From: "Serge E. Hallyn" <serue-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
To: "Eric W. Biederman" <ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org>
Cc: Linux Containers <containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org>
Subject: Re: [PATCH 1/1] RFC: taking a crack at targeted capabilities
Date: Wed, 6 Jan 2010 11:30:56 -0600 [thread overview]
Message-ID: <20100106173056.GC15784@us.ibm.com> (raw)
In-Reply-To: <m13a2j2q7c.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
Quoting Eric W. Biederman (ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org):
> "Serge E. Hallyn" <serue-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org> writes:
>
> > So i was thinking about how to safely but incrementally introduce
> > targeted capabilities - which we decided was a prereq to making VFS
> > handle user namespaces - and the following seemed doable. My main
> > motivations were (in order):
> >
> > 1. don't make any unconverted capable() checks unsafe
> > 2. minimize performance impact on non-container case
> > 3. minimize performance impact on containers
> >
> > This patch adds a per-task inherited securebit SECURE_CONTAINERIZED.
> > The capable() call is considered unconverted. Therefore any call
> > to capable() by a task which is SECURE_CONTAINERIZED returns -EPERM.
> >
> > A new syscall capable_to() is the container-aware version of capable().
> >
> > int capable_to(int cap, enum ns_type type, void *src, void *dest);
> >
> > meaning a task which owns 'src' wants 'cap' access to an object
> > in namespace 'dest'.
> >
> > In a case like setting hostname, there is no way to try to set the
> > hostname in another container, so the check is converted in this patch to
> >
> > capable_to(CAP_SYS_ADMIN, NS_TYPE_NONE, NULL, NULL);
> >
> > capable_to() will act like the old capable(), meaning grant permission
> > if CAP_SYS_ADMIN is in pE.
> >
> > The check for sending a signal depends on a user namespace, so I
> > converted an instance to
> >
> > capable_to(CAP_KILL, NS_TYPE_USERNS, current_userns(),
> > target->user_ns);
> >
> > The NS_TYPE_USERNS check checks whether target->userns is the same
> > as or a descendent of target->user_ns. If not, then -EPERM is
> > returned even if the task has CAP_KILL.
> >
> > To test, compile a program (call it 'containerize_cap') that does
> >
> > prctl(PR_SET_SECUREBITS, 1 << 6 | 1 << 7);
> > execl("/bin/bash", "bash", NULL);
> >
> > Run that in a container (say, do 'ns_exec -cmpuU /bin/bash' and
> > run screen there). Notice you can set hostname, but you can't
> > for instance read user's directories which don't have world write
> > perms, and can't mount. You can also kill processes which are
> > either in your own or a child user namespace, but not in a parent
> > user namespace.
> >
> > Purely for discussion. Comments?
>
> This looks like a good start of discussion, and you have
> choosen two good examples.
>
> I believe your check for ancestor user namespaces is actually
> too liberal, I can't quite follow it but it looks like any
> process in an ancestor user namespace has all rights over
> a child, which would let fred kill joe's processes..
But that's only if fred has CAP_KILL in a user namespace which is
ancestor to joe's process. Only fred's processes in a child
userns should have CAP_KILL.
> I think we can use a much simpler definition, based on the core
> concept that we are making the capabilities namespace relative,
> thus we need to pass in which namespace we want the capability for.
>
> /* Put in kernel/capability.c */
> int capable(int cap)
> {
> return capable_to(&init_user_ns, cap);
> }
>
> int capable_to(struct user_namespace *ns, int cap)
> {
> if (unlikely(!cap_valid(cap))) {
> printk(KERN_CRIT "capable() called with invalid cap=%u\n", cap);
> BUG();
> }
>
> if (security_capable(ns, cap) == 0) {
> current->flags |= PF_SUPERPRIV;
> return 1;
> }
> return 0;
> }
>
> /* Put in security/common_cap.c */
> int cap_capable(struct task_struct *tsk, const cred *cred,
> struct user_namespace *targ_ns, int targ_cap, int audit)
> {
> struct user_namespace *curr_ns = cred->user->user_ns
>
> for (;;) {
> /* Do we have the necessary capabilities? */
> if (targ_ns == curr_ns)
> return cap_raised(cred->cap_effective, cap) ? 0 : -EPERM;
>
> /* The creator of the user namespace has all caps. */
> if (targ_ns->creator == cred->user)
> return 0;
>
> /* Have we tried all of the parent namespaces? */
> if (targ_ns == &init_user_ns)
> return -EPERM;
>
> /* If you have the capability in a parent user ns you have it
> * in the over all children user namespaces as well, so see
> * if this process has the capability in the parent user
> * namespace.
> */
> targ_ns = targ_ns->creator->user_ns;
> }
>
> /* We never get here */
> return -EPERM;
> }
>
>
> The example in check_kill_permission simply becomes:
> capable_to(tcred->user->user_ns, CAP_KILL);
>
> While the check in hostname remains unchanged until we convert teach
> the userns to unshare without privilege. At which point the check should
> become.
> capable_to(utsname()->creator->user_ns, CAP_SYS_ADMIN);
>
> Which matters because we can set the hostname through /proc/sys....
Oh, right. However, utsname doesn't have a creator, and we won't always
want to use user namespaces to authorize. For instance, for CAP_NET_ADMIN
we'll want to compare the net_ns. That's why i had the switch inside
capable_to() based on ns type.
-serge
next prev parent reply other threads:[~2010-01-06 17:30 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-06 6:28 [PATCH 1/1] RFC: taking a crack at targeted capabilities Serge E. Hallyn
[not found] ` <20100106062809.GA17064-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-01-06 15:44 ` Eric W. Biederman
[not found] ` <m13a2j2q7c.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2010-01-06 17:30 ` Serge E. Hallyn [this message]
[not found] ` <20100106173056.GC15784-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-01-06 20:43 ` Eric W. Biederman
2010-01-06 16:56 ` Eric W. Biederman
[not found] ` <m17hrv18ad.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2010-01-06 17:35 ` Serge E. Hallyn
[not found] ` <20100106173536.GD15784-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-01-06 20:57 ` Eric W. Biederman
2010-01-06 20:17 ` Serge E. Hallyn
[not found] ` <20100106201725.GA24242-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-01-06 21:11 ` Eric W. Biederman
[not found] ` <m1skajszuw.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2010-01-06 21:57 ` Serge E. Hallyn
[not found] ` <20100106215721.GA5823-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-01-07 0:16 ` Eric W. Biederman
2010-02-15 14:27 ` Matt Helsley
[not found] ` <20100215142746.GD3714-52DBMbEzqgQ/wnmkkaCWp/UQ3DHhIser@public.gmane.org>
2010-02-15 16:16 ` Eric W. Biederman
[not found] ` <m13a12bhjq.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2010-02-15 16:37 ` Matt Helsley
[not found] ` <20100215163708.GG3714-52DBMbEzqgQ/wnmkkaCWp/UQ3DHhIser@public.gmane.org>
2010-02-15 16:48 ` Eric W. Biederman
2010-02-15 4:05 ` Serge E. Hallyn
[not found] ` <20100215040529.GA20519-r/Jw6+rmf7HQT0dZR+AlfA@public.gmane.org>
2010-02-15 11:06 ` Eric W. Biederman
[not found] ` <m1ocjqep25.fsf-+imSwln9KH6u2/kzUuoCbdi2O/JbrIOy@public.gmane.org>
2010-02-16 22:07 ` Serge E. Hallyn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100106173056.GC15784@us.ibm.com \
--to=serue-r/jw6+rmf7hqt0dzr+alfa@public.gmane.org \
--cc=containers-qjLDD68F18O7TbgM5vRIOg@public.gmane.org \
--cc=ebiederm-aS9lmoZGLiVWk0Htik3J/w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox