* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-23 16:56 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-23 16:56 UTC (permalink / raw)
To: buildroot
The following issue has been SUBMITTED.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-23-2007 09:56 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-23 16:58 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-23 16:58 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-23-2007 09:58 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-23 18:39 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-23 18:39 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-23-2007 11:39 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-23 19:58 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-23 19:58 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-23-2007 12:58 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
----------------------------------------------------------------------
APOLAUF - 09-23-07 12:58
----------------------------------------------------------------------
So what can I do to get this to compile? I need gcj support or a JVM to run
on my busybox build. And I don't have room to statically link GCJ with
glibc (47MB for a hello world app). Is there any toolchain that I can use
to build gcj cross-compiling support with static linking against uClibc?
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
09-23-07 12:58 APOLAUF Note Added: 0002769
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-23 20:21 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-23 20:21 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-23-2007 13:21 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
----------------------------------------------------------------------
APOLAUF - 09-23-07 12:58
----------------------------------------------------------------------
So what can I do to get this to compile? I need gcj support or a JVM to run
on my busybox build. And I don't have room to statically link GCJ with
glibc (47MB for a hello world app). Is there any toolchain that I can use
to build gcj cross-compiling support with static linking against uClibc?
----------------------------------------------------------------------
bernhardf - 09-23-07 13:21
----------------------------------------------------------------------
I only tested C, fortran, c++ and those work as expected as far as i'm
concerned.
I don't do java (never did and will most likely never do), so please feel
free to send in patches.
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
09-23-07 12:58 APOLAUF Note Added: 0002769
09-23-07 13:21 bernhardf Note Added: 0002770
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-24 14:21 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-24 14:21 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-24-2007 07:21 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
----------------------------------------------------------------------
APOLAUF - 09-23-07 12:58
----------------------------------------------------------------------
So what can I do to get this to compile? I need gcj support or a JVM to run
on my busybox build. And I don't have room to statically link GCJ with
glibc (47MB for a hello world app). Is there any toolchain that I can use
to build gcj cross-compiling support with static linking against uClibc?
----------------------------------------------------------------------
bernhardf - 09-23-07 13:21
----------------------------------------------------------------------
I only tested C, fortran, c++ and those work as expected as far as i'm
concerned.
I don't do java (never did and will most likely never do), so please feel
free to send in patches.
----------------------------------------------------------------------
APOLAUF - 09-24-07 07:21
----------------------------------------------------------------------
I disabled GCJ support, enabling only C++, but it still fails with the
exact same error. What can be done?
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
09-23-07 12:58 APOLAUF Note Added: 0002769
09-23-07 13:21 bernhardf Note Added: 0002770
09-24-07 07:21 APOLAUF Note Added: 0002789
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-24 16:55 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-24 16:55 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-24-2007 09:55 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
----------------------------------------------------------------------
APOLAUF - 09-23-07 12:58
----------------------------------------------------------------------
So what can I do to get this to compile? I need gcj support or a JVM to run
on my busybox build. And I don't have room to statically link GCJ with
glibc (47MB for a hello world app). Is there any toolchain that I can use
to build gcj cross-compiling support with static linking against uClibc?
----------------------------------------------------------------------
bernhardf - 09-23-07 13:21
----------------------------------------------------------------------
I only tested C, fortran, c++ and those work as expected as far as i'm
concerned.
I don't do java (never did and will most likely never do), so please feel
free to send in patches.
----------------------------------------------------------------------
APOLAUF - 09-24-07 07:21
----------------------------------------------------------------------
I disabled GCJ support, enabling only C++, but it still fails with the
exact same error. What can be done?
----------------------------------------------------------------------
bernhardf - 09-24-07 09:55
----------------------------------------------------------------------
please attach your buildroot .config and your uclibc .config (or let me
know if you used a standard one). I'll try to reproduce this locally.
thanks,
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
09-23-07 12:58 APOLAUF Note Added: 0002769
09-23-07 13:21 bernhardf Note Added: 0002770
09-24-07 07:21 APOLAUF Note Added: 0002789
09-24-07 09:55 bernhardf Note Added: 0002790
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
* [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build
@ 2007-09-25 0:53 bugs at busybox.net
0 siblings, 0 replies; 8+ messages in thread
From: bugs at busybox.net @ 2007-09-25 0:53 UTC (permalink / raw)
To: buildroot
A NOTE has been added to this issue.
======================================================================
http://busybox.net/bugs/view.php?id=1507
======================================================================
Reported By: APOLAUF
Assigned To: buildroot
======================================================================
Project: buildroot
Issue ID: 1507
Category: Architecture Specific
Reproducibility: always
Severity: major
Priority: normal
Status: assigned
======================================================================
Date Submitted: 09-23-2007 09:56 PDT
Last Modified: 09-24-2007 17:53 PDT
======================================================================
Summary: Build fails for ARM920T, c++ compiler/gcj build
Description:
When attempting to build toolchain for ARM920t, with "Build/install c++
compiler and libsdc++" option and "build/install java compiler and
libgcj", the following error shows up no matter what distro I use (Fedora,
Debian, Gentoo, etc.):
)
# Now for the ugly 3.3.x soft float hack...
#
#
# Ok... that's enough of that. ft
mkdir -p /root/buildroot/project_build_arm/uclibc/root/usr/lib
/root/buildroot/pro ject_build_arm/uclibc/root/usr/sbin
touch /root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.installed
# These are in /lib, so ...
rm -rf /root/bui
Idroot/project_build_arm/uclibc/root/usr/lib/libgcc_s*.so*
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libgcc_s*
\
/root/buildroot/project_build_arm/uclibc/root/lib/
cp -dpf
/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/libstdc++
/root/buildroot/project_build_arm/uclibc/root/usr/lib/
cp : cannot stat
?/root/buildroot/build_arm/staging_dir/usr/arm-linux-uclibc/lib/l
ibstdc++.so*? : Mo such file or directory
make : ***
[/root/buildroot/toolchain_build_arm/gcc-4.2.1-final/.libs_installed]
Error 1
I must have Java support on my toolchain, and this failure to compile
makes things very frustrating. I saw something similar on these boards,
with the response being ~"fix your headers.", and stating that Gentoo had
correct headers. I'm using Gentoo, and it's apparently not helping. Please
help. Thanks,
-Adrian
======================================================================
----------------------------------------------------------------------
APOLAUF - 09-23-07 09:58
----------------------------------------------------------------------
the "ft" after "#Ok... that's enough of that" is my OCR software
incorrectly identifying the # symbol. I'm running this in a VM, and didn't
feel like piping the output over, so there may be a recognition error or
two. I took care to correct the rest of the output.
----------------------------------------------------------------------
UlfSamuelsson - 09-23-07 11:39
----------------------------------------------------------------------
I have seen the same thing for the AVR32 build.
I traced it back to "configure" not beeing able to link.
This was because "crt1.o" was not found, when linking.
That disabled creating the *.so files.
I find this strange, since there is no crt1.asm in gcc
except for the SH architecture.
Did not have time to investigate further.
----------------------------------------------------------------------
APOLAUF - 09-23-07 12:58
----------------------------------------------------------------------
So what can I do to get this to compile? I need gcj support or a JVM to run
on my busybox build. And I don't have room to statically link GCJ with
glibc (47MB for a hello world app). Is there any toolchain that I can use
to build gcj cross-compiling support with static linking against uClibc?
----------------------------------------------------------------------
bernhardf - 09-23-07 13:21
----------------------------------------------------------------------
I only tested C, fortran, c++ and those work as expected as far as i'm
concerned.
I don't do java (never did and will most likely never do), so please feel
free to send in patches.
----------------------------------------------------------------------
APOLAUF - 09-24-07 07:21
----------------------------------------------------------------------
I disabled GCJ support, enabling only C++, but it still fails with the
exact same error. What can be done?
----------------------------------------------------------------------
bernhardf - 09-24-07 09:55
----------------------------------------------------------------------
please attach your buildroot .config and your uclibc .config (or let me
know if you used a standard one). I'll try to reproduce this locally.
thanks,
----------------------------------------------------------------------
APOLAUF - 09-24-07 17:53
----------------------------------------------------------------------
I've included the .config file that I used. I didn't modify anything as far
as uclibc config goes. The target is simply ARM 920T, though it fails
equally for "generic ARM." I've included "error.txt", which contains the
last instruction that "make" executes before it generates an error. Thanks
for taking a look.
-Adrian
Issue History
Date Modified Username Field Change
======================================================================
09-23-07 09:56 APOLAUF New Issue
09-23-07 09:56 APOLAUF Status new => assigned
09-23-07 09:56 APOLAUF Assigned To => buildroot
09-23-07 09:58 APOLAUF Note Added: 0002766
09-23-07 11:39 UlfSamuelsson Note Added: 0002767
09-23-07 12:58 APOLAUF Note Added: 0002769
09-23-07 13:21 bernhardf Note Added: 0002770
09-24-07 07:21 APOLAUF Note Added: 0002789
09-24-07 09:55 bernhardf Note Added: 0002790
09-24-07 17:52 APOLAUF File Added: .config
09-24-07 17:52 APOLAUF File Added: error.txt
09-24-07 17:53 APOLAUF Note Added: 0002795
======================================================================
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-09-25 0:53 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-23 16:56 [Buildroot] [buildroot 0001507]: Build fails for ARM920T, c++ compiler/gcj build bugs at busybox.net
-- strict thread matches above, loose matches on Subject: below --
2007-09-23 16:58 bugs at busybox.net
2007-09-23 18:39 bugs at busybox.net
2007-09-23 19:58 bugs at busybox.net
2007-09-23 20:21 bugs at busybox.net
2007-09-24 14:21 bugs at busybox.net
2007-09-24 16:55 bugs at busybox.net
2007-09-25 0:53 bugs at busybox.net
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox