From: Stefan Priebe <s.priebe@profihost.ag>
To: Mark Nelson <mnelson@redhat.com>,
"ceph-devel@vger.kernel.org" <ceph-devel@vger.kernel.org>
Subject: Re: speed decrease since firefly,giant,hammer the 2nd try
Date: Wed, 11 Feb 2015 06:42:21 +0100 [thread overview]
Message-ID: <54DAEBBD.30409@profihost.ag> (raw)
In-Reply-To: <54DADE52.2010604@redhat.com>
Am 11.02.2015 um 05:45 schrieb Mark Nelson:
> On 02/10/2015 04:18 PM, Stefan Priebe wrote:
>>
>> Am 10.02.2015 um 22:38 schrieb Mark Nelson:
>>> On 02/10/2015 03:11 PM, Stefan Priebe wrote:
>>>>
>>>> mhm i installed librbd1-dbg and librados2-dbg - but the output still
>>>> looks useless to me. Should i upload it somewhere?
>>>
>>> Meh, if it's all just symbols it's probably not that helpful.
>>>
>>> I've summarized your results here:
>>>
>>> 1 concurrent 4k write (libaio, direct=1, iodepth=1)
>>>
>>> IOPS Latency
>>> wb on wb off wb on wb off
>>> dumpling 10870 536 ~100us ~2ms
>>> firefly 10350 525 ~100us ~2ms
>>>
>>> So in single op tests dumpling and firefly are far closer. Now let's
>>> see each of these cases with iodepth=32 (still 1 thread for now).
>>
>>
>> dumpling:
>>
>> file1: (g=0): rw=randwrite, bs=4K-4K/4K-4K, ioengine=libaio, iodepth=32
>> 2.0.8
>> Starting 1 thread
>> Jobs: 1 (f=1): [w] [100.0% done] [0K/72812K /s] [0 /18.3K iops] [eta
>> 00m:00s]
>> file1: (groupid=0, jobs=1): err= 0: pid=3011
>> write: io=2060.6MB, bw=70329KB/s, iops=17582 , runt= 30001msec
>> slat (usec): min=1 , max=3517 , avg= 3.42, stdev= 7.30
>> clat (usec): min=93 , max=7475 , avg=1815.72, stdev=233.43
>> lat (usec): min=219 , max=7477 , avg=1819.27, stdev=233.52
>> clat percentiles (usec):
>> | 1.00th=[ 1480], 5.00th=[ 1576], 10.00th=[ 1608], 20.00th=[
>> 1672],
>> | 30.00th=[ 1704], 40.00th=[ 1752], 50.00th=[ 1800], 60.00th=[
>> 1832],
>> | 70.00th=[ 1896], 80.00th=[ 1960], 90.00th=[ 2064], 95.00th=[
>> 2128],
>> | 99.00th=[ 2352], 99.50th=[ 2448], 99.90th=[ 4704], 99.95th=[
>> 5344],
>> | 99.99th=[ 7072]
>> bw (KB/s) : min=59696, max=77840, per=100.00%, avg=70351.27,
>> stdev=4783.25
>> lat (usec) : 100=0.01%, 250=0.01%, 500=0.01%, 750=0.01%, 1000=0.53%
>> lat (msec) : 2=85.02%, 4=14.31%, 10=0.13%
>> cpu : usr=1.96%, sys=6.71%, ctx=22791, majf=0, minf=133
>> IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=100.0%,
>> >=64=0.0%
>> submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>> >=64=0.0%
>> complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.1%, 64=0.0%,
>> >=64=0.0%
>> issued : total=r=0/w=527487/d=0, short=r=0/w=0/d=0
>>
>> Run status group 0 (all jobs):
>> WRITE: io=2060.6MB, aggrb=70329KB/s, minb=70329KB/s, maxb=70329KB/s,
>> mint=30001msec, maxt=30001msec
>>
>> Disk stats (read/write):
>> sdb: ios=166/526079, merge=0/0, ticks=24/890120, in_queue=890064,
>> util=98.73%
>>
>> firefly:
>>
>> file1: (g=0): rw=randwrite, bs=4K-4K/4K-4K, ioengine=libaio, iodepth=32
>> 2.0.8
>> Starting 1 thread
>> Jobs: 1 (f=1): [w] [100.0% done] [0K/69096K /s] [0 /17.3K iops] [eta
>> 00m:00s]
>> file1: (groupid=0, jobs=1): err= 0: pid=2982
>> write: io=1784.9MB, bw=60918KB/s, iops=15229 , runt= 30002msec
>> slat (usec): min=1 , max=1389 , avg= 3.43, stdev= 5.32
>> clat (usec): min=117 , max=8235 , avg=2096.88, stdev=396.30
>> lat (usec): min=540 , max=8258 , avg=2100.43, stdev=396.61
>> clat percentiles (usec):
>> | 1.00th=[ 1608], 5.00th=[ 1720], 10.00th=[ 1768], 20.00th=[
>> 1832],
>> | 30.00th=[ 1896], 40.00th=[ 1944], 50.00th=[ 2008], 60.00th=[
>> 2064],
>> | 70.00th=[ 2160], 80.00th=[ 2256], 90.00th=[ 2512], 95.00th=[
>> 2896],
>> | 99.00th=[ 3600], 99.50th=[ 3792], 99.90th=[ 5088], 99.95th=[
>> 6304],
>> | 99.99th=[ 6752]
>> bw (KB/s) : min=36717, max=73712, per=99.94%, avg=60879.92,
>> stdev=8302.27
>> lat (usec) : 250=0.01%, 750=0.01%
>> lat (msec) : 2=48.56%, 4=51.18%, 10=0.26%
>> cpu : usr=2.03%, sys=5.48%, ctx=20440, majf=0, minf=133
>> IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=100.0%,
>> >=64=0.0%
>> submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>> >=64=0.0%
>> complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.1%, 64=0.0%,
>> >=64=0.0%
>> issued : total=r=0/w=456918/d=0, short=r=0/w=0/d=0
>>
>> Run status group 0 (all jobs):
>> WRITE: io=1784.9MB, aggrb=60918KB/s, minb=60918KB/s, maxb=60918KB/s,
>> mint=30002msec, maxt=30002msec
>>
>> Disk stats (read/write):
>> sdb: ios=166/455574, merge=0/0, ticks=12/897748, in_queue=897696,
>> util=98.96%
>>
>
> Ok, so it looks like as you increase concurrency the effect increases
> (ie contention?). Does the same thing happen without cache enabled?
here again without rbd cache:
dumpling:
file1: (g=0): rw=randwrite, bs=4K-4K/4K-4K, ioengine=libaio, iodepth=32
2.0.8
Starting 1 thread
Jobs: 1 (f=1): [w] [100.0% done] [0K/83488K /s] [0 /20.9K iops] [eta
00m:00s]
file1: (groupid=0, jobs=1): err= 0: pid=3000
write: io=2449.2MB, bw=83583KB/s, iops=20895 , runt= 30005msec
slat (usec): min=1 , max=975 , avg= 4.50, stdev= 5.25
clat (usec): min=364 , max=80566 , avg=1525.87, stdev=1194.57
lat (usec): min=519 , max=80568 , avg=1530.51, stdev=1194.44
clat percentiles (usec):
| 1.00th=[ 660], 5.00th=[ 780], 10.00th=[ 876], 20.00th=[ 1032],
| 30.00th=[ 1144], 40.00th=[ 1240], 50.00th=[ 1304], 60.00th=[ 1384],
| 70.00th=[ 1480], 80.00th=[ 1640], 90.00th=[ 2096], 95.00th=[ 2960],
| 99.00th=[ 6816], 99.50th=[ 7840], 99.90th=[11712], 99.95th=[13888],
| 99.99th=[18816]
bw (KB/s) : min=47184, max=95432, per=100.00%, avg=83639.19,
stdev=7973.92
lat (usec) : 500=0.01%, 750=3.82%, 1000=14.40%
lat (msec) : 2=70.57%, 4=7.91%, 10=3.11%, 20=0.17%, 50=0.01%
lat (msec) : 100=0.01%
cpu : usr=3.12%, sys=11.49%, ctx=74951, majf=0, minf=133
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=100.0%,
>=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.1%, 64=0.0%,
>=64=0.0%
issued : total=r=0/w=626979/d=0, short=r=0/w=0/d=0
Run status group 0 (all jobs):
WRITE: io=2449.2MB, aggrb=83583KB/s, minb=83583KB/s, maxb=83583KB/s,
mint=30005msec, maxt=30005msec
Disk stats (read/write):
sdb: ios=168/625292, merge=0/0, ticks=144/916096, in_queue=916128,
util=99.93%
firefly:
fio --filename=/dev/sdb --direct=1 --rw=randwrite --bs=4k --numjobs=1
--thread --iodepth=32 --ioengine=libaio --runtime=30 --group_reporting
--name=file1
file1: (g=0): rw=randwrite, bs=4K-4K/4K-4K, ioengine=libaio, iodepth=32
2.0.8
Starting 1 thread
Jobs: 1 (f=1): [w] [100.0% done] [0K/90044K /s] [0 /22.6K iops] [eta
00m:00s]
file1: (groupid=0, jobs=1): err= 0: pid=2970
write: io=2372.9MB, bw=80976KB/s, iops=20244 , runt= 30006msec
slat (usec): min=1 , max=4047 , avg= 4.36, stdev= 7.17
clat (usec): min=197 , max=76656 , avg=1575.29, stdev=1165.74
lat (usec): min=523 , max=76660 , avg=1579.79, stdev=1165.59
clat percentiles (usec):
| 1.00th=[ 676], 5.00th=[ 804], 10.00th=[ 916], 20.00th=[ 1096],
| 30.00th=[ 1224], 40.00th=[ 1304], 50.00th=[ 1384], 60.00th=[ 1448],
| 70.00th=[ 1544], 80.00th=[ 1704], 90.00th=[ 2128], 95.00th=[ 2736],
| 99.00th=[ 6752], 99.50th=[ 7904], 99.90th=[12096], 99.95th=[14656],
| 99.99th=[18560]
bw (KB/s) : min=47800, max=91952, per=99.91%, avg=80900.88,
stdev=7234.98
lat (usec) : 250=0.01%, 500=0.01%, 750=2.95%, 1000=11.38%
lat (msec) : 2=73.81%, 4=8.81%, 10=2.85%, 20=0.19%, 50=0.01%
lat (msec) : 100=0.01%
cpu : usr=2.99%, sys=10.60%, ctx=66549, majf=0, minf=133
IO depths : 1=0.1%, 2=0.1%, 4=0.1%, 8=0.1%, 16=0.1%, 32=100.0%,
>=64=0.0%
submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%,
>=64=0.0%
complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.1%, 64=0.0%,
>=64=0.0%
issued : total=r=0/w=607445/d=0, short=r=0/w=0/d=0
Run status group 0 (all jobs):
WRITE: io=2372.9MB, aggrb=80976KB/s, minb=80976KB/s, maxb=80976KB/s,
mint=30006msec, maxt=30006msec
Disk stats (read/write):
sdb: ios=170/605440, merge=0/0, ticks=156/916492, in_queue=916560,
util=99.93%
Stefan
next prev parent reply other threads:[~2015-02-11 5:42 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-10 18:55 speed decrease since firefly,giant,hammer the 2nd try Stefan Priebe
2015-02-10 19:05 ` Gregory Farnum
2015-02-10 19:12 ` Stefan Priebe
2015-02-10 19:10 ` Mark Nelson
2015-02-10 19:13 ` Stefan Priebe
2015-02-10 19:40 ` Mark Nelson
2015-02-10 20:24 ` Stefan Priebe
2015-02-10 20:36 ` Mark Nelson
2015-02-10 21:11 ` Stefan Priebe
2015-02-10 21:38 ` Mark Nelson
2015-02-10 22:18 ` Stefan Priebe
2015-02-11 4:45 ` Mark Nelson
2015-02-11 5:42 ` Stefan Priebe [this message]
[not found] ` <1032317804.358821.1423634390142.JavaMail.zimbra@oxygem.tv>
2015-02-11 5:59 ` Alexandre DERUMIER
2015-02-15 18:40 ` Stefan Priebe
[not found] ` <1880785650.892634.1424077856500.JavaMail.zimbra@oxygem.tv>
2015-02-16 9:11 ` Alexandre DERUMIER
2015-02-16 14:50 ` Stefan Priebe - Profihost AG
2015-02-16 15:35 ` Mark Nelson
2015-02-16 15:36 ` Alexandre DERUMIER
2015-02-16 19:10 ` Stefan Priebe
[not found] ` <198700848.1004998.1424124086231.JavaMail.zimbra@oxygem.tv>
2015-02-16 22:01 ` Alexandre DERUMIER
[not found] ` <1760409866.980984.1424105112443.JavaMail.zimbra@oxygem.tv>
2015-02-16 16:45 ` Alexandre DERUMIER
2015-02-16 19:40 ` Stefan Priebe
2015-02-16 21:22 ` Stefan Priebe
[not found] ` <2015376321.1005004.1424124122884.JavaMail.zimbra@oxygem.tv>
2015-02-16 22:02 ` Alexandre DERUMIER
2015-02-16 22:08 ` Stefan Priebe - Profihost AG
[not found] ` <1975903570.1005549.1424125095286.JavaMail.zimbra@oxygem.tv>
2015-02-16 22:18 ` Alexandre DERUMIER
2015-02-17 9:15 ` Stefan Priebe - Profihost AG
[not found] ` <1999473015.1036573.1424165503094.JavaMail.zimbra@oxygem.tv>
2015-02-17 9:31 ` Alexandre DERUMIER
[not found] ` <764258391.358931.1423634637318.JavaMail.zimbra@oxygem.tv>
2015-02-11 6:04 ` Alexandre DERUMIER
[not found] ` <1971513819.362434.1423640637237.JavaMail.zimbra@oxygem.tv>
2015-02-11 7:44 ` Alexandre DERUMIER
2015-02-11 8:32 ` Stefan Priebe - Profihost AG
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54DAEBBD.30409@profihost.ag \
--to=s.priebe@profihost.ag \
--cc=ceph-devel@vger.kernel.org \
--cc=mnelson@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox