* [Buildroot] [PATCH] pkg-download.mk: Fix shallow clone
From: Stephan Hoffmann @ 2012-12-06 10:59 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50C0432E.2080005@mind.be>
Am 06.12.2012 08:03, schrieb Arnout Vandecappelle:
> On 06/12/12 03:14, Danomi Manchego wrote:
>> So I'm wondering why the recent changes in this area used grep at
>> all, rather than asking ls-remote directly. I.e.:
>>
>> ((test `git ls-remote $($(PKG)_SITE) $($(PKG)_DL_VERSION) | cut -f
>> 2-` && \
>>
>> If there is feedback that the above is desirable, then I can send in
>> the patch.
>
> The argument of test should be quoted to avoid getting the same
> problem again
> when the ref matches more than once for some reason.
>
> Or even better: use the exit code:
>
> git ls-remote --exit-code $($(PKG)_SITE) $($(PKG)_DL_VERSION) >
> /dev/null 2>&1 && \
>
> (hopefully the --exit-code option exists in older gits as well...)
Hi,
sorry to say, but my git 1.7.0 does not know anything about a
--exit-code option and ls-remote always gives a exit code of 0 as long
as the repository can be connected.
Maybe its worth to think about adding a host-git to buildroot to
overcome such compatibility issues?
Kind regards
Stephan
>
> Regards,
> Arnout
>
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
^ permalink raw reply
* [Buildroot] [PATCH] pkg-download.mk: Fix shallow clone
From: Stephan Hoffmann @ 2012-12-06 10:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CANxTyt74ytgBNHb8koKuVTjei5sQP2FpUrwawMuG17=fAK3bXw@mail.gmail.com>
Am 06.12.2012 03:14, schrieb Danomi Manchego:
> Hi all,
>
> I ran into a minor problem with the shallow clone changes. The test
> for doing a git shallow clone uses a grep. From pkg-download.mk
> <http://pkg-download.mk>:
>
> ((test `git ls-remote $($(PKG)_SITE) | cut -f 2- | grep
> $($(PKG)_DL_VERSION)` && \
>
> If the grep returns multiple matches, then the "test" will fail, and
> then go on to do a full clone. The failure prints out:
>
> bash: test: too many arguments
>
> It's because the grep filter matches multiple items in the ls-remote
> output. For example, if you try to get your kernel from
> "http://arago-project.org/git/projects/linux-davinci.git", specifying
> a version of "03.22.00.02", then you will get two matches:
>
> $ git ls-remote
> http://arago-project.org/git/projects/linux-davinci.git | cut -f 2- |
> grep 03.22.00.02
> refs/heads/03.22.00.02 <http://03.22.00.02>
> refs/tags/DEV_DAVINCIPSP_03.22.00.02
>
> There are ways to massage the grep to do better (maybe use "grep -q",
> or grep for "/string$" instead of just "string"), but the ls-remote
> command seems to take a ref directly. I.e.
>
> $ git ls-remote
> http://arago-project.org/git/projects/linux-davinci.git 03.22.00.02 |
> cut -f 2-
> refs/heads/03.22.00.02 <http://03.22.00.02>
> $
> $ git ls-remote
> http://arago-project.org/git/projects/linux-davinci.git
> DEV_DAVINCIPSP_03.22.00.02 | cut -f 2-
> refs/tags/DEV_DAVINCIPSP_03.22.00.02
> $
> $ git ls-remote
> http://arago-project.org/git/projects/linux-davinci.git JUNK | cut -f 2-
> $
>
> So I'm wondering why the recent changes in this area used grep at all,
> rather than asking ls-remote directly. I.e.:
>
> ((test `git ls-remote $($(PKG)_SITE) $($(PKG)_DL_VERSION) | cut -f 2-`
> && \
Hello Danomi,
this is quite simple to answer: because I didn't find out this possibility.
>
> If there is feedback that the above is desirable, then I can send in
> the patch.
If you send a patch I am quite sure to be able to test it.
Kind regards
Stephan
>
> Danomi -
>
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121206/f6062f47/attachment.html>
^ permalink raw reply
* [Buildroot] [PATCH] make legal-info: fails with OVERRIDE_SRCDIR
From: Stephan Hoffmann @ 2012-12-06 10:26 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87y5hc8ffz.fsf@dell.be.48ers.dk>
Am 05.12.2012 20:30, schrieb Peter Korsgaard:
>>>>>> "Stephan" == Stephan Hoffmann <sho@relinux.de> writes:
> Stephan> There is a check for OVERRIDE_SRCDIR in pkg-generic.mk that is
> Stephan> supposed to produce a warning when OVERRIDE_SRCDIR is active.
> Stephan> This does not work and instead the whole make terminates with
> Stephan> an error message.
>
> Stephan> This patch changes the check for active OVERRIDE_SRCDIR so that
> Stephan> it works as expected.
>
> Committed, thanks.
>
Hi,
sorry, but I forgot that Arnout's patch
http://lists.busybox.net/pipermail/buildroot/2012-October/059910.html is
not yet applied. My patch does not work without this.
Kind regards
Stephan
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121206/040baca5/attachment.html>
^ permalink raw reply
* [Buildroot] buildroot-2012.11 openssh: Bad trap error
From: Jan Schunke @ 2012-12-06 9:59 UTC (permalink / raw)
To: buildroot
I am using buildroot-2012.11 on Powerpc 440 (Xilinx Virtex5) without FPU
when I boot I get:
...
Starting network...
Generating RSA Key...
[ 5.527467] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating RSA Key...
[ 5.572257] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating DSA Key...
THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
[ 5.594576] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Generating ECDSA Key...
THIS CAN TAKE A MINUTE OR TWO DEPENDING ON YOUR PROCESSOR!
[ 5.615732] Bad trap at PC: 48063f20, SR: 2d000, vector=2010
Trace/breakpoint trap
Starting sshd: [ 5.940254] Bad trap at PC: 48063f20, SR: 2d000,
vector=2010
Trace/breakpoint trap
OK
...
I can achieve a similar behaviour if I compile a program with -mhard-float.
So I guess for one of the following packages softfloat is not set correctly.
Maybe someone more competent can take a look into this.
When I roll back
openssh from 6.1p1 to 6.0p1
openssl from 1.0.1c to 1.0.0j
zlib from 1.27 to 1.26
everything is fine.
Regards
Jan
PS.: Here is my buildroot configuration
#
# Automatically generated make config: don't edit
# Buildroot 2012.11-hgf79de7c70d36-dirty Configuration
#
BR2_HAVE_DOT_CONFIG=y
# BR2_arm is not set
# BR2_armeb is not set
# BR2_aarch64 is not set
# BR2_avr32 is not set
# BR2_bfin is not set
# BR2_i386 is not set
# BR2_microblazeel is not set
# BR2_microblazebe is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_mips64 is not set
# BR2_mips64el is not set
BR2_powerpc=y
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
BR2_ARCH="powerpc"
BR2_ENDIAN="BIG"
BR2_GCC_TARGET_TUNE="440"
# BR2_generic_powerpc is not set
# BR2_powerpc_401 is not set
# BR2_powerpc_403 is not set
# BR2_powerpc_405 is not set
# BR2_powerpc_405fp is not set
BR2_powerpc_440=y
# BR2_powerpc_440fp is not set
# BR2_powerpc_505 is not set
# BR2_powerpc_601 is not set
# BR2_powerpc_602 is not set
# BR2_powerpc_603 is not set
# BR2_powerpc_603e is not set
# BR2_powerpc_604 is not set
# BR2_powerpc_604e is not set
# BR2_powerpc_620 is not set
# BR2_powerpc_630 is not set
# BR2_powerpc_740 is not set
# BR2_powerpc_7400 is not set
# BR2_powerpc_7450 is not set
# BR2_powerpc_750 is not set
# BR2_powerpc_801 is not set
# BR2_powerpc_821 is not set
# BR2_powerpc_823 is not set
# BR2_powerpc_860 is not set
# BR2_powerpc_970 is not set
# BR2_powerpc_8540 is not set
# BR2_powerpc_8548 is not set
# BR2_powerpc_e300c2 is not set
# BR2_powerpc_e300c3 is not set
# BR2_powerpc_e500mc is not set
BR2_powerpc_CLASSIC=y
#
# Build options
#
#
# Commands
#
BR2_WGET="wget --passive-ftp -nd -t 3"
BR2_SVN="svn"
BR2_BZR="bzr"
BR2_GIT="git"
BR2_LOCALFILES="cp"
BR2_SCP="scp"
BR2_SSH="ssh"
BR2_HG="hg"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_XZCAT="xzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_HOST_DIR="$(BASE_DIR)/host"
#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://sources.buildroot.net/"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_JLEVEL=0
BR2_CCACHE=y
BR2_CCACHE_DIR="$(HOME)/.buildroot-ccache"
# BR2_DEPRECATED is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
BR2_STRIP_EXCLUDE_FILES=""
BR2_STRIP_EXCLUDE_DIRS=""
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
BR2_PACKAGE_OVERRIDE_FILE="$(TOPDIR)/local.mk"
#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_CTNG is not set
#
# Kernel Header Options
#
BR2_KERNEL_HEADERS_3_0=y
# BR2_KERNEL_HEADERS_3_1 is not set
# BR2_KERNEL_HEADERS_3_2 is not set
# BR2_KERNEL_HEADERS_3_3 is not set
# BR2_KERNEL_HEADERS_3_4 is not set
# BR2_KERNEL_HEADERS_3_5 is not set
# BR2_KERNEL_HEADERS_3_6 is not set
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="3.0.53"
#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_31 is not set
# BR2_UCLIBC_VERSION_0_9_32 is not set
BR2_UCLIBC_VERSION_0_9_33=y
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.33.2"
BR2_UCLIBC_CONFIG="board/shf/shf1x104/uClibc-0.9.33.2.config"
BR2_PTHREAD_DEBUG=y
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set
#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_20_1 is not set
# BR2_BINUTILS_VERSION_2_21 is not set
# BR2_BINUTILS_VERSION_2_21_1 is not set
# BR2_BINUTILS_VERSION_2_22 is not set
BR2_BINUTILS_VERSION_2_23_1=y
BR2_BINUTILS_VERSION="2.23.1"
BR2_BINUTILS_EXTRA_CONFIG_OPTIONS=""
#
# GCC Options
#
# BR2_GCC_VERSION_4_3_X is not set
# BR2_GCC_VERSION_4_4_X is not set
# BR2_GCC_VERSION_4_5_X is not set
BR2_GCC_VERSION_4_6_X=y
# BR2_GCC_VERSION_4_7_X is not set
# BR2_GCC_VERSION_SNAP is not set
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.6.3"
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
BR2_GCC_ENABLE_TLS=y
# BR2_GCC_ENABLE_OPENMP is not set
#
# Gdb Options
#
BR2_PACKAGE_GDB=y
BR2_PACKAGE_GDB_SERVER=y
BR2_PACKAGE_GDB_HOST=y
# BR2_GDB_VERSION_7_2 is not set
# BR2_GDB_VERSION_7_3 is not set
BR2_GDB_VERSION_7_4=y
BR2_GDB_VERSION="7.4.1"
BR2_LARGEFILE=y
BR2_USE_WCHAR=y
BR2_INSTALL_LIBSTDCPP=y
BR2_TOOLCHAIN_HAS_THREADS=y
BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED=y
BR2_TOOLCHAIN_HAS_SHADOW_PASSWORDS=y
# BR2_ENABLE_LOCALE_PURGE is not set
BR2_GENERATE_LOCALE=""
BR2_NEEDS_GETTEXT=y
BR2_USE_MMU=y
BR2_SOFT_FLOAT=y
BR2_TARGET_OPTIMIZATION="-pipe -msoft-float"
BR2_TARGET_LDFLAGS=""
#
# Toolchain Options
#
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
# BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 is not set
# BR2_TOOLCHAIN_BUILDROOT_INET_RPC is not set
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
# BR2_TOOLCHAIN_BUILDROOT_LOCALE is not set
BR2_TOOLCHAIN_BUILDROOT_CXX=y
# BR2_TOOLCHAIN_BUILDROOT_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
# BR2_PTHREADS_OLD is not set
BR2_PTHREADS_NATIVE=y
#
# System configuration
#
BR2_TARGET_GENERIC_HOSTNAME="shf200g"
BR2_TARGET_GENERIC_ISSUE="Welcome to shf200g"
BR2_ROOTFS_DEVICE_CREATION_STATIC=y
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV is not set
# BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV is not set
BR2_INIT_BUSYBOX=y
# BR2_INIT_SYSV is not set
#
# systemd requires largefile, wchar, IPv6, threads and udev support
#
# BR2_INIT_NONE is not set
BR2_ROOTFS_DEVICE_TABLE="system/device_table.txt"
BR2_ROOTFS_STATIC_DEVICE_TABLE="system/device_table_dev.txt"
BR2_ROOTFS_SKELETON_DEFAULT=y
# BR2_ROOTFS_SKELETON_CUSTOM is not set
BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_KEEP is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_9600 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_19200 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_38400 is not set
# BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600 is not set
BR2_TARGET_GENERIC_GETTY_BAUDRATE_115200=y
BR2_TARGET_GENERIC_GETTY_BAUDRATE="115200"
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
BR2_ROOTFS_POST_BUILD_SCRIPT=""
#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_19_X is not set
BR2_BUSYBOX_VERSION_1_20_X=y
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.20.2"
BR2_PACKAGE_BUSYBOX_CONFIG="board/shf/shf1x104/busybox-1.20.1.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
# BR2_PACKAGE_BUSYBOX_WATCHDOG is not set
#
# Audio and video applications
#
# BR2_PACKAGE_ALSA_UTILS is not set
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_BELLAGIO is not set
# BR2_PACKAGE_FAAD2 is not set
# BR2_PACKAGE_FLAC is not set
#
# ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_GSTREAMER is not set
#
# gst-ffmpeg requires a toolchain with LARGEFILE and IPV6 support
#
# BR2_PACKAGE_LAME is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPD is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_MUSEPACK is not set
# BR2_PACKAGE_OPUS_TOOLS is not set
# BR2_PACKAGE_PULSEAUDIO is not set
# BR2_PACKAGE_VORBIS_TOOLS is not set
# BR2_PACKAGE_WAVPACK is not set
#
# Compressors and decompressors
#
BR2_PACKAGE_BZIP2=y
# BR2_PACKAGE_LZOP is not set
# BR2_PACKAGE_XZ is not set
#
# Debugging, profiling and benchmark
#
# BR2_PACKAGE_BONNIE is not set
# BR2_PACKAGE_DHRYSTONE is not set
# BR2_PACKAGE_DSTAT is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LATENCYTOP is not set
# BR2_PACKAGE_LMBENCH is not set
# BR2_PACKAGE_LTP_TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
BR2_PACKAGE_MEMSTAT=y
BR2_PACKAGE_NETPERF=y
# BR2_PACKAGE_OPROFILE is not set
# BR2_PACKAGE_RAMSPEED is not set
# BR2_PACKAGE_RT_TESTS is not set
BR2_PACKAGE_STRACE=y
# BR2_PACKAGE_STRESS is not set
# BR2_PACKAGE_SYSPROF is not set
# BR2_PACKAGE_WHETSTONE is not set
# BR2_PACKAGE_VALGRIND is not set
# BR2_PACKAGE_PV is not set
#
# Development tools
#
# BR2_PACKAGE_BINUTILS is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CCACHE is not set
# BR2_PACKAGE_CVS is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_GMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_MPC is not set
# BR2_PACKAGE_MPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set
# BR2_PACKAGE_PKGCONF is not set
# BR2_PACKAGE_SSTRIP is not set
# BR2_PACKAGE_VALA is not set
#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_PRBOOM is not set
#
# Graphic libraries and applications (graphic/text)
#
#
# Graphic applications
#
# BR2_PACKAGE_RRDTOOL is not set
#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_FBGRAB is not set
#
# fbterm requires a toolchain with C++, WCHAR and locale support
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FB_TEST_APP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_SDL is not set
#
# other GUIs
#
# BR2_PACKAGE_EFL is not set
# BR2_PACKAGE_QT is not set
# BR2_PACKAGE_XORG7 is not set
#
# X libraries and helper libraries
#
# BR2_PACKAGE_LIBERATION is not set
#
# X Window managers
#
#
# X applications
#
# BR2_PACKAGE_GOB2 is not set
#
# midori requires C++, WCHAR in toolchain and libgtk2
#
#
# Filesystem and flash utilities
#
# BR2_PACKAGE_CIFS_UTILS is not set
# BR2_PACKAGE_CRAMFS is not set
# BR2_PACKAGE_DOSFSTOOLS is not set
BR2_PACKAGE_E2FSPROGS=y
BR2_PACKAGE_E2FSPROGS_BADBLOCKS=y
# BR2_PACKAGE_E2FSPROGS_CHATTR is not set
# BR2_PACKAGE_E2FSPROGS_DEBUGFS is not set
# BR2_PACKAGE_E2FSPROGS_DUMPE2FS is not set
# BR2_PACKAGE_E2FSPROGS_E2FREEFRAG is not set
BR2_PACKAGE_E2FSPROGS_E2FSCK=y
# BR2_PACKAGE_E2FSPROGS_E2IMAGE is not set
BR2_PACKAGE_E2FSPROGS_E2LABEL=y
BR2_PACKAGE_E2FSPROGS_E2UNDO=y
# BR2_PACKAGE_E2FSPROGS_E4DEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_FILEFRAG is not set
# BR2_PACKAGE_E2FSPROGS_FINDFS is not set
# BR2_PACKAGE_E2FSPROGS_FSCK is not set
# BR2_PACKAGE_E2FSPROGS_LOGSAVE is not set
# BR2_PACKAGE_E2FSPROGS_LSATTR is not set
# BR2_PACKAGE_E2FSPROGS_MKE2FS is not set
# BR2_PACKAGE_E2FSPROGS_MKLOSTFOUND is not set
# BR2_PACKAGE_E2FSPROGS_RESIZE2FS is not set
BR2_PACKAGE_E2FSPROGS_TUNE2FS=y
# BR2_PACKAGE_E2FSPROGS_UUIDGEN is not set
# BR2_PACKAGE_GENEXT2FS is not set
# BR2_PACKAGE_GENROMFS is not set
# BR2_PACKAGE_MAKEDEVS is not set
# BR2_PACKAGE_MTD is not set
# BR2_PACKAGE_NFS_UTILS is not set
# BR2_PACKAGE_NTFS_3G is not set
# BR2_PACKAGE_SQUASHFS is not set
# BR2_PACKAGE_SSHFS is not set
# BR2_PACKAGE_UNIONFS is not set
# BR2_PACKAGE_XFSPROGS is not set
#
# Hardware handling
#
# BR2_PACKAGE_CDRKIT is not set
# BR2_PACKAGE_DBUS is not set
# BR2_PACKAGE_DMRAID is not set
BR2_PACKAGE_EEPROG=y
# BR2_PACKAGE_EVTEST is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set
# BR2_PACKAGE_FMTOOLS is not set
# BR2_PACKAGE_FXLOAD is not set
# BR2_PACKAGE_GADGETFS_TEST is not set
# BR2_PACKAGE_GDISK is not set
# BR2_PACKAGE_GPSD is not set
# BR2_PACKAGE_GVFS is not set
# BR2_PACKAGE_HWDATA is not set
BR2_PACKAGE_I2C_TOOLS=y
# BR2_PACKAGE_INPUT_EVENT_DAEMON is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_IRDA_UTILS is not set
# BR2_PACKAGE_KBD is not set
# BR2_PACKAGE_LCDPROC is not set
# BR2_PACKAGE_LINUX_FIRMWARE is not set
BR2_PACKAGE_LM_SENSORS=y
#
# lm-sensors tools
#
BR2_PACKAGE_LM_SENSORS_SENSORS=y
BR2_PACKAGE_LM_SENSORS_FANCONTROL=y
# BR2_PACKAGE_LM_SENSORS_ISADUMP is not set
# BR2_PACKAGE_LM_SENSORS_ISASET is not set
BR2_PACKAGE_LM_SENSORS_PWMCONFIG=y
BR2_PACKAGE_LM_SENSORS_SENSORS_DETECT=y
# BR2_PACKAGE_LSHW is not set
# BR2_PACKAGE_LSUIO is not set
# BR2_PACKAGE_LVM2 is not set
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MINICOM is not set
# BR2_PACKAGE_NANOCOM is not set
# BR2_PACKAGE_OFONO is not set
# BR2_PACKAGE_OPEN2300 is not set
# BR2_PACKAGE_OPENOCD is not set
# BR2_PACKAGE_PARTED is not set
# BR2_PACKAGE_PCIUTILS is not set
# BR2_PACKAGE_PICOCOM is not set
# BR2_PACKAGE_RNG_TOOLS is not set
# BR2_PACKAGE_SANE_BACKENDS is not set
# BR2_PACKAGE_SDPARM is not set
BR2_PACKAGE_SETSERIAL=y
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SREDIRD is not set
# BR2_PACKAGE_STATSERIAL is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_TI_UTILS is not set
# BR2_PACKAGE_UBOOT_TOOLS is not set
#
# udev requires /dev mgmnt set to udev under System configuration
#
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USB_MODESWITCH_DATA is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
#
# Interpreter languages and scripting
#
# BR2_PACKAGE_ERLANG is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_LUAJIT is not set
# BR2_PACKAGE_PERL is not set
# BR2_PACKAGE_PHP is not set
BR2_PACKAGE_PYTHON=y
# BR2_PACKAGE_PYTHON_PY_ONLY is not set
# BR2_PACKAGE_PYTHON_PYC_ONLY is not set
BR2_PACKAGE_PYTHON_PY_PYC=y
#
# core python modules
#
#
# The following modules are unusual or require extra libraries
#
# BR2_PACKAGE_PYTHON_BZIP2 is not set
# BR2_PACKAGE_PYTHON_BSDDB is not set
# BR2_PACKAGE_PYTHON_CODECSCJK is not set
# BR2_PACKAGE_PYTHON_CURSES is not set
# BR2_PACKAGE_PYTHON_PYEXPAT is not set
# BR2_PACKAGE_PYTHON_READLINE is not set
# BR2_PACKAGE_PYTHON_SSL is not set
BR2_PACKAGE_PYTHON_UNICODEDATA=y
# BR2_PACKAGE_PYTHON_SQLITE is not set
# BR2_PACKAGE_PYTHON_ZLIB is not set
# BR2_PACKAGE_PYTHON3 is not set
#
# external python modules
#
# BR2_PACKAGE_PYTHON_DPKT is not set
# BR2_PACKAGE_PYTHON_ID3 is not set
# BR2_PACKAGE_PYTHON_MAD is not set
# BR2_PACKAGE_PYTHON_MELD3 is not set
# BR2_PACKAGE_PYTHON_NETIFACES is not set
# BR2_PACKAGE_PYTHON_NFC is not set
# BR2_PACKAGE_PYTHON_PROTOBUF is not set
# BR2_PACKAGE_PYTHON_PYGAME is not set
# BR2_PACKAGE_PYTHON_SERIAL is not set
# BR2_PACKAGE_PYTHON_SETUPTOOLS is not set
# BR2_PACKAGE_RUBY is not set
# BR2_PACKAGE_TCL is not set
#
# Libraries
#
#
# Audio/Sound
#
# BR2_PACKAGE_ALSA_LIB is not set
# BR2_PACKAGE_AUDIOFILE is not set
# BR2_PACKAGE_LIBAO is not set
# BR2_PACKAGE_LIBCDAUDIO is not set
# BR2_PACKAGE_LIBCUE is not set
# BR2_PACKAGE_LIBCUEFILE is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBLO is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBREPLAYGAIN is not set
# BR2_PACKAGE_LIBSAMPLERATE is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_OPUS is not set
# BR2_PACKAGE_PORTAUDIO is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_TAGLIB is not set
# BR2_PACKAGE_TREMOR is not set
#
# Compression and decompression
#
# BR2_PACKAGE_LIBARCHIVE is not set
# BR2_PACKAGE_LZO is not set
BR2_PACKAGE_ZLIB=y
#
# Crypto
#
# BR2_PACKAGE_BEECRYPT is not set
BR2_PACKAGE_GNUTLS=y
BR2_PACKAGE_LIBGCRYPT=y
BR2_PACKAGE_LIBGPG_ERROR=y
BR2_PACKAGE_LIBNSS=y
# BR2_PACKAGE_OCF_LINUX is not set
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENSSL_OCF is not set
# BR2_PACKAGE_POLARSSL is not set
#
# Database
#
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_GDBM is not set
# BR2_PACKAGE_MYSQL_CLIENT is not set
#
# sqlcipher conflicts with sqlite
#
BR2_PACKAGE_SQLITE=y
# BR2_PACKAGE_SQLITE_READLINE is not set
# BR2_PACKAGE_SQLITE_STAT3 is not set
# BR2_PACKAGE_SQLITE_ENABLE_FTS3 is not set
# BR2_PACKAGE_SQLITE_ENABLE_UNLOCK_NOTIFY is not set
# BR2_PACKAGE_SQLITE_SECURE_DELETE is not set
#
# Filesystem
#
# BR2_PACKAGE_GAMIN is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBFUSE is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBSYSFS is not set
#
# Graphics
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_IMLIB2 is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBDMTX is not set
# BR2_PACKAGE_LIBEXIF is not set
# BR2_PACKAGE_LIBGEOTIFF is not set
# BR2_PACKAGE_GDK_PIXBUF is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBRAW is not set
# BR2_PACKAGE_LIBSVGTINY is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_OPENCV is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_TIFF is not set
#
# webkit requires C++, WCHAR in toolchain and libgtk2
#
# BR2_PACKAGE_ZXING is not set
#
# Hardware handling
#
# BR2_PACKAGE_CCID is not set
# BR2_PACKAGE_LCDAPI is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_TSLIB is not set
# BR2_PACKAGE_LIBFREEFARE is not set
# BR2_PACKAGE_LIBFTDI is not set
# BR2_PACKAGE_LIBHID is not set
# BR2_PACKAGE_LIBIQRF is not set
# BR2_PACKAGE_LIBNFC is not set
# BR2_PACKAGE_LIBNFC_LLCP is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LIBV4L is not set
# BR2_PACKAGE_MTDEV is not set
# BR2_PACKAGE_PCSC_LITE is not set
#
# Javascript
#
# BR2_PACKAGE_EXPLORERCANVAS is not set
# BR2_PACKAGE_FLOT is not set
# BR2_PACKAGE_JQUERY is not set
# BR2_PACKAGE_JQUERY_SPARKLINE is not set
# BR2_PACKAGE_JQUERY_VALIDATION is not set
# BR2_PACKAGE_JSMIN is not set
#
# Multimedia
#
# BR2_PACKAGE_LIBDVDREAD is not set
# BR2_PACKAGE_LIBDVDNAV is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPEG2 is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBPLAYER is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIVE555 is not set
# BR2_PACKAGE_MEDIASTREAMER is not set
#
# Networking
#
# BR2_PACKAGE_GLIB_NETWORKING is not set
# BR2_PACKAGE_LIBCGI is not set
# BR2_PACKAGE_LIBCGICC is not set
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBESMTP is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBFCGI is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBOAUTH is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_LIBMNL is not set
# BR2_PACKAGE_LIBMODBUS is not set
# BR2_PACKAGE_LIBMBUS is not set
# BR2_PACKAGE_LIBNETFILTER_ACCT is not set
# BR2_PACKAGE_LIBNETFILTER_CONNTRACK is not set
# BR2_PACKAGE_LIBNETFILTER_CTHELPER is not set
# BR2_PACKAGE_LIBNETFILTER_CTTIMEOUT is not set
# BR2_PACKAGE_LIBNETFILTER_LOG is not set
# BR2_PACKAGE_LIBNFNETLINK is not set
# BR2_PACKAGE_LIBNL is not set
#
# liboping requires a toolchain with IPv6 support enabled
#
# BR2_PACKAGE_LIBPCAP is not set
# BR2_PACKAGE_LIBOSIP2 is not set
# BR2_PACKAGE_LIBRSYNC is not set
# BR2_PACKAGE_LIBSOUP is not set
# BR2_PACKAGE_LIBTIRPC is not set
# BR2_PACKAGE_LIBTORRENT is not set
# BR2_PACKAGE_LIBUPNP is not set
# BR2_PACKAGE_LIBVNCSERVER is not set
# BR2_PACKAGE_ORTP is not set
# BR2_PACKAGE_ZEROMQ is not set
#
# Other
#
# BR2_PACKAGE_APR is not set
# BR2_PACKAGE_APR_UTIL is not set
# BR2_PACKAGE_FFTW is not set
# BR2_PACKAGE_LIBARGTABLE2 is not set
# BR2_PACKAGE_ARGP_STANDALONE is not set
# BR2_PACKAGE_BOOST is not set
# BR2_PACKAGE_LIBATOMIC_OPS is not set
# BR2_PACKAGE_LIBCAP is not set
# BR2_PACKAGE_LIBCAP_NG is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBEV is not set
BR2_PACKAGE_LIBFFI=y
# BR2_PACKAGE_GSL is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_LIBICAL is not set
BR2_PACKAGE_LIBNSPR=y
# BR2_PACKAGE_LIBSIGC is not set
# BR2_PACKAGE_LIBTPL is not set
# BR2_PACKAGE_LIBURCU is not set
#
# linux-pam requires a toolchain with WCHAR and locale support
#
# BR2_PACKAGE_LTTNG_LIBUST is not set
# BR2_PACKAGE_MTDEV2TUIO is not set
# BR2_PACKAGE_ORC is not set
# BR2_PACKAGE_POCO is not set
# BR2_PACKAGE_PROTOBUF is not set
# BR2_PACKAGE_SCHIFRA is not set
# BR2_PACKAGE_LIBLOG4C_LOCALTIME is not set
#
# Text and terminal handling
#
# BR2_PACKAGE_ENCHANT is not set
# BR2_PACKAGE_ICU is not set
# BR2_PACKAGE_LIBICONV is not set
BR2_PACKAGE_NCURSES=y
BR2_PACKAGE_NCURSES_TARGET_PANEL=y
BR2_PACKAGE_NCURSES_TARGET_FORM=y
BR2_PACKAGE_NCURSES_TARGET_MENU=y
# BR2_PACKAGE_NEWT is not set
BR2_PACKAGE_PCRE=y
# BR2_PACKAGE_POPT is not set
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_SLANG is not set
#
# JSON/XML
#
# BR2_PACKAGE_CJSON is not set
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_JSON_C is not set
# BR2_PACKAGE_LIBROXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set
# BR2_PACKAGE_LIBYAML is not set
# BR2_PACKAGE_MXML is not set
# BR2_PACKAGE_XERCES is not set
# BR2_PACKAGE_YAJL is not set
#
# Miscellaneous
#
# BR2_PACKAGE_COLLECTD is not set
# BR2_PACKAGE_EMPTY is not set
# BR2_PACKAGE_GOOGLEFONTDIRECTORY is not set
# BR2_PACKAGE_MOBILE_BROADBAND_PROVIDER_INFO is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_SOUND_THEME_BOREALIS is not set
# BR2_PACKAGE_SOUND_THEME_FREEDESKTOP is not set
#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_ARPTABLES is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set
# BR2_PACKAGE_BLUEZ_UTILS is not set
# BR2_PACKAGE_BOA is not set
#
# bmon requires a toolchain with IPv6 support
#
# BR2_PACKAGE_BRIDGE_UTILS is not set
# BR2_PACKAGE_CAN_UTILS is not set
#
# connman needs a toolchain with IPv6, WCHAR, thread and resolver support
#
# BR2_PACKAGE_CTORRENT is not set
#
# conntrack-tools requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_DNSMASQ is not set
BR2_PACKAGE_DROPBEAR=y
# BR2_PACKAGE_DROPBEAR_DISABLE_REVERSEDNS is not set
BR2_PACKAGE_DROPBEAR_SMALL=y
# BR2_PACKAGE_DROPBEAR_WTMP is not set
# BR2_PACKAGE_DROPBEAR_LASTLOG is not set
#
# ebtables requires a toolchain with IPv6 support
#
BR2_PACKAGE_ETHTOOL=y
# BR2_PACKAGE_HEIRLOOM_MAILX is not set
# BR2_PACKAGE_HIAWATHA is not set
# BR2_PACKAGE_HOSTAPD is not set
# BR2_PACKAGE_INADYN is not set
BR2_PACKAGE_IPERF=y
# BR2_PACKAGE_IPROUTE2 is not set
# BR2_PACKAGE_IPSEC_TOOLS is not set
# BR2_PACKAGE_IPSET is not set
# BR2_PACKAGE_IPTABLES is not set
# BR2_PACKAGE_IW is not set
# BR2_PACKAGE_KISMET is not set
# BR2_PACKAGE_LIGHTTPD is not set
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LINPHONE is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MACCHANGER is not set
BR2_PACKAGE_MII_DIAG=y
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MSMTP is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set
# BR2_PACKAGE_NCFTP is not set
#
# ndisc6 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_NETATALK is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set
#
# NetworkManager requires a toolchain with IPV6, LARGEFILE, WCHAR and
thread support
#
# BR2_PACKAGE_NFACCT is not set
# BR2_PACKAGE_NOIP is not set
# BR2_PACKAGE_NGIRCD is not set
# BR2_PACKAGE_NGREP is not set
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_NUTTCP is not set
#
# olsr requires a toolchain with IPv6 support
#
# BR2_PACKAGE_OPENNTPD is not set
BR2_PACKAGE_OPENSSH=y
# BR2_PACKAGE_OPENSWAN is not set
# BR2_PACKAGE_OPENVPN is not set
#
# portmap requires a toolchain with RPC support
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
#
# radvd requires a toolchain with IPV6 support
#
# BR2_PACKAGE_RPCBIND is not set
# BR2_PACKAGE_RSH_REDONE is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_RTORRENT is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SCONESERVER is not set
# BR2_PACKAGE_SER2NET is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SOCKETCAND is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
#
# Squid requires a toolchain with C++ and IPv6 support enabled
#
# BR2_PACKAGE_STUNNEL is not set
# BR2_PACKAGE_TCPDUMP is not set
# BR2_PACKAGE_TCPREPLAY is not set
# BR2_PACKAGE_THTTPD is not set
# BR2_PACKAGE_TINYHTTPD is not set
# BR2_PACKAGE_TN5250 is not set
#
# Transmission requires a toolchain with IPv6 support
#
# BR2_PACKAGE_UDPCAST is not set
#
# ulogd requires a toolchain with IPV6 and LARGEFILE support
#
# BR2_PACKAGE_USHARE is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set
# BR2_PACKAGE_XINETD is not set
# BR2_PACKAGE_XL2TP is not set
#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_OPKG is not set
#
# Real-Time
#
# BR2_PACKAGE_XENOMAI is not set
#
# Shell and utilities
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_DIALOG is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GNUPG is not set
# BR2_PACKAGE_INOTIFY_TOOLS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set
# BR2_PACKAGE_LOGROTATE is not set
# BR2_PACKAGE_LOGSURFER is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SUDO is not set
# BR2_PACKAGE_XMLSTARLET is not set
#
# System tools
#
# BR2_PACKAGE_ACL is not set
# BR2_PACKAGE_ATTR is not set
# BR2_PACKAGE_BWM_NG is not set
# BR2_PACKAGE_CPULOAD is not set
# BR2_PACKAGE_HTOP is not set
# BR2_PACKAGE_KMOD is not set
# BR2_PACKAGE_MONIT is not set
# BR2_PACKAGE_QUOTA is not set
# BR2_PACKAGE_SUPERVISOR is not set
#
# systemd not available (depends on /dev management with udev and ipv6
support, and thread support in toolchain)
#
BR2_PACKAGE_UTIL_LINUX=y
# BR2_PACKAGE_UTIL_LINUX_MOUNT is not set
BR2_PACKAGE_UTIL_LINUX_FSCK=y
# BR2_PACKAGE_UTIL_LINUX_LIBMOUNT is not set
BR2_PACKAGE_UTIL_LINUX_LIBUUID=y
# BR2_PACKAGE_UTIL_LINUX_UUIDD is not set
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
# BR2_PACKAGE_UTIL_LINUX_AGETTY is not set
# BR2_PACKAGE_UTIL_LINUX_CRAMFS is not set
# BR2_PACKAGE_UTIL_LINUX_SWITCH_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_PIVOT_ROOT is not set
# BR2_PACKAGE_UTIL_LINUX_FALLOCATE is not set
# BR2_PACKAGE_UTIL_LINUX_UNSHARE is not set
# BR2_PACKAGE_UTIL_LINUX_RENAME is not set
# BR2_PACKAGE_UTIL_LINUX_SCHEDUTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WALL is not set
# BR2_PACKAGE_UTIL_LINUX_PARTX is not set
# BR2_PACKAGE_UTIL_LINUX_ARCH is not set
# BR2_PACKAGE_UTIL_LINUX_INIT is not set
BR2_PACKAGE_UTIL_LINUX_KILL=y
# BR2_PACKAGE_UTIL_LINUX_LAST is not set
# BR2_PACKAGE_UTIL_LINUX_MESG is not set
# BR2_PACKAGE_UTIL_LINUX_RAW is not set
# BR2_PACKAGE_UTIL_LINUX_RESET is not set
# BR2_PACKAGE_UTIL_LINUX_LOGIN_UTILS is not set
# BR2_PACKAGE_UTIL_LINUX_WRITE is not set
#
# Text editors and viewers
#
# BR2_PACKAGE_ED is not set
BR2_PACKAGE_NANO=y
BR2_PACKAGE_NANO_TINY=y
# BR2_PACKAGE_UEMACS is not set
#
# Host utilities
#
# BR2_PACKAGE_HOST_DFU_UTIL is not set
# BR2_PACKAGE_HOST_LPC3250LOADER is not set
# BR2_PACKAGE_HOST_OPENOCD is not set
# BR2_PACKAGE_HOST_SAM_BA is not set
# BR2_PACKAGE_HOST_UBOOT_TOOLS is not set
#
# Filesystem images
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
# BR2_TARGET_ROOTFS_EXT2 is not set
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_UBIFS is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
# BR2_TARGET_ROOTFS_TAR is not set
BR2_TARGET_ROOTFS_CPIO=y
# BR2_TARGET_ROOTFS_CPIO_NONE is not set
BR2_TARGET_ROOTFS_CPIO_GZIP=y
# BR2_TARGET_ROOTFS_CPIO_BZIP2 is not set
# BR2_TARGET_ROOTFS_CPIO_LZMA is not set
#
# initramfs requires a Linux kernel to be built
#
# BR2_TARGET_ROOTFS_ROMFS is not set
#
# Bootloaders
#
# BR2_TARGET_BAREBOX is not set
# BR2_TARGET_UBOOT is not set
#
# Kernel
#
# BR2_LINUX_KERNEL is not set
BR2_LEGACY_CHECK_2012_11=y
# BR2_PACKAGE_GETTEXT_STATIC is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_INPUT_TOOLS_EVTEST is not set
--
*******************************************************
Jan-Hendrik Schunke
Entwickler / Developer
SHF Communication Technologies AG
Wilhelm-v.-Siemens-Str. 23 D; 12277 Berlin, Germany
E-Mail: schunke at shf.de
Phone: +49-(0)30- 77 20 51-0 direct: -45
Fax: +49-(0)30- 75 31 07 8
Web: www.shf.de
*******************************************************
Sitz der Gesellschaft/Registered Office: Berlin;
Registergericht/Register Court: AG Berlin-Charlottenburg HRB 72633;
Vorstand/Executive Board: Dr. Frank Hieronymi, Dr. Lars Klapproth;
Aufsichtsratsvorsitzender/Chairman of the Supervisory Board: Dr. Walter
L. Rust.
Diese E-Mail enth?lt vertrauliche und/oder rechtlich gesch?tzte
Informationen und ist ausschlie?lich f?r den bezeichneten Adressaten
oder dessen Vertreter bestimmt. Wenn Sie nicht der richtige Adressat
sind oder diese E-Mail irrt?mlich erhalten haben, informieren Sie bitte
sofort den Absender und vernichten Sie diese Mail. Jede Form der
Kenntnisnahme, Ver?ffentlichung, Vervielf?ltigung oder Weitergabe durch
andere Empf?nger ist unzul?ssig.
This e-mail may contain confidential and/or privileged information and
is intended solely for the addressee or a representative there of. If
you are not the intended recipient (or have received this e-mail in
error) please notify the sender immediately and destroy this e-mail.
Access to, publishing and copying of the information by a third party is
unauthorised.
^ permalink raw reply
* [Buildroot] Support of iMX6 hardware ?
From: Thierry Bultel @ 2012-12-06 9:14 UTC (permalink / raw)
To: buildroot
Hi,
I have 2 questions around the Buildroot support for iMX6 from Freescale,
especially around graphics.
1) Is there current work on that for a coming release ?
I have noticed that openbricks seem to already have integrated the
imx6-lib and xdriver-xf86-video-imx
2) I have trying to get both of them integrated in buildroot
The imx6-lib, which will be a 'generic-package', needs includes of the
target kernel; these includes are not in the sysroot.
What is the most appropriate way to proceed ? The underlying Makefile
has got a "INCLUDE" var to be set, shall I point it to my linux-custom
build directory ? That does not seem very good.
Thanks
Thierry
^ permalink raw reply
* [Buildroot] [v2] luajit: complete replacement for lua
From: Francois Perrad @ 2012-12-06 8:44 UTC (permalink / raw)
To: buildroot
the mutual exclusion is done by a choice
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
see initial discussion, http://article.gmane.org/gmane.comp.lib.uclibc.buildroot/43499
---
Makefile | 6 ++++++
package/Config.in | 1 -
package/copas/copas.mk | 2 +-
package/coxpcall/coxpcall.mk | 1 -
package/lua-msgpack-native/lua-msgpack-native.mk | 2 +-
package/lua/Config.in | 25 ++++++++++++++++++++++
package/luacjson/luacjson.mk | 2 +-
package/luaexpat/luaexpat.mk | 2 +-
package/luafilesystem/luafilesystem.mk | 2 +-
package/luajit/Config.in | 12 -----------
package/luajit/luajit-05-install-like-lua.patch | 17 +++++++++++++++
package/luasocket/luasocket.mk | 2 +-
package/rings/rings.mk | 2 +-
package/xavante/xavante.mk | 2 +-
14 files changed, 56 insertions(+), 22 deletions(-)
delete mode 100644 package/luajit/Config.in
create mode 100644 package/luajit/luajit-05-install-like-lua.patch
diff --git a/Makefile b/Makefile
index 4b09437..b5215e0 100644
--- a/Makefile
+++ b/Makefile
@@ -282,6 +282,12 @@ HOSTCC := $(CCACHE) $(HOSTCC)
HOSTCXX := $(CCACHE) $(HOSTCXX)
endif
+ifeq ($(BR2_PACKAGE_LUA),y)
+ LUA_INTERPRETER = lua
+else ifeq ($(BR2_PACKAGE_LUAJIT),y)
+ LUA_INTERPRETER = luajit
+endif
+
#############################################################
#
# You should probably leave this stuff alone unless you know
diff --git a/package/Config.in b/package/Config.in
index 74e439e..e6e294e 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -271,7 +271,6 @@ source "package/erlang/Config.in"
source "package/haserl/Config.in"
source "package/jamvm/Config.in"
source "package/lua/Config.in"
-source "package/luajit/Config.in"
if BR2_PACKAGE_LUA || BR2_PACKAGE_LUAJIT
menu "LUA libraries/modules"
source "package/cgilua/Config.in"
diff --git a/package/copas/copas.mk b/package/copas/copas.mk
index c84a6cc..a258927 100644
--- a/package/copas/copas.mk
+++ b/package/copas/copas.mk
@@ -6,7 +6,7 @@
COPAS_VERSION = 1.1.6
COPAS_SITE = http://github.com/downloads/keplerproject/copas
-COPAS_DEPENDENCIES = lua coxpcall luasocket
+COPAS_DEPENDENCIES = coxpcall luasocket
COPAS_LICENSE = MIT
define COPAS_INSTALL_TARGET_CMDS
diff --git a/package/coxpcall/coxpcall.mk b/package/coxpcall/coxpcall.mk
index e7fb76d..329d6fd 100644
--- a/package/coxpcall/coxpcall.mk
+++ b/package/coxpcall/coxpcall.mk
@@ -6,7 +6,6 @@
COXPCALL_VERSION = 1.13.0
COXPCALL_SITE = http://luaforge.net/frs/download.php/3406
-COXPCALL_DEPENDENCIES = lua
COXPCALL_LICENSE = MIT
define COXPCALL_INSTALL_TARGET_CMDS
diff --git a/package/lua-msgpack-native/lua-msgpack-native.mk b/package/lua-msgpack-native/lua-msgpack-native.mk
index 97ce83c..5387f53 100644
--- a/package/lua-msgpack-native/lua-msgpack-native.mk
+++ b/package/lua-msgpack-native/lua-msgpack-native.mk
@@ -5,7 +5,7 @@
#############################################################
LUA_MSGPACK_NATIVE_VERSION = g41cce91
LUA_MSGPACK_NATIVE_SITE = http://github.com/kengonakajima/lua-msgpack-native/tarball/master
-LUA_MSGPACK_NATIVE_DEPENDENCIES = lua
+LUA_MSGPACK_NATIVE_DEPENDENCIES = $(LUA_INTERPRETER)
LUA_MSGPACK_NATIVE_LICENSE = Apache-2.0
LUA_MSGPACK_NATIVE_LICENSE_FILES = LICENSE.txt
diff --git a/package/lua/Config.in b/package/lua/Config.in
index 4166730..d698a25 100644
--- a/package/lua/Config.in
+++ b/package/lua/Config.in
@@ -1,3 +1,13 @@
+
+choice
+ prompt "Lua Interpreter"
+ default BR2_PACKAGE_LUA_NONE
+
+config BR2_PACKAGE_LUA_NONE
+ bool "none"
+ help
+ None.
+
config BR2_PACKAGE_LUA
bool "lua"
help
@@ -5,6 +15,21 @@ config BR2_PACKAGE_LUA
http://www.lua.org/
+config BR2_PACKAGE_LUAJIT
+ bool "luajit"
+ # Luajit is only available for some target architectures, and
+ # has some complexity wrt 32/64. See luajit.mk for details.
+ depends on BR2_i386 || (BR2_x86_64 && BR2_HOSTARCH='x86_64') || BR2_powerpc || BR2_arm || BR2_armeb
+ help
+ LuaJIT implements the full set of language features defined
+ by Lua 5.1. The virtual machine (VM) is API- and
+ ABI-compatible to the standard Lua interpreter and can be
+ deployed as a drop-in replacement.
+
+ http://luajit.org/
+
+endchoice
+
if BR2_PACKAGE_LUA
choice
diff --git a/package/luacjson/luacjson.mk b/package/luacjson/luacjson.mk
index 1f79d5d..de79e9f 100644
--- a/package/luacjson/luacjson.mk
+++ b/package/luacjson/luacjson.mk
@@ -6,7 +6,7 @@
LUACJSON_VERSION = 2.1.0
LUACJSON_SOURCE = lua-cjson-$(LUACJSON_VERSION).tar.gz
LUACJSON_SITE = http://www.kyne.com.au/~mark/software/download
-LUACJSON_DEPENDENCIES = lua
+LUACJSON_DEPENDENCIES = $(LUA_INTERPRETER)
LUACJSON_LICENSE = MIT
LUACJSON_LICENSE_FILES = LICENSE
diff --git a/package/luaexpat/luaexpat.mk b/package/luaexpat/luaexpat.mk
index 2d4c517..435eb8e 100644
--- a/package/luaexpat/luaexpat.mk
+++ b/package/luaexpat/luaexpat.mk
@@ -6,7 +6,7 @@
LUAEXPAT_VERSION = 1.2.0
LUAEXPAT_SITE = http://matthewwild.co.uk/projects/luaexpat
-LUAEXPAT_DEPENDENCIES = lua expat
+LUAEXPAT_DEPENDENCIES = $(LUA_INTERPRETER) expat
LUAEXPAT_LICENSE = MIT
diff --git a/package/luafilesystem/luafilesystem.mk b/package/luafilesystem/luafilesystem.mk
index 8553212..5e964af 100644
--- a/package/luafilesystem/luafilesystem.mk
+++ b/package/luafilesystem/luafilesystem.mk
@@ -6,7 +6,7 @@
LUAFILESYSTEM_VERSION = 1.5.0
LUAFILESYSTEM_SITE = http://github.com/downloads/keplerproject/luafilesystem
-LUAFILESYSTEM_DEPENDENCIES = lua
+LUAFILESYSTEM_DEPENDENCIES = $(LUA_INTERPRETER)
LUAFILESYSTEM_LICENSE = MIT
ifeq ($(BR2_LARGEFILE),y)
diff --git a/package/luajit/Config.in b/package/luajit/Config.in
deleted file mode 100644
index 23b2650..0000000
--- a/package/luajit/Config.in
+++ /dev/null
@@ -1,12 +0,0 @@
-config BR2_PACKAGE_LUAJIT
- bool "luajit"
- # Luajit is only available for some target architectures, and
- # has some complexity wrt 32/64. See luajit.mk for details.
- depends on BR2_i386 || (BR2_x86_64 && BR2_HOSTARCH='x86_64') || BR2_powerpc || BR2_arm || BR2_armeb
- help
- LuaJIT implements the full set of language features defined
- by Lua 5.1. The virtual machine (VM) is API- and
- ABI-compatible to the standard Lua interpreter and can be
- deployed as a drop-in replacement.
-
- http://luajit.org/
diff --git a/package/luajit/luajit-05-install-like-lua.patch b/package/luajit/luajit-05-install-like-lua.patch
new file mode 100644
index 0000000..8b91805
--- /dev/null
+++ b/package/luajit/luajit-05-install-like-lua.patch
@@ -0,0 +1,17 @@
+Install includes in /usr/include
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/Makefile
+===================================================================
+--- a/Makefile
++++ b/Makefile
+@@ -33,7 +33,7 @@
+ INSTALL_BIN= $(DPREFIX)/bin
+ INSTALL_LIB= $(DPREFIX)/lib
+ INSTALL_SHARE= $(DPREFIX)/share
+-INSTALL_INC= $(DPREFIX)/include/luajit-$(MAJVER).$(MINVER)
++INSTALL_INC= $(DPREFIX)/include
+
+ INSTALL_JITLIB= $(INSTALL_SHARE)/luajit-$(VERSION)/jit
+ INSTALL_LMOD= $(INSTALL_SHARE)/lua/$(ABIVER)
diff --git a/package/luasocket/luasocket.mk b/package/luasocket/luasocket.mk
index 45fb9a3..3126ea3 100644
--- a/package/luasocket/luasocket.mk
+++ b/package/luasocket/luasocket.mk
@@ -6,7 +6,7 @@
LUASOCKET_VERSION = 2.0.2
LUASOCKET_SITE = http://luaforge.net/frs/download.php/2664
-LUASOCKET_DEPENDENCIES = lua
+LUASOCKET_DEPENDENCIES = $(LUA_INTERPRETER)
LUASOCKET_LICENSE = MIT
LUASOCKET_LICENSE_FILES = LICENSE
diff --git a/package/rings/rings.mk b/package/rings/rings.mk
index e2a2bd7..791cf5e 100644
--- a/package/rings/rings.mk
+++ b/package/rings/rings.mk
@@ -6,7 +6,7 @@
RINGS_VERSION = 1.2.3
RINGS_SITE = http://github.com/downloads/keplerproject/rings
-RINGS_DEPENDENCIES = lua
+RINGS_DEPENDENCIES = $(LUA_INTERPRETER)
RINGS_LICENSE = MIT
define RINGS_BUILD_CMDS
diff --git a/package/xavante/xavante.mk b/package/xavante/xavante.mk
index 0c1c6f1..7f49f4d 100644
--- a/package/xavante/xavante.mk
+++ b/package/xavante/xavante.mk
@@ -6,7 +6,7 @@
XAVANTE_VERSION = 2.2.1
XAVANTE_SITE = http://github.com/downloads/keplerproject/xavante
-XAVANTE_DEPENDENCIES = cgilua copas coxpcall lua luafilesystem luasocket wsapi
+XAVANTE_DEPENDENCIES = cgilua copas coxpcall luafilesystem luasocket wsapi
XAVANTE_LICENSE = MIT
define XAVANTE_INSTALL_TARGET_CMDS
--
1.7.9.5
^ permalink raw reply related
* [Buildroot] [autobuild.buildroot.net] Build results for 2012-12-05
From: Thomas Petazzoni @ 2012-12-06 7:35 UTC (permalink / raw)
To: buildroot
Hello,
On 2012-12-05, 166 random build tests have been done and
submitted on autobuild.buildroot.net.
99 builds have been successful
67 builds have failed
Below the results of the failed builds. Successful builds are omitted.
Build 8c8bd7e282b504b8e44a47cc008e5c26e4f82668
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 00:01:01
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=29d4d2c6c484b768d7eb36b03f22cb60ac9c285a
End of log : http://autobuild.buildroot.net/results/8c8bd7e282b504b8e44a47cc008e5c26e4f82668/build-end.log
Complete log : http://autobuild.buildroot.net/results/8c8bd7e282b504b8e44a47cc008e5c26e4f82668/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8c8bd7e282b504b8e44a47cc008e5c26e4f82668/config
Defconfig : http://autobuild.buildroot.net/results/8c8bd7e282b504b8e44a47cc008e5c26e4f82668/defconfig
Build b2c8223a5eca782903e6c8c16a70fdf1cf9826b1
==============================================
Status : NOK
Failure reason : libroxml-2.2.1
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 00:10:43
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=d97187f8c813bf030b76ee9cf6d43d407d8e2966
End of log : http://autobuild.buildroot.net/results/b2c8223a5eca782903e6c8c16a70fdf1cf9826b1/build-end.log
Complete log : http://autobuild.buildroot.net/results/b2c8223a5eca782903e6c8c16a70fdf1cf9826b1/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/b2c8223a5eca782903e6c8c16a70fdf1cf9826b1/config
Defconfig : http://autobuild.buildroot.net/results/b2c8223a5eca782903e6c8c16a70fdf1cf9826b1/defconfig
Build f2b22d62f14d7b24333ed4fcddc930baa2c0a5e8
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 00:30:05
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=29d4d2c6c484b768d7eb36b03f22cb60ac9c285a
End of log : http://autobuild.buildroot.net/results/f2b22d62f14d7b24333ed4fcddc930baa2c0a5e8/build-end.log
Complete log : http://autobuild.buildroot.net/results/f2b22d62f14d7b24333ed4fcddc930baa2c0a5e8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f2b22d62f14d7b24333ed4fcddc930baa2c0a5e8/config
Defconfig : http://autobuild.buildroot.net/results/f2b22d62f14d7b24333ed4fcddc930baa2c0a5e8/defconfig
Build 90afab39470484b857738730fd63efa1ebe3203e
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 00:42:21
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=29d4d2c6c484b768d7eb36b03f22cb60ac9c285a
End of log : http://autobuild.buildroot.net/results/90afab39470484b857738730fd63efa1ebe3203e/build-end.log
Complete log : http://autobuild.buildroot.net/results/90afab39470484b857738730fd63efa1ebe3203e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/90afab39470484b857738730fd63efa1ebe3203e/config
Defconfig : http://autobuild.buildroot.net/results/90afab39470484b857738730fd63efa1ebe3203e/defconfig
Build 37d9c4c53592da0c3fe3f902fc62e36bbb7ce7ea
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 00:50:51
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=29d4d2c6c484b768d7eb36b03f22cb60ac9c285a
End of log : http://autobuild.buildroot.net/results/37d9c4c53592da0c3fe3f902fc62e36bbb7ce7ea/build-end.log
Complete log : http://autobuild.buildroot.net/results/37d9c4c53592da0c3fe3f902fc62e36bbb7ce7ea/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/37d9c4c53592da0c3fe3f902fc62e36bbb7ce7ea/config
Defconfig : http://autobuild.buildroot.net/results/37d9c4c53592da0c3fe3f902fc62e36bbb7ce7ea/defconfig
Build 83c1143457229bc71d48fb59513eeab2b7103deb
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 01:05:58
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=29d4d2c6c484b768d7eb36b03f22cb60ac9c285a
End of log : http://autobuild.buildroot.net/results/83c1143457229bc71d48fb59513eeab2b7103deb/build-end.log
Complete log : http://autobuild.buildroot.net/results/83c1143457229bc71d48fb59513eeab2b7103deb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/83c1143457229bc71d48fb59513eeab2b7103deb/config
Defconfig : http://autobuild.buildroot.net/results/83c1143457229bc71d48fb59513eeab2b7103deb/defconfig
Build f6c67aa32c95014eb546f81a1e2e97c071b89972
==============================================
Status : NOK
Failure reason : liboping-1.6.2
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 01:26:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/f6c67aa32c95014eb546f81a1e2e97c071b89972/build-end.log
Complete log : http://autobuild.buildroot.net/results/f6c67aa32c95014eb546f81a1e2e97c071b89972/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f6c67aa32c95014eb546f81a1e2e97c071b89972/config
Defconfig : http://autobuild.buildroot.net/results/f6c67aa32c95014eb546f81a1e2e97c071b89972/defconfig
Build ff71240c715b2945b4aa746aaaaedf49967ecb37
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 02:29:29
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/ff71240c715b2945b4aa746aaaaedf49967ecb37/build-end.log
Complete log : http://autobuild.buildroot.net/results/ff71240c715b2945b4aa746aaaaedf49967ecb37/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ff71240c715b2945b4aa746aaaaedf49967ecb37/config
Defconfig : http://autobuild.buildroot.net/results/ff71240c715b2945b4aa746aaaaedf49967ecb37/defconfig
Build e2174e80fdd13051a43ab56c16e662e52ca9c99b
==============================================
Status : NOK
Failure reason : libcap-2.22
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 02:41:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/e2174e80fdd13051a43ab56c16e662e52ca9c99b/build-end.log
Complete log : http://autobuild.buildroot.net/results/e2174e80fdd13051a43ab56c16e662e52ca9c99b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/e2174e80fdd13051a43ab56c16e662e52ca9c99b/config
Defconfig : http://autobuild.buildroot.net/results/e2174e80fdd13051a43ab56c16e662e52ca9c99b/defconfig
Build 92e0f09885223187fe95a6cca706862100fe2037
==============================================
Status : NOK
Failure reason : openssl-1.0.1c
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 03:01:59
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/92e0f09885223187fe95a6cca706862100fe2037/build-end.log
Complete log : http://autobuild.buildroot.net/results/92e0f09885223187fe95a6cca706862100fe2037/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/92e0f09885223187fe95a6cca706862100fe2037/config
Defconfig : http://autobuild.buildroot.net/results/92e0f09885223187fe95a6cca706862100fe2037/defconfig
Build a195766ce17bc126fcbca418f22740af38d2f565
==============================================
Status : NOK
Failure reason : gdb-7.4.1-target
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 03:03:35
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/a195766ce17bc126fcbca418f22740af38d2f565/build-end.log
Complete log : http://autobuild.buildroot.net/results/a195766ce17bc126fcbca418f22740af38d2f565/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a195766ce17bc126fcbca418f22740af38d2f565/config
Defconfig : http://autobuild.buildroot.net/results/a195766ce17bc126fcbca418f22740af38d2f565/defconfig
Build 1c4fe358e3f57ec514164a007ee7460b918e1863
==============================================
Status : NOK
Failure reason : dbus-1.4.24
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 03:43:07
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/1c4fe358e3f57ec514164a007ee7460b918e1863/build-end.log
Complete log : http://autobuild.buildroot.net/results/1c4fe358e3f57ec514164a007ee7460b918e1863/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1c4fe358e3f57ec514164a007ee7460b918e1863/config
Defconfig : http://autobuild.buildroot.net/results/1c4fe358e3f57ec514164a007ee7460b918e1863/defconfig
Build ff558277c54f6a85471adee5e25cbaa07ebb65e3
==============================================
Status : NOK
Failure reason : mplayer-1.1
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 03:47:49
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/ff558277c54f6a85471adee5e25cbaa07ebb65e3/build-end.log
Complete log : http://autobuild.buildroot.net/results/ff558277c54f6a85471adee5e25cbaa07ebb65e3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ff558277c54f6a85471adee5e25cbaa07ebb65e3/config
Defconfig : http://autobuild.buildroot.net/results/ff558277c54f6a85471adee5e25cbaa07ebb65e3/defconfig
Build de55bd08ba0599c40052d17f3aea9901db5af427
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 04:32:18
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/de55bd08ba0599c40052d17f3aea9901db5af427/build-end.log
Complete log : http://autobuild.buildroot.net/results/de55bd08ba0599c40052d17f3aea9901db5af427/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/de55bd08ba0599c40052d17f3aea9901db5af427/config
Defconfig : http://autobuild.buildroot.net/results/de55bd08ba0599c40052d17f3aea9901db5af427/defconfig
Build 2c142798807ac61c3ff8b42f07ae05edc464e0c4
==============================================
Status : NOK
Failure reason : mtd-1.5.0
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 04:45:05
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/2c142798807ac61c3ff8b42f07ae05edc464e0c4/build-end.log
Complete log : http://autobuild.buildroot.net/results/2c142798807ac61c3ff8b42f07ae05edc464e0c4/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2c142798807ac61c3ff8b42f07ae05edc464e0c4/config
Defconfig : http://autobuild.buildroot.net/results/2c142798807ac61c3ff8b42f07ae05edc464e0c4/defconfig
Build 1db734555b960a2360c637390e9f06f5122e2e14
==============================================
Status : NOK
Failure reason : host-python-2.7.3
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 04:53:32
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/1db734555b960a2360c637390e9f06f5122e2e14/build-end.log
Complete log : http://autobuild.buildroot.net/results/1db734555b960a2360c637390e9f06f5122e2e14/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1db734555b960a2360c637390e9f06f5122e2e14/config
Defconfig : http://autobuild.buildroot.net/results/1db734555b960a2360c637390e9f06f5122e2e14/defconfig
Build 7833edd60bbb2c291aea1efb5ccf407da7f4a51f
==============================================
Status : NOK
Failure reason : sconeserver-180
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 04:56:00
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/build-end.log
Complete log : http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/config
Defconfig : http://autobuild.buildroot.net/results/7833edd60bbb2c291aea1efb5ccf407da7f4a51f/defconfig
Build 264d7272112b52f4caf2d72beb306f3109894ad4
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 04:56:40
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/264d7272112b52f4caf2d72beb306f3109894ad4/build-end.log
Complete log : http://autobuild.buildroot.net/results/264d7272112b52f4caf2d72beb306f3109894ad4/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/264d7272112b52f4caf2d72beb306f3109894ad4/config
Defconfig : http://autobuild.buildroot.net/results/264d7272112b52f4caf2d72beb306f3109894ad4/defconfig
Build 01447f48a19d9af019e67f38f54301b73ba928ab
==============================================
Status : NOK
Failure reason : libcap-ng-0.6.6
Architecture : avr32
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 05:21:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/01447f48a19d9af019e67f38f54301b73ba928ab/build-end.log
Complete log : http://autobuild.buildroot.net/results/01447f48a19d9af019e67f38f54301b73ba928ab/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/01447f48a19d9af019e67f38f54301b73ba928ab/config
Defconfig : http://autobuild.buildroot.net/results/01447f48a19d9af019e67f38f54301b73ba928ab/defconfig
Build 258a15782a2e29f5d1ceaf83e4c645cccc5c515d
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 05:35:29
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/258a15782a2e29f5d1ceaf83e4c645cccc5c515d/build-end.log
Complete log : http://autobuild.buildroot.net/results/258a15782a2e29f5d1ceaf83e4c645cccc5c515d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/258a15782a2e29f5d1ceaf83e4c645cccc5c515d/config
Defconfig : http://autobuild.buildroot.net/results/258a15782a2e29f5d1ceaf83e4c645cccc5c515d/defconfig
Build c129ab9eabd22fb666158619ad0ce676127569d6
==============================================
Status : NOK
Failure reason : ffmpeg-0.8.12
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 06:08:49
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/c129ab9eabd22fb666158619ad0ce676127569d6/build-end.log
Complete log : http://autobuild.buildroot.net/results/c129ab9eabd22fb666158619ad0ce676127569d6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c129ab9eabd22fb666158619ad0ce676127569d6/config
Defconfig : http://autobuild.buildroot.net/results/c129ab9eabd22fb666158619ad0ce676127569d6/defconfig
Build a025a074f7a1ebe68bf1339790dbc5457bb4d6b5
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 06:22:01
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/a025a074f7a1ebe68bf1339790dbc5457bb4d6b5/build-end.log
Complete log : http://autobuild.buildroot.net/results/a025a074f7a1ebe68bf1339790dbc5457bb4d6b5/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a025a074f7a1ebe68bf1339790dbc5457bb4d6b5/config
Defconfig : http://autobuild.buildroot.net/results/a025a074f7a1ebe68bf1339790dbc5457bb4d6b5/defconfig
Build ceb7e52cf9ac3120ffd50922fb6ee396cd4681e3
==============================================
Status : NOK
Failure reason : host-python-2.7.3
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 07:11:00
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/ceb7e52cf9ac3120ffd50922fb6ee396cd4681e3/build-end.log
Complete log : http://autobuild.buildroot.net/results/ceb7e52cf9ac3120ffd50922fb6ee396cd4681e3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ceb7e52cf9ac3120ffd50922fb6ee396cd4681e3/config
Defconfig : http://autobuild.buildroot.net/results/ceb7e52cf9ac3120ffd50922fb6ee396cd4681e3/defconfig
Build 7de701d978b36797637a0fcebb80e9ab09705975
==============================================
Status : NOK
Failure reason : directfb-1.4.17
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 07:21:18
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/7de701d978b36797637a0fcebb80e9ab09705975/build-end.log
Complete log : http://autobuild.buildroot.net/results/7de701d978b36797637a0fcebb80e9ab09705975/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7de701d978b36797637a0fcebb80e9ab09705975/config
Defconfig : http://autobuild.buildroot.net/results/7de701d978b36797637a0fcebb80e9ab09705975/defconfig
Build ab49affd5bd5d3331b4b4fd91b442731f694c791
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 07:43:11
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/ab49affd5bd5d3331b4b4fd91b442731f694c791/build-end.log
Complete log : http://autobuild.buildroot.net/results/ab49affd5bd5d3331b4b4fd91b442731f694c791/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ab49affd5bd5d3331b4b4fd91b442731f694c791/config
Defconfig : http://autobuild.buildroot.net/results/ab49affd5bd5d3331b4b4fd91b442731f694c791/defconfig
Build 19b2f1dee5e3cf87a4c8f8be6ea368554d346734
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 08:37:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/19b2f1dee5e3cf87a4c8f8be6ea368554d346734/build-end.log
Complete log : http://autobuild.buildroot.net/results/19b2f1dee5e3cf87a4c8f8be6ea368554d346734/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/19b2f1dee5e3cf87a4c8f8be6ea368554d346734/config
Defconfig : http://autobuild.buildroot.net/results/19b2f1dee5e3cf87a4c8f8be6ea368554d346734/defconfig
Build db58fe6765ed76151b97be2ed47bc7e35a8e6d14
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 08:50:39
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/db58fe6765ed76151b97be2ed47bc7e35a8e6d14/build-end.log
Complete log : http://autobuild.buildroot.net/results/db58fe6765ed76151b97be2ed47bc7e35a8e6d14/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/db58fe6765ed76151b97be2ed47bc7e35a8e6d14/config
Defconfig : http://autobuild.buildroot.net/results/db58fe6765ed76151b97be2ed47bc7e35a8e6d14/defconfig
Build a3409e9085c7add2dbef276719c86cf8ff12db48
==============================================
Status : NOK
Failure reason : host-python-2.7.3
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 09:38:22
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/a3409e9085c7add2dbef276719c86cf8ff12db48/build-end.log
Complete log : http://autobuild.buildroot.net/results/a3409e9085c7add2dbef276719c86cf8ff12db48/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a3409e9085c7add2dbef276719c86cf8ff12db48/config
Defconfig : http://autobuild.buildroot.net/results/a3409e9085c7add2dbef276719c86cf8ff12db48/defconfig
Build 61153e0a1a580c5a098d04d78c107164aa5d602d
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 09:58:21
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/61153e0a1a580c5a098d04d78c107164aa5d602d/build-end.log
Complete log : http://autobuild.buildroot.net/results/61153e0a1a580c5a098d04d78c107164aa5d602d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/61153e0a1a580c5a098d04d78c107164aa5d602d/config
Defconfig : http://autobuild.buildroot.net/results/61153e0a1a580c5a098d04d78c107164aa5d602d/defconfig
Build 8c20fdcc8690d5f4d25e23c266699df153ef51d6
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 10:45:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/8c20fdcc8690d5f4d25e23c266699df153ef51d6/build-end.log
Complete log : http://autobuild.buildroot.net/results/8c20fdcc8690d5f4d25e23c266699df153ef51d6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8c20fdcc8690d5f4d25e23c266699df153ef51d6/config
Defconfig : http://autobuild.buildroot.net/results/8c20fdcc8690d5f4d25e23c266699df153ef51d6/defconfig
Build a2eb4b96f00c1ba017817035382e80102faa6635
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 10:51:28
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/a2eb4b96f00c1ba017817035382e80102faa6635/build-end.log
Complete log : http://autobuild.buildroot.net/results/a2eb4b96f00c1ba017817035382e80102faa6635/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a2eb4b96f00c1ba017817035382e80102faa6635/config
Defconfig : http://autobuild.buildroot.net/results/a2eb4b96f00c1ba017817035382e80102faa6635/defconfig
Build d56429b5f743609c6c0af76a01d62eab59a9346c
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 11:08:46
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/d56429b5f743609c6c0af76a01d62eab59a9346c/build-end.log
Complete log : http://autobuild.buildroot.net/results/d56429b5f743609c6c0af76a01d62eab59a9346c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d56429b5f743609c6c0af76a01d62eab59a9346c/config
Defconfig : http://autobuild.buildroot.net/results/d56429b5f743609c6c0af76a01d62eab59a9346c/defconfig
Build 5381502dec46b53f2937fac08cbe8073f73ecce5
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 11:12:58
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=5a5eeae999150ec4dcb60d5847440fbb8fbdc341
End of log : http://autobuild.buildroot.net/results/5381502dec46b53f2937fac08cbe8073f73ecce5/build-end.log
Complete log : http://autobuild.buildroot.net/results/5381502dec46b53f2937fac08cbe8073f73ecce5/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5381502dec46b53f2937fac08cbe8073f73ecce5/config
Defconfig : http://autobuild.buildroot.net/results/5381502dec46b53f2937fac08cbe8073f73ecce5/defconfig
Build 1b8d23b439f139b782c37528ce7bbae1bf44b287
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 12:49:21
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/1b8d23b439f139b782c37528ce7bbae1bf44b287/build-end.log
Complete log : http://autobuild.buildroot.net/results/1b8d23b439f139b782c37528ce7bbae1bf44b287/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1b8d23b439f139b782c37528ce7bbae1bf44b287/config
Defconfig : http://autobuild.buildroot.net/results/1b8d23b439f139b782c37528ce7bbae1bf44b287/defconfig
Build 8c7376c59028674934bf91602c03e9835b657e2c
==============================================
Status : NOK
Failure reason : kexec-2.0.3
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 12:53:05
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/8c7376c59028674934bf91602c03e9835b657e2c/build-end.log
Complete log : http://autobuild.buildroot.net/results/8c7376c59028674934bf91602c03e9835b657e2c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8c7376c59028674934bf91602c03e9835b657e2c/config
Defconfig : http://autobuild.buildroot.net/results/8c7376c59028674934bf91602c03e9835b657e2c/defconfig
Build 46fd86754ba41445117543a63f76c7216583a6bb
==============================================
Status : NOK
Failure reason : ebtables-2.0.10-4
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 12:54:12
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/46fd86754ba41445117543a63f76c7216583a6bb/build-end.log
Complete log : http://autobuild.buildroot.net/results/46fd86754ba41445117543a63f76c7216583a6bb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/46fd86754ba41445117543a63f76c7216583a6bb/config
Defconfig : http://autobuild.buildroot.net/results/46fd86754ba41445117543a63f76c7216583a6bb/defconfig
Build 47b5a0b53bd9add8ef93e1d8b5f68d50c69dcca4
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 13:04:10
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/47b5a0b53bd9add8ef93e1d8b5f68d50c69dcca4/build-end.log
Complete log : http://autobuild.buildroot.net/results/47b5a0b53bd9add8ef93e1d8b5f68d50c69dcca4/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/47b5a0b53bd9add8ef93e1d8b5f68d50c69dcca4/config
Defconfig : http://autobuild.buildroot.net/results/47b5a0b53bd9add8ef93e1d8b5f68d50c69dcca4/defconfig
Build 41c433cc4901cf92c59295a2fcf921274b3c4f95
==============================================
Status : NOK
Failure reason : blackbox-0.70.1
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 13:36:44
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/41c433cc4901cf92c59295a2fcf921274b3c4f95/build-end.log
Complete log : http://autobuild.buildroot.net/results/41c433cc4901cf92c59295a2fcf921274b3c4f95/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/41c433cc4901cf92c59295a2fcf921274b3c4f95/config
Defconfig : http://autobuild.buildroot.net/results/41c433cc4901cf92c59295a2fcf921274b3c4f95/defconfig
Build bbd78dd68d88f8ba7d7592ba286447a8c81b97f6
==============================================
Status : NOK
Failure reason : valgrind-3.7.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 13:42:39
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/bbd78dd68d88f8ba7d7592ba286447a8c81b97f6/build-end.log
Complete log : http://autobuild.buildroot.net/results/bbd78dd68d88f8ba7d7592ba286447a8c81b97f6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/bbd78dd68d88f8ba7d7592ba286447a8c81b97f6/config
Defconfig : http://autobuild.buildroot.net/results/bbd78dd68d88f8ba7d7592ba286447a8c81b97f6/defconfig
Build 0ef0f42161eced68bcae0be80287f98a10fb8fe7
==============================================
Status : NOK
Failure reason : libxml2-2.8.0
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 13:44:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/0ef0f42161eced68bcae0be80287f98a10fb8fe7/build-end.log
Complete log : http://autobuild.buildroot.net/results/0ef0f42161eced68bcae0be80287f98a10fb8fe7/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/0ef0f42161eced68bcae0be80287f98a10fb8fe7/config
Defconfig : http://autobuild.buildroot.net/results/0ef0f42161eced68bcae0be80287f98a10fb8fe7/defconfig
Build af9761a7a3764e0d5e6050cab38c17ca3bdab346
==============================================
Status : NOK
Failure reason : madplay-0.15.2b
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 13:47:35
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/af9761a7a3764e0d5e6050cab38c17ca3bdab346/build-end.log
Complete log : http://autobuild.buildroot.net/results/af9761a7a3764e0d5e6050cab38c17ca3bdab346/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/af9761a7a3764e0d5e6050cab38c17ca3bdab346/config
Defconfig : http://autobuild.buildroot.net/results/af9761a7a3764e0d5e6050cab38c17ca3bdab346/defconfig
Build 19503818eef144cf17fcb7f0c9bd63a45e913a64
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 14:31:35
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/19503818eef144cf17fcb7f0c9bd63a45e913a64/build-end.log
Complete log : http://autobuild.buildroot.net/results/19503818eef144cf17fcb7f0c9bd63a45e913a64/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/19503818eef144cf17fcb7f0c9bd63a45e913a64/config
Defconfig : http://autobuild.buildroot.net/results/19503818eef144cf17fcb7f0c9bd63a45e913a64/defconfig
Build 84d211ee13d43de3a8097cd67d8dadeeae4ce90e
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 14:54:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/84d211ee13d43de3a8097cd67d8dadeeae4ce90e/build-end.log
Complete log : http://autobuild.buildroot.net/results/84d211ee13d43de3a8097cd67d8dadeeae4ce90e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/84d211ee13d43de3a8097cd67d8dadeeae4ce90e/config
Defconfig : http://autobuild.buildroot.net/results/84d211ee13d43de3a8097cd67d8dadeeae4ce90e/defconfig
Build eda421e45a2f5f07e83e4938e496f6a2807bdfd2
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 15:23:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/eda421e45a2f5f07e83e4938e496f6a2807bdfd2/build-end.log
Complete log : http://autobuild.buildroot.net/results/eda421e45a2f5f07e83e4938e496f6a2807bdfd2/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/eda421e45a2f5f07e83e4938e496f6a2807bdfd2/config
Defconfig : http://autobuild.buildroot.net/results/eda421e45a2f5f07e83e4938e496f6a2807bdfd2/defconfig
Build 5b64edfc0b73a2ce310fbfb37478e550a5a64c4b
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 15:50:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/5b64edfc0b73a2ce310fbfb37478e550a5a64c4b/build-end.log
Complete log : http://autobuild.buildroot.net/results/5b64edfc0b73a2ce310fbfb37478e550a5a64c4b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5b64edfc0b73a2ce310fbfb37478e550a5a64c4b/config
Defconfig : http://autobuild.buildroot.net/results/5b64edfc0b73a2ce310fbfb37478e550a5a64c4b/defconfig
Build cfc94ee0da5d4f7488c2f03558687da1ea06fd10
==============================================
Status : NOK
Failure reason : m4-1.4.16
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 16:44:14
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/cfc94ee0da5d4f7488c2f03558687da1ea06fd10/build-end.log
Complete log : http://autobuild.buildroot.net/results/cfc94ee0da5d4f7488c2f03558687da1ea06fd10/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/cfc94ee0da5d4f7488c2f03558687da1ea06fd10/config
Defconfig : http://autobuild.buildroot.net/results/cfc94ee0da5d4f7488c2f03558687da1ea06fd10/defconfig
Build 01247e4c10ea80832a05c82534aa30073569a5c3
==============================================
Status : NOK
Failure reason : php-5.3.19
Architecture : i686
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 17:00:15
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/01247e4c10ea80832a05c82534aa30073569a5c3/build-end.log
Complete log : http://autobuild.buildroot.net/results/01247e4c10ea80832a05c82534aa30073569a5c3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/01247e4c10ea80832a05c82534aa30073569a5c3/config
Defconfig : http://autobuild.buildroot.net/results/01247e4c10ea80832a05c82534aa30073569a5c3/defconfig
Build 3d7e9e59a08b766279da9c04766741056eab40f8
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 17:07:50
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/3d7e9e59a08b766279da9c04766741056eab40f8/build-end.log
Complete log : http://autobuild.buildroot.net/results/3d7e9e59a08b766279da9c04766741056eab40f8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3d7e9e59a08b766279da9c04766741056eab40f8/config
Defconfig : http://autobuild.buildroot.net/results/3d7e9e59a08b766279da9c04766741056eab40f8/defconfig
Build b58f5941bed21064267e2f767bd68c3b6234049a
==============================================
Status : NOK
Failure reason : ltp-testsuite-20101031
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 17:46:44
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/b58f5941bed21064267e2f767bd68c3b6234049a/build-end.log
Complete log : http://autobuild.buildroot.net/results/b58f5941bed21064267e2f767bd68c3b6234049a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/b58f5941bed21064267e2f767bd68c3b6234049a/config
Defconfig : http://autobuild.buildroot.net/results/b58f5941bed21064267e2f767bd68c3b6234049a/defconfig
Build 00d497a95512dad797ff6e74775f7d8b1d91ba06
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 18:19:51
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=fa0cea21cdee6c5ac46fba3cceb989419083a432
End of log : http://autobuild.buildroot.net/results/00d497a95512dad797ff6e74775f7d8b1d91ba06/build-end.log
Complete log : http://autobuild.buildroot.net/results/00d497a95512dad797ff6e74775f7d8b1d91ba06/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/00d497a95512dad797ff6e74775f7d8b1d91ba06/config
Defconfig : http://autobuild.buildroot.net/results/00d497a95512dad797ff6e74775f7d8b1d91ba06/defconfig
Build 1eddd888dcd1f0452c6b459438b42ac2110f4c0d
==============================================
Status : NOK
Failure reason : libroxml-2.2.1
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 18:31:38
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=c0507db22c46f4a19398e5476d62e4e242075250
End of log : http://autobuild.buildroot.net/results/1eddd888dcd1f0452c6b459438b42ac2110f4c0d/build-end.log
Complete log : http://autobuild.buildroot.net/results/1eddd888dcd1f0452c6b459438b42ac2110f4c0d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1eddd888dcd1f0452c6b459438b42ac2110f4c0d/config
Defconfig : http://autobuild.buildroot.net/results/1eddd888dcd1f0452c6b459438b42ac2110f4c0d/defconfig
Build 7c4d0745bbe14c7f7972e9325bef07f9a26c094f
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 18:35:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=fa0cea21cdee6c5ac46fba3cceb989419083a432
End of log : http://autobuild.buildroot.net/results/7c4d0745bbe14c7f7972e9325bef07f9a26c094f/build-end.log
Complete log : http://autobuild.buildroot.net/results/7c4d0745bbe14c7f7972e9325bef07f9a26c094f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7c4d0745bbe14c7f7972e9325bef07f9a26c094f/config
Defconfig : http://autobuild.buildroot.net/results/7c4d0745bbe14c7f7972e9325bef07f9a26c094f/defconfig
Build ce7bb432c6eda10f888a613a5d10422625a4d2e4
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 19:00:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=fa0cea21cdee6c5ac46fba3cceb989419083a432
End of log : http://autobuild.buildroot.net/results/ce7bb432c6eda10f888a613a5d10422625a4d2e4/build-end.log
Complete log : http://autobuild.buildroot.net/results/ce7bb432c6eda10f888a613a5d10422625a4d2e4/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ce7bb432c6eda10f888a613a5d10422625a4d2e4/config
Defconfig : http://autobuild.buildroot.net/results/ce7bb432c6eda10f888a613a5d10422625a4d2e4/defconfig
Build 9f4c645bfcf49414aa89a54df4161b2bae4f0b65
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 19:20:59
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=fa0cea21cdee6c5ac46fba3cceb989419083a432
End of log : http://autobuild.buildroot.net/results/9f4c645bfcf49414aa89a54df4161b2bae4f0b65/build-end.log
Complete log : http://autobuild.buildroot.net/results/9f4c645bfcf49414aa89a54df4161b2bae4f0b65/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/9f4c645bfcf49414aa89a54df4161b2bae4f0b65/config
Defconfig : http://autobuild.buildroot.net/results/9f4c645bfcf49414aa89a54df4161b2bae4f0b65/defconfig
Build 69dc76575f0180e49195f3ae0714f9523f4d59df
==============================================
Status : NOK
Failure reason : directfb-1.4.17
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 19:59:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=ac3ee237d96731b869eeca435e1b8351aacd245b
End of log : http://autobuild.buildroot.net/results/69dc76575f0180e49195f3ae0714f9523f4d59df/build-end.log
Complete log : http://autobuild.buildroot.net/results/69dc76575f0180e49195f3ae0714f9523f4d59df/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/69dc76575f0180e49195f3ae0714f9523f4d59df/config
Defconfig : http://autobuild.buildroot.net/results/69dc76575f0180e49195f3ae0714f9523f4d59df/defconfig
Build d9e7de02df84afc5943f013907b99ca16ba78837
==============================================
Status : NOK
Failure reason : libhid-0.2.16
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 20:51:32
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=ac3ee237d96731b869eeca435e1b8351aacd245b
End of log : http://autobuild.buildroot.net/results/d9e7de02df84afc5943f013907b99ca16ba78837/build-end.log
Complete log : http://autobuild.buildroot.net/results/d9e7de02df84afc5943f013907b99ca16ba78837/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d9e7de02df84afc5943f013907b99ca16ba78837/config
Defconfig : http://autobuild.buildroot.net/results/d9e7de02df84afc5943f013907b99ca16ba78837/defconfig
Build d7863757511ab58a0b9ad0a4a2463427fe0b7fb7
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 21:05:00
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/d7863757511ab58a0b9ad0a4a2463427fe0b7fb7/build-end.log
Complete log : http://autobuild.buildroot.net/results/d7863757511ab58a0b9ad0a4a2463427fe0b7fb7/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d7863757511ab58a0b9ad0a4a2463427fe0b7fb7/config
Defconfig : http://autobuild.buildroot.net/results/d7863757511ab58a0b9ad0a4a2463427fe0b7fb7/defconfig
Build ce30832634f7a0aa6a258ce285aec4d0664a3626
==============================================
Status : NOK
Failure reason : xapp_xmh-1.0.2
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 21:33:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/ce30832634f7a0aa6a258ce285aec4d0664a3626/build-end.log
Complete log : http://autobuild.buildroot.net/results/ce30832634f7a0aa6a258ce285aec4d0664a3626/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ce30832634f7a0aa6a258ce285aec4d0664a3626/config
Defconfig : http://autobuild.buildroot.net/results/ce30832634f7a0aa6a258ce285aec4d0664a3626/defconfig
Build 6da2816238cf93d68c6e22891b583dc2b25e258e
==============================================
Status : NOK
Failure reason : boost-1.49.0
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-05 22:09:17
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/6da2816238cf93d68c6e22891b583dc2b25e258e/build-end.log
Complete log : http://autobuild.buildroot.net/results/6da2816238cf93d68c6e22891b583dc2b25e258e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6da2816238cf93d68c6e22891b583dc2b25e258e/config
Defconfig : http://autobuild.buildroot.net/results/6da2816238cf93d68c6e22891b583dc2b25e258e/defconfig
Build 72938d2c089a3d64ecc8b73c324a68f8a240c0de
==============================================
Status : NOK
Failure reason : squid-3.2.3
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 22:09:39
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/72938d2c089a3d64ecc8b73c324a68f8a240c0de/build-end.log
Complete log : http://autobuild.buildroot.net/results/72938d2c089a3d64ecc8b73c324a68f8a240c0de/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/72938d2c089a3d64ecc8b73c324a68f8a240c0de/config
Defconfig : http://autobuild.buildroot.net/results/72938d2c089a3d64ecc8b73c324a68f8a240c0de/defconfig
Build c97cb34529fe7af0bc8d30a67ed464e4fc4a0ead
==============================================
Status : NOK
Failure reason : neard-0.8
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 22:10:25
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/c97cb34529fe7af0bc8d30a67ed464e4fc4a0ead/build-end.log
Complete log : http://autobuild.buildroot.net/results/c97cb34529fe7af0bc8d30a67ed464e4fc4a0ead/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c97cb34529fe7af0bc8d30a67ed464e4fc4a0ead/config
Defconfig : http://autobuild.buildroot.net/results/c97cb34529fe7af0bc8d30a67ed464e4fc4a0ead/defconfig
Build 20e0342c717588239ede186595d385ade7de3627
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 22:29:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/20e0342c717588239ede186595d385ade7de3627/build-end.log
Complete log : http://autobuild.buildroot.net/results/20e0342c717588239ede186595d385ade7de3627/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/20e0342c717588239ede186595d385ade7de3627/config
Defconfig : http://autobuild.buildroot.net/results/20e0342c717588239ede186595d385ade7de3627/defconfig
Build fc269193b073ad203ebe0811699499724671e72a
==============================================
Status : NOK
Failure reason : can-utils-836d3cc0122ce31a1b732d369cbd27b690c3110f
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 22:48:06
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/fc269193b073ad203ebe0811699499724671e72a/build-end.log
Complete log : http://autobuild.buildroot.net/results/fc269193b073ad203ebe0811699499724671e72a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fc269193b073ad203ebe0811699499724671e72a/config
Defconfig : http://autobuild.buildroot.net/results/fc269193b073ad203ebe0811699499724671e72a/defconfig
Build e57940aaf5aa8e709786bb51c80153c23c4b8da9
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-05 23:00:21
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/e57940aaf5aa8e709786bb51c80153c23c4b8da9/build-end.log
Complete log : http://autobuild.buildroot.net/results/e57940aaf5aa8e709786bb51c80153c23c4b8da9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/e57940aaf5aa8e709786bb51c80153c23c4b8da9/config
Defconfig : http://autobuild.buildroot.net/results/e57940aaf5aa8e709786bb51c80153c23c4b8da9/defconfig
Build bd0172d8dd47ca057ec0c4aee1150e9add73879f
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-05 23:00:35
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/bd0172d8dd47ca057ec0c4aee1150e9add73879f/build-end.log
Complete log : http://autobuild.buildroot.net/results/bd0172d8dd47ca057ec0c4aee1150e9add73879f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/bd0172d8dd47ca057ec0c4aee1150e9add73879f/config
Defconfig : http://autobuild.buildroot.net/results/bd0172d8dd47ca057ec0c4aee1150e9add73879f/defconfig
Build fbd098cc461b6a859481b5b9527b38e26475d538
==============================================
Status : NOK
Failure reason : neard-0.8
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 23:40:13
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/fbd098cc461b6a859481b5b9527b38e26475d538/build-end.log
Complete log : http://autobuild.buildroot.net/results/fbd098cc461b6a859481b5b9527b38e26475d538/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fbd098cc461b6a859481b5b9527b38e26475d538/config
Defconfig : http://autobuild.buildroot.net/results/fbd098cc461b6a859481b5b9527b38e26475d538/defconfig
Build f08a967e3aca7c003b2e9eb12c6111b7bc0b194f
==============================================
Status : NOK
Failure reason : classpath-0.98
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-05 23:58:06
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7f77121fdde5a0c16d9b6968c71e982d3e953d25
End of log : http://autobuild.buildroot.net/results/f08a967e3aca7c003b2e9eb12c6111b7bc0b194f/build-end.log
Complete log : http://autobuild.buildroot.net/results/f08a967e3aca7c003b2e9eb12c6111b7bc0b194f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f08a967e3aca7c003b2e9eb12c6111b7bc0b194f/config
Defconfig : http://autobuild.buildroot.net/results/f08a967e3aca7c003b2e9eb12c6111b7bc0b194f/defconfig
--
http://autobuild.buildroot.net
^ permalink raw reply
* [Buildroot] [PATCH] pkg-download.mk: Fix shallow clone
From: Arnout Vandecappelle @ 2012-12-06 7:03 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CANxTyt74ytgBNHb8koKuVTjei5sQP2FpUrwawMuG17=fAK3bXw@mail.gmail.com>
On 06/12/12 03:14, Danomi Manchego wrote:
> So I'm wondering why the recent changes in this area used grep at all, rather than asking ls-remote directly. I.e.:
>
> ((test `git ls-remote $($(PKG)_SITE) $($(PKG)_DL_VERSION) | cut -f 2-` && \
>
> If there is feedback that the above is desirable, then I can send in the patch.
The argument of test should be quoted to avoid getting the same problem again
when the ref matches more than once for some reason.
Or even better: use the exit code:
git ls-remote --exit-code $($(PKG)_SITE) $($(PKG)_DL_VERSION) > /dev/null 2>&1 && \
(hopefully the --exit-code option exists in older gits as well...)
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] package/crosstool-ng: bumpimg default GCC version to 4.6.3
From: Carsten Schoenert @ 2012-12-06 6:03 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87lidc86ni.fsf@dell.be.48ers.dk>
Hello Peter, hello Yann,
Am 05.12.2012 23:40, schrieb Peter Korsgaard:
> Hmm, don't you also need to set CT_CC_V_4_6_3=y (and unset
> CT_CC_V_4_4_6)?
of course you are right- :)
That's why i wrote I don't have tested it (yet). Hopefully later this
day i found some time to correct this. I will resend this patch.
Regards
Carsten
^ permalink raw reply
* [Buildroot] [PATCH] xtensa: add -mlongcalls to CFLAGS for xtensa
From: Chris Zankel @ 2012-12-06 5:36 UTC (permalink / raw)
To: buildroot
The longcalls option allows calls across a greater range of addresses.
This option may degrade both code size and performance, but
the linker can generally optimize away the unnecessary overhead
when a call ends up within range
Signed-off-by: Chris Zankel <chris@zankel.net>
---
package/Makefile.in | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/package/Makefile.in b/package/Makefile.in
index 9fdc745..98e7f7c 100644
--- a/package/Makefile.in
+++ b/package/Makefile.in
@@ -56,6 +56,15 @@ TARGET_ABI+=-mabi=spe -mfloat-gprs=double -Wa,-me500mc
endif
endif
+# Use longcalls option for Xtensa globally.
+# The 'longcalls' option allows calls across a greater range of addresses,
+# and is required for some packages. While this option can degrade both
+# code size and performance, the linker can usually optimize away the
+# overhead when a call ends up within a certain range.
+ifeq ($(BR2_xtensa),y)
+TARGET_ABI += -mlongcalls
+endif
+
STAGING_DIR=$(HOST_DIR)/usr/$(GNU_TARGET_NAME)/sysroot
TARGET_OPTIMIZATION:=$(call qstrip,$(BR2_TARGET_OPTIMIZATION))
--
1.7.9.5
^ permalink raw reply related
* [Buildroot] [PATCH] pkg-download.mk: Fix shallow clone
From: Danomi Manchego @ 2012-12-06 2:14 UTC (permalink / raw)
To: buildroot
In-Reply-To: <8738zo7835.fsf@dell.be.48ers.dk>
Hi all,
I ran into a minor problem with the shallow clone changes. The test for
doing a git shallow clone uses a grep. From pkg-download.mk:
((test `git ls-remote $($(PKG)_SITE) | cut -f 2- | grep
$($(PKG)_DL_VERSION)` && \
If the grep returns multiple matches, then the "test" will fail, and then
go on to do a full clone. The failure prints out:
bash: test: too many arguments
It's because the grep filter matches multiple items in the ls-remote
output. For example, if you try to get your kernel from "
http://arago-project.org/git/projects/linux-davinci.git", specifying a
version of "03.22.00.02", then you will get two matches:
$ git ls-remote
http://arago-project.org/git/projects/linux-davinci.git| cut -f 2- |
grep 03.22.00.02
refs/heads/03.22.00.02
refs/tags/DEV_DAVINCIPSP_03.22.00.02
There are ways to massage the grep to do better (maybe use "grep -q", or
grep for "/string$" instead of just "string"), but the ls-remote command
seems to take a ref directly. I.e.
$ git ls-remote
http://arago-project.org/git/projects/linux-davinci.git03.22.00.02 |
cut -f 2-
refs/heads/03.22.00.02
$
$ git ls-remote
http://arago-project.org/git/projects/linux-davinci.gitDEV_DAVINCIPSP_03.22.00.02
| cut -f 2-
refs/tags/DEV_DAVINCIPSP_03.22.00.02
$
$ git ls-remote
http://arago-project.org/git/projects/linux-davinci.gitJUNK | cut -f
2-
$
So I'm wondering why the recent changes in this area used grep at all,
rather than asking ls-remote directly. I.e.:
((test `git ls-remote $($(PKG)_SITE) $($(PKG)_DL_VERSION) | cut -f 2-` && \
If there is feedback that the above is desirable, then I can send in the
patch.
Danomi -
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121205/6418600c/attachment.html>
^ permalink raw reply
* [Buildroot] [PATCH] tcllib: new package
From: Thomas Petazzoni @ 2012-12-05 22:48 UTC (permalink / raw)
To: buildroot
In-Reply-To: <201212052248.46769.yann.morin.1998@free.fr>
Dear Yann E. MORIN,
On Wed, 5 Dec 2012 22:48:46 +0100, Yann E. MORIN wrote:
> > +define TCLLIB_INSTALL_TARGET_CMDS
> > + (cd $(@D); \
> > + tclsh installer.tcl \
>
> Since you're using tclsh, you may also need to depend on host-tcl.
And therefore use $(HOST_DIR)/usr/bin/tclsh.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [Bug 5750] buildroot-2012.11 while building X11 for ARM, errors on xlib_libX11-1.4.2
From: Peter Korsgaard @ 2012-12-05 22:40 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121205222809.28faea35@skate>
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Arnout> We should at least have a check for that...
>>
>> Indeed. I'm looking into adding one.
Thomas> Well, I think we should rather fix the problem. I have a fix
Thomas> that works for most cases, except for the stupid libglib2
Thomas> package that generates incorrect .la files...
Ahh, even better.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH] package/crosstool-ng: bumpimg default GCC version to 4.6.3
From: Peter Korsgaard @ 2012-12-05 22:40 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354736519-18173-2-git-send-email-c.schoenert@t-online.de>
>>>>> "Carsten" == Carsten Schoenert <c.schoenert@gmail.com> writes:
Carsten> From: Carsten Schoenert <c.schoenert@t-online.de>
Carsten> This bumps the GCC version from 4.4.6 to 4.6.3 to for
Carsten> *.config-eglibc
Carsten> *.config-glibc
Carsten> *.config-uClibc
Carsten> be equal to the default GCC setting in buildroot as well in addition to
Carsten> commit b855154ee8683e87afa08c6cc50b716d22879922.
Carsten> Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
Carsten> ---
Carsten> toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc | 2 +-
Carsten> toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc | 2 +-
Carsten> toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc | 2 +-
Carsten> 3 files changed, 3 insertions(+), 3 deletions(-)
Carsten> diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
Carsten> index 1b523ec..9ad1c5b 100644
Carsten> --- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
Carsten> +++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
Carsten> @@ -265,7 +265,7 @@ CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
Carsten> # C compiler
Carsten> #
Carsten> CT_CC="gcc"
Carsten> -CT_CC_VERSION="4.4.6"
Carsten> +CT_CC_VERSION="4.6.3"
Carsten> CT_CC_gcc=y
Carsten> # CT_CC_V_4_7_2 is not set
Carsten> # CT_CC_V_4_6_3 is not set
Hmm, don't you also need to set CT_CC_V_4_6_3=y (and unset
CT_CC_V_4_4_6)?
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH] tcllib: new package
From: Yann E. MORIN @ 2012-12-05 21:48 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354741542-6079-2-git-send-email-zinosat@tiscali.it>
Davide, All,
On Wednesday 05 December 2012 Davide Viti wrote:
>
> Signed-off-by: Davide Viti <zinosat@tiscali.it>
> ---
> package/Config.in | 5 +++++
> package/tcllib/Config.in | 12 ++++++++++++
> package/tcllib/tcllib.mk | 23 +++++++++++++++++++++++
> 3 files changed, 40 insertions(+), 0 deletions(-)
> create mode 100644 package/tcllib/Config.in
> create mode 100644 package/tcllib/tcllib.mk
>
> diff --git a/package/tcllib/tcllib.mk b/package/tcllib/tcllib.mk
> new file mode 100644
> index 0000000..2e85dc2
> --- /dev/null
> +++ b/package/tcllib/tcllib.mk
> @@ -0,0 +1,23 @@
> +#############################################################
> +#
> +# tcllib
> +#
> +#############################################################
> +TCLLIB_VERSION = 1.13
> +TCLLIB_SOURCE = tcllib-$(TCLLIB_VERSION).tar.gz
> +TCLLIB_SITE = http://sourceforge.net/projects/tcllib/files/tcllib/$(TCLLIB_VERSION)/
> +TCLLIB_LICENSE = BSD-2c
> +TCLLIB_LICENSE_FILES = license.terms
> +TCLLIB_DEPENDENCIES = tcl
> +
> +define TCLLIB_INSTALL_TARGET_CMDS
> + (cd $(@D); \
> + tclsh installer.tcl \
Since you're using tclsh, you may also need to depend on host-tcl.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [PATCH] tcllib: new package
From: Yann E. MORIN @ 2012-12-05 21:39 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354741542-6079-2-git-send-email-zinosat@tiscali.it>
Davide, All,
On Wednesday 05 December 2012 Davide Viti wrote:
> Signed-off-by: Davide Viti <zinosat@tiscali.it>
> ---
> package/Config.in | 5 +++++
> package/tcllib/Config.in | 12 ++++++++++++
> package/tcllib/tcllib.mk | 23 +++++++++++++++++++++++
> 3 files changed, 40 insertions(+), 0 deletions(-)
> create mode 100644 package/tcllib/Config.in
> create mode 100644 package/tcllib/tcllib.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index e759620..6d3f4fb 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -311,6 +311,11 @@ endmenu
> endif
> source "package/ruby/Config.in"
> source "package/tcl/Config.in"
> +if BR2_PACKAGE_TCL
> +menu "tcl libraries/modules"
> +source "package/tcllib/Config.in"
> +endmenu
> +endif
> endmenu
>
> menu "Libraries"
> diff --git a/package/tcllib/Config.in b/package/tcllib/Config.in
> new file mode 100644
> index 0000000..cf65a9e
> --- /dev/null
> +++ b/package/tcllib/Config.in
> @@ -0,0 +1,12 @@
> +config BR2_PACKAGE_TCLLIB
> + bool "tcllib"
> + depends on BR2_PACKAGE_TCL
Technically, this is not needed, because you already have a 'if TCL'
in package/Config.in (see above)
> + help
> + Tcllib is a collection of utility modules for Tcl. These
> + modules provide a wide variety of functionality, from
> + implementations of standard data structures to
> + implementations of common networking protocols. The intent
> + is to collect commonly used function into a single library,
> + which users can rely on to be available and stable
> +
> + http://tcl.activestate.com/software/tcllib/
> diff --git a/package/tcllib/tcllib.mk b/package/tcllib/tcllib.mk
> new file mode 100644
> index 0000000..2e85dc2
> --- /dev/null
> +++ b/package/tcllib/tcllib.mk
> @@ -0,0 +1,23 @@
> +#############################################################
> +#
> +# tcllib
> +#
> +#############################################################
> +TCLLIB_VERSION = 1.13
> +TCLLIB_SOURCE = tcllib-$(TCLLIB_VERSION).tar.gz
> +TCLLIB_SITE = http://sourceforge.net/projects/tcllib/files/tcllib/$(TCLLIB_VERSION)/
Should be:
http://downloads.sourceforge.net/project/tcllib/tcllib/$(TCLLIB_VERSION)/
Also, there is a .tar.bz2, which is ~25% smaller than the .tar.gz, it will
be (a bit) faster to download.
> +TCLLIB_LICENSE = BSD-2c
> +TCLLIB_LICENSE_FILES = license.terms
This does not really look like the BSD-2c I know of, and that are
listed there: https://spdx.org/licenses/
> +TCLLIB_DEPENDENCIES = tcl
> +
> +define TCLLIB_INSTALL_TARGET_CMDS
> + (cd $(@D); \
> + tclsh installer.tcl \
> + -no-examples -no-html -no-pkgs -no-wait \
> + -no-gui -no-apps -no-nroff \
> + -pkg-path $(TARGET_DIR)/usr/lib/tcl8.4 \
> + )
> +endef
> +
> +$(eval $(autotools-package))
> +$(eval $(host-autotools-package))
Why the host one? Is it used by any other package at build-time?
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [Bug 5750] buildroot-2012.11 while building X11 for ARM, errors on xlib_libX11-1.4.2
From: Thomas Petazzoni @ 2012-12-05 21:28 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87txs08adj.fsf@dell.be.48ers.dk>
Dear Peter Korsgaard,
On Wed, 05 Dec 2012 13:19:52 -0800, Peter Korsgaard wrote:
> >> For some complicated reason, using Buildroot in a directory stored
> >> under /usr doesn't work. We will work on fixing that, but in the
> >> mean time, please build from /home/something, /opt or anything
> >> else, but not from a subdirectory of /usr.
>
> Arnout> We should at least have a check for that...
>
> Indeed. I'm looking into adding one.
Well, I think we should rather fix the problem. I have a fix that works
for most cases, except for the stupid libglib2 package that generates
incorrect .la files...
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Peter Korsgaard @ 2012-12-05 21:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121205212703.98596423e9136f86fd8542b9@kinali.ch>
>>>>> "Attila" == Attila Kinali <attila@kinali.ch> writes:
>> Not really. I don't have any imx hw here. Are you able to test it?
Attila> I have an i.mx23 EVK at work. So i guess i could test it.
Great, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [Bug 5750] buildroot-2012.11 while building X11 for ARM, errors on xlib_libX11-1.4.2
From: Peter Korsgaard @ 2012-12-05 21:19 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50BF826F.4060004@mind.be>
>>>>> "Arnout" == Arnout Vandecappelle <arnout@mind.be> writes:
Hi,
>> For some complicated reason, using Buildroot in a directory stored
>> under /usr doesn't work. We will work on fixing that, but in the
>> mean time, please build from /home/something, /opt or anything else,
>> but not from a subdirectory of /usr.
Arnout> We should at least have a check for that...
Indeed. I'm looking into adding one.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH] tcllib: new package
From: Davide Viti @ 2012-12-05 21:05 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354741542-6079-1-git-send-email-zinosat@tiscali.it>
Signed-off-by: Davide Viti <zinosat@tiscali.it>
---
package/Config.in | 5 +++++
package/tcllib/Config.in | 12 ++++++++++++
package/tcllib/tcllib.mk | 23 +++++++++++++++++++++++
3 files changed, 40 insertions(+), 0 deletions(-)
create mode 100644 package/tcllib/Config.in
create mode 100644 package/tcllib/tcllib.mk
diff --git a/package/Config.in b/package/Config.in
index e759620..6d3f4fb 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -311,6 +311,11 @@ endmenu
endif
source "package/ruby/Config.in"
source "package/tcl/Config.in"
+if BR2_PACKAGE_TCL
+menu "tcl libraries/modules"
+source "package/tcllib/Config.in"
+endmenu
+endif
endmenu
menu "Libraries"
diff --git a/package/tcllib/Config.in b/package/tcllib/Config.in
new file mode 100644
index 0000000..cf65a9e
--- /dev/null
+++ b/package/tcllib/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_TCLLIB
+ bool "tcllib"
+ depends on BR2_PACKAGE_TCL
+ help
+ Tcllib is a collection of utility modules for Tcl. These
+ modules provide a wide variety of functionality, from
+ implementations of standard data structures to
+ implementations of common networking protocols. The intent
+ is to collect commonly used function into a single library,
+ which users can rely on to be available and stable
+
+ http://tcl.activestate.com/software/tcllib/
diff --git a/package/tcllib/tcllib.mk b/package/tcllib/tcllib.mk
new file mode 100644
index 0000000..2e85dc2
--- /dev/null
+++ b/package/tcllib/tcllib.mk
@@ -0,0 +1,23 @@
+#############################################################
+#
+# tcllib
+#
+#############################################################
+TCLLIB_VERSION = 1.13
+TCLLIB_SOURCE = tcllib-$(TCLLIB_VERSION).tar.gz
+TCLLIB_SITE = http://sourceforge.net/projects/tcllib/files/tcllib/$(TCLLIB_VERSION)/
+TCLLIB_LICENSE = BSD-2c
+TCLLIB_LICENSE_FILES = license.terms
+TCLLIB_DEPENDENCIES = tcl
+
+define TCLLIB_INSTALL_TARGET_CMDS
+ (cd $(@D); \
+ tclsh installer.tcl \
+ -no-examples -no-html -no-pkgs -no-wait \
+ -no-gui -no-apps -no-nroff \
+ -pkg-path $(TARGET_DIR)/usr/lib/tcl8.4 \
+ )
+endef
+
+$(eval $(autotools-package))
+$(eval $(host-autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH] tcllib: new package
From: Davide Viti @ 2012-12-05 21:05 UTC (permalink / raw)
To: buildroot
Hi,
the attached patch adds the tcllib package.
This is my first experience with packaging for buildroot, so please
review it. Do not esitate to ask for fixes if you find any issues.
Note that I've packaged version 1.13 and a newer version has been
released: I've used this in a project and feel safer to release this.
regards,
Davide
^ permalink raw reply
* [Buildroot] [PATCH] package/crosstool-ng: bumpimg default GCC version to 4.6.3
From: Yann E. MORIN @ 2012-12-05 20:49 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354736519-18173-2-git-send-email-c.schoenert@t-online.de>
Carsten, All,
On Wednesday 05 December 2012 Carsten Schoenert wrote:
> From: Carsten Schoenert <c.schoenert@t-online.de>
>
> This bumps the GCC version from 4.4.6 to 4.6.3 to for
> *.config-eglibc
> *.config-glibc
> *.config-uClibc
> be equal to the default GCC setting in buildroot as well in addition to
> commit b855154ee8683e87afa08c6cc50b716d22879922.
>
> Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Sigh, Peter was too fast applying your previous patch, I had no time to
review it, so I had no chance to ack it too. Thanks for doing the update.
No, Peter, that's not a pledge for you to stop applying patches fast! ;-)
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Attila Kinali @ 2012-12-05 20:27 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87k3sw9yt1.fsf@dell.be.48ers.dk>
On Wed, 05 Dec 2012 09:46:50 -0800
Peter Korsgaard <jacmet@uclibc.org> wrote:
> >>>>> "Attila" == Attila Kinali <attila@kinali.ch> writes:
>
> >> [Buildroot] [PATCH 2/2] u-boot: add support for u-boot.sb file format
> >>
> >> It was more complete than this one, because it included the dependency
> >> on host-elftosb, which is needed to bring the elftosb tool built by
> >> Buildroot before U-Boot uses it to generate the .sb image.
>
> Attila> Any reason why it has not gotten into the git repo?
>
> Not really. I don't have any imx hw here. Are you able to test it?
I have an i.mx23 EVK at work. So i guess i could test it.
Attila Kinali
--
There is no secret ingredient
-- Po, Kung Fu Panda
^ permalink raw reply
* [Buildroot] Qt library difference between E.so and just .so
From: Santhosh Ramani @ 2012-12-05 20:07 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CADKZYY+HDpGpJKznaRWBSthrsHhOvxaJtHBr6ou3Gz5RNrxcdA@mail.gmail.com>
Hello Guys,
Nevermind..I found the issue, needed to export few variables.
thanks a lot, how do I mark this thread as solved??
Regards
Santhosh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121205/dae3526e/attachment.html>
^ permalink raw reply
* [Buildroot] [PATCH] package/crosstool-ng: bumpimg default GCC version to 4.6.3
From: Carsten Schoenert @ 2012-12-05 19:41 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354736519-18173-1-git-send-email-c.schoenert@t-online.de>
From: Carsten Schoenert <c.schoenert@t-online.de>
This bumps the GCC version from 4.4.6 to 4.6.3 to for
*.config-eglibc
*.config-glibc
*.config-uClibc
be equal to the default GCC setting in buildroot as well in addition to
commit b855154ee8683e87afa08c6cc50b716d22879922.
Signed-off-by: Carsten Schoenert <c.schoenert@t-online.de>
---
toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc | 2 +-
toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc | 2 +-
toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
index 1b523ec..9ad1c5b 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-eglibc
@@ -265,7 +265,7 @@ CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
# C compiler
#
CT_CC="gcc"
-CT_CC_VERSION="4.4.6"
+CT_CC_VERSION="4.6.3"
CT_CC_gcc=y
# CT_CC_V_4_7_2 is not set
# CT_CC_V_4_6_3 is not set
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
index 026c7fd..f220287 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
@@ -265,7 +265,7 @@ CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
# C compiler
#
CT_CC="gcc"
-CT_CC_VERSION="4.4.6"
+CT_CC_VERSION="4.6.3"
CT_CC_gcc=y
# CT_CC_V_4_7_2 is not set
# CT_CC_V_4_6_3 is not set
diff --git a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
index 8ad481f..cede4ad 100644
--- a/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
+++ b/toolchain/toolchain-crosstool-ng/crosstool-ng.config-uClibc
@@ -264,7 +264,7 @@ CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
# C compiler
#
CT_CC="gcc"
-CT_CC_VERSION="4.4.6"
+CT_CC_VERSION="4.6.3"
CT_CC_gcc=y
# CT_CC_V_4_7_2 is not set
# CT_CC_V_4_6_3 is not set
--
1.7.10.4
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox