From: Josh Durgin <josh.durgin@inktank.com>
To: Alex Elder <elder@inktank.com>
Cc: "ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>
Subject: Re: [PATCH, v2] rbd: encapsulate handling for a single request
Date: Thu, 17 Jan 2013 13:30:59 -0800 [thread overview]
Message-ID: <50F86D93.40107@inktank.com> (raw)
In-Reply-To: <50F8674B.7010109@inktank.com>
On 01/17/2013 01:04 PM, Alex Elder wrote:
> In rbd_rq_fn(), requests are fetched from the block layer and each
> request is processed, looping through the request's list of bio's
> until they've all been consumed.
>
> Separate the handling for a single request into its own function to
> make it a bit easier to see what's going on.
>
> Signed-off-by: Alex Elder <elder@inktank.com>
> ---
> v2: Changed to handle 0-length requests the same as before.
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
> drivers/block/rbd.c | 119
> +++++++++++++++++++++++++++------------------------
> 1 file changed, 63 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
> index 8d93b6a..738d1e4 100644
> --- a/drivers/block/rbd.c
> +++ b/drivers/block/rbd.c
> @@ -1583,6 +1583,64 @@ static struct rbd_req_coll *rbd_alloc_coll(int
> num_reqs)
> return coll;
> }
>
> +static int rbd_dev_do_request(struct request *rq,
> + struct rbd_device *rbd_dev,
> + struct ceph_snap_context *snapc,
> + u64 ofs, unsigned int size,
> + struct bio *bio_chain)
> +{
> + int num_segs;
> + struct rbd_req_coll *coll;
> + unsigned int bio_offset;
> + int cur_seg = 0;
> +
> + dout("%s 0x%x bytes at 0x%llx\n",
> + rq_data_dir(rq) == WRITE ? "write" : "read",
> + size, (unsigned long long) blk_rq_pos(rq) * SECTOR_SIZE);
> +
> + num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
> + if (num_segs <= 0)
> + return num_segs;
> +
> + coll = rbd_alloc_coll(num_segs);
> + if (!coll)
> + return -ENOMEM;
> +
> + bio_offset = 0;
> + do {
> + u64 limit = rbd_segment_length(rbd_dev, ofs, size);
> + unsigned int clone_size;
> + struct bio *bio_clone;
> +
> + BUG_ON(limit > (u64)UINT_MAX);
> + clone_size = (unsigned int)limit;
> + dout("bio_chain->bi_vcnt=%hu\n", bio_chain->bi_vcnt);
> +
> + kref_get(&coll->kref);
> +
> + /* Pass a cloned bio chain via an osd request */
> +
> + bio_clone = bio_chain_clone_range(&bio_chain,
> + &bio_offset, clone_size,
> + GFP_ATOMIC);
> + if (bio_clone)
> + (void)rbd_do_op(rq, rbd_dev, snapc,
> + ofs, clone_size,
> + bio_clone, coll, cur_seg);
> + else
> + rbd_coll_end_req_index(rq, coll, cur_seg,
> + (s32)-ENOMEM,
> + clone_size);
> + size -= clone_size;
> + ofs += clone_size;
> +
> + cur_seg++;
> + } while (size > 0);
> + kref_put(&coll->kref, rbd_coll_release);
> +
> + return 0;
> +}
> +
> /*
> * block device queue callback
> */
> @@ -1596,10 +1654,8 @@ static void rbd_rq_fn(struct request_queue *q)
> bool do_write;
> unsigned int size;
> u64 ofs;
> - int num_segs, cur_seg = 0;
> - struct rbd_req_coll *coll;
> struct ceph_snap_context *snapc;
> - unsigned int bio_offset;
> + int result;
>
> dout("fetched request\n");
>
> @@ -1637,60 +1693,11 @@ static void rbd_rq_fn(struct request_queue *q)
> ofs = blk_rq_pos(rq) * SECTOR_SIZE;
> bio = rq->bio;
>
> - dout("%s 0x%x bytes at 0x%llx\n",
> - do_write ? "write" : "read",
> - size, (unsigned long long) blk_rq_pos(rq) * SECTOR_SIZE);
> -
> - num_segs = rbd_get_num_segments(&rbd_dev->header, ofs, size);
> - if (num_segs <= 0) {
> - spin_lock_irq(q->queue_lock);
> - __blk_end_request_all(rq, num_segs);
> - ceph_put_snap_context(snapc);
> - continue;
> - }
> - coll = rbd_alloc_coll(num_segs);
> - if (!coll) {
> - spin_lock_irq(q->queue_lock);
> - __blk_end_request_all(rq, -ENOMEM);
> - ceph_put_snap_context(snapc);
> - continue;
> - }
> -
> - bio_offset = 0;
> - do {
> - u64 limit = rbd_segment_length(rbd_dev, ofs, size);
> - unsigned int chain_size;
> - struct bio *bio_chain;
> -
> - BUG_ON(limit > (u64) UINT_MAX);
> - chain_size = (unsigned int) limit;
> - dout("rq->bio->bi_vcnt=%hu\n", rq->bio->bi_vcnt);
> -
> - kref_get(&coll->kref);
> -
> - /* Pass a cloned bio chain via an osd request */
> -
> - bio_chain = bio_chain_clone_range(&bio,
> - &bio_offset, chain_size,
> - GFP_ATOMIC);
> - if (bio_chain)
> - (void) rbd_do_op(rq, rbd_dev, snapc,
> - ofs, chain_size,
> - bio_chain, coll, cur_seg);
> - else
> - rbd_coll_end_req_index(rq, coll, cur_seg,
> - (s32)-ENOMEM,
> - chain_size);
> - size -= chain_size;
> - ofs += chain_size;
> -
> - cur_seg++;
> - } while (size > 0);
> - kref_put(&coll->kref, rbd_coll_release);
> -
> - spin_lock_irq(q->queue_lock);
> -
> + result = rbd_dev_do_request(rq, rbd_dev, snapc, ofs, size, bio);
> ceph_put_snap_context(snapc);
> + spin_lock_irq(q->queue_lock);
> + if (!size || result < 0)
> + __blk_end_request_all(rq, result);
> }
> }
>
next prev parent reply other threads:[~2013-01-17 21:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-03 22:42 [PATCH REPOST 0/2] rbd: simplify rbd_rq_fn() Alex Elder
2013-01-03 22:43 ` [PATCH REPOST 1/2] rbd: encapsulate handling for a single request Alex Elder
2013-01-15 23:45 ` Josh Durgin
2013-01-17 21:01 ` Alex Elder
2013-01-17 21:04 ` [PATCH, v2] " Alex Elder
2013-01-17 21:30 ` Josh Durgin [this message]
2013-01-03 22:43 ` [PATCH REPOST 2/2] rbd: a little more cleanup of rbd_rq_fn() Alex Elder
2013-01-16 0:02 ` Josh Durgin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50F86D93.40107@inktank.com \
--to=josh.durgin@inktank.com \
--cc=ceph-devel@vger.kernel.org \
--cc=elder@inktank.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox