* [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default
@ 2026-11-20 6:07 SJ Park
2026-11-20 6:07 ` [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune " SJ Park
` (4 more replies)
0 siblings, 5 replies; 12+ messages in thread
From: SJ Park @ 2026-11-20 6:07 UTC (permalink / raw)
Cc: SJ Park, Andrew Morton, Jonathan Corbet, Randy Dunlap, Shuah Khan,
damon, linux-doc, linux-mm
The initial version of DAMON_RECLAIM was supposed to be used after
manual tuning of its parameters. Among the parameters, the monitoring
intervals (sample_interval and aggr_interval) and the coldness threshold
(min_age) are particularly important to be optimally tuned. The optimum
values for the parameters tend to be highly dependent on the workload
and the system. Hence no small amount of tuning efforts are required to
each DAMON_RECLAIM use case.
To reduce the tuning efforts, we recently introduced two auto-tuning
features. Intervals auto-tuning (autotune_monitoring_intervals)
automatically tunes monitoring intervals to provide practical and
efficient monitoring results. PSI-driven quota auto-tuning
(quota_autotune_feedback) automatically tunes the coldness threshold.
Because the auto-tuning features were introduced after the initial
version, the features are disabled by default. That is to keep the
default behaviors unchanged. However, enabling the auto-tuning features
is only expected to provide more benefit to the users. Disabling those
by default only makes the adoption of the features slow. Also, it is
difficult to imagine real users who use DAMON_RECLAIM with its default
parameter values.
Enable the auto-tuning features by default. For PSI-driven coldness
threshold auto-tuning, set 0.05% memory pressure ratio as the target.
Free memory ratio based reclaim watermarks were introduced as a safe
guard for unoptimized coldness threshold. Because it is now reasonably
auto-tuned, disable the watermark feature by default.
Enable the monitoring intervals auto-tuning and PSI-driven coldness
threshold auto-tuning via patches 1 and 2, respectively. Disable the
free memory ratio based watermarks via patch 3. Finally update the user
document to reflect the changed default values, via patch 4.
SJ Park (4):
mm/damon/reclaim: enable monitoring intervals auto-tune by default
mm/damon/reclaim: set memory PSI 0.05% as default quota goal
mm/damon/reclaim: disable watermarks by default
Docs/admin-guide/mm/damon/reclaim: update for changed default
parameters
Documentation/admin-guide/mm/damon/reclaim.rst | 7 ++++---
mm/damon/reclaim.c | 15 ++++++++-------
2 files changed, 12 insertions(+), 10 deletions(-)
base-commit: 0ec5c1c237bdf91ae93b3efe32767aad9a670f8a
--
2.47.3
^ permalink raw reply [flat|nested] 12+ messages in thread
* [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune by default
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
@ 2026-11-20 6:07 ` SJ Park
2026-11-20 6:21 ` sashiko-bot
2026-11-20 6:07 ` [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal SJ Park
` (3 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: SJ Park @ 2026-11-20 6:07 UTC (permalink / raw)
Cc: SJ Park, Andrew Morton, damon, linux-mm
DAMON_RECLAIM provides monitoring intervals auto-tuning feature. It is
turned off by default, though. It is expected to be only better than
the default values of static intervals in real use cases. Enable the
auto-tuning.
Signed-off-by: SJ Park <sj@kernel.org>
---
mm/damon/reclaim.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/damon/reclaim.c b/mm/damon/reclaim.c
index a84cea070ec76..2241b3e9145ef 100644
--- a/mm/damon/reclaim.c
+++ b/mm/damon/reclaim.c
@@ -98,9 +98,9 @@ module_param(quota_autotune_feedback, ulong, 0600);
* sampling intervals 5 milliseconds in minimum, and 10 seconds in maximum.
* Setting this to ``N`` disables the auto-tuning.
*
- * Disabled by default.
+ * Enabled by default.
*/
-static bool autotune_monitoring_intervals __read_mostly;
+static bool autotune_monitoring_intervals __read_mostly = true;
module_param(autotune_monitoring_intervals, bool, 0600);
static struct damos_watermarks damon_reclaim_wmarks = {
--
2.47.3
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
2026-11-20 6:07 ` [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune " SJ Park
@ 2026-11-20 6:07 ` SJ Park
2026-11-20 6:13 ` sashiko-bot
2026-11-21 12:39 ` Aveline Noir
2026-11-20 6:07 ` [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default SJ Park
` (2 subsequent siblings)
4 siblings, 2 replies; 12+ messages in thread
From: SJ Park @ 2026-11-20 6:07 UTC (permalink / raw)
Cc: SJ Park, Andrew Morton, damon, linux-mm
DAMON_RECLAIM provides a PSI-driven quota auto-tuning feature. Because
of the DAMOS quota internal access pattern based region prioritization,
it means the coldness threshold (min_age) is also auto-tuned. It is
tuned off by default, though. The feature is expected to be only better
to be enabled. Enable it by default. Set 0.5 milliseconds per second
(0.5%) as the default auto-tuning target memory pressure ratio.
Signed-off-by: SJ Park <sj@kernel.org>
---
mm/damon/reclaim.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/mm/damon/reclaim.c b/mm/damon/reclaim.c
index 2241b3e9145ef..d297b1596704b 100644
--- a/mm/damon/reclaim.c
+++ b/mm/damon/reclaim.c
@@ -69,9 +69,9 @@ DEFINE_DAMON_MODULES_DAMOS_QUOTAS(damon_reclaim_quota);
* compared to this value to see if the aim is satisfied. Value zero means
* disabling this auto-tuning feature.
*
- * Disabled by default.
+ * 500 microseconds (0.05% of default quota reset interval) by default.
*/
-static unsigned long quota_mem_pressure_us __read_mostly;
+static unsigned long quota_mem_pressure_us __read_mostly = 500;
module_param(quota_mem_pressure_us, ulong, 0600);
/*
--
2.47.3
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
2026-11-20 6:07 ` [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune " SJ Park
2026-11-20 6:07 ` [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal SJ Park
@ 2026-11-20 6:07 ` SJ Park
2026-11-20 6:11 ` sashiko-bot
2026-11-20 6:07 ` [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters SJ Park
2026-11-21 1:53 ` [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
4 siblings, 1 reply; 12+ messages in thread
From: SJ Park @ 2026-11-20 6:07 UTC (permalink / raw)
Cc: SJ Park, Andrew Morton, damon, linux-mm
DAMON_RECLAIM's free memory based watermarks features were introduced as
a safe guard for wrongly-tuned coldness threshold (min_age). The
default watermark values were chosen to let users easily understand how
those can be set and tuned. The default values are never meant to be
used as are. DAMON_RECLAIM is later updated to enable PSI-driven
coldness threshold auto-tuning by default. When the auto-tuning is
enabled, having the watermarks with the default values makes no sense.
Disable the watermarks by default.
Signed-off-by: SJ Park <sj@kernel.org>
---
mm/damon/reclaim.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/mm/damon/reclaim.c b/mm/damon/reclaim.c
index d297b1596704b..a8b18f51e99d5 100644
--- a/mm/damon/reclaim.c
+++ b/mm/damon/reclaim.c
@@ -103,12 +103,13 @@ module_param(quota_autotune_feedback, ulong, 0600);
static bool autotune_monitoring_intervals __read_mostly = true;
module_param(autotune_monitoring_intervals, bool, 0600);
+/* Watermarks are effectively disabled by default. */
static struct damos_watermarks damon_reclaim_wmarks = {
.metric = DAMOS_WMARK_FREE_MEM_RATE,
.interval = 5000000, /* 5 seconds */
- .high = 500, /* 50 percent */
- .mid = 400, /* 40 percent */
- .low = 200, /* 20 percent */
+ .high = 1000, /* 100 percent */
+ .mid = 1000, /* 100 percent */
+ .low = 0, /* 0 percent */
};
DEFINE_DAMON_MODULES_WMARKS_PARAMS(damon_reclaim_wmarks);
--
2.47.3
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
` (2 preceding siblings ...)
2026-11-20 6:07 ` [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default SJ Park
@ 2026-11-20 6:07 ` SJ Park
2026-11-20 6:10 ` sashiko-bot
2026-11-21 1:53 ` [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
4 siblings, 1 reply; 12+ messages in thread
From: SJ Park @ 2026-11-20 6:07 UTC (permalink / raw)
Cc: SJ Park, Jonathan Corbet, Randy Dunlap, Shuah Khan, damon,
linux-doc, linux-mm
Update DAMON_RECLAIM user documentation to reflect the changed default
parameter values. Intervals and PSI-driven coldness threshold
auto-tuning features are enabled by default. The free memory ratio
based watermarks feature is disabled by default.
Signed-off-by: SJ Park <sj@kernel.org>
---
Documentation/admin-guide/mm/damon/reclaim.rst | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/Documentation/admin-guide/mm/damon/reclaim.rst b/Documentation/admin-guide/mm/damon/reclaim.rst
index 0ef784df98680..79d24e3819cea 100644
--- a/Documentation/admin-guide/mm/damon/reclaim.rst
+++ b/Documentation/admin-guide/mm/damon/reclaim.rst
@@ -95,7 +95,7 @@ amount of access events in each DAMON-snapshot, while keeping the sampling
interval 5 milliseconds in minimum, and 10 seconds in maximum. Setting this to
``N`` disables the auto-tuning.
-Disabled by default.
+Enabled by default.
quota_ms
--------
@@ -145,7 +145,7 @@ per quota reset interval (``quota_reset_interval_ms``) is collected and
compared to this value to see if the aim is satisfied. Value zero means
disabling this auto-tuning feature.
-Disabled by default.
+500 microseconds (0.05 percent of default quota reset interval) by default.
quota_autotune_feedback
-----------------------
@@ -196,7 +196,8 @@ granularity reclamation logic.
To keep DAMON_RECLAIM always active regardless of the free memory rate, set
``wmarks_high``, ``wmarks_mid`` and ``wmarks_low`` to ``1000``, ``1000`` and
-``0``, respectively.
+``0``, respectively. Use of watermarks is not recommended and therefore
+disabled by default.
sample_interval
---------------
--
2.47.3
^ permalink raw reply related [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters
2026-11-20 6:07 ` [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters SJ Park
@ 2026-11-20 6:10 ` sashiko-bot
0 siblings, 0 replies; 12+ messages in thread
From: sashiko-bot @ 2026-11-20 6:10 UTC (permalink / raw)
To: SJ Park; +Cc: damon
> Update DAMON_RECLAIM user documentation to reflect the changed default
> parameter values. Intervals and PSI-driven coldness threshold
> auto-tuning features are enabled by default. The free memory ratio
> based watermarks feature is disabled by default.
>
> Signed-off-by: SJ Park <sj@kernel.org>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120060741.92121-1-sj@kernel.org?part=4
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default
2026-11-20 6:07 ` [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default SJ Park
@ 2026-11-20 6:11 ` sashiko-bot
0 siblings, 0 replies; 12+ messages in thread
From: sashiko-bot @ 2026-11-20 6:11 UTC (permalink / raw)
To: SJ Park; +Cc: damon
> DAMON_RECLAIM's free memory based watermarks features were introduced as
> a safe guard for wrongly-tuned coldness threshold (min_age). The
> default watermark values were chosen to let users easily understand how
> those can be set and tuned. The default values are never meant to be
> used as are. DAMON_RECLAIM is later updated to enable PSI-driven
> coldness threshold auto-tuning by default. When the auto-tuning is
> enabled, having the watermarks with the default values makes no sense.
> Disable the watermarks by default.
>
> Signed-off-by: SJ Park <sj@kernel.org>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120060741.92121-1-sj@kernel.org?part=3
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal
2026-11-20 6:07 ` [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal SJ Park
@ 2026-11-20 6:13 ` sashiko-bot
2026-11-21 12:39 ` Aveline Noir
1 sibling, 0 replies; 12+ messages in thread
From: sashiko-bot @ 2026-11-20 6:13 UTC (permalink / raw)
To: SJ Park; +Cc: damon
> DAMON_RECLAIM provides a PSI-driven quota auto-tuning feature. Because
> of the DAMOS quota internal access pattern based region prioritization,
> it means the coldness threshold (min_age) is also auto-tuned. It is
> tuned off by default, though. The feature is expected to be only better
> to be enabled. Enable it by default. Set 0.5 milliseconds per second
> (0.5%) as the default auto-tuning target memory pressure ratio.
>
> Signed-off-by: SJ Park <sj@kernel.org>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120060741.92121-1-sj@kernel.org?part=2
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune by default
2026-11-20 6:07 ` [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune " SJ Park
@ 2026-11-20 6:21 ` sashiko-bot
0 siblings, 0 replies; 12+ messages in thread
From: sashiko-bot @ 2026-11-20 6:21 UTC (permalink / raw)
To: SJ Park; +Cc: damon
> DAMON_RECLAIM provides monitoring intervals auto-tuning feature. It is
> turned off by default, though. It is expected to be only better than
> the default values of static intervals in real use cases. Enable the
> auto-tuning.
>
> Signed-off-by: SJ Park <sj@kernel.org>
Sashiko has reviewed this patch and found no issues.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120060741.92121-1-sj@kernel.org?part=1
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
` (3 preceding siblings ...)
2026-11-20 6:07 ` [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters SJ Park
@ 2026-11-21 1:53 ` SJ Park
4 siblings, 0 replies; 12+ messages in thread
From: SJ Park @ 2026-11-21 1:53 UTC (permalink / raw)
To: SJ Park
Cc: Andrew Morton, Jonathan Corbet, Randy Dunlap, Shuah Khan, damon,
linux-doc, linux-mm, arijit.desaii
On Thu, 19 Nov 2026 22:07:34 -0800 SJ Park <sj@kernel.org> wrote:
> The initial version of DAMON_RECLAIM was supposed to be used after
> manual tuning of its parameters. Among the parameters, the monitoring
> intervals (sample_interval and aggr_interval) and the coldness threshold
> (min_age) are particularly important to be optimally tuned. The optimum
> values for the parameters tend to be highly dependent on the workload
> and the system. Hence no small amount of tuning efforts are required to
> each DAMON_RECLAIM use case.
>
> To reduce the tuning efforts, we recently introduced two auto-tuning
> features. Intervals auto-tuning (autotune_monitoring_intervals)
> automatically tunes monitoring intervals to provide practical and
> efficient monitoring results. PSI-driven quota auto-tuning
> (quota_autotune_feedback) automatically tunes the coldness threshold.
>
> Because the auto-tuning features were introduced after the initial
> version, the features are disabled by default. That is to keep the
> default behaviors unchanged. However, enabling the auto-tuning features
> is only expected to provide more benefit to the users. Disabling those
> by default only makes the adoption of the features slow. Also, it is
> difficult to imagine real users who use DAMON_RECLAIM with its default
> parameter values.
>
> Enable the auto-tuning features by default.
My colleague, Arijit, found this is not a good idea. He is now working on
proving the theory and making a patch.
DAMON_RECLAIM receives the coldness throughput via 'min_age' parameter, which
has 2 minutes as the default value. DAMON_RECLAIM converts that into the
number of aggregation intervals for the time, and set it as the min_age_region
of the damos_access_pattern for its reclamation DAMOS scheme. DAMON_RECLAIM
does the conversion when it starts working, or a parameter is updated online,
using commit_inputs parameter. It doesn't update the min_age_region value when
the aggregation interval is auto-tuned.
This patchset enables the intervals auto-tuning features so that the
aggregation intervals span from 100 milliseconds to 200 seconds (up to 2,000
x). As a result, the effective min_age can span from 2 minutes to 4,000
minutes.
In usual real workload, the auto-tuning converges the aggregation interval to a
few seconds (20-200x). The effective min_age will be about 40 minutes to 400
minutes. Even on long term real world workload, that could be too much
threshold. The user will show DAMON_RECLAIM is reclaiming only unexpectedly
small amount of memory.
PSI-driven coldness threshold auto-tuning can make the effective min_age only
longer, so it doesn't help.
One strightforward workaround would be setting the min_age a small value, like
2-4 aggregation intervals (200-400 milliseconds). Then, in usual case, the
effective min_age becomes 4 seconds to 40 seconds. It might feel like too
small threshold. PSI-driven coldness threshold auto-tuning will make it
better.
Yet another workaround would be monitoring the auto-tuned interval and update
the min_age online, using the commit_inputs parameter.
We introduced age_ms DAMOS filter type [1] to fix this kind of issue. Long
term solution for DAMON_RECLAIM would be modifying it to use the age_ms DAMOS
filter instead of the aggregation interval based min_age_region.
My colleague, Arijit, is working on the long term solution. Until it is
arrived, I will keep the RFC tag of this patch series.
[1] https://lore.kernel.org/20261106020559.98352-1-sj@kernel.org
Thanks,
SJ
[...]
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal
2026-11-20 6:07 ` [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal SJ Park
2026-11-20 6:13 ` sashiko-bot
@ 2026-11-21 12:39 ` Aveline Noir
2026-11-21 17:23 ` SJ Park
1 sibling, 1 reply; 12+ messages in thread
From: Aveline Noir @ 2026-11-21 12:39 UTC (permalink / raw)
To: SJ Park
Cc: Andrew Morton, arijit.desaii, Jonathan Corbet, damon, linux-doc,
linux-mm, Randy Dunlap, sashiko-bot, sashiko-reviews, Shuah Khan
Hi SJ,
On Thu, 19 Nov 2026 22:07:36 -0800 SJ Park wrote:
> Set 0.5 milliseconds per second
> (0.5%) as the default auto-tuning target memory pressure ratio.
0.5 ms per second comes out to 0.05%.
> +static unsigned long quota_mem_pressure_us __read_mostly = 500;
With a fixed 500 us target, maybe a longer aggregation interval also
lengthen the PSI measurement window. For example, if the quota ends up
being reset every 2 s, should 1000 us of stalls still be compared
against 500 us? If so, the tuner would drop the effective quota
to 1 byte, skipping pageout for the next quota window.
Thanks,
Aveline Noir
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal
2026-11-21 12:39 ` Aveline Noir
@ 2026-11-21 17:23 ` SJ Park
0 siblings, 0 replies; 12+ messages in thread
From: SJ Park @ 2026-11-21 17:23 UTC (permalink / raw)
To: Aveline Noir
Cc: SJ Park, Andrew Morton, arijit.desaii, Jonathan Corbet, damon,
linux-doc, linux-mm, Randy Dunlap, sashiko-bot, sashiko-reviews,
Shuah Khan
Hi Aveline,
On Sat, 21 Nov 2026 23:39:16 +1100 Aveline Noir <jm5905938@gmail.com> wrote:
> Hi SJ,
>
> On Thu, 19 Nov 2026 22:07:36 -0800 SJ Park wrote:
>
> > Set 0.5 milliseconds per second
> > (0.5%) as the default auto-tuning target memory pressure ratio.
>
> 0.5 ms per second comes out to 0.05%.
>
> > +static unsigned long quota_mem_pressure_us __read_mostly = 500;
>
> With a fixed 500 us target, maybe a longer aggregation interval also
> lengthen the PSI measurement window. For example, if the quota ends up
> being reset every 2 s, should 1000 us of stalls still be compared
> against 500 us? If so, the tuner would drop the effective quota
> to 1 byte, skipping pageout for the next quota window.
DAMOS quota is not reset for aggregation interval. It has a separate interval
for quota reset. It is exposed to users via quotqa_reset_interval_ms
parameter. The default value is 1 second.
The quota reset interval is evaluated for every sampling interval, though. If
the sampling interval is tuned to be larger than 1 second, the problem Aveline
mentioned could happen.
But, I'm not sure if it could be a real problem. Reclaiming more than expected
is a definite problem that can degrade the system performance. Reclaiming less
than expected is less concerning, as long as the extent is not too much. It
doesn't regress something. Anyway this is a best effort proactive reclamation.
We could revisit this if it becomes clear some real users find it as a problem.
Thanks,
SJ
[...]
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2026-11-21 17:23 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 6:07 [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
2026-11-20 6:07 ` [RFC PATCH 1/4] mm/damon/reclaim: enable monitoring intervals auto-tune " SJ Park
2026-11-20 6:21 ` sashiko-bot
2026-11-20 6:07 ` [RFC PATCH 2/4] mm/damon/reclaim: set memory PSI 0.05% as default quota goal SJ Park
2026-11-20 6:13 ` sashiko-bot
2026-11-21 12:39 ` Aveline Noir
2026-11-21 17:23 ` SJ Park
2026-11-20 6:07 ` [RFC PATCH 3/4] mm/damon/reclaim: disable watermarks by default SJ Park
2026-11-20 6:11 ` sashiko-bot
2026-11-20 6:07 ` [RFC PATCH 4/4] Docs/admin-guide/mm/damon/reclaim: update for changed default parameters SJ Park
2026-11-20 6:10 ` sashiko-bot
2026-11-21 1:53 ` [RFC PATCH 0/4] mm/damon/reclaim: enable auto-tuning features by default SJ Park
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).