR)/usr/bin/makedevs -d $(ROOTFS_DEVICE_TABLE) $(TARGET_DIR)" >> $(FAKEROOT_SCRIPT)
endif
echo "$(ROOTFS_$(2)_CMD)" >> $(FAKEROOT_SCRIPT)
chmod a+x $(FAKEROOT_SCRIPT)
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 3/6] cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 1/6] cramfs: fix installation Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 2/6] fs: change the way the device table is configured Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 4/6] documentation: update after TARGET_DEVICE_TABLE removal Thomas Petazzoni
` (3 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
fs/cramfs/cramfs.mk | 4 ++--
fs/jffs2/jffs2.mk | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/fs/cramfs/cramfs.mk b/fs/cramfs/cramfs.mk
index ccd316f..e0deb7e 100644
--- a/fs/cramfs/cramfs.mk
+++ b/fs/cramfs/cramfs.mk
@@ -9,8 +9,8 @@ else
CRAMFS_OPTS=-l
endif
-ifneq ($(TARGET_DEVICE_TABLE),)
-CRAMFS_OPTS += -D $(TARGET_DEVICE_TABLE)
+ifneq ($(ROOTFS_DEVICE_TABLE),)
+CRAMFS_OPTS += -D $(ROOTFS_DEVICE_TABLE)
endif
define ROOTFS_CRAMFS_CMD
diff --git a/fs/jffs2/jffs2.mk b/fs/jffs2/jffs2.mk
index a0a563d..36be037 100644
--- a/fs/jffs2/jffs2.mk
+++ b/fs/jffs2/jffs2.mk
@@ -32,8 +32,8 @@ JFFS2_OPTS += -n
SUMTOOL_OPTS += -n
endif
-ifneq ($(TARGET_DEVICE_TABLE),)
-JFFS2_OPTS += -D $(TARGET_DEVICE_TABLE)
+ifneq ($(ROOTFS_DEVICE_TABLE),)
+JFFS2_OPTS += -D $(ROOTFS_DEVICE_TABLE)
endif
ROOTFS_JFFS2_DEPENDENCIES = host-mtd
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 4/6] documentation: update after TARGET_DEVICE_TABLE removal
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
` (2 preceding siblings ...)
2010-04-17 4:02 ` [Buildroot] [PATCH 3/6] cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions Thomas Petazzoni
` (2 subsequent siblings)
6 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
docs/buildroot.html | 10 ----------
1 files changed, 0 insertions(+), 10 deletions(-)
diff --git a/docs/buildroot.html b/docs/buildroot.html
index dfa69e0..abe822f 100644
--- a/docs/buildroot.html
+++ b/docs/buildroot.html
@@ -661,16 +661,6 @@ endif
<code>$(BOARD_PATH)/target_skeleton</code> so that the target
skeleton is stored in the board specific directory.</li>
- <li><code>TARGET_DEVICE_TABLE</code> to a file that contains
- the target device table — the list of device files (in
- <code>/dev/</code>) to be created by the root filesystem build
- procedure. If this variable is defined, the given device table
- will be used instead of the default one. If defined, the
- convention is to define it to
- <code>$(BOARD_PATH)/target_device_table.txt</code>. See
- <code>target/generic/device_table.txt</code> for an example
- file.</li>
-
</ul>
</li>
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
` (3 preceding siblings ...)
2010-04-17 4:02 ` [Buildroot] [PATCH 4/6] documentation: update after TARGET_DEVICE_TABLE removal Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-17 4:23 ` Marc Gauthier
2010-04-17 4:02 ` [Buildroot] [PATCH 6/6] Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definition Thomas Petazzoni
2010-04-18 20:32 ` [Buildroot] [pull request] Pull request for branch fs-fixes Peter Korsgaard
6 siblings, 1 reply; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
We have a special case for Xtensa, which was patching the generic
device_table.txt. Instead of doing this, we just keep a copy of the
device table, specific to Xtensa, with Xtensa specifities. The fact
that the patch wasn't applying anymore on the generic device table is
a sign that the existing approach wasn't working anyway.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
target/device/Atmel/Makefile.in | 1 -
target/device/Atmel/atngw100-base/Makefile.in | 1 -
target/device/Atmel/atngw100/Makefile.in | 1 -
target/device/Atmel/atstk1005/Makefile.in | 1 -
target/device/Atmel/atstk100x/Makefile.in | 1 -
target/device/KwikByte/kb9202/Makefile.in | 1 -
target/device/valka/Makefile.in | 2 -
target/device/xtensa/Makefile.in | 8 -
target/device/xtensa/device_table.diff | 10 --
target/device/xtensa/device_table.txt | 189 +++++++++++++++++++++++++
target/generic/Makefile.in | 2 -
11 files changed, 189 insertions(+), 28 deletions(-)
delete mode 100644 target/device/xtensa/device_table.diff
create mode 100644 target/device/xtensa/device_table.txt
diff --git a/target/device/Atmel/Makefile.in b/target/device/Atmel/Makefile.in
index bf7a2d1..c5dfffd 100644
--- a/target/device/Atmel/Makefile.in
+++ b/target/device/Atmel/Makefile.in
@@ -8,7 +8,6 @@ BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
ATMEL_TARGET:=$(ATMEL_PATH)/root
TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
-TARGET_DEVICE_TABLE:=$(ATMEL_TARGET)/device_table.txt
TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz
ifeq ($(BR2_avr32),y)
diff --git a/target/device/Atmel/atngw100-base/Makefile.in b/target/device/Atmel/atngw100-base/Makefile.in
index 467951f..c2f2969 100644
--- a/target/device/Atmel/atngw100-base/Makefile.in
+++ b/target/device/Atmel/atngw100-base/Makefile.in
@@ -1,5 +1,4 @@
ifeq ($(BR2_TARGET_AVR32_ATNGW100_BASE),y)
UBOOT_BOARD_NAME:=atngw100
TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
endif
diff --git a/target/device/Atmel/atngw100/Makefile.in b/target/device/Atmel/atngw100/Makefile.in
index 3c34d8d..7e02d8e 100644
--- a/target/device/Atmel/atngw100/Makefile.in
+++ b/target/device/Atmel/atngw100/Makefile.in
@@ -1,5 +1,4 @@
ifeq ($(BR2_TARGET_AVR32_ATNGW100),y)
UBOOT_BOARD_NAME:=atngw100
TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
endif
diff --git a/target/device/Atmel/atstk1005/Makefile.in b/target/device/Atmel/atstk1005/Makefile.in
index 4c3aadf..84b3107 100644
--- a/target/device/Atmel/atstk1005/Makefile.in
+++ b/target/device/Atmel/atstk1005/Makefile.in
@@ -1,4 +1,3 @@
ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1005)),y)
TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
endif
diff --git a/target/device/Atmel/atstk100x/Makefile.in b/target/device/Atmel/atstk100x/Makefile.in
index e9dd4dc..395c74a 100644
--- a/target/device/Atmel/atstk100x/Makefile.in
+++ b/target/device/Atmel/atstk100x/Makefile.in
@@ -1,5 +1,4 @@
ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
UBOOT_BOARD_NAME:=atstk1002
TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
endif
diff --git a/target/device/KwikByte/kb9202/Makefile.in b/target/device/KwikByte/kb9202/Makefile.in
index 5d743ce..0048dcc 100644
--- a/target/device/KwikByte/kb9202/Makefile.in
+++ b/target/device/KwikByte/kb9202/Makefile.in
@@ -1,4 +1,3 @@
BOARD_PATH=target/device/KwikByte/kb9202
TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
diff --git a/target/device/valka/Makefile.in b/target/device/valka/Makefile.in
index 0142246..fec4d88 100644
--- a/target/device/valka/Makefile.in
+++ b/target/device/valka/Makefile.in
@@ -2,7 +2,6 @@ ifeq ($(BR2_TARGET_VALKA),y)
VALKA_PATH= target/device/valka
TARGET_SKELETON=$(VALKA_PATH)/target_skeleton
-TARGET_DEVICE_TABLE=$(VALKA_PATH)/device_table.txt
KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2
valka_status:
@@ -10,7 +9,6 @@ valka_status:
@echo VALKA_PATH = $(VALKA_PATH)
@echo BOARD_NAME = $(BR_BOARD_NAME)
@echo TARGET_SKELETON = $(TARGET_SKELETON)
- @echo TARGET_DEVICE_TABLE = $(TARGET_DEVICE_TABLE)
@echo BR2_PACKAGE_BUSYBOX_CONFIG = $(BR2_PACKAGE_BUSYBOX_CONFIG)
@echo BR2_PACKAGE_LINUX_KCONFIG = $(BR2_PACKAGE_LINUX_KCONFIG)
@echo "*****************************************************************"
diff --git a/target/device/xtensa/Makefile.in b/target/device/xtensa/Makefile.in
index 7c95c23..f878a82 100644
--- a/target/device/xtensa/Makefile.in
+++ b/target/device/xtensa/Makefile.in
@@ -6,12 +6,4 @@ ifeq ($(strip $(BR2_TARGET_XTENSA_XTAV60)),y)
TARGET_SKELETON_PATCH:=target/device/xtensa
endif
-# Custom device table patch used when targeting ISS:
-OLD_TARGET_DEVICE_TABLE := $(TARGET_DEVICE_TABLE)
-TARGET_DEVICE_TABLE := target/device/xtensa/device_table.txt
-makedevs:
- @echo "Applying patch to $(TARGET_DEVICE_TABLE)"
- cp -f $(OLD_TARGET_DEVICE_TABLE) $(TARGET_DEVICE_TABLE)
- patch -p1 -g 0 < target/device/xtensa/device_table.diff
-
endif
diff --git a/target/device/xtensa/device_table.diff b/target/device/xtensa/device_table.diff
deleted file mode 100644
index 12f6825..0000000
--- a/target/device/xtensa/device_table.diff
+++ /dev/null
@@ -1,10 +0,0 @@
-diff --git a/target/generic/device_table.txt b/target/generic/device_table.txt
-index f4b16ba..b87bf69 100644
---- a/target/device/xtensa/device_table.txt
-+++ b/target/device/xtensa/device_table.txt
-@@ -169,3 +169,5 @@
- #/dev/mcd b 640 0 0 23 0 0 0
- #/dev/optcd b 640 0 0 17 0 0 0
-
-+/dev/simdisk0 b 640 0 0 240 0 0 0
-+/dev/simdisk1 b 640 0 0 240 1 0 0
diff --git a/target/device/xtensa/device_table.txt b/target/device/xtensa/device_table.txt
new file mode 100644
index 0000000..d0c7467
--- /dev/null
+++ b/target/device/xtensa/device_table.txt
@@ -0,0 +1,189 @@
+# When building a target filesystem, it is desirable to not have to
+# become root and then run 'mknod' a thousand times. Using a device
+# table you can create device nodes and directories "on the fly".
+#
+# This is a sample device table file for use with genext2fs. You can
+# do all sorts of interesting things with a device table file. For
+# example, if you want to adjust the permissions on a particular file
+# you can just add an entry like:
+# /sbin/foobar f 2755 0 0 - - - - -
+# and (assuming the file /sbin/foobar exists) it will be made setuid
+# root (regardless of what its permissions are on the host filesystem.
+# Furthermore, you can use a single table entry to create a many device
+# minors. For example, if I wanted to create /dev/hda and /dev/hda[0-15]
+# I could just use the following two table entries:
+# /dev/hda b 640 0 0 3 0 0 0 -
+# /dev/hda b 640 0 0 3 1 1 1 15
+#
+# Device table entries take the form of:
+# <name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+# where name is the file name, type can be one of:
+# f A regular file
+# d Directory
+# c Character special device file
+# b Block special device file
+# p Fifo (named pipe)
+# uid is the user id for the target file, gid is the group id for the
+# target file. The rest of the entries (major, minor, etc) apply only
+# to device special files.
+
+# Have fun
+# -Erik Andersen <andersen@codepoet.org>
+#
+
+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+/dev d 755 0 0 - - - - -
+/dev/pts d 755 0 0 - - - - -
+/dev/shm d 755 0 0 - - - - -
+/tmp d 1777 0 0 - - - - -
+/etc d 755 0 0 - - - - -
+/home/default d 2755 1000 1000 - - - - -
+#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
+/bin/busybox f 4755 0 0 - - - - -
+/etc/shadow f 600 0 0 - - - - -
+/etc/passwd f 644 0 0 - - - - -
+/etc/network/if-up.d d 755 0 0 - - - - -
+/etc/network/if-pre-up.d d 755 0 0 - - - - -
+/etc/network/if-down.d d 755 0 0 - - - - -
+/etc/network/if-post-down.d d 755 0 0 - - - - -
+/usr/share/udhcpc/default.script f 755 0 0 - - - - -
+# uncomment this to allow starting x as non-root
+#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
+# Normal system devices
+/dev/mem c 640 0 0 1 1 0 0 -
+/dev/kmem c 640 0 0 1 2 0 0 -
+/dev/null c 666 0 0 1 3 0 0 -
+/dev/zero c 666 0 0 1 5 0 0 -
+/dev/random c 666 0 0 1 8 0 0 -
+/dev/urandom c 666 0 0 1 9 0 0 -
+/dev/ram b 640 0 0 1 1 0 0 -
+/dev/ram b 640 0 0 1 0 0 1 4
+/dev/loop b 640 0 0 7 0 0 1 2
+/dev/rtc c 640 0 0 10 135 - - -
+/dev/console c 666 0 0 5 1 - - -
+/dev/tty c 666 0 0 5 0 - - -
+/dev/tty c 666 0 0 4 0 0 1 8
+/dev/ttyp c 666 0 0 3 0 0 1 10
+/dev/ptyp c 666 0 0 2 0 0 1 10
+/dev/ptmx c 666 0 0 5 2 - - -
+/dev/ttyP c 666 0 0 57 0 0 1 4
+/dev/ttyS c 666 0 0 4 64 0 1 4
+/dev/fb c 640 0 5 29 0 0 1 4
+#/dev/ttySA c 666 0 0 204 5 0 1 3
+/dev/psaux c 666 0 0 10 1 0 0 -
+#/dev/ppp c 666 0 0 108 0 - - -
+/dev/ttyCPM c 666 0 0 204 46 0 1 4
+/dev/ttyAMA c 666 0 0 204 64 0 1 4
+/dev/ttySAC c 666 0 0 204 64 0 1 4
+/dev/ttyPSC c 666 0 0 204 148 0 1 4
+/dev/ttyUL c 666 0 0 204 187 0 1 4
+/dev/ttymxc c 666 0 0 207 16 0 1 3
+
+# Input stuff
+/dev/input d 755 0 0 - - - - -
+/dev/input/mice c 640 0 0 13 63 0 0 -
+/dev/input/mouse c 660 0 0 13 32 0 1 4
+/dev/input/event c 660 0 0 13 64 0 1 4
+#/dev/input/js c 660 0 0 13 0 0 1 4
+
+
+# MTD stuff
+/dev/mtd c 640 0 0 90 0 0 2 4
+/dev/mtdblock b 640 0 0 31 0 0 1 4
+
+#Tun/tap driver
+/dev/net d 755 0 0 - - - - -
+/dev/net/tun c 660 0 0 10 200 - - -
+
+# Audio stuff
+#/dev/audio c 666 0 29 14 4 - - -
+#/dev/audio1 c 666 0 29 14 20 - - -
+#/dev/dsp c 666 0 29 14 3 - - -
+#/dev/dsp1 c 666 0 29 14 19 - - -
+#/dev/sndstat c 666 0 29 14 6 - - -
+
+# User-mode Linux stuff
+#/dev/ubda b 640 0 0 98 0 0 0 -
+#/dev/ubda b 640 0 0 98 1 1 1 15
+
+# IDE Devices
+/dev/hda b 640 0 0 3 0 0 0 -
+/dev/hda b 640 0 0 3 1 1 1 15
+/dev/hdb b 640 0 0 3 64 0 0 -
+/dev/hdb b 640 0 0 3 65 1 1 15
+#/dev/hdc b 640 0 0 22 0 0 0 -
+#/dev/hdc b 640 0 0 22 1 1 1 15
+#/dev/hdd b 640 0 0 22 64 0 0 -
+#/dev/hdd b 640 0 0 22 65 1 1 15
+#/dev/hde b 640 0 0 33 0 0 0 -
+#/dev/hde b 640 0 0 33 1 1 1 15
+#/dev/hdf b 640 0 0 33 64 0 0 -
+#/dev/hdf b 640 0 0 33 65 1 1 15
+#/dev/hdg b 640 0 0 34 0 0 0 -
+#/dev/hdg b 640 0 0 34 1 1 1 15
+#/dev/hdh b 640 0 0 34 64 0 0 -
+#/dev/hdh b 640 0 0 34 65 1 1 15
+
+# SCSI Devices
+/dev/sda b 640 0 0 8 0 0 0 -
+/dev/sda b 640 0 0 8 1 1 1 15
+/dev/sdb b 640 0 0 8 16 0 0 -
+/dev/sdb b 640 0 0 8 17 1 1 15
+#/dev/sdc b 640 0 0 8 32 0 0 -
+#/dev/sdc b 640 0 0 8 33 1 1 15
+#/dev/sdd b 640 0 0 8 48 0 0 -
+#/dev/sdd b 640 0 0 8 49 1 1 15
+#/dev/sde b 640 0 0 8 64 0 0 -
+#/dev/sde b 640 0 0 8 65 1 1 15
+#/dev/sdf b 640 0 0 8 80 0 0 -
+#/dev/sdf b 640 0 0 8 81 1 1 15
+#/dev/sdg b 640 0 0 8 96 0 0 -
+#/dev/sdg b 640 0 0 8 97 1 1 15
+#/dev/sdh b 640 0 0 8 112 0 0 -
+#/dev/sdh b 640 0 0 8 113 1 1 15
+#/dev/sg c 640 0 0 21 0 0 1 15
+#/dev/scd b 640 0 0 11 0 0 1 15
+#/dev/st c 640 0 0 9 0 0 1 8
+#/dev/nst c 640 0 0 9 128 0 1 8
+#/dev/st c 640 0 0 9 32 1 1 4
+#/dev/st c 640 0 0 9 64 1 1 4
+#/dev/st c 640 0 0 9 96 1 1 4
+
+# USB block devices (ub driver)
+/dev/uba b 640 0 0 180 0 0 0 -
+/dev/uba b 640 0 0 180 1 1 1 6
+/dev/ubb b 640 0 0 180 8 0 0 -
+/dev/ubb b 640 0 0 180 65 1 1 6
+
+# Floppy disk devices
+#/dev/fd b 640 0 0 2 0 0 1 2
+#/dev/fd0d360 b 640 0 0 2 4 0 0 -
+#/dev/fd1d360 b 640 0 0 2 5 0 0 -
+#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
+#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
+#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
+#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
+#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
+#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
+
+# All the proprietary cdrom devices in the world
+#/dev/aztcd b 640 0 0 29 0 0 0 -
+#/dev/bpcd b 640 0 0 41 0 0 0 -
+#/dev/capi20 c 640 0 0 68 0 0 1 2
+#/dev/cdu31a b 640 0 0 15 0 0 0 -
+#/dev/cdu535 b 640 0 0 24 0 0 0 -
+#/dev/cm206cd b 640 0 0 32 0 0 0 -
+#/dev/sjcd b 640 0 0 18 0 0 0 -
+#/dev/sonycd b 640 0 0 15 0 0 0 -
+#/dev/gscd b 640 0 0 16 0 0 0 -
+#/dev/sbpcd b 640 0 0 25 0 0 0 -
+#/dev/sbpcd b 640 0 0 25 0 0 1 4
+#/dev/mcd b 640 0 0 23 0 0 0 -
+#/dev/optcd b 640 0 0 17 0 0 0 -
+
+# I2C device nodes
+/dev/i2c- c 666 0 0 89 0 0 1 4
+
+# Xtensa special devices
+/dev/simdisk0 b 640 0 0 240 0 0 0
+/dev/simdisk1 b 640 0 0 240 1 0 0
diff --git a/target/generic/Makefile.in b/target/generic/Makefile.in
index f77f969..9a56f76 100644
--- a/target/generic/Makefile.in
+++ b/target/generic/Makefile.in
@@ -1,10 +1,8 @@
# Default target skeleton stuff, may be overridden
TARGET_SKELETON=target/generic/target_skeleton
-TARGET_DEVICE_TABLE=target/generic/device_table.txt
ifeq ($(BR2_PACKAGE_BUSYBOX_SKELETON),y)
TARGET_SKELETON=target/generic/target_busybox_skeleton
-TARGET_DEVICE_TABLE=target/generic/mini_device_table.txt
endif
TARGET_GENERIC_HOSTNAME:=$(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME))
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 6/6] Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definition
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
` (4 preceding siblings ...)
2010-04-17 4:02 ` [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions Thomas Petazzoni
@ 2010-04-17 4:02 ` Thomas Petazzoni
2010-04-18 20:32 ` [Buildroot] [pull request] Pull request for branch fs-fixes Peter Korsgaard
6 siblings, 0 replies; 9+ messages in thread
From: Thomas Petazzoni @ 2010-04-17 4:02 UTC (permalink / raw)
To: buildroot
We only bother updating the defconfigs that need a non-default
BR2_ROOTFS_DEVICE_TABLE value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
configs/arm_toolchain_defconfig | 1 +
configs/at91rm9200df_defconfig | 1 +
configs/at91rm9200df_ext_bare_defconfig | 1 +
configs/at91rm9200df_ext_defconfig | 1 +
configs/at91sam9260dfc_defconfig | 1 +
configs/at91sam9260dfc_ext_bare_defconfig | 1 +
configs/at91sam9260dfc_ext_defconfig | 1 +
configs/at91sam9260pf_defconfig | 1 +
configs/at91sam9261ek_defconfig | 1 +
configs/at91sam9261ek_ext_bare_defconfig | 1 +
configs/at91sam9261ek_ext_defconfig | 1 +
configs/at91sam9263ek_defconfig | 1 +
configs/at91sam9263ek_ext_bare_defconfig | 1 +
configs/at91sam9263ek_ext_defconfig | 1 +
configs/at91sam9g20dfc_defconfig | 1 +
configs/at91sam9g20dfc_ext_bare_defconfig | 1 +
configs/at91sam9g20dfc_ext_defconfig | 1 +
configs/atngw100-base_defconfig | 1 +
configs/atngw100_defconfig | 1 +
configs/atstk1005_defconfig | 1 +
configs/atstk100x_defconfig | 1 +
configs/kb9202_defconfig | 1 +
configs/v100sc2_defconfig | 1 +
target/xtensa/defconfig | 1 +
24 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/configs/arm_toolchain_defconfig b/configs/arm_toolchain_defconfig
index 529a363..8e89107 100644
--- a/configs/arm_toolchain_defconfig
+++ b/configs/arm_toolchain_defconfig
@@ -714,6 +714,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/generic/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91rm9200df_defconfig b/configs/at91rm9200df_defconfig
index e4c0b0e..e004b21 100644
--- a/configs/at91rm9200df_defconfig
+++ b/configs/at91rm9200df_defconfig
@@ -839,6 +839,7 @@ BR2_PACKAGE_LIBXML2=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91rm9200df_ext_bare_defconfig b/configs/at91rm9200df_ext_bare_defconfig
index 65a640b..032064a 100644
--- a/configs/at91rm9200df_ext_bare_defconfig
+++ b/configs/at91rm9200df_ext_bare_defconfig
@@ -635,6 +635,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91rm9200df_ext_defconfig b/configs/at91rm9200df_ext_defconfig
index 6a39002..35251a3 100644
--- a/configs/at91rm9200df_ext_defconfig
+++ b/configs/at91rm9200df_ext_defconfig
@@ -765,6 +765,7 @@ BR2_PACKAGE_LIBXML2=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9260dfc_defconfig b/configs/at91sam9260dfc_defconfig
index 8fb7f0e..b571c80 100644
--- a/configs/at91sam9260dfc_defconfig
+++ b/configs/at91sam9260dfc_defconfig
@@ -853,6 +853,7 @@ BR2_PACKAGE_LIBXML2=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9260dfc_ext_bare_defconfig b/configs/at91sam9260dfc_ext_bare_defconfig
index 6e4d478..e1ace69 100644
--- a/configs/at91sam9260dfc_ext_bare_defconfig
+++ b/configs/at91sam9260dfc_ext_bare_defconfig
@@ -635,6 +635,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91sam9260dfc_ext_defconfig b/configs/at91sam9260dfc_ext_defconfig
index 22287ba..c430d3d 100644
--- a/configs/at91sam9260dfc_ext_defconfig
+++ b/configs/at91sam9260dfc_ext_defconfig
@@ -773,6 +773,7 @@ BR2_PACKAGE_LIBXML2=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9260pf_defconfig b/configs/at91sam9260pf_defconfig
index 396adee..a2b8695 100644
--- a/configs/at91sam9260pf_defconfig
+++ b/configs/at91sam9260pf_defconfig
@@ -548,6 +548,7 @@ BR2_SCRIPTING_SUPPORT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9261ek_defconfig b/configs/at91sam9261ek_defconfig
index 73fc09c..1cfc2e7 100644
--- a/configs/at91sam9261ek_defconfig
+++ b/configs/at91sam9261ek_defconfig
@@ -904,6 +904,7 @@ BR2_PACKAGE_LIBXSLT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9261ek_ext_bare_defconfig b/configs/at91sam9261ek_ext_bare_defconfig
index 316c15e..5e5e22d 100644
--- a/configs/at91sam9261ek_ext_bare_defconfig
+++ b/configs/at91sam9261ek_ext_bare_defconfig
@@ -638,6 +638,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91sam9261ek_ext_defconfig b/configs/at91sam9261ek_ext_defconfig
index 4bb96f1..362680b 100644
--- a/configs/at91sam9261ek_ext_defconfig
+++ b/configs/at91sam9261ek_ext_defconfig
@@ -861,6 +861,7 @@ BR2_PACKAGE_LIBXSLT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9263ek_defconfig b/configs/at91sam9263ek_defconfig
index cdbeaa3..a670b41 100644
--- a/configs/at91sam9263ek_defconfig
+++ b/configs/at91sam9263ek_defconfig
@@ -901,6 +901,7 @@ BR2_PACKAGE_LIBXSLT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9263ek_ext_bare_defconfig b/configs/at91sam9263ek_ext_bare_defconfig
index 3e57789..bc6f626 100644
--- a/configs/at91sam9263ek_ext_bare_defconfig
+++ b/configs/at91sam9263ek_ext_bare_defconfig
@@ -637,6 +637,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91sam9263ek_ext_defconfig b/configs/at91sam9263ek_ext_defconfig
index 944811f..4a59ea6 100644
--- a/configs/at91sam9263ek_ext_defconfig
+++ b/configs/at91sam9263ek_ext_defconfig
@@ -823,6 +823,7 @@ BR2_PACKAGE_LIBXSLT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9g20dfc_defconfig b/configs/at91sam9g20dfc_defconfig
index 710639b..a57dcff 100644
--- a/configs/at91sam9g20dfc_defconfig
+++ b/configs/at91sam9g20dfc_defconfig
@@ -769,6 +769,7 @@ BR2_PACKAGE_EXPAT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/at91sam9g20dfc_ext_bare_defconfig b/configs/at91sam9g20dfc_ext_bare_defconfig
index 4db69f3..3977dc9 100644
--- a/configs/at91sam9g20dfc_ext_bare_defconfig
+++ b/configs/at91sam9g20dfc_ext_bare_defconfig
@@ -635,6 +635,7 @@ BR2_PACKAGE_XSERVER_none=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/at91sam9g20dfc_ext_defconfig b/configs/at91sam9g20dfc_ext_defconfig
index a2f34a2..632f2d1 100644
--- a/configs/at91sam9g20dfc_ext_defconfig
+++ b/configs/at91sam9g20dfc_ext_defconfig
@@ -773,6 +773,7 @@ BR2_PACKAGE_LIBXML2=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/root/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/atngw100-base_defconfig b/configs/atngw100-base_defconfig
index cd5a676..15d779a 100644
--- a/configs/atngw100-base_defconfig
+++ b/configs/atngw100-base_defconfig
@@ -698,6 +698,7 @@ BR2_ROOTFS_SUFFIX="$(DATE)"
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/atngw100-base/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/atngw100_defconfig b/configs/atngw100_defconfig
index 367bcdc..ecaf774 100644
--- a/configs/atngw100_defconfig
+++ b/configs/atngw100_defconfig
@@ -688,6 +688,7 @@ BR2_ROOTFS_SUFFIX="$(DATE)"
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/atngw100/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/atstk1005_defconfig b/configs/atstk1005_defconfig
index 50e013e..6b7a7b6 100644
--- a/configs/atstk1005_defconfig
+++ b/configs/atstk1005_defconfig
@@ -731,6 +731,7 @@ BR2_PACKAGE_ZLIB=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/atstk1005/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/atstk100x_defconfig b/configs/atstk100x_defconfig
index df30b05..1a27f1a 100644
--- a/configs/atstk100x_defconfig
+++ b/configs/atstk100x_defconfig
@@ -834,6 +834,7 @@ BR2_ROOTFS_SUFFIX="$(DATE)"
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/Atmel/atstk100x/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
diff --git a/configs/kb9202_defconfig b/configs/kb9202_defconfig
index b1ec323..e66348b 100644
--- a/configs/kb9202_defconfig
+++ b/configs/kb9202_defconfig
@@ -654,6 +654,7 @@ BR2_GAMES=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/KwikByte/kb9202/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/configs/v100sc2_defconfig b/configs/v100sc2_defconfig
index 309b80e..b139c27 100644
--- a/configs/v100sc2_defconfig
+++ b/configs/v100sc2_defconfig
@@ -685,6 +685,7 @@ BR2_PACKAGE_LIBXSLT=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/valka/device_table.txt"
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
diff --git a/target/xtensa/defconfig b/target/xtensa/defconfig
index f03f7a6..49b7eb3 100644
--- a/target/xtensa/defconfig
+++ b/target/xtensa/defconfig
@@ -104,6 +104,7 @@ BR2_PACKAGE_PORTMAP=y
#
# filesystem for target device
#
+BR2_ROOTFS_DEVICE_TABLE="target/device/xtensa/device_table.txt"
BR2_TARGET_ROOTFS_CPIO=y
BR2_TARGET_ROOTFS_CPIO_GZIP=y
BR2_TARGET_ROOTFS_INITRAMFS=y
--
1.6.3.3
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions
2010-04-17 4:02 ` [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions Thomas Petazzoni
@ 2010-04-17 4:23 ` Marc Gauthier
0 siblings, 0 replies; 9+ messages in thread
From: Marc Gauthier @ 2010-04-17 4:23 UTC (permalink / raw)
To: buildroot
Hi Thomas,
Thanks for catching. (Darn, didn't want to maintain that table.
We're a bit behind on cleanup...)
-Marc
Thomas Petazzoni wrote:
> We have a special case for Xtensa, which was patching the generic
> device_table.txt. Instead of doing this, we just keep a copy of the
> device table, specific to Xtensa, with Xtensa specifities. The fact
> that the patch wasn't applying anymore on the generic device table is
> a sign that the existing approach wasn't working anyway.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> target/device/Atmel/Makefile.in | 1 -
> target/device/Atmel/atngw100-base/Makefile.in | 1 -
> target/device/Atmel/atngw100/Makefile.in | 1 -
> target/device/Atmel/atstk1005/Makefile.in | 1 -
> target/device/Atmel/atstk100x/Makefile.in | 1 -
> target/device/KwikByte/kb9202/Makefile.in | 1 -
> target/device/valka/Makefile.in | 2 -
> target/device/xtensa/Makefile.in | 8 -
> target/device/xtensa/device_table.diff | 10 --
> target/device/xtensa/device_table.txt | 189
> +++++++++++++++++++++++++ target/generic/Makefile.in
> | 2 - 11 files changed, 189 insertions(+), 28 deletions(-)
> delete mode 100644 target/device/xtensa/device_table.diff
> create mode 100644 target/device/xtensa/device_table.txt
>
> diff --git a/target/device/Atmel/Makefile.in
> b/target/device/Atmel/Makefile.in
> index bf7a2d1..c5dfffd 100644
> --- a/target/device/Atmel/Makefile.in
> +++ b/target/device/Atmel/Makefile.in
> @@ -8,7 +8,6 @@ BOARD_PATH:=$(call qstrip,$(BR2_BOARD_PATH))
>
> ATMEL_TARGET:=$(ATMEL_PATH)/root
> TARGET_SKELETON:=$(ATMEL_TARGET)/target_skeleton
> -TARGET_DEVICE_TABLE:=$(ATMEL_TARGET)/device_table.txt
> TARGET_SKELETON_LINKS:=$(ATMEL_TARGET)/skel.tar.gz
>
> ifeq ($(BR2_avr32),y)
> diff --git a/target/device/Atmel/atngw100-base/Makefile.in
> b/target/device/Atmel/atngw100-base/Makefile.in index
> 467951f..c2f2969 100644 ---
> a/target/device/Atmel/atngw100-base/Makefile.in +++
> b/target/device/Atmel/atngw100-base/Makefile.in @@ -1,5 +1,4 @@
> ifeq ($(BR2_TARGET_AVR32_ATNGW100_BASE),y)
> UBOOT_BOARD_NAME:=atngw100
> TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
> endif
> diff --git a/target/device/Atmel/atngw100/Makefile.in
> b/target/device/Atmel/atngw100/Makefile.in
> index 3c34d8d..7e02d8e 100644
> --- a/target/device/Atmel/atngw100/Makefile.in
> +++ b/target/device/Atmel/atngw100/Makefile.in
> @@ -1,5 +1,4 @@
> ifeq ($(BR2_TARGET_AVR32_ATNGW100),y)
> UBOOT_BOARD_NAME:=atngw100
> TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
> endif
> diff --git a/target/device/Atmel/atstk1005/Makefile.in
> b/target/device/Atmel/atstk1005/Makefile.in
> index 4c3aadf..84b3107 100644
> --- a/target/device/Atmel/atstk1005/Makefile.in
> +++ b/target/device/Atmel/atstk1005/Makefile.in
> @@ -1,4 +1,3 @@
> ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1005)),y)
> TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
> endif
> diff --git a/target/device/Atmel/atstk100x/Makefile.in
> b/target/device/Atmel/atstk100x/Makefile.in
> index e9dd4dc..395c74a 100644
> --- a/target/device/Atmel/atstk100x/Makefile.in
> +++ b/target/device/Atmel/atstk100x/Makefile.in
> @@ -1,5 +1,4 @@
> ifeq ($(strip $(BR2_TARGET_AVR32_ATSTK1002)),y)
> UBOOT_BOARD_NAME:=atstk1002
> TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
> endif
> diff --git a/target/device/KwikByte/kb9202/Makefile.in
> b/target/device/KwikByte/kb9202/Makefile.in
> index 5d743ce..0048dcc 100644
> --- a/target/device/KwikByte/kb9202/Makefile.in
> +++ b/target/device/KwikByte/kb9202/Makefile.in
> @@ -1,4 +1,3 @@
> BOARD_PATH=target/device/KwikByte/kb9202
>
> TARGET_SKELETON=$(BOARD_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(BOARD_PATH)/device_table.txt
> diff --git a/target/device/valka/Makefile.in
> b/target/device/valka/Makefile.in
> index 0142246..fec4d88 100644
> --- a/target/device/valka/Makefile.in
> +++ b/target/device/valka/Makefile.in
> @@ -2,7 +2,6 @@ ifeq ($(BR2_TARGET_VALKA),y)
> VALKA_PATH= target/device/valka
>
> TARGET_SKELETON=$(VALKA_PATH)/target_skeleton
> -TARGET_DEVICE_TABLE=$(VALKA_PATH)/device_table.txt
> KERNEL_HEADERS_PATCH_DIR=target/device/Atmel/arch-avr32/kernel-headers-2.6.28.2
>
> valka_status:
> @@ -10,7 +9,6 @@ valka_status:
> @echo VALKA_PATH = $(VALKA_PATH)
> @echo BOARD_NAME = $(BR_BOARD_NAME)
> @echo TARGET_SKELETON = $(TARGET_SKELETON)
> - @echo TARGET_DEVICE_TABLE = $(TARGET_DEVICE_TABLE)
> @echo BR2_PACKAGE_BUSYBOX_CONFIG = $(BR2_PACKAGE_BUSYBOX_CONFIG)
> @echo BR2_PACKAGE_LINUX_KCONFIG = $(BR2_PACKAGE_LINUX_KCONFIG)
> @echo
> "*****************************************************************"
> diff --git a/target/device/xtensa/Makefile.in
> b/target/device/xtensa/Makefile.in
> index 7c95c23..f878a82 100644
> --- a/target/device/xtensa/Makefile.in
> +++ b/target/device/xtensa/Makefile.in
> @@ -6,12 +6,4 @@ ifeq ($(strip $(BR2_TARGET_XTENSA_XTAV60)),y)
> TARGET_SKELETON_PATCH:=target/device/xtensa
> endif
>
> -# Custom device table patch used when targeting ISS:
> -OLD_TARGET_DEVICE_TABLE := $(TARGET_DEVICE_TABLE)
> -TARGET_DEVICE_TABLE := target/device/xtensa/device_table.txt
> -makedevs:
> - @echo "Applying patch to $(TARGET_DEVICE_TABLE)"
> - cp -f $(OLD_TARGET_DEVICE_TABLE) $(TARGET_DEVICE_TABLE)
> - patch -p1 -g 0 < target/device/xtensa/device_table.diff
> -
> endif
> diff --git a/target/device/xtensa/device_table.diff
> b/target/device/xtensa/device_table.diff
> deleted file mode 100644
> index 12f6825..0000000
> --- a/target/device/xtensa/device_table.diff
> +++ /dev/null
> @@ -1,10 +0,0 @@
> -diff --git a/target/generic/device_table.txt
> b/target/generic/device_table.txt
> -index f4b16ba..b87bf69 100644
> ---- a/target/device/xtensa/device_table.txt
> -+++ b/target/device/xtensa/device_table.txt
> -@@ -169,3 +169,5 @@
> - #/dev/mcd b 640 0 0 23 0 0
> 0
> - #/dev/optcd b 640 0 0 17 0 0
> 0 -
> -+/dev/simdisk0 b 640 0 0 240 0
> 0 0
> -+/dev/simdisk1 b 640 0 0 240 1
> 0 0
> diff --git a/target/device/xtensa/device_table.txt
> b/target/device/xtensa/device_table.txt
> new file mode 100644
> index 0000000..d0c7467
> --- /dev/null
> +++ b/target/device/xtensa/device_table.txt
> @@ -0,0 +1,189 @@
> +# When building a target filesystem, it is desirable to not have to
> +# become root and then run 'mknod' a thousand times. Using a device
> +# table you can create device nodes and directories "on the fly".
> +#
> +# This is a sample device table file for use with genext2fs. You can
> +# do all sorts of interesting things with a device table file. For
> +# example, if you want to adjust the permissions on a particular file
> +# you can just add an entry like:
> +# /sbin/foobar f 2755 0 0 - -
> - - - +# and (assuming the file /sbin/foobar exists) it
> will be made setuid +# root (regardless of what its permissions are
> on the host filesystem. +# Furthermore, you can use a single table
> entry to create a many device +# minors. For example, if I wanted to
> create /dev/hda and /dev/hda[0-15] +# I could just use the following
> two table entries: +# /dev/hda b 640 0 0 3
> 0 0 0 - +# /dev/hda b 640 0 0
> 3 1 1 1 15 +#
> +# Device table entries take the form of:
> +# <name> <type> <mode> <uid> <gid> <major> <minor>
> <start> <inc> <count> +# where name is the file name, type can be
> one of: +# f A regular file
> +# d Directory
> +# c Character special device file
> +# b Block special device file
> +# p Fifo (named pipe)
> +# uid is the user id for the target file, gid is the group id for the
> +# target file. The rest of the entries (major, minor, etc) apply
> only +# to device special files.
> +
> +# Have fun
> +# -Erik Andersen <andersen@codepoet.org>
> +#
> +
> +#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
> +/dev d 755 0 0 - - - - -
> +/dev/pts d 755 0 0 - - - - -
> +/dev/shm d 755 0 0 - - - - -
> +/tmp d 1777 0 0 - - - - -
> +/etc d 755 0 0 - - - - -
> +/home/default d 2755 1000 1000 - - - - -
> +#<name> <type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>
> +/bin/busybox f 4755 0 0 - - - - -
> +/etc/shadow f 600 0 0 - - - - -
> +/etc/passwd f 644 0 0 - - - - -
> +/etc/network/if-up.d d 755 0 0 - - - - -
> +/etc/network/if-pre-up.d d 755 0 0 - - - - -
> +/etc/network/if-down.d d 755 0 0 - - - - -
> +/etc/network/if-post-down.d d 755 0 0 - - - - -
> +/usr/share/udhcpc/default.script f 755 0 0 - - - - -
> +# uncomment this to allow starting x as non-root
> +#/usr/X11R6/bin/Xfbdev f 4755 0 0 - - - - -
> +# Normal system devices
> +/dev/mem c 640 0 0 1 1 0 0 -
> +/dev/kmem c 640 0 0 1 2 0 0 -
> +/dev/null c 666 0 0 1 3 0 0 -
> +/dev/zero c 666 0 0 1 5 0 0 -
> +/dev/random c 666 0 0 1 8 0 0 -
> +/dev/urandom c 666 0 0 1 9 0 0 -
> +/dev/ram b 640 0 0 1 1 0 0 -
> +/dev/ram b 640 0 0 1 0 0 1 4
> +/dev/loop b 640 0 0 7 0 0 1 2
> +/dev/rtc c 640 0 0 10 135 - - -
> +/dev/console c 666 0 0 5 1 - - -
> +/dev/tty c 666 0 0 5 0 - - -
> +/dev/tty c 666 0 0 4 0 0 1 8
> +/dev/ttyp c 666 0 0 3 0 0 1 10
> +/dev/ptyp c 666 0 0 2 0 0 1
> 10 +/dev/ptmx c 666 0 0 5 2 - - -
> +/dev/ttyP c 666 0 0 57 0 0 1 4
> +/dev/ttyS c 666 0 0 4 64 0 1 4
> +/dev/fb c 640 0 5 29 0 0 1 4
> +#/dev/ttySA c 666 0 0 204 5 0 1 3
> +/dev/psaux c 666 0 0 10 1 0 0 -
> +#/dev/ppp c 666 0 0 108 0 - - -
> +/dev/ttyCPM c 666 0 0 204 46 0 1 4
> +/dev/ttyAMA c 666 0 0 204 64 0 1 4
> +/dev/ttySAC c 666 0 0 204 64 0 1 4
> +/dev/ttyPSC c 666 0 0 204 148 0 1 4
> +/dev/ttyUL c 666 0 0 204 187 0 1 4
> +/dev/ttymxc c 666 0 0 207 16 0 1 3
> +
> +# Input stuff
> +/dev/input d 755 0 0 - - - - -
> +/dev/input/mice c 640 0 0 13 63 0 0 -
> +/dev/input/mouse c 660 0 0 13 32 0 1 4
> +/dev/input/event c 660 0 0 13 64 0 1 4
> +#/dev/input/js c 660 0 0 13 0 0 1 4
> +
> +
> +# MTD stuff
> +/dev/mtd c 640 0 0 90 0 0 2 4
> +/dev/mtdblock b 640 0 0 31 0 0 1 4
> +
> +#Tun/tap driver
> +/dev/net d 755 0 0 - - - - -
> +/dev/net/tun c 660 0 0 10 200 - - -
> +
> +# Audio stuff
> +#/dev/audio c 666 0 29 14 4 - - -
> +#/dev/audio1 c 666 0 29 14 20 - - -
> +#/dev/dsp c 666 0 29 14 3 - - -
> +#/dev/dsp1 c 666 0 29 14 19 - - -
> +#/dev/sndstat c 666 0 29 14 6 - - -
> +
> +# User-mode Linux stuff
> +#/dev/ubda b 640 0 0 98 0 0 0 -
> +#/dev/ubda b 640 0 0 98 1 1 1 15
> +
> +# IDE Devices
> +/dev/hda b 640 0 0 3 0 0 0 -
> +/dev/hda b 640 0 0 3 1 1 1 15
> +/dev/hdb b 640 0 0 3 64 0 0 -
> +/dev/hdb b 640 0 0 3 65 1 1 15
> +#/dev/hdc b 640 0 0 22 0 0 0 -
> +#/dev/hdc b 640 0 0 22 1 1 1 15
> +#/dev/hdd b 640 0 0 22 64 0 0 -
> +#/dev/hdd b 640 0 0 22 65 1 1 15
> +#/dev/hde b 640 0 0 33 0 0 0 -
> +#/dev/hde b 640 0 0 33 1 1 1 15
> +#/dev/hdf b 640 0 0 33 64 0 0 -
> +#/dev/hdf b 640 0 0 33 65 1 1 15
> +#/dev/hdg b 640 0 0 34 0 0 0 -
> +#/dev/hdg b 640 0 0 34 1 1 1 15
> +#/dev/hdh b 640 0 0 34 64 0 0 -
> +#/dev/hdh b 640 0 0 34 65 1 1 15
> +
> +# SCSI Devices
> +/dev/sda b 640 0 0 8 0 0 0 -
> +/dev/sda b 640 0 0 8 1 1 1 15
> +/dev/sdb b 640 0 0 8 16 0 0 -
> +/dev/sdb b 640 0 0 8 17 1 1 15
> +#/dev/sdc b 640 0 0 8 32 0 0 -
> +#/dev/sdc b 640 0 0 8 33 1 1 15
> +#/dev/sdd b 640 0 0 8 48 0 0 -
> +#/dev/sdd b 640 0 0 8 49 1 1 15
> +#/dev/sde b 640 0 0 8 64 0 0 -
> +#/dev/sde b 640 0 0 8 65 1 1 15
> +#/dev/sdf b 640 0 0 8 80 0 0 -
> +#/dev/sdf b 640 0 0 8 81 1 1 15
> +#/dev/sdg b 640 0 0 8 96 0 0 -
> +#/dev/sdg b 640 0 0 8 97 1 1 15
> +#/dev/sdh b 640 0 0 8 112 0 0 -
> +#/dev/sdh b 640 0 0 8 113 1 1 15
> +#/dev/sg c 640 0 0 21 0 0 1 15
> +#/dev/scd b 640 0 0 11 0 0 1 15
> +#/dev/st c 640 0 0 9 0 0 1 8
> +#/dev/nst c 640 0 0 9 128 0 1 8
> +#/dev/st c 640 0 0 9 32 1 1 4
> +#/dev/st c 640 0 0 9 64 1 1 4
> +#/dev/st c 640 0 0 9 96 1 1 4
> +
> +# USB block devices (ub driver)
> +/dev/uba b 640 0 0 180 0 0 0 -
> +/dev/uba b 640 0 0 180 1 1 1 6
> +/dev/ubb b 640 0 0 180 8 0 0 -
> +/dev/ubb b 640 0 0 180 65 1 1 6
> +
> +# Floppy disk devices
> +#/dev/fd b 640 0 0 2 0 0 1 2
> +#/dev/fd0d360 b 640 0 0 2 4 0 0 -
> +#/dev/fd1d360 b 640 0 0 2 5 0 0 -
> +#/dev/fd0h1200 b 640 0 0 2 8 0 0 -
> +#/dev/fd1h1200 b 640 0 0 2 9 0 0 -
> +#/dev/fd0u1440 b 640 0 0 2 28 0 0 -
> +#/dev/fd1u1440 b 640 0 0 2 29 0 0 -
> +#/dev/fd0u2880 b 640 0 0 2 32 0 0 -
> +#/dev/fd1u2880 b 640 0 0 2 33 0 0 -
> +
> +# All the proprietary cdrom devices in the world
> +#/dev/aztcd b 640 0 0 29 0 0 0 -
> +#/dev/bpcd b 640 0 0 41 0 0 0 -
> +#/dev/capi20 c 640 0 0 68 0 0 1 2
> +#/dev/cdu31a b 640 0 0 15 0 0 0 -
> +#/dev/cdu535 b 640 0 0 24 0 0 0 -
> +#/dev/cm206cd b 640 0 0 32 0 0 0 -
> +#/dev/sjcd b 640 0 0 18 0 0 0 -
> +#/dev/sonycd b 640 0 0 15 0 0 0 -
> +#/dev/gscd b 640 0 0 16 0 0 0 -
> +#/dev/sbpcd b 640 0 0 25 0 0 0 -
> +#/dev/sbpcd b 640 0 0 25 0 0 1 4
> +#/dev/mcd b 640 0 0 23 0 0 0 -
> +#/dev/optcd b 640 0 0 17 0 0 0 -
> +
> +# I2C device nodes
> +/dev/i2c- c 666 0 0 89 0 0 1 4
> +
> +# Xtensa special devices
> +/dev/simdisk0 b 640 0 0 240 0
> 0 0 +/dev/simdisk1 b 640 0 0 240
> 1 0 0
> diff --git a/target/generic/Makefile.in b/target/generic/Makefile.in
> index f77f969..9a56f76 100644
> --- a/target/generic/Makefile.in
> +++ b/target/generic/Makefile.in
> @@ -1,10 +1,8 @@
> # Default target skeleton stuff, may be overridden
> TARGET_SKELETON=target/generic/target_skeleton
> -TARGET_DEVICE_TABLE=target/generic/device_table.txt
>
> ifeq ($(BR2_PACKAGE_BUSYBOX_SKELETON),y)
> TARGET_SKELETON=target/generic/target_busybox_skeleton
> -TARGET_DEVICE_TABLE=target/generic/mini_device_table.txt
> endif
>
> TARGET_GENERIC_HOSTNAME:=$(call
> qstrip,$(BR2_TARGET_GENERIC_HOSTNAME))
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Buildroot] [pull request] Pull request for branch fs-fixes
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
` (5 preceding siblings ...)
2010-04-17 4:02 ` [Buildroot] [PATCH 6/6] Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definition Thomas Petazzoni
@ 2010-04-18 20:32 ` Peter Korsgaard
6 siblings, 0 replies; 9+ messages in thread
From: Peter Korsgaard @ 2010-04-18 20:32 UTC (permalink / raw)
To: buildroot
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> Hello,
Thomas> Here is the fix for bug #1537, i.e "device entries no longer
Thomas> created". It is a severe regression introduced by my filesystem
Thomas> cleanup code. The problem was that the TARGET_DEVICE_TABLE variable
Thomas> was no longer defined.
Thomas> To fix it, I took the approach I intend to take to cleanup the rest of
Thomas> target/, i.e use normal configuration options instead of variables
Thomas> defined in board-specific Makefiles.
Thomas> Therefore, I've added a new BR2_ROOTFS_DEVICE_TABLE option, which
Thomas> contains the path to the device table that should be used.
Pulled and pushed, thanks!
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-04-18 20:32 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-17 4:02 [Buildroot] [pull request] Pull request for branch fs-fixes Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 1/6] cramfs: fix installation Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 2/6] fs: change the way the device table is configured Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 3/6] cramfs/jffs2: use the new ROOTFS_DEVICE_TABLE variable Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 4/6] documentation: update after TARGET_DEVICE_TABLE removal Thomas Petazzoni
2010-04-17 4:02 ` [Buildroot] [PATCH 5/6] Remove all TARGET_DEVICE_TABLE definitions Thomas Petazzoni
2010-04-17 4:23 ` Marc Gauthier
2010-04-17 4:02 ` [Buildroot] [PATCH 6/6] Update defconfigs to include BR2_ROOTFS_DEVICE_TABLE definition Thomas Petazzoni
2010-04-18 20:32 ` [Buildroot] [pull request] Pull request for branch fs-fixes Peter Korsgaard
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox