* [Buildroot] [PATCH] bmon: needs mmu
From: Gustavo Zacarias @ 2012-12-09 14:13 UTC (permalink / raw)
To: buildroot
Fixes
http://autobuild.buildroot.net/results/673b0e9a1ba75123ba2c59df8ad81550170fffef
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
package/bmon/Config.in | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/package/bmon/Config.in b/package/bmon/Config.in
index 9692118..61d72f0 100644
--- a/package/bmon/Config.in
+++ b/package/bmon/Config.in
@@ -1,6 +1,7 @@
config BR2_PACKAGE_BMON
bool "bmon"
depends on BR2_INET_IPV6
+ depends on BR2_USE_MMU # fork()
help
Linux bandwidth monitor
--
1.7.8.6
^ permalink raw reply related
* [Buildroot] [PATCH] sane-backends: fix documentation build failure
From: Gustavo Zacarias @ 2012-12-09 14:35 UTC (permalink / raw)
To: buildroot
Disable documentation build, it seems to break with older
texlive/kpathsea versions, fixes:
http://autobuild.buildroot.net/results/44327b543d8918929bf252c5284e8691fda87fd0/
Also switch to alioth mirror since the original tarball is gone from the
regular site when 1.0.23 was released.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
package/sane-backends/sane-backends.mk | 8 +++++++-
1 files changed, 7 insertions(+), 1 deletions(-)
diff --git a/package/sane-backends/sane-backends.mk b/package/sane-backends/sane-backends.mk
index 56ce82d..496dca4 100644
--- a/package/sane-backends/sane-backends.mk
+++ b/package/sane-backends/sane-backends.mk
@@ -5,7 +5,7 @@
#############################################################
SANE_BACKENDS_VERSION = 1.0.22
SANE_BACKENDS_SOURCE = sane-backends-$(SANE_BACKENDS_VERSION).tar.gz
-SANE_BACKENDS_SITE = ftp://ftp2.sane-project.org/pub/sane/sane-backends-$(SANE_BACKENDS_VERSION)
+SANE_BACKENDS_SITE = https://alioth.debian.org/frs/download.php/3503
ifeq ($(BR2_PACKAGE_LIBUSB),y)
SANE_BACKENDS_DEPENDENCIES += libusb
@@ -37,4 +37,10 @@ else
SANE_BACKENDS_CONF_OPT += --without-snmp
endif
+define SANE_BACKENDS_DISABLE_DOCS
+ $(SED) 's/ doc//' $(@D)/Makefile
+endef
+
+SANE_BACKENDS_POST_CONFIGURE_HOOKS += SANE_BACKENDS_DISABLE_DOCS
+
$(eval $(autotools-package))
--
1.7.8.6
^ permalink raw reply related
* [Buildroot] [PATCH] tcl: add license information
From: Arnout Vandecappelle @ 2012-12-09 14:59 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354914901-4480-2-git-send-email-zinosat@tiscali.it>
On 07/12/12 22:15, Davide Viti wrote:
>
> Signed-off-by: Davide Viti<zinosat@tiscali.it>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Regards,
Arnout
> ---
> package/tcl/tcl.mk | 2 ++
> 1 files changed, 2 insertions(+), 0 deletions(-)
>
> diff --git a/package/tcl/tcl.mk b/package/tcl/tcl.mk
> index 606042e..ec089ee 100644
> --- a/package/tcl/tcl.mk
> +++ b/package/tcl/tcl.mk
> @@ -8,6 +8,8 @@ TCL_VERSION_MINOR = 19
> TCL_VERSION = $(TCL_VERSION_MAJOR).$(TCL_VERSION_MINOR)
> TCL_SOURCE = tcl$(TCL_VERSION)-src.tar.gz
> TCL_SITE = http://downloads.sourceforge.net/project/tcl/Tcl/$(TCL_VERSION_MAJOR).$(TCL_VERSION_MINOR)
> +TCL_LICENSE = tcl license
> +TCL_LICENSE_FILE = license.terms
> TCL_SUBDIR = unix
> TCL_CONF_OPT = \
> --disable-symbols \
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] fbv: add license info
From: Arnout Vandecappelle @ 2012-12-09 15:05 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354875156-28654-1-git-send-email-sho@relinux.de>
On 07/12/12 11:12, Stephan Hoffmann wrote:
> Signed-off-by: Stephan Hoffmann<sho@relinux.de>
> ---
> package/fbv/fbv.mk | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/package/fbv/fbv.mk b/package/fbv/fbv.mk
> index 7949e99..f697fe8 100644
> --- a/package/fbv/fbv.mk
> +++ b/package/fbv/fbv.mk
> @@ -7,6 +7,9 @@ FBV_VERSION:=1.0b
> FBV_SOURCE:=fbv-$(FBV_VERSION).tar.gz
> FBV_SITE:=http://s-tech.elsat.net.pl/fbv
>
> +FBV_LICENSE = GPLv2
Although the README and COPYING files claim it's version 2, all source files
say version 2 or later.
I'm not sure what to do here. The safe option is:
FBV_LICENSE = GPLv2 (or later?)
> +FBV_LICENSE_FILES = COPYING
That file is just referring to the GNU website, so it doesn't help much
to use that as the license file. Still, it's better than nothing I guess.
Regards,
Arnout
> +
> ### image format dependencies and configure options
> FBV_DEPENDENCIES = # empty
> FBV_CONFIGURE_OPTS = # empty
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] tslib: add license info
From: Arnout Vandecappelle @ 2012-12-09 15:10 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354876163-30452-1-git-send-email-sho@relinux.de>
On 07/12/12 11:29, Stephan Hoffmann wrote:
> Signed-off-by: Stephan Hoffmann<sho@relinux.de>
> ---
> package/tslib/tslib.mk | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/package/tslib/tslib.mk b/package/tslib/tslib.mk
> index b10b5ec..9b51015 100644
> --- a/package/tslib/tslib.mk
> +++ b/package/tslib/tslib.mk
> @@ -5,6 +5,9 @@
> #############################################################
> TSLIB_VERSION = 412d99d
> TSLIB_SITE = http://github.com/kergoth/tslib/tarball/master
> +TSLIB_LICENSE = LGPLv2
The source files don't specify a version number. The COPYING file says:
If the Library does not specify a license version number, you may
choose any version ever published by the Free Software Foundation.
In other words, it's LGPL.
Regards,
Arnout
> +TSLIB_LICENSE_FILES = COPYING
> +
> TSLIB_AUTORECONF = YES
> TSLIB_INSTALL_STAGING = YES
> TSLIB_INSTALL_STAGING_OPT = DESTDIR=$(STAGING_DIR) LDFLAGS=-L$(STAGING_DIR)/usr/lib install
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] pkg-download.mk: fix multiple matches in shallow clone test
From: Arnout Vandecappelle @ 2012-12-09 15:12 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354847827-4902-1-git-send-email-danomimanchego123@gmail.com>
On 07/12/12 03:37, Danomi Manchego wrote:
> Move the git reference directly to git-ls-remote rather than
> piping the output to grep, to help avoid reporting partial
> matches rather than the actual requested reference. Also,
> add quotes to protest "test" from failing when multiple
> strings are reported.
>
> Signed-off-by: Danomi Manchego<danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
> ---
> package/pkg-download.mk | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/package/pkg-download.mk b/package/pkg-download.mk
> index ea01b05..1705fcd 100644
> --- a/package/pkg-download.mk
> +++ b/package/pkg-download.mk
> @@ -82,7 +82,7 @@ domainseparator=$(if $(1),$(1),/)
> define DOWNLOAD_GIT
> test -e $(DL_DIR)/$($(PKG)_SOURCE) || \
> (pushd $(DL_DIR)> /dev/null&& \
> - ((test `git ls-remote $($(PKG)_SITE) | cut -f 2- | grep $($(PKG)_DL_VERSION)`&& \
> + ((test "`git ls-remote $($(PKG)_SITE) $($(PKG)_DL_VERSION)`"&& \
> echo "Doing shallow clone"&& \
> $(GIT) clone --depth 1 -b $($(PKG)_DL_VERSION) --bare $($(PKG)_SITE) $($(PKG)_BASE_NAME)) || \
> (echo "Doing full clone"&& \
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] tslib: add license info
From: Stephan Hoffmann @ 2012-12-09 15:54 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50C4A9E5.9060303@mind.be>
Am 09.12.2012 16:10, schrieb Arnout Vandecappelle:
> On 07/12/12 11:29, Stephan Hoffmann wrote:
>> Signed-off-by: Stephan Hoffmann<sho@relinux.de>
>> ---
>> package/tslib/tslib.mk | 3 +++
>> 1 files changed, 3 insertions(+), 0 deletions(-)
>>
>> diff --git a/package/tslib/tslib.mk b/package/tslib/tslib.mk
>> index b10b5ec..9b51015 100644
>> --- a/package/tslib/tslib.mk
>> +++ b/package/tslib/tslib.mk
>> @@ -5,6 +5,9 @@
>> #############################################################
>> TSLIB_VERSION = 412d99d
>> TSLIB_SITE = http://github.com/kergoth/tslib/tarball/master
>> +TSLIB_LICENSE = LGPLv2
>
> The source files don't specify a version number. The COPYING file says:
>
> If the Library does not specify a license version number, you may
> choose any version ever published by the Free Software Foundation.
>
>
> In other words, it's LGPL.
O.K., I wrote LGPLv2 because the author added the text of version 2. I
did not otice the cited text.
Regards
Stephan
>
>
> Regards,
> Arnout
>
>
>> +TSLIB_LICENSE_FILES = COPYING
>> +
>> TSLIB_AUTORECONF = YES
>> TSLIB_INSTALL_STAGING = YES
>> TSLIB_INSTALL_STAGING_OPT = DESTDIR=$(STAGING_DIR)
>> LDFLAGS=-L$(STAGING_DIR)/usr/lib install
>
--
reLinux - Stephan Hoffmann
Am Schmidtgrund 124 50765 K?ln
Tel. +49.221.95595-19 Fax: -64
www.reLinux.de sho at reLinux.de
^ permalink raw reply
* [Buildroot] [PATCH 0/51 v4] Add QEMU for runing on the target
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
Hello!
This patch series adds qemu as a package to run on the target.
Although this may sound weird in a first place, I use it to build a
simple VM server.
I also use it to build statically-linked user-emulation to run foreign
chroots on my PC (eg. running an ARM chroot on my x86_64), because
using glibc for static-linking is not possible (it still requires some
shared libs that it dlopens at runtime).
In the future, I plan on adding libvirt to remotely manage the VM server.
Changes v3 -> v4:
- drop applied cURL fix (Peter)
- fix some licenses infos (Thomas, Arnout)
- rename DTC's make goals (Arnout) [*]
- no longer autoreconf libiscsi (Thomas)
- use autotools-package infra for qemu
- drop bsd-user emulation, it does not build on Linux
- move DTC to the end of the series, in case it is still a problem.
[*] Not really using the names we discussed on the list, as Thomas said
on IRC: "do not over-engineer", or "YAGNI". When/if the make-package
infra is added, it will *then* be time to rename the variables, and
nothing can guarantee that the names we choose *now* will still be
relevant *then*.
Changes v2 -> v3:
- act on Arnout's comments on v2:
- cURL fix as a post-patch hook rather than post-install hook
- dtc package name, install tools
- usbredir cleanups
- cegui06 package name
- update to qemu 1.2.1
[PATCH 01/51] package/qemu: add license information
[PATCH 02/51] package/qemu: fix host-qemu variable names
[PATCH 03/51] package/qemu: use autotools-package infrastructure
[PATCH 04/51] package/qemu: bump version
[PATCH 05/51] package/vde2: new package
[PATCH 06/51] package/libiscsi: new package
[PATCH 07/51] package/usbredir: new package
[PATCH 08/51] package/celt051: new package
[PATCH 09/51] package/python-pyparsing: new package
[PATCH 10/51] package/spice-protocol: new package
[PATCH 11/51] package/cegui06: new package
[PATCH 12/51] package/slirp: new package
[PATCH 13/51] package/spice: new package
[PATCH 14/51] package/spice: enable client
[PATCH 15/51] package/spice: enable GUI
[PATCH 16/51] package/spice: enable slirp support
[PATCH 17/51] package/libseccomp: new package
[PATCH 18/51] package/keyutils: new package
[PATCH 19/51] package/pmake: add host pmake
[PATCH 20/51] package/libbsd: new package
[PATCH 21/51] package/libedit2: new package
[PATCH 22/51] package/ceph: new package
[PATCH 23/51] package/qemu: build for the target (i386 or x86_64 only)
[PATCH 24/51] package/qemu: add basic target selection
[PATCH 25/51] package/qemu: add fine-grained target selection
[PATCH 26/51] package/qemu: add SDL frontends
[PATCH 27/51] package/qemu: add option to enable/disable the VNC frontend
[PATCH 28/51] package/qemu: add VNC jpeg and png compression
[PATCH 29/51] package/qemu: add VNC TLS-encryption
[PATCH 30/51] package/qemu: add option to not install blobs
[PATCH 31/51] package/qemu: add option to remove unwanted keymaps
[PATCH 32/51] package/qemu: add uuid support
[PATCH 33/51] package/qemu: add support for capabilities
[PATCH 34/51] package/qemu: add attr/xattr option
[PATCH 35/51] package/qemu: add support for virtfs
[PATCH 36/51] package/qemu: add support for cURL
[PATCH 37/51] package/qemu: enable use of the curses frontend
[PATCH 38/51] package/qemu: add BlueZ connectivity
[PATCH 39/51] package/qemu: add AIO support
[PATCH 40/51] package/qemu: add support for VDE switches
[PATCH 41/51] package/qemu: add iSCSI support
[PATCH 42/51] package/qemu: add support for USB redirection
[PATCH 43/51] package/qemu: add support for Spice
[PATCH 44/51] package/qemu: enable sound
[PATCH 45/51] package/qemu: add support for libseccomp
[PATCH 46/51] package/qemu: option to build the docs
[PATCH 47/51] package/qemu: move sub-options into a sub-menu
[PATCH 48/51] package/qemu: enable a static build
[PATCH 49/51] package/dtc: new package
[PATCH 50/51] package/dtc: add option to install programs
[PATCH 51/51] package/qemu: add support for FDT
Regards,
Yann E. MORIN.
^ permalink raw reply
* [Buildroot] [PATCH 01/51] package/qemu: add license information
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
QEMU is such a snakes-nest of licenses... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
---
package/qemu/qemu.mk | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index d40d7c9..790d34f 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -7,6 +7,11 @@
QEMU_VERSION = 1.2.0
QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.bz2
QEMU_SITE = http://wiki.qemu.org/download
+QEMU_LICENSE = GPLv2 LGPLv2.1 MIT BSD-3c BSD-2c Others/BSD-1c
+QEMU_LICENSE_FILES = COPYING COPYING.LIB
+#?NOTE: there is no top-level license file for non-(L)GPL licenses;
+# the non-(L)GPL license texts are specified in the affected
+# individual source files.
QEMU_DEPENDENCIES = host-pkgconf zlib libglib2
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 02/51] package/qemu: fix host-qemu variable names
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
With the upcoming introduction of qemu-on-target, we need to properly
separate the variables used for the host qemu, from the variables
used for the target qemu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
---
package/qemu/qemu.mk | 25 ++++++++++++++-----------
1 files changed, 14 insertions(+), 11 deletions(-)
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 790d34f..81cd79f 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -13,7 +13,10 @@ QEMU_LICENSE_FILES = COPYING COPYING.LIB
# the non-(L)GPL license texts are specified in the affected
# individual source files.
-QEMU_DEPENDENCIES = host-pkgconf zlib libglib2
+#-------------------------------------------------------------
+# Host-qemu
+
+HOST_QEMU_DEPENDENCIES = host-pkgconf zlib libglib2
# BR ARCH qemu
# ------- ----
@@ -44,20 +47,20 @@ QEMU_DEPENDENCIES = host-pkgconf zlib libglib2
# sh64 not supported
# sparc sparc
-QEMU_ARCH = $(ARCH)
-ifeq ($(QEMU_ARCH),i486)
- QEMU_ARCH = i386
+HOST_QEMU_ARCH = $(ARCH)
+ifeq ($(HOST_QEMU_ARCH),i486)
+ HOST_QEMU_ARCH = i386
endif
-ifeq ($(QEMU_ARCH),i586)
- QEMU_ARCH = i386
+ifeq ($(HOST_QEMU_ARCH),i586)
+ HOST_QEMU_ARCH = i386
endif
-ifeq ($(QEMU_ARCH),i686)
- QEMU_ARCH = i386
+ifeq ($(HOST_QEMU_ARCH),i686)
+ HOST_QEMU_ARCH = i386
endif
-ifeq ($(QEMU_ARCH),powerpc)
- QEMU_ARCH = ppc
+ifeq ($(HOST_QEMU_ARCH),powerpc)
+ HOST_QEMU_ARCH = ppc
endif
-HOST_QEMU_TARGETS=$(QEMU_ARCH)-linux-user
+HOST_QEMU_TARGETS=$(HOST_QEMU_ARCH)-linux-user
define HOST_QEMU_CONFIGURE_CMDS
(cd $(@D); $(HOST_CONFIGURE_OPTS) ./configure \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 03/51] package/qemu: use autotools-package infrastructure
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Turns out that, with a little bit of tweaking, we can use
the autotools-package infrastructure to build QEMU.
That's better than defining all the _CMDS and using the
generic-package infra.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
---
package/qemu/qemu.mk | 17 ++++-------------
1 files changed, 4 insertions(+), 13 deletions(-)
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 81cd79f..6c4c6a1 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -62,6 +62,9 @@ ifeq ($(HOST_QEMU_ARCH),powerpc)
endif
HOST_QEMU_TARGETS=$(HOST_QEMU_ARCH)-linux-user
+# Note: although QEMU has a ./configure script, it is not a real autotools
+# package, and ./configure chokes on options such as --host or --target.
+# So, provide out own _CONFIGURE_CMDS to override the defaults.
define HOST_QEMU_CONFIGURE_CMDS
(cd $(@D); $(HOST_CONFIGURE_OPTS) ./configure \
--target-list="$(HOST_QEMU_TARGETS)" \
@@ -74,19 +77,7 @@ define HOST_QEMU_CONFIGURE_CMDS
)
endef
-define HOST_QEMU_BUILD_CMDS
- $(MAKE) -C $(@D) all
-endef
-
-define HOST_QEMU_INSTALL_CMDS
- $(MAKE) -C $(@D) install
-endef
-
-define HOST_QEMU_CLEAN_CMDS
- $(MAKE) -C $(@D) clean
-endef
-
-$(eval $(host-generic-package))
+$(eval $(host-autotools-package))
# variable used by other packages
QEMU_USER = $(HOST_DIR)/usr/bin/qemu-$(QEMU_ARCH)
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 04/51] package/qemu: bump version
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Bump QEMU to 1.2.1.
Note: 1.3.0 is out now, but ./configure has changed a bit, and there are
new dependencies, so the bump to 1.3.0 is postponed for a litle while...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
---
package/qemu/qemu.mk | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 6c4c6a1..2fdf2ae 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -4,7 +4,7 @@
#
#############################################################
-QEMU_VERSION = 1.2.0
+QEMU_VERSION = 1.2.1
QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.bz2
QEMU_SITE = http://wiki.qemu.org/download
QEMU_LICENSE = GPLv2 LGPLv2.1 MIT BSD-3c BSD-2c Others/BSD-1c
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 05/51] package/vde2: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
VDE is an ethernet compliant virtual network that can be
spawned over a set of physical computer over the Internet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/Config.in | 1 +
package/vde2/Config.in | 10 ++++++++++
package/vde2/vde2.mk | 36 ++++++++++++++++++++++++++++++++++++
3 files changed, 47 insertions(+), 0 deletions(-)
create mode 100644 package/vde2/Config.in
create mode 100644 package/vde2/vde2.mk
diff --git a/package/Config.in b/package/Config.in
index 74e439e..529c1ce 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -667,6 +667,7 @@ source "package/ttcp/Config.in"
source "package/udpcast/Config.in"
source "package/ulogd/Config.in"
source "package/ushare/Config.in"
+source "package/vde2/Config.in"
source "package/vpnc/Config.in"
source "package/vsftpd/Config.in"
source "package/vtun/Config.in"
diff --git a/package/vde2/Config.in b/package/vde2/Config.in
new file mode 100644
index 0000000..1591bc4
--- /dev/null
+++ b/package/vde2/Config.in
@@ -0,0 +1,10 @@
+config BR2_PACKAGE_VDE2
+ bool "vde2"
+ help
+ VDE is an ethernet compliant virtual network that can be
+ spawned over a set of physical computer over the Internet.
+ VDE is part of virtualsquare project.
+
+ http://vde.sourceforge.net/
+
+ Note: only the libraries are installed.
diff --git a/package/vde2/vde2.mk b/package/vde2/vde2.mk
new file mode 100644
index 0000000..b2e0fea
--- /dev/null
+++ b/package/vde2/vde2.mk
@@ -0,0 +1,36 @@
+#############################################################
+#
+# vde2
+#
+#############################################################
+
+VDE2_VERSION = 2.3.2
+VDE2_SOURCE = vde2-$(VDE2_VERSION).tar.bz2
+VDE2_SITE = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/project/vde/vde2/$(VDE2_VERSION)
+VDE2_LICENSE = GPLv2+ LGPLv2.1+ BSD-3c
+VDE2_LICENSE_FILES = COPYING COPYING.libvdeplug COPYING.slirpvde
+VDE2_INSTALL_STAGING = YES
+
+# Reasons for enabling/disabling stuff:
+#?- tuntap is enabled in the hope we're using a recent-enough toolchain
+# that does have if_tun.h (virtually everything these days)
+# - kvde_switch is disabled because it requires a patched kernel
+# - cryptcab is disabled to not depend on openSSL
+# - python is disabled to not depend on Python
+# - pcap is disabled to not depend on libpcap
+# - profiling is disabled because we do not want to debug/profile
+#
+# Note: disabled features can be added with corresponding dependencies
+# in future commits.
+VDE2_CONF_OPT = --disable-experimental \
+ --disable-cryptcab \
+ --disable-pcap \
+ --disable-python \
+ --disable-profile \
+ --disable-kernel-switch \
+ --enable-tuntap \
+
+#?Package does not build in parallel due to improper make rules
+VDE2_MAKE = $(MAKE1)
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 06/51] package/libiscsi: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/libiscsi/Config.in | 12 ++++++++++++
package/libiscsi/libiscsi.mk | 15 +++++++++++++++
3 files changed, 28 insertions(+), 0 deletions(-)
create mode 100644 package/libiscsi/Config.in
create mode 100644 package/libiscsi/libiscsi.mk
diff --git a/package/Config.in b/package/Config.in
index 529c1ce..b50eaf8 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -461,6 +461,7 @@ source "package/libesmtp/Config.in"
source "package/libeXosip2/Config.in"
source "package/libfcgi/Config.in"
source "package/libidn/Config.in"
+source "package/libiscsi/Config.in"
source "package/liboauth/Config.in"
source "package/libmicrohttpd/Config.in"
source "package/neon/Config.in"
diff --git a/package/libiscsi/Config.in b/package/libiscsi/Config.in
new file mode 100644
index 0000000..f3fc29e
--- /dev/null
+++ b/package/libiscsi/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_LIBISCSI
+ bool "libiscsi"
+ select BR2_PACKAGE_POPT
+ help
+ Libiscsi is a client-side library to implement the iSCSI protocol
+ that can be used to access resource of an iSCSI Target.
+
+ The library is fully async with regards to iscsi commands and scsi
+ tasks, but a sync layer is also provided for ease of use for simpler
+ applications.
+
+ https://github.com/sahlberg/libiscsi (no proper homepage)
diff --git a/package/libiscsi/libiscsi.mk b/package/libiscsi/libiscsi.mk
new file mode 100644
index 0000000..bfebd7e
--- /dev/null
+++ b/package/libiscsi/libiscsi.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# libiscsi
+#
+#############################################################
+
+LIBISCSI_VERSION = 1.6.0
+LIBISCSI_SOURCE = libiscsi-$(LIBISCSI_VERSION).tar.gz
+LIBISCSI_SITE = https://github.com/downloads/sahlberg/libiscsi
+LIBISCSI_LICENSE = GPLv2+ LGPLv2.1+
+LIBISCSI_LICENSE_FILES = COPYING LICENCE-GPL-2.txt LICENCE-LGPL-2.1.txt
+LIBISCSI_INSTALL_STAGING = YES
+LIBISCSI_DEPENDENCIES = popt
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 07/51] package/usbredir: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
package/Config.in | 1 +
package/usbredir/Config.in | 28 ++++++++++++++++++++++++++++
package/usbredir/usbredir.mk | 31 +++++++++++++++++++++++++++++++
3 files changed, 60 insertions(+), 0 deletions(-)
create mode 100644 package/usbredir/Config.in
create mode 100644 package/usbredir/usbredir.mk
diff --git a/package/Config.in b/package/Config.in
index b50eaf8..029a550 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -487,6 +487,7 @@ source "package/libupnp/Config.in"
source "package/libvncserver/Config.in"
source "package/nss-mdns/Config.in"
source "package/ortp/Config.in"
+source "package/usbredir/Config.in"
source "package/zeromq/Config.in"
endmenu
diff --git a/package/usbredir/Config.in b/package/usbredir/Config.in
new file mode 100644
index 0000000..8d8ac5a
--- /dev/null
+++ b/package/usbredir/Config.in
@@ -0,0 +1,28 @@
+comment "usbredir requires libusb"
+ depends on !BR2_PACKAGE_LIBUSB
+
+config BR2_PACKAGE_USBREDIR
+ bool "usbredir"
+ depends on BR2_PACKAGE_LIBUSB
+ help
+ usbredir is the name of a network protocol for sending usb device
+ traffic over a network connection. It is also the name of the
+ software package offering a parsing library, a usbredirhost library
+ and several utilities implementing this protocol.
+
+ Note: only the library is installed, not the utilities. Say 'y'
+ below if you want the server too.
+
+ http://www.spice-space.org/page/UsbRedir
+
+if BR2_PACKAGE_USBREDIR
+
+config BR2_PACKAGE_USBREDIR_SERVER
+ bool "usbredirserver on target"
+ help
+ If you want to serve usbredir requests on your target, say 'y'
+ here to have the usbredir server on the target.
+
+ Note: the server is not required to use the library.
+
+endif
diff --git a/package/usbredir/usbredir.mk b/package/usbredir/usbredir.mk
new file mode 100644
index 0000000..70b50c3
--- /dev/null
+++ b/package/usbredir/usbredir.mk
@@ -0,0 +1,31 @@
+#############################################################
+#
+# usbredir
+#
+#############################################################
+
+USBREDIR_VERSION = 0.4.3
+USBREDIR_SOURCE = usbredir-$(USBREDIR_VERSION).tar.bz2
+USBREDIR_SITE = http://spice-space.org/download/usbredir
+USBREDIR_LICENSE = LGPLv2.1+
+USBREDIR_LICENSE_FILES = COPYING.LIB
+USBREDIR_INSTALL_STAGING = YES
+USBREDIR_DEPENDENCIES = libusb
+
+USBREDIR_DEPENDENCIES += host-pkgconf
+
+ifeq ($(BR2_PACKAGE_USBREDIR_SERVER),y)
+
+USBREDIR_LICENSE += (for the library), GPLv2+ (for the server)
+USBREDIR_LICENSE_FILES += COPYING
+
+else # BR2_PACKAGE_USBREDIR_SERVER != y
+
+define USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+ rm -f $(TARGET_DIR)/usr/sbin/usbredirserver
+endef
+USBREDIR_POST_INSTALL_TARGET_HOOKS += USBREDIR_POST_INSTALL_TARGET_RM_SERVER
+
+endif # BR2_PACKAGE_USBREDIR_SERVER
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 08/51] package/celt051: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/multimedia/Config.in | 1 +
package/multimedia/celt051/Config.in | 15 +++++++++++++++
package/multimedia/celt051/celt.mk | 30 ++++++++++++++++++++++++++++++
3 files changed, 46 insertions(+), 0 deletions(-)
create mode 100644 package/multimedia/celt051/Config.in
create mode 100644 package/multimedia/celt051/celt.mk
diff --git a/package/multimedia/Config.in b/package/multimedia/Config.in
index 273d9bc..5e8d60c 100644
--- a/package/multimedia/Config.in
+++ b/package/multimedia/Config.in
@@ -2,6 +2,7 @@ menu "Audio and video applications"
source "package/multimedia/alsa-utils/Config.in"
source "package/multimedia/aumix/Config.in"
source "package/multimedia/bellagio/Config.in"
+source "package/multimedia/celt051/Config.in"
source "package/multimedia/faad2/Config.in"
source "package/multimedia/flac/Config.in"
source "package/multimedia/ffmpeg/Config.in"
diff --git a/package/multimedia/celt051/Config.in b/package/multimedia/celt051/Config.in
new file mode 100644
index 0000000..50ed069
--- /dev/null
+++ b/package/multimedia/celt051/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_CELT051
+ bool "celt051"
+ select BR2_PACKAGE_LIBOGG
+ help
+ The CELT ultra-low delay audio codec
+
+ The CELT codec is a compression algorithm for audio. Like MP3,
+ Vorbis, and AAC it is suitable for transmitting music with high
+ quality. Unlike these formats CELT imposes very little delay on
+ the signal, even less than is typical for speech centric formats
+ like Speex, GSM, or G.729.
+
+ Note: this is version 0.5.1.3 of celt.
+
+ http://www.celt-codec.org/
diff --git a/package/multimedia/celt051/celt.mk b/package/multimedia/celt051/celt.mk
new file mode 100644
index 0000000..9baaa82
--- /dev/null
+++ b/package/multimedia/celt051/celt.mk
@@ -0,0 +1,30 @@
+#############################################################
+#
+# celt051
+#
+#############################################################
+
+# Although version newer than 0.5.1.3 exists, we're
+# stuck with 0.5.1.3 for use by Spice (coming later)
+CELT051_VERSION = 0.5.1.3
+CELT051_SOURCE = celt-$(CELT051_VERSION).tar.gz
+CELT051_SITE = http://downloads.xiph.org/releases/celt
+CELT051_LICENSE = BSD-2c
+CELT051_LICENSE_FILES = COPYING
+CELT051_INSTALL_STAGING = YES
+CELT051_DEPENDENCIES = libogg
+
+# Need to specify --with-ogg, otherwise /usr/lib may be searched for
+# if target is the same kind as host (ie. same arch, same bitness,
+# same endianness, so that /usr/lib contains libraries linkable by
+# our cross-compiler)
+CELT051_CONF_OPT = \
+ --enable-fixed-point \
+ --disable-fixed-point-debug \
+ --disable-experimental-postfilter \
+ --disable-static-modes \
+ --disable-assertions \
+ --disable-oggtest \
+ --with-ogg=$(STAGING_DIR)/usr \
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 09/51] package/python-pyparsing: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Config.in | 1 +
package/python-pyparsing/Config.in | 11 +++++++
package/python-pyparsing/python-pyparsing.mk | 38 ++++++++++++++++++++++++++
3 files changed, 50 insertions(+), 0 deletions(-)
create mode 100644 package/python-pyparsing/Config.in
create mode 100644 package/python-pyparsing/python-pyparsing.mk
diff --git a/package/Config.in b/package/Config.in
index 029a550..ffe0b8f 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -307,6 +307,7 @@ source "package/python-netifaces/Config.in"
source "package/python-nfc/Config.in"
source "package/python-protobuf/Config.in"
source "package/python-pygame/Config.in"
+source "package/python-pyparsing/Config.in"
source "package/python-serial/Config.in"
source "package/python-setuptools/Config.in"
endmenu
diff --git a/package/python-pyparsing/Config.in b/package/python-pyparsing/Config.in
new file mode 100644
index 0000000..126dd0e
--- /dev/null
+++ b/package/python-pyparsing/Config.in
@@ -0,0 +1,11 @@
+config BR2_PACKAGE_PYTHON_PYPARSING
+ bool "pyparsing"
+ depends on BR2_PACKAGE_PYTHON
+ help
+ The pyparsing module is an alternative approach to creating and
+ executing simple grammars, vs. the traditional lex/yacc approach,
+ or the use of regular expressions. The pyparsing module provides
+ a library of classes that client code uses to construct the grammar
+ directly in Python code.
+
+ http://pyparsing.wikispaces.com/
diff --git a/package/python-pyparsing/python-pyparsing.mk b/package/python-pyparsing/python-pyparsing.mk
new file mode 100644
index 0000000..621f636
--- /dev/null
+++ b/package/python-pyparsing/python-pyparsing.mk
@@ -0,0 +1,38 @@
+#############################################################
+#
+# python-pyparsing
+#
+#############################################################
+
+PYTHON_PYPARSING_VERSION = 1.5.6
+PYTHON_PYPARSING_SOURCE = pyparsing-$(PYTHON_PYPARSING_VERSION).tar.gz
+PYTHON_PYPARSING_SITE = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/project/pyparsing/pyparsing/pyparsing-$(PYTHON_PYPARSING_VERSION)
+PYTHON_PYPARSING_LICENSE = MIT
+PYTHON_PYPARSING_LICENSE_FILES = LICENSE
+PYTHON_PYPARSING_INSTALL_STAGING = YES
+PYTHON_PYPARSING_DEPENDENCIES = python
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_BUILD_CMDS
+ (cd $(@D); \
+ CC="$(TARGET_CC)" \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ LDSHARED="$(TARGET_CROSS)gcc -shared" \
+ CROSS_COMPILING=yes \
+ _python_sysroot=$(STAGING_DIR) \
+ _python_srcdir=$(BUILD_DIR)/python$(PYTHON_VERSION) \
+ _python_prefix=/usr \
+ _python_exec_prefix=/usr \
+ $(HOST_DIR)/usr/bin/python setup.py build \
+ )
+endef
+
+# Shamelessly vampirised from python-pygame ;-)
+define PYTHON_PYPARSING_INSTALL_TARGET_CMDS
+ (cd $(@D); \
+ $(HOST_DIR)/usr/bin/python setup.py install \
+ --prefix=$(TARGET_DIR)/usr \
+ )
+endef
+
+$(eval $(generic-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 10/51] package/spice-protocol: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
---
package/Config.in | 1 +
package/spice-protocol/Config.in | 12 ++++++++++++
package/spice-protocol/spice-protocol.mk | 14 ++++++++++++++
3 files changed, 27 insertions(+), 0 deletions(-)
create mode 100644 package/spice-protocol/Config.in
create mode 100644 package/spice-protocol/spice-protocol.mk
diff --git a/package/Config.in b/package/Config.in
index ffe0b8f..a19c265 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -655,6 +655,7 @@ source "package/ser2net/Config.in"
source "package/socat/Config.in"
source "package/socketcand/Config.in"
source "package/spawn-fcgi/Config.in"
+source "package/spice-protocol/Config.in"
source "package/squid/Config.in"
source "package/stunnel/Config.in"
source "package/tcpdump/Config.in"
diff --git a/package/spice-protocol/Config.in b/package/spice-protocol/Config.in
new file mode 100644
index 0000000..b354361
--- /dev/null
+++ b/package/spice-protocol/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_SPICE_PROTOCOL
+ bool "spice protocol"
+ help
+ The Spice project aims to provide a complete open source
+ solution for interaction with virtualized desktop devices.
+ The Spice project deals with both the virtualized devices
+ and the front-end. Interaction between front-end and
+ back-end is done using VD-Interfaces.
+
+ This package implements the protocol-part of Spice.
+
+ http://www.spice-space.org/
diff --git a/package/spice-protocol/spice-protocol.mk b/package/spice-protocol/spice-protocol.mk
new file mode 100644
index 0000000..dcfe50d
--- /dev/null
+++ b/package/spice-protocol/spice-protocol.mk
@@ -0,0 +1,14 @@
+#############################################################
+#
+# Spice-protocol
+#
+#############################################################
+
+SPICE_PROTOCOL_VERSION = 0.12.2
+SPICE_PROTOCOL_SOURCE = spice-protocol-$(SPICE_PROTOCOL_VERSION).tar.bz2
+SPICE_PROTOCOL_SITE = http://www.spice-space.org/download/releases/
+SPICE_PROTOCOL_LICENSE = BSD-3c
+SPICE_PROTOCOL_LICENSE_FILES = COPYING
+SPICE_PROTOCOL_INSTALL_STAGING = YES
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 11/51] package/cegui06: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Although there are more reent versions of CEGUI, we are stuck
with 0.6.2b for use by spice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
package/Config.in | 1 +
package/cegui06/Config.in | 15 +++++++++++++
package/cegui06/cegui06-stddef.h.patch | 26 +++++++++++++++++++++++
package/cegui06/cegui06.mk | 36 ++++++++++++++++++++++++++++++++
4 files changed, 78 insertions(+), 0 deletions(-)
create mode 100644 package/cegui06/Config.in
create mode 100644 package/cegui06/cegui06-stddef.h.patch
create mode 100644 package/cegui06/cegui06.mk
diff --git a/package/Config.in b/package/Config.in
index a19c265..6fda15b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -109,6 +109,7 @@ comment "Graphic applications"
source "package/rrdtool/Config.in"
comment "graphic libraries"
+source "package/cegui06/Config.in"
source "package/directfb/Config.in"
source "package/directfb-examples/Config.in"
source "package/divine/Config.in"
diff --git a/package/cegui06/Config.in b/package/cegui06/Config.in
new file mode 100644
index 0000000..3b77e9f
--- /dev/null
+++ b/package/cegui06/Config.in
@@ -0,0 +1,15 @@
+config BR2_PACKAGE_CEGUI06
+ bool "cegui06"
+ depends on BR2_TOOLCHAIN_HAS_THREADS
+ select BR2_PACKAGE_FREETYPE
+ select BR2_PACKAGE_PCRE
+ select BR2_PACKAGE_EXPAT
+ help
+ Crazy Eddie's GUI System is a free library providing windowing and
+ widgets for graphics APIs / engines where such functionality is not
+ natively available, or severely lacking. The library is object
+ orientated, written in C++, and targeted at games developers who
+ should be spending their time creating great games, not building
+ GUI sub-systems!
+
+ http://www.cegui.org.uk/
diff --git a/package/cegui06/cegui06-stddef.h.patch b/package/cegui06/cegui06-stddef.h.patch
new file mode 100644
index 0000000..cc16eff
--- /dev/null
+++ b/package/cegui06/cegui06-stddef.h.patch
@@ -0,0 +1,26 @@
+includes: ptrdiff_t is defined in stddef.h
+
+ptrdiff_t is defined in the stddef.h header, so this
+header must be included.
+
+Do the #include in a common header to avoid doing it
+all over the place.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream, it's a no-longer-maintained branch.
+To be noted, however, is that the current devel branch is
+still missing that include.
+
+diff -durN cegui06-0.6.2.orig/include/CEGUIBase.h cegui06-0.6.2/include/CEGUIBase.h
+--- cegui06-0.6.2.orig//include/CEGUIBase.h 2008-02-11 15:38:27.000000000 +0100
++++ cegui06-0.6.2/include/CEGUIBase.h 2012-08-19 22:51:50.260385978 +0200
+@@ -34,6 +34,7 @@
+ #define _CEGUIBase_h_
+
+ #include <cassert>
++#include <stddef.h>
+
+ // bring in configuration options
+ #include "CEGUIConfig.h"
diff --git a/package/cegui06/cegui06.mk b/package/cegui06/cegui06.mk
new file mode 100644
index 0000000..c32c15b
--- /dev/null
+++ b/package/cegui06/cegui06.mk
@@ -0,0 +1,36 @@
+#############################################################
+#
+# libcegui
+#
+#############################################################
+
+# Do not update the version, we need exactly that one for Spice.
+CEGUI06_VERSION_MAJOR = 0.6.2
+CEGUI06_VERSION = $(CEGUI06_VERSION_MAJOR)b
+CEGUI06_SOURCE = CEGUI-$(CEGUI06_VERSION).tar.gz
+CEGUI06_SITE = http://downloads.sourceforge.net/project/crayzedsgui/CEGUI%20Mk-2/$(CEGUI06_VERSION_MAJOR)
+CEGUI06_LICENSE = MIT
+CEGUI06_LICENSE_FILES = COPYING
+CEGUI06_INSTALL_STAGING = YES
+
+CEGUI06_DEPENDENCIES = \
+ freetype \
+ pcre \
+ expat \
+
+CEGUI06_CONF_OPT = \
+ --enable-expat \
+ --disable-external-tinyxml \
+ --disable-xerces-c \
+ --disable-libxml \
+ --disable-tinyxml \
+ --disable-opengl-renderer \
+ --disable-external-glew \
+ --disable-irrlicht-renderer \
+ --disable-directfb-renderer \
+ --disable-samples \
+ --disable-lua-module \
+ --disable-toluacegui \
+ --disable-external-toluapp \
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 12/51] package/slirp: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/Config.in | 1 +
package/slirp/Config.in | 25 +++++++++++++++++++++++++
package/slirp/slirp.mk | 15 +++++++++++++++
3 files changed, 41 insertions(+), 0 deletions(-)
create mode 100644 package/slirp/Config.in
create mode 100644 package/slirp/slirp.mk
diff --git a/package/Config.in b/package/Config.in
index 6fda15b..8651fb7 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -489,6 +489,7 @@ source "package/libupnp/Config.in"
source "package/libvncserver/Config.in"
source "package/nss-mdns/Config.in"
source "package/ortp/Config.in"
+source "package/slirp/Config.in"
source "package/usbredir/Config.in"
source "package/zeromq/Config.in"
endmenu
diff --git a/package/slirp/Config.in b/package/slirp/Config.in
new file mode 100644
index 0000000..dedded3
--- /dev/null
+++ b/package/slirp/Config.in
@@ -0,0 +1,25 @@
+config BR2_PACKAGE_SLIRP
+ bool "slirp"
+ help
+ The Spice project aims to provide a complete open source
+ solution for interaction with virtualized desktop devices.
+ The Spice project deals with both the virtualized devices
+ and the front-end. Interaction between front-end and
+ back-end is done using VD-Interfaces.
+
+ This package implements the slirp-part for Spice.
+ Slirp emulates a PPP or SLIP connection over a normal terminal.
+
+ http://www.spice-space.org/
+
+ NOTE:
+ This package has some history of a unique kind:
+ - originally developped as 'slirp' by Danny Gasparovski, and
+ seemingly abandonned (developper /disapeared/)
+ - then re-maintained at sourceforge by "Kelly", up to some
+ time around 2009: http://slirp.sourceforge.net/
+ - during that period, QEMU (Fabrice BELLARD) forked the code
+ and included it in QEMU
+ - and it was imported from this breed by the Spice project
+ around May 2009
+ - which is what we use here
diff --git a/package/slirp/slirp.mk b/package/slirp/slirp.mk
new file mode 100644
index 0000000..04a4736
--- /dev/null
+++ b/package/slirp/slirp.mk
@@ -0,0 +1,15 @@
+#############################################################
+#
+# Spice-slirp
+#
+#############################################################
+
+SLIRP_VERSION = 8c2da74c1385242f20799fec8c04f8378edc6550
+SLIRP_SITE = git://anongit.freedesktop.org/spice/slirp
+SLIRP_LICENSE = BSD-4c BSD-2c
+# Note: The license file 'COPYRIGHT' is missing from the sources,
+# although some files refer to it.
+SLIRP_INSTALL_STAGING = YES
+SLIRP_AUTORECONF = YES
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 13/51] package/spice: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/Config.in | 1 +
package/spice/Config.in | 23 +++++++++++++++++
package/spice/spice.mk | 62 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 86 insertions(+), 0 deletions(-)
create mode 100644 package/spice/Config.in
create mode 100644 package/spice/spice.mk
diff --git a/package/Config.in b/package/Config.in
index 8651fb7..02f65fb 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -658,6 +658,7 @@ source "package/socat/Config.in"
source "package/socketcand/Config.in"
source "package/spawn-fcgi/Config.in"
source "package/spice-protocol/Config.in"
+source "package/spice/Config.in"
source "package/squid/Config.in"
source "package/stunnel/Config.in"
source "package/tcpdump/Config.in"
diff --git a/package/spice/Config.in b/package/spice/Config.in
new file mode 100644
index 0000000..ced3ec7
--- /dev/null
+++ b/package/spice/Config.in
@@ -0,0 +1,23 @@
+comment "spice server depends on python"
+ depends on !BR2_PACKAGE_PYTHON
+
+config BR2_PACKAGE_SPICE
+ bool "spice server"
+ depends on BR2_PACKAGE_PYTHON
+ select BR2_PACKAGE_PYTHON_PYPARSING
+ select BR2_PACKAGE_SPICE_PROTOCOL
+ select BR2_PACKAGE_PIXMAN
+ select BR2_PACKAGE_CELT051
+ select BR2_PACKAGE_ALSA_LIB
+ select BR2_PACKAGE_OPENSSL
+ select BR2_PACKAGE_JPEG
+ help
+ The Spice project aims to provide a complete open source
+ solution for interaction with virtualized desktop devices.
+ The Spice project deals with both the virtualized devices
+ and the front-end. Interaction between front-end and
+ back-end is done using VD-Interfaces.
+
+ This package implements the server-part of Spice.
+
+ http://www.spice-space.org/
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
new file mode 100644
index 0000000..dbd2d5f
--- /dev/null
+++ b/package/spice/spice.mk
@@ -0,0 +1,62 @@
+#############################################################
+#
+# Spice
+#
+#############################################################
+
+SPICE_VERSION = 0.12.0
+SPICE_SOURCE = spice-$(SPICE_VERSION).tar.bz2
+SPICE_SITE = http://www.spice-space.org/download/releases/
+SPICE_LICENSE = LGPLv2.1+
+SPICE_LICENSE_FILES = COPYING
+SPICE_INSTALL_STAGING = YES
+SPICE_DEPENDENCIES = \
+ spice-protocol \
+ pixman \
+ celt051 \
+ python-pyparsing \
+ alsa-lib \
+ openssl \
+ jpeg \
+
+# We disable everything for now, because the dependency tree can become
+# quite deep if we try to enable some features, and I have not tested that.
+SPICE_CONF_OPT = \
+ --disable-tunnel \
+ --disable-gui \
+ --disable-opengl \
+ --disable-smartcard \
+ --disable-client \
+ --disable-automated-tests \
+ --without-sasl \
+
+SPICE_DEPENDENCIES += host-pkgconf
+
+SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
+SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
+
+# We need to tweak spice.pc because it /forgets/ (for static linking) that
+# it should link against libz and libjpeg. libz is pkg-config-aware, while
+# libjpeg isn't, hence the two-line tweak
+define SPICE_POST_INSTALL_STAGING_FIX_PC
+ $(SED) 's/^\(Requires.private:.*\)$$/\1 zlib/; s/^\(Libs.private:.*\)$$/\1 -ljpeg/;' \
+ "$(STAGING_DIR)/usr/lib/pkgconfig/spice-server.pc"
+endef
+SPICE_POST_INSTALL_STAGING_HOOKS += SPICE_POST_INSTALL_STAGING_FIX_PC
+
+# It is currently not possible to detect if stack-protection is available
+# or not, because it requires support from both the compiler *and* the
+# C library, but the C library (eg. uClibc) can be compiled without that
+# support, even if gcc accepts the -fstack-protector-all option.
+# spice's ./configure only checks for gcc's -fstack-protector-all option,
+# so it misses the case where the C library doe not provide the requires
+# support.
+# A correct fix would be to fix spice's ./configure to also check the C
+# library, but it might be much more involved.
+# So, we simply disable it for now. After all, as uClibc's help puts it:
+# Note that NOEXECSTACK on a kernel with address space randomization
+# is generally sufficient to prevent most buffer overflow exploits
+# without increasing code size.
+SPICE_CONF_OPT += gl_cv_warn__fstack_protector_all=no
+
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 14/51] package/spice: enable client
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/spice/Config.in | 12 ++++++++++++
package/spice/spice.mk | 8 +++++++-
2 files changed, 19 insertions(+), 1 deletions(-)
diff --git a/package/spice/Config.in b/package/spice/Config.in
index ced3ec7..e906acf 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -21,3 +21,15 @@ config BR2_PACKAGE_SPICE
This package implements the server-part of Spice.
http://www.spice-space.org/
+
+if BR2_PACKAGE_SPICE
+
+comment "client depends on X.org"
+ depends on !BR2_PACKAGE_XORG7
+
+config BR2_PACKAGE_SPICE_CLIENT
+ bool "Enable client"
+ depends on BR2_PACKAGE_XORG7
+ select BR2_PACKAGE_XLIB_LIBXRANDR
+
+endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index dbd2d5f..2f9dcbd 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -26,12 +26,18 @@ SPICE_CONF_OPT = \
--disable-gui \
--disable-opengl \
--disable-smartcard \
- --disable-client \
--disable-automated-tests \
--without-sasl \
SPICE_DEPENDENCIES += host-pkgconf
+ifeq ($(BR2_PACKAGE_SPICE_CLIENT),y)
+SPICE_CONF_OPT += --enable-client
+SPICE_DEPENDENCIES += xlib_libXrandr xlib_libXfixes
+else
+SPICE_CONF_OPT += --disable-client
+endif
+
SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 15/51] package/spice: enable GUI
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/spice/Config.in | 8 ++++++++
package/spice/spice.mk | 8 +++++++-
2 files changed, 15 insertions(+), 1 deletions(-)
diff --git a/package/spice/Config.in b/package/spice/Config.in
index e906acf..6e6233d 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -32,4 +32,12 @@ config BR2_PACKAGE_SPICE_CLIENT
depends on BR2_PACKAGE_XORG7
select BR2_PACKAGE_XLIB_LIBXRANDR
+config BR2_PACKAGE_SPICE_GUI
+ bool "Enable GUI"
+ depends on BR2_PACKAGE_SPICE_CLIENT
+ select BR2_PACKAGE_CEGUI06
+ help
+ Say 'y' here to enable the Graphical User Interface (GUI)
+ start dialog.
+
endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index 2f9dcbd..350c4a9 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -23,7 +23,6 @@ SPICE_DEPENDENCIES = \
# quite deep if we try to enable some features, and I have not tested that.
SPICE_CONF_OPT = \
--disable-tunnel \
- --disable-gui \
--disable-opengl \
--disable-smartcard \
--disable-automated-tests \
@@ -38,6 +37,13 @@ else
SPICE_CONF_OPT += --disable-client
endif
+ifeq ($(BR2_PACKAGE_SPICE_GUI),y)
+SPICE_CONF_OPT += --enable-gui
+SPICE_DEPENDENCIES += cegui06
+else
+SPICE_CONF_OPT += --disable-gui
+endif
+
SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 16/51] package/spice: enable slirp support
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/spice/Config.in | 7 +++++++
package/spice/spice.mk | 8 +++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/package/spice/Config.in b/package/spice/Config.in
index 6e6233d..846bee1 100644
--- a/package/spice/Config.in
+++ b/package/spice/Config.in
@@ -40,4 +40,11 @@ config BR2_PACKAGE_SPICE_GUI
Say 'y' here to enable the Graphical User Interface (GUI)
start dialog.
+config BR2_PACKAGE_SPICE_TUNNEL
+ bool "Enable network redirection"
+ select BR2_PACKAGE_SLIRP
+ help
+ Say 'y' here to enable network redirection, aka tunnelling
+ through a SLIP/SLIRP session.
+
endif # BR2_PACKAGE_SPICE
diff --git a/package/spice/spice.mk b/package/spice/spice.mk
index 350c4a9..80fbf22 100644
--- a/package/spice/spice.mk
+++ b/package/spice/spice.mk
@@ -22,7 +22,6 @@ SPICE_DEPENDENCIES = \
# We disable everything for now, because the dependency tree can become
# quite deep if we try to enable some features, and I have not tested that.
SPICE_CONF_OPT = \
- --disable-tunnel \
--disable-opengl \
--disable-smartcard \
--disable-automated-tests \
@@ -44,6 +43,13 @@ else
SPICE_CONF_OPT += --disable-gui
endif
+ifeq ($(BR2_PACKAGE_SPICE_TUNNEL),y)
+SPICE_CONF_OPT += --enable-tunnel
+SPICE_DEPENDENCIES += slirp
+else
+SPICE_CONF_OPT += --disable-tunnel
+endif
+
SPICE_CONF_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
SPICE_MAKE_ENV = PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 17/51] package/libseccomp: new package
From: Yann E. MORIN @ 2012-12-09 16:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355070924-8009-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/Config.in | 1 +
package/libseccomp/Config.in | 13 +++++++++++
| 17 +++++++++++++++
package/libseccomp/libseccomp.mk | 22 ++++++++++++++++++++
4 files changed, 53 insertions(+), 0 deletions(-)
create mode 100644 package/libseccomp/Config.in
create mode 100644 package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
create mode 100644 package/libseccomp/libseccomp.mk
diff --git a/package/Config.in b/package/Config.in
index 02f65fb..79bff6f 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -516,6 +516,7 @@ source "package/libical/Config.in"
source "package/libnspr/Config.in"
source "package/libsigc/Config.in"
source "package/libtpl/Config.in"
+source "package/libseccomp/Config.in"
source "package/liburcu/Config.in"
source "package/linux-pam/Config.in"
source "package/lttng-libust/Config.in"
diff --git a/package/libseccomp/Config.in b/package/libseccomp/Config.in
new file mode 100644
index 0000000..183cf4e
--- /dev/null
+++ b/package/libseccomp/Config.in
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_LIBSECCOMP
+ bool "libseccomp"
+ help
+ High level interface to the Linux Kernel's seccomp filter
+
+ The libseccomp library provides and easy to use, platform independent,
+ interface to the Linux Kernel's syscall filtering mechanism: seccomp.
+ The libseccomp API is designed to abstract away the underlying BPF
+ based syscall filter language and present a more conventional
+ function-call based filtering interface that should be familiar to,
+ and easily adopted by application developers.
+
+ http://sourceforge.net/projects/libseccomp/
--git a/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch b/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
new file mode 100644
index 0000000..0997edd
--- /dev/null
+++ b/package/libseccomp/libseccomp-use-system-headers-from-sysroot.patch
@@ -0,0 +1,17 @@
+configure: check headers in sysroot, not in host's system headers
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+diff -durN libseccomp-1.0.0.orig/configure libseccomp-1.0.0/configure
+--- libseccomp-1.0.0.orig/configure 2012-07-27 22:35:05.000000000 +0200
++++ libseccomp-1.0.0/configure 2012-10-27 00:12:50.739196219 +0200
+@@ -205,7 +205,8 @@
+ #
+
+ # system seccomp includes
+-if [[ -r "/usr/include/linux/seccomp.h" ]]; then
++# ${SYSROOT} added by buildroot for cross-compilation
++if [[ -r "${SYSROOT}/usr/include/linux/seccomp.h" ]]; then
+ opt_sysinc_seccomp="yes"
+ else
+ opt_sysinc_seccomp="no"
diff --git a/package/libseccomp/libseccomp.mk b/package/libseccomp/libseccomp.mk
new file mode 100644
index 0000000..73fe632
--- /dev/null
+++ b/package/libseccomp/libseccomp.mk
@@ -0,0 +1,22 @@
+#############################################################
+#
+# libseccomp
+#
+#############################################################
+
+LIBSECCOMP_VERSION = 1.0.0
+LIBSECCOMP_SOURCE = libseccomp-$(LIBSECCOMP_VERSION).tar.gz
+LIBSECCOMP_SITE = http://downloads.sourceforge.net/project/libseccomp
+LIBSECCOMP_LICENSE = LGPLv2.1
+LIBSECCOMP_LICENSE_FILES = LICENSE
+LIBSECCOMP_INSTALL_STAGING = YES
+
+# Needed for configure to find our system headers:
+LIBSECCOMP_CONF_ENV = SYSROOT=$(STAGING_DIR)
+LIBSECCOMP_MAKE_ENV = $(TARGET_CONFIGURE_OPTS)
+LIBSECCOMP_MAKE_OPT = SUBDIRS_BUILD=src
+LIBSECCOMP_INSTALL_STAGING_OPT = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(STAGING_DIR) install
+LIBSECCOMP_INSTALL_TARGET_OPT = SUBDIRS_BUILD=src SUBDIRS_INSTALL="src include" DESTDIR=$(TARGET_DIR) install
+
+# Not a real autotools package, but works quite OK nonetheless
+$(eval $(autotools-package))
--
1.7.2.5
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox