* [Buildroot] Building libstdc++: "__ctype_touplow_t has incompatible type"
@ 2006-11-07 18:54 MikeW
2006-11-08 14:17 ` [Buildroot] Building libstdc++: will Buildroot build uClibc++ ? MikeW
0 siblings, 1 reply; 2+ messages in thread
From: MikeW @ 2006-11-07 18:54 UTC (permalink / raw)
To: buildroot
(Buildroot snapshot 2006-10-31)
Building gcc-3.4.x for ARM and enabling libstdc++ support I get the above error.
It is mentioned in the Mantis system (id 904) but the final note says it is not a
uClibc problem, and the issue is closed.
Presumably the patch should have been included with current versions of
Buildroot, but it has been omitted ?
Regards,
Mike
^ permalink raw reply [flat|nested] 2+ messages in thread
* [Buildroot] Building libstdc++: will Buildroot build uClibc++ ?
2006-11-07 18:54 [Buildroot] Building libstdc++: "__ctype_touplow_t has incompatible type" MikeW
@ 2006-11-08 14:17 ` MikeW
0 siblings, 0 replies; 2+ messages in thread
From: MikeW @ 2006-11-08 14:17 UTC (permalink / raw)
To: buildroot
MikeW <mw_phil@...> writes:
>
> (Buildroot snapshot 2006-10-31)
> Building gcc-3.4.x for ARM and enabling libstdc++ support I get
the above error.
>
> It is mentioned in the Mantis system (id 904) but the final note
says it is not a
> uClibc problem, and the issue is closed.
>
> Presumably the patch should have been included with current versions of
> Buildroot, but it has been omitted ?
>
> Regards,
> Mike
>
I note there is a uClibc C++ library, but apparently no Buildroot option
to build it - how should one enable build/use of this library in place of
libstdc++ ?
Thanks,
Mike
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-11-08 14:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-11-07 18:54 [Buildroot] Building libstdc++: "__ctype_touplow_t has incompatible type" MikeW
2006-11-08 14:17 ` [Buildroot] Building libstdc++: will Buildroot build uClibc++ ? MikeW
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox