* [Buildroot] Buildroot for ARM (big endian) and glibc support
@ 2006-10-17 9:27 Thomas Ostrowski
2006-10-17 11:25 ` Ulf Samuelsson
0 siblings, 1 reply; 4+ messages in thread
From: Thomas Ostrowski @ 2006-10-17 9:27 UTC (permalink / raw)
To: buildroot
Hi,
I've had Buildroot running on ARM Xscale big endian with Kernel 2.6.18
and uclibc.
Now I need to change the uclibc to glibc.
So how do I can manage to add glibc support to Buildroot ?
Is there an easy way to do it ?
Thanx
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Buildroot for ARM (big endian) and glibc support
2006-10-17 9:27 [Buildroot] Buildroot for ARM (big endian) and glibc support Thomas Ostrowski
@ 2006-10-17 11:25 ` Ulf Samuelsson
2006-11-01 13:53 ` MikeW
2006-11-01 16:05 ` MikeW
0 siblings, 2 replies; 4+ messages in thread
From: Ulf Samuelsson @ 2006-10-17 11:25 UTC (permalink / raw)
To: buildroot
----- Original Message -----
From: "Thomas Ostrowski" <tsostrow@iis.fhg.de>
To: <buildroot@uclibc.org>
Sent: Tuesday, October 17, 2006 11:27 AM
Subject: [Buildroot] Buildroot for ARM (big endian) and glibc support
> Hi,
>
> I've had Buildroot running on ARM Xscale big endian with Kernel 2.6.18
> and uclibc.
> Now I need to change the uclibc to glibc.
> So how do I can manage to add glibc support to Buildroot ?
> Is there an easy way to do it ?
>
> Thanx
You are better of with a distribution which supports glibc from the start like ptxdist..
www.pengutronix.com
Best Regards
Ulf Samuelsson
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Buildroot for ARM (big endian) and glibc support
2006-10-17 11:25 ` Ulf Samuelsson
@ 2006-11-01 13:53 ` MikeW
2006-11-01 16:05 ` MikeW
1 sibling, 0 replies; 4+ messages in thread
From: MikeW @ 2006-11-01 13:53 UTC (permalink / raw)
To: buildroot
Ulf Samuelsson <ulf@...> writes:
>
> You are better off with a distribution which supports glibc from the start
like ptxdist..
> www.pengutronix.com
>
> Best Regards
> Ulf Samuelsson
>
... but which does not support uclibc, which might make porting harder ...
(also documentation is sparse)
Regards,
MikeW
^ permalink raw reply [flat|nested] 4+ messages in thread
* [Buildroot] Buildroot for ARM (big endian) and glibc support
2006-10-17 11:25 ` Ulf Samuelsson
2006-11-01 13:53 ` MikeW
@ 2006-11-01 16:05 ` MikeW
1 sibling, 0 replies; 4+ messages in thread
From: MikeW @ 2006-11-01 16:05 UTC (permalink / raw)
To: buildroot
Ulf Samuelsson <ulf@...> writes:
> You are better of with a distribution which supports glibc from the start like
ptxdist..
> www.pengutronix.com
>
> Best Regards
> Ulf Samuelsson
>
I said that uclibc was not supported by PTXdist due to the following:
->>>
From: Robert Schwebel <r.schwebel@...>
Subject: Re: ucblic toolchain build
Newsgroups: gmane.comp.embedded.ptxdist.devel
Date: 2006-07-12 05:41:27 GMT (16 weeks, 10 hours and 13 minutes ago)
On Tue, Jul 11, 2006 at 08:31:04PM +0200, Alessandro Budai wrote:
> I'm trying to build a toolchain with uclibc but I've run into trouble,
> made small changes to rules/crosstool.make but stuck at a certain
> point
Note that uclibc is currently unsupported by PTXdist. We didn't manage
to port that old patches forward to the latest crosstool versions.
-<<<
Regards,
MikeW
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2006-11-01 16:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-10-17 9:27 [Buildroot] Buildroot for ARM (big endian) and glibc support Thomas Ostrowski
2006-10-17 11:25 ` Ulf Samuelsson
2006-11-01 13:53 ` MikeW
2006-11-01 16:05 ` MikeW
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox