* Running src/ceph generates python error
@ 2016-02-18 22:05 Willem Jan Withagen
2016-02-19 0:53 ` Willem Jan Withagen
0 siblings, 1 reply; 4+ messages in thread
From: Willem Jan Withagen @ 2016-02-18 22:05 UTC (permalink / raw)
To: Ceph Development
I'm trying to run
And it terminates with:
======
.......
.......
../qa/workunits/ceph-helpers.sh:555: activate_osd: mkdir -p
testdir/test-erasure-code/0
../qa/workunits/ceph-helpers.sh:556: activate_osd:
CEPH_ARGS='--fsid=d9e9b487-d5e0-11e5-be15-1c6f6582ec12
--auth-supported=none -
-mon-host=127.0.0.1:7101 --osd-backfill-full-ratio=.99
--osd-failsafe-full-ratio=.99 --osd-journal-size=100 --osd-scrub-load-thre
shold=2000 --osd-data=testdir/test-erasure-code/0 --chdir=
--erasure-code-dir=.libs --plugin-dir=.libs --osd-class-dir=.libs --run
-dir=testdir/test-erasure-code --debug-osd=20
--log-file=testdir/test-erasure-code/$name.log
--pid-file=testdir/test-erasure-code/
$name.pid '
../qa/workunits/ceph-helpers.sh:556: activate_osd: ceph-disk
--statedir=testdir/test-erasure-code --sysconfdir=testdir/test-erasu
re-code --prepend-to-path= activate --mark-init=none
testdir/test-erasure-code/0
ceph-disk: Error: ceph osd create failed: Command './ceph' returned
non-zero exit status 22: --plugin-dir=.libs not valid: --plug
in-dir=.libs doesn't represent an int
Invalid command: unused arguments: [u'--plugin-dir=.libs']
osd create {<uuid>} {<int[0-]>} : create new osd (with optional UUID
and ID)
Error EINVAL: invalid command
======
So it seems it does not like all the values that are put in the
ENV{CEPH_ARGS}.
Is this just my problem?
And if so, what am I doing wrong?
--WjW
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Running src/ceph generates python error
2016-02-18 22:05 Running src/ceph generates python error Willem Jan Withagen
@ 2016-02-19 0:53 ` Willem Jan Withagen
2016-02-19 4:20 ` Loic Dachary
0 siblings, 1 reply; 4+ messages in thread
From: Willem Jan Withagen @ 2016-02-19 0:53 UTC (permalink / raw)
To: Ceph Development
On 18-2-2016 23:05, Willem Jan Withagen wrote:
> I'm trying to run
I was not quite complex in my message:
Running: test/erasure-code/test-erasure-code.sh
And I can get it actually working when I comment out the line:
../qa/workunits/ceph-helpers.sh: line 547
# ceph_args+=" --plugin-dir=.libs"
But the error seems to be because of an error in the python script
called then refuses the about --plugin-dir option
--WjW
> And it terminates with:
> ======
> .......
> .......
> ../qa/workunits/ceph-helpers.sh:555: activate_osd: mkdir -p
> testdir/test-erasure-code/0
> ../qa/workunits/ceph-helpers.sh:556: activate_osd:
> CEPH_ARGS='--fsid=d9e9b487-d5e0-11e5-be15-1c6f6582ec12
> --auth-supported=none -
> -mon-host=127.0.0.1:7101 --osd-backfill-full-ratio=.99
> --osd-failsafe-full-ratio=.99 --osd-journal-size=100 --osd-scrub-load-thre
> shold=2000 --osd-data=testdir/test-erasure-code/0 --chdir=
> --erasure-code-dir=.libs --plugin-dir=.libs --osd-class-dir=.libs --run
> -dir=testdir/test-erasure-code --debug-osd=20
> --log-file=testdir/test-erasure-code/$name.log
> --pid-file=testdir/test-erasure-code/
> $name.pid '
> ../qa/workunits/ceph-helpers.sh:556: activate_osd: ceph-disk
> --statedir=testdir/test-erasure-code --sysconfdir=testdir/test-erasu
> re-code --prepend-to-path= activate --mark-init=none
> testdir/test-erasure-code/0
> ceph-disk: Error: ceph osd create failed: Command './ceph' returned
> non-zero exit status 22: --plugin-dir=.libs not valid: --plug
> in-dir=.libs doesn't represent an int
> Invalid command: unused arguments: [u'--plugin-dir=.libs']
> osd create {<uuid>} {<int[0-]>} : create new osd (with optional UUID
> and ID)
> Error EINVAL: invalid command
>
> ======
>
> So it seems it does not like all the values that are put in the
> ENV{CEPH_ARGS}.
>
> Is this just my problem?
> And if so, what am I doing wrong?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Running src/ceph generates python error
2016-02-19 0:53 ` Willem Jan Withagen
@ 2016-02-19 4:20 ` Loic Dachary
2016-02-19 7:22 ` Willem Jan Withagen
0 siblings, 1 reply; 4+ messages in thread
From: Loic Dachary @ 2016-02-19 4:20 UTC (permalink / raw)
To: Willem Jan Withagen, Ceph Development
Hi,
I suspect this is something you changed in your branch. Is there a way to compare your branch with the current master ?
Cheers
On 19/02/2016 07:53, Willem Jan Withagen wrote:
> On 18-2-2016 23:05, Willem Jan Withagen wrote:
>> I'm trying to run
>
> I was not quite complex in my message:
> Running: test/erasure-code/test-erasure-code.sh
>
> And I can get it actually working when I comment out the line:
> ../qa/workunits/ceph-helpers.sh: line 547
> # ceph_args+=" --plugin-dir=.libs"
>
> But the error seems to be because of an error in the python script
> called then refuses the about --plugin-dir option
>
> --WjW
>
>> And it terminates with:
>> ======
>> .......
>> .......
>> ../qa/workunits/ceph-helpers.sh:555: activate_osd: mkdir -p
>> testdir/test-erasure-code/0
>> ../qa/workunits/ceph-helpers.sh:556: activate_osd:
>> CEPH_ARGS='--fsid=d9e9b487-d5e0-11e5-be15-1c6f6582ec12
>> --auth-supported=none -
>> -mon-host=127.0.0.1:7101 --osd-backfill-full-ratio=.99
>> --osd-failsafe-full-ratio=.99 --osd-journal-size=100 --osd-scrub-load-thre
>> shold=2000 --osd-data=testdir/test-erasure-code/0 --chdir=
>> --erasure-code-dir=.libs --plugin-dir=.libs --osd-class-dir=.libs --run
>> -dir=testdir/test-erasure-code --debug-osd=20
>> --log-file=testdir/test-erasure-code/$name.log
>> --pid-file=testdir/test-erasure-code/
>> $name.pid '
>> ../qa/workunits/ceph-helpers.sh:556: activate_osd: ceph-disk
>> --statedir=testdir/test-erasure-code --sysconfdir=testdir/test-erasu
>> re-code --prepend-to-path= activate --mark-init=none
>> testdir/test-erasure-code/0
>> ceph-disk: Error: ceph osd create failed: Command './ceph' returned
>> non-zero exit status 22: --plugin-dir=.libs not valid: --plug
>> in-dir=.libs doesn't represent an int
>> Invalid command: unused arguments: [u'--plugin-dir=.libs']
>> osd create {<uuid>} {<int[0-]>} : create new osd (with optional UUID
>> and ID)
>> Error EINVAL: invalid command
>>
>> ======
>>
>> So it seems it does not like all the values that are put in the
>> ENV{CEPH_ARGS}.
>>
>> Is this just my problem?
>> And if so, what am I doing wrong?
>
> --
> To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Loïc Dachary, Artisan Logiciel Libre
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Running src/ceph generates python error
2016-02-19 4:20 ` Loic Dachary
@ 2016-02-19 7:22 ` Willem Jan Withagen
0 siblings, 0 replies; 4+ messages in thread
From: Willem Jan Withagen @ 2016-02-19 7:22 UTC (permalink / raw)
To: Loic Dachary, Ceph Development
On 19-2-2016 05:20, Loic Dachary wrote:
> Hi,
>
> I suspect this is something you changed in your branch. Is there a way to compare your branch with the current master ?
I try to stay away from changing python too much, since I'm not really
into python.
But then that could be the reason I made a mess of it.
I have a ceph/master here as well.
I'll pull/rebase both, and then run diff over the *py files.
It seems to come from calling src/ceph, since I've isolated the eronous
call to:
./ceph osd create --fsid=d9e9b487-d5e0-11e5-be15-1c6f6582ec12
--auth-supported=none --mon-host=127.0.0.1:7101
--osd-backfill-full-ratio=.99 --osd-failsafe-full-ratio=.99
--osd-journal-size=100 --osd-scrub-load-threshold=2000
--osd-data=testdir/test-erasure-code/0 --chdir= --erasure-code-dir=.libs
--plugin-dir=.libs --osd-class-dir=.libs --run
-dir=testdir/test-erasure-code --debug-osd=20
--log-file=testdir/test-erasure-code/$name.log
--pid-file=testdir/test-erasure-code/$name.pid
So it has got to be in that code (or imports) somewhere.
--WjW
> Cheers
>
> On 19/02/2016 07:53, Willem Jan Withagen wrote:
>> On 18-2-2016 23:05, Willem Jan Withagen wrote:
>>> I'm trying to run
>>
>> I was not quite complex in my message:
>> Running: test/erasure-code/test-erasure-code.sh
>>
>> And I can get it actually working when I comment out the line:
>> ../qa/workunits/ceph-helpers.sh: line 547
>> # ceph_args+=" --plugin-dir=.libs"
>>
>> But the error seems to be because of an error in the python script
>> called then refuses the about --plugin-dir option
>>
>> --WjW
>>
>>> And it terminates with:
>>> ======
>>> .......
>>> .......
>>> ../qa/workunits/ceph-helpers.sh:555: activate_osd: mkdir -p
>>> testdir/test-erasure-code/0
>>> ../qa/workunits/ceph-helpers.sh:556: activate_osd:
>>> CEPH_ARGS='--fsid=d9e9b487-d5e0-11e5-be15-1c6f6582ec12
>>> --auth-supported=none -
>>> -mon-host=127.0.0.1:7101 --osd-backfill-full-ratio=.99
>>> --osd-failsafe-full-ratio=.99 --osd-journal-size=100 --osd-scrub-load-thre
>>> shold=2000 --osd-data=testdir/test-erasure-code/0 --chdir=
>>> --erasure-code-dir=.libs --plugin-dir=.libs --osd-class-dir=.libs --run
>>> -dir=testdir/test-erasure-code --debug-osd=20
>>> --log-file=testdir/test-erasure-code/$name.log
>>> --pid-file=testdir/test-erasure-code/
>>> $name.pid '
>>> ../qa/workunits/ceph-helpers.sh:556: activate_osd: ceph-disk
>>> --statedir=testdir/test-erasure-code --sysconfdir=testdir/test-erasu
>>> re-code --prepend-to-path= activate --mark-init=none
>>> testdir/test-erasure-code/0
>>> ceph-disk: Error: ceph osd create failed: Command './ceph' returned
>>> non-zero exit status 22: --plugin-dir=.libs not valid: --plug
>>> in-dir=.libs doesn't represent an int
>>> Invalid command: unused arguments: [u'--plugin-dir=.libs']
>>> osd create {<uuid>} {<int[0-]>} : create new osd (with optional UUID
>>> and ID)
>>> Error EINVAL: invalid command
>>>
>>> ======
>>>
>>> So it seems it does not like all the values that are put in the
>>> ENV{CEPH_ARGS}.
>>>
>>> Is this just my problem?
>>> And if so, what am I doing wrong?
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-02-19 7:22 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-18 22:05 Running src/ceph generates python error Willem Jan Withagen
2016-02-19 0:53 ` Willem Jan Withagen
2016-02-19 4:20 ` Loic Dachary
2016-02-19 7:22 ` Willem Jan Withagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox