DM-Crypt Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Marc MERLIN <marc@merlins.org>
To: dm-crypt@saout.de, Arno Wagner <arno@wagner.name>
Subject: Re: [dm-crypt] aes-xts-plain with aes_x86_64 makes my SSD 5x slower than my encrypted HD
Date: Sun, 22 Jul 2012 23:28:51 -0700	[thread overview]
Message-ID: <20120723062850.GA6931@merlins.org> (raw)
In-Reply-To: <20120722214757.GA16793@tansi.org>

On Sun, Jul 22, 2012 at 11:47:57PM +0200, Arno Wagner wrote:
> On Sun, Jul 22, 2012 at 01:39:29PM -0700, Marc MERLIN wrote:
> > On Sun, Jul 22, 2012 at 09:47:32PM +0200, Yves-Alexis Perez wrote:
> > > > Any suggestions would be appreciated. 
> > > 
> > > I'm using Debian sid (so still at 3.2 kernel), currently using a 256G
> > > Samsung SSD. What I get is:
> 
> SID? That would be "unstable", whit possible assorted problems.
> 
> [...]
> > gandalfthegreat:~# dd if=/dev/mapper/ssdcrypt of=/dev/null bs=1M count=1024 
> > 1073741824 bytes (1.1 GB) copied, 44.3302 s, 24.2 MB/s
> > 
> > atop shows dd isn't really pegging a single core:
> > THR    SYSCPU   USRCPU     RDDSK   WRDSK   ST  EXC   S  CPUNR    CPU  CMD 
> >   1     0.60s    0.01s    226.2M      0K   --    -   D      3     6%  dd
> 
> It would not, as AES-NI (AFAIK) does need very little CPU
> assistance. AES-NI may be the problem though. Can you try with
> the normal AES module? I think unloading the AES-NI module 
> may be enough for that, but I am not sure. 
> 
> Maybe AES-NI needs very long for something it needs to do each 
> sector. Google("aes-ni slow") found at least some indications that
> aes-ni may still have problems.
  
It was worth a shot, thanks for the suggestion.

gandalfthegreat:~# lsmod | grep aes
aes_x86_64             16796  34 
gandalfthegreat:~# hdparm -t -T /dev/mapper/cryptroot

/dev/mapper/cryptroot:
 Timing cached reads:   15802 MB in  2.00 seconds = 7909.98 MB/sec
 Timing buffered disk reads:  68 MB in  3.04 seconds =  22.39 MB/sec
gandalfthegreat:~# 

Unfortunately, speed is exactly the same.

with aes_x86_64:
gandalfthegreat:/var/local/VirtualBox VMs/w2k_virtual# dd if=test of=/dev/null
4192640+0 records in
4192640+0 records out
2146631680 bytes (2.1 GB) copied, 12.4848 s, 172 MB/s

I then rebooted with aesni_intel and got this:
gandalfthegreat:/var/local/VirtualBox VMs/w2k_virtual# dd if=test of=/dev/null
4192640+0 records in
4192640+0 records out
2146631680 bytes (2.1 GB) copied, 8.42506 s, 255 MB/s

So those speeds are expected/believable, but I still don't know why
hdparm is so slow on /dev/mapper/cryptroot.

Mmmh....

Marc
-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/

  parent reply	other threads:[~2012-07-23  6:29 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-22 19:07 [dm-crypt] aes-xts-plain with aes_x86_64 makes my SSD 5x slower than my encrypted HD Marc MERLIN
2012-07-22 19:47 ` Yves-Alexis Perez
2012-07-22 20:39   ` Marc MERLIN
2012-07-22 21:47     ` Arno Wagner
2012-07-23  6:07       ` Yves-Alexis Perez
2012-07-23  6:28       ` Marc MERLIN [this message]
2012-07-23  8:14         ` Arno Wagner
2012-07-23 10:46           ` Milan Broz
2012-07-23 11:09             ` Yves-Alexis Perez
2012-07-23 11:37               ` Milan Broz
2012-07-23 15:08                 ` André Gall
2012-07-23 17:27                 ` André Gall
2012-07-24 14:06             ` Heinz Diehl
2012-07-24 14:16               ` Milan Broz
2012-07-23 16:12           ` Marc MERLIN
2012-07-23 16:19             ` Yves-Alexis Perez
2012-07-23 17:54               ` Marc MERLIN
2012-07-23 19:26                 ` Yves-Alexis Perez
2012-07-23 17:15             ` Milan Broz
2012-07-23 17:51               ` Marc MERLIN
2012-07-23 21:31                 ` Milan Broz
2012-07-24  5:57                   ` Marc MERLIN
2012-07-24  6:25                     ` Heinz Diehl
2012-07-24 15:02                       ` Marc MERLIN
2012-07-24 15:19                         ` Milan Broz
2012-07-24 16:09                           ` Marc MERLIN
2012-07-24 13:54                     ` Milan Broz
     [not found]                       ` <500E9099.8050501@redhat.com>
2012-07-24 14:27                       ` Heinz Diehl
2012-07-24 14:58                         ` Heinz Diehl
2012-07-24 15:38                           ` Marc MERLIN
2012-07-24 16:48                             ` Heinz Diehl
2012-07-24  6:11                   ` Heinz Diehl
2012-07-22 21:55     ` Marc MERLIN
2012-07-22 20:22 ` Heinz Diehl
2012-08-12 12:49 ` Pasi Kärkkäinen
2012-08-16  7:43   ` Marc MERLIN
     [not found]     ` <502D1F96.3080905@andregall.de>
2012-08-16 17:57       ` Marc MERLIN

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120723062850.GA6931@merlins.org \
    --to=marc@merlins.org \
    --cc=arno@wagner.name \
    --cc=dm-crypt@saout.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox