* Re: [dm-crypt] dm-crypt Digest, Vol 32, Issue 12
2012-02-09 19:33 ` [dm-crypt] dm-crypt Digest, Vol 32, Issue 12 FAN ZHANG
@ 2012-02-09 19:44 ` Hari Prasad
2012-02-09 21:18 ` [dm-crypt] proc/crypto & hw (was Re: dm-crypt Digest, Vol 32, Issue 12) Milan Broz
0 siblings, 1 reply; 3+ messages in thread
From: Hari Prasad @ 2012-02-09 19:44 UTC (permalink / raw)
To: FAN ZHANG; +Cc: dm-crypt@saout.de
[-- Attachment #1.1: Type: text/plain, Size: 61366 bytes --]
Hi Fan,
Not all algos are mapped, to get more info about the mapping I have
attached the cat file. Please comment on this..
Thanks,
Hari
On Thu, Feb 9, 2012 at 11:33 AM, FAN ZHANG <fzhangcsc@yahoo.com> wrote:
> Hari:
>
> It seems that either chainmode or cipher requested by dm-crypt does not
> match what is registered in crypto driver.
>
> What are chainmode and cipher for device encption in your test?
>
>
> Thanks
>
> Fan
>
> *From:* "dm-crypt-request@saout.de" <dm-crypt-request@saout.de>
> *To:* dm-crypt@saout.de
> *Sent:* Thursday, February 9, 2012 1:22 PM
> *Subject:* dm-crypt Digest, Vol 32, Issue 12
>
> Send dm-crypt mailing list submissions to
> dm-crypt@saout.de
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://www.saout.de/mailman/listinfo/dm-crypt
> or, via email, send a message with subject or body 'help' to
> dm-crypt-request@saout.de
>
> You can reach the person managing the list at
> dm-crypt-owner@saout.de
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of dm-crypt digest..."
>
>
> Today's Topics:
>
> 1. Re: dm-crypt Digest, Vol 32, Issue 8 (Hari Prasad)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 9 Feb 2012 10:34:52 -0800
> From: Hari Prasad <hariprasad2006@gmail.com>
> To: FAN ZHANG <fzhangcsc@yahoo.com>
> Cc: "dm-crypt@saout.de" <dm-crypt@saout.de>
> Subject: Re: [dm-crypt] dm-crypt Digest, Vol 32, Issue 8
> Message-ID:
> <CABOOXR60kk_MJhnTz7_homh4Wty7bbySnKvV82ySW5C4FgMjZQ@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Thanks Fan. Yes, I did follow all the steps you mentioned, I could see our
> implementation in 'proc/crypto' as well, even then I don't see our function
> calls being called. Clueless right now... Any pointers or degugging
> suggestions would greatly help!
>
> Thanks,
> Hari
>
> On Wed, Feb 8, 2012 at 12:02 PM, FAN ZHANG <fzhangcsc@yahoo.com> wrote:
>
> > Hi Hari :
> >
> >
> >
> > 1. As I know ICS does not use cryptsetup to creat dm-crypt map target.
> Are
> > you sure that the mapper was created successfully in your device?******
> > ****
> > 2. Did you call crypto_register_alg() to regist crypt algorithms in crypt
> > driver?****
> > ****
> > 3. Also, which storage device do you want to encrypt?****
> > ** **
> >
> >
> >
> > Thanks
> >
> > Fan
> >
> >
> >
> >
> >
> > From: "dm-crypt-request@saout.de" <dm-crypt-request@saout.de>
> > *To:* dm-crypt@saout.de
> > *Sent:* Wednesday, February 8, 2012 1:29 PM
> > *Subject:* dm-crypt Digest, Vol 32, Issue 8
> >
> >
> > Send dm-crypt mailing list submissions to
> > dm-crypt@saout.de
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://www.saout.de/mailman/listinfo/dm-crypt
> > or, via email, send a message with subject or body 'help' to
> > dm-crypt-request@saout.de
> >
> > You can reach the person managing the list at
> > dm-crypt-owner@saout.de
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of dm-crypt digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Inquiry from Qualcomm on DM_CRYPT for Android ICS (Hari Prasad)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Wed, 8 Feb 2012 11:21:57 -0800
> > From: Hari Prasad <hariprasad2006@gmail.com>
> > To: dm-crypt@saout.de
> > Subject: [dm-crypt] Inquiry from Qualcomm on DM_CRYPT for Android ICS
> > Message-ID:
> > <CABOOXR4ssxieoRpf3gxkyMXQ-EcHcRYEPgc6kmpPGTWc6CwwKQ@mail.gmail.com>
> > Content-Type: text/plain; charset="iso-8859-1"
> >
> > Hi there,
> >
> > MY name is Hari, I work for Crypto SW team at Qualcomm Inc. We are using
> > our Crypto HW to do all the necessary encryption & decryption. We are
> > trying to use this DM-CRYPT in our setup, I am not sure how the HW device
> > is mapped using DM_CRYPT, I don't see any of our code being called for HW
> > when I run an encryption test (ENCRYPT PHONE in ICS Android build).
> >
> > I have attached the log (printk added in DM_CRYPT), I see that the device
> > crashes or something happens (device disappears after few seconds of
> > starting the ENCRYPT_PHONE).
> >
> > We register our HW through misc_register function call.
> >
> > It would be really helpful if I can get the solution to map our HW device
> > using DM-CRYPT.
> >
> > 1. Is there any module or any file that I can look up to find any info
> > about the devices being mapped?
> > 2. Is there a way I can put a breakpoint or add some prink statements in
> > some module which outputs this info (in runtime)?
> >
> > Thanks,
> > Hari
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://www.saout.de/pipermail/dm-crypt/attachments/20120208/d575eafa/attachment.html
> > >
> > -------------- next part --------------
> > 1 <6>[ 0.000000] Booting Linux on physical CPU 0
> >
> > 2 <6>[ 0.000000] Initializing cgroup subsys cpu
> >
> > 3 <5>[ 0.000000] Linux version 3.0.8-00006-g7e7c91b-dirty
> > (hnamgund@rameshm2-linux) (gcc version 4.4.3 (GCC) ) #4 SMP PREEMPT Tue
> > Feb 7 17:30:41 PST 2012
> >
> > 4 <4>[ 0.000000] CPU: ARMv7 Processor [510f04d2] revision 2
> > (ARMv7), cr=10c5387d
> >
> > 5 <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT
> > nonaliasing instruction cache
> >
> > 6 <4>[ 0.000000] Machine: QCT MSM8960 FLUID
> >
> > 7 <6>[ 0.000000] low unstable address b0000000 max size 10000000
> > bank size 20000000
> >
> > 8 <6>[ 0.000000] movable zone start b0000000 size 10000000
> >
> > 9 <6>[ 0.000000] memory pool 3 (start a5500000 size ab00000)
> > initialized
> >
> > 10 <4>[ 0.000000] Memory policy: ECC disabled, Data cache
> > writealloc
> >
> > 11 <6>[ 0.000000] socinfo_init: v6, id=87, ver=2.0, raw_id=1712,
> > raw_ver=2, hw_plat=3, hw_plat_ver=65536
> >
> > 12 <6>[ 0.000000] accessory_chip=0 hw_plat_subtype=0
> >
> > 13 <4>[ 0.000000] Zone PFN ranges:
> >
> > 14 <4>[ 0.000000] Normal 0x00080200 -> 0x000a1200
> >
> > 15 <4>[ 0.000000] HighMem 0x000a1200 -> 0x000c0000
> >
> > 16 <4>[ 0.000000] Movable zone start PFN for each node
> >
> > 17 <4>[ 0.000000] Node 0: 677888
> >
> > 18 <4>[ 0.000000] early_node_map[3] active PFN ranges
> >
> > 19 <4>[ 0.000000] 0: 0x00080200 -> 0x00088f00
> >
> > 20 <4>[ 0.000000] 0: 0x00090000 -> 0x000a5500
> >
> > 21 <4>[ 0.000000] 0: 0x000b0000 -> 0x000c0000
> >
> > 22 <7>[ 0.000000] On node 0 totalpages: 188928
> >
> > 23 <7>[ 0.000000] Normal zone: 1056 pages used for memmap
> >
> > 24 <7>[ 0.000000] Normal zone: 0 pages reserved
> >
> > 25 <7>[ 0.000000] Normal zone: 105184 pages, LIFO batch:31
> >
> > 26 <7>[ 0.000000] HighMem zone: 140 pages used for memmap
> >
> > 27 <7>[ 0.000000] HighMem zone: 17012 pages, LIFO batch:3
> >
> > 28 <7>[ 0.000000] Movable zone: 848 pages used for memmap
> >
> > 29 <7>[ 0.000000] Movable zone: 64688 pages, LIFO batch:15
> >
> > 30 <6>[ 0.000000] allocating 31825920 bytes at c163b000
> > (8183b000 physical) for fb
> >
> > 31 <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c3498000 s9344
> > r8192 d15232 u32768
> >
> > 32 <7>[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768
> > alloc=8*4096
> >
> > 33 <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
> >
> > 34 <4>[ 0.000000] Built 1 zonelists in Zone order, mobility
> > grouping on. Total pages: 186884
> >
> > 35 <5>[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8
> > androidboot.hardware=qcom user_debug=31 androidboot.emmc=true
> > androidboot.serialno=230b3a0f androidboot.baseband=msm
> >
> > 36 <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192
> > bytes)
> >
> > 37 <6>[ 0.000000] Dentry cache hash table entries: 65536 (order:
> > 6, 262144 bytes)
> >
> > 38 <6>[ 0.000000] Inode-cache hash table entries: 32768 (order:
> > 5, 131072 bytes)
> >
> > 39 <6>[ 0.000000] Memory: 141MB 341MB 256MB = 738MB total
> >
> > 40 <5>[ 0.000000] Memory: 702264k/702264k available, 228552k
> > reserved, 330752K highmem
> >
> > 41 <5>[ 0.000000] Virtual kernel memory layout:
> >
> > 42 <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
> >
> > 43 <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896
> kB)
> >
> > 44 <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
> >
> > 45 <5>[ 0.000000] vmalloc : 0xda000000 - 0xfa000000 ( 512
> MB)
> >
> > 46 <5>[ 0.000000] lowmem : 0xc0000000 - 0xd9f00000 ( 415
> MB)
> >
> > 47 <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
> >
> > 48 <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14
> MB)
> >
> > 49 <5>[ 0.000000] .init : 0xc0008000 - 0xc0053000 ( 300
> kB)
> >
> > 50 <5>[ 0.000000] .text : 0xc0100000 - 0xc0a78c98 (9700
> kB)
> >
> > 51 <5>[ 0.000000] .data : 0xc0b00000 - 0xc0be9e78 ( 936
> kB)
> >
> > 52 <5>[ 0.000000] .bss : 0xc0be9e9c - 0xc0dda190 (1985
> > kB)
> >
> > 53 <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3,
> > MinObjects=0, CPUs=2, Nodes=1
> >
> > 54 <6>[ 0.000000] Preemptible hierarchical RCU implementation.
> >
> > 55 <6>[ 0.000000] NR_IRQS:817
> >
> > 56 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution
> > 30520ns, wraps every 131084001ms
> >
> > 57 <6>[ 0.000000] Console: colour dummy device 80x30
> >
> > 58 <6>[ 0.150160] Calibrating delay using timer specific
> > routine.. 13.53 BogoMIPS (lpj=67673)
> >
> > 59 <6>[ 0.150190] pid_max: default: 32768 minimum: 301
> >
> > 60 <6>[ 0.150556] Mount-cache hash table entries: 512
> >
> > 61 <6>[ 0.151564] Initializing cgroup subsys debug
> >
> > 62 <6>[ 0.151594] Initializing cgroup subsys cpuacct
> >
> > 63 <6>[ 0.151655] Initializing cgroup subsys freezer
> >
> > 64 <6>[ 0.151716] CPU: Testing write buffer coherency: ok
> >
> > 65 <6>[ 0.152021] hw perfevents: enabled with ARMv7 Krait PMU
> > driver, 5 counters available
> >
> > 66 <6>[ 0.260399] Brought up 2 CPUs
> >
> > 67 <6>[ 0.260430] SMP: Total of 2 processors activated (27.06
> > BogoMIPS).
> >
> > 68 <6>[ 0.275995] print_constraints: dummy:
> >
> > 69 <3>[ 0.276087] rdev_init_debugfs: Error-Bad Function Input
> >
> > 70 <6>[ 0.276331] NET: Registered protocol family 16
> >
> > 71 <3>[ 0.276514] AXI: msm_bus_fabric_init_driver():
> > msm_bus_fabric_init_driver
> >
> > 72 <6>[ 0.278040] meminfo_init: smem ram ptable found: ver: 0
> > len: 5
> >
> > 73 <6>[ 0.278071] Found 1 memory banks grouped into 8 memory
> > regions
> >
> > 74 <4>[ 0.278101] ------------[ cut here ]------------
> >
> > 75 <4>[ 0.278132] WARNING: at
> >
> /local/mnt2/workspace2/8960_file_enc_decr_2/kernel/drivers/thermal/msm8960_tsens.c:729
> > msm_tsens_early_init+0x1e8/0x388()
> >
> > 76 <4>[ 0.278132] tsens_calib_sensors8960: No temperature
> > sensor:0 data for calibration in QFPROM!
> >
> > 77 <4>[ 0.278162] Modules linked in:
> >
> > 78 <4>[ 0.278193] [<c010c5d4>] (unwind_backtrace+0x0/0x12c) from
> > [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> >
> > 79 <4>[ 0.278223] [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> > from [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
> >
> > 80 <4>[ 0.278254] [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
> > from [<c055319c>] (msm_tsens_early_init+0x1e8/0x388)
> >
> > 81 <4>[ 0.278284] [<c055319c>]
> > (msm_tsens_early_init+0x1e8/0x388) from [<c0014eac>]
> > (msm8960_cdp_init+0x28/0x4f8)
> >
> > 82 <4>[ 0.278345] [<c0014eac>] (msm8960_cdp_init+0x28/0x4f8)
> > from [<c000b444>] (customize_machine+0x1c/0x28)
> >
> > 83 <4>[ 0.278376] [<c000b444>] (customize_machine+0x1c/0x28)
> > from [<c0100520>] (do_one_initcall+0x94/0x164)
> >
> > 84 <4>[ 0.278406] [<c0100520>] (do_one_initcall+0x94/0x164) from
> > [<c000834c>] (kernel_init+0x88/0x130)
> >
> > 85 <4>[ 0.278437] [<c000834c>] (kernel_init+0x88/0x130) from
> > [<c0106f60>] (kernel_thread_exit+0x0/0x8)
> >
> > 86 <4>[ 0.278467] ---[ end trace da227214a82491b7 ]---
> >
> > 87 <6>[ 0.278498] msm_rpm_init: RPM firmware 3.0.16842823
> >
> > 88 <6>[ 0.297848] rcg_clk_handoff: sdc1_clk rate=48000000
> >
> > 89 <6>[ 0.297909] rcg_clk_handoff: mdp_clk rate=200000000
> >
> > 90 <6>[ 0.300289] saw_probe: id=0, name=8921_s5
> >
> > 91 <6>[ 0.300686] saw_probe: id=1, name=8921_s6
> >
> > 92 <6>[ 0.301022] gpio_vreg_probe: id=202, name=ext_5v,
> > gpio=202, gpio_label=ext_5v_en
> >
> > 93 <6>[ 0.301327] pm8921_probe: PMIC revision 1: F3
> >
> > 94 <6>[ 0.301327] pm8921_probe: PMIC revision 2: 06
> >
> > 95 <6>[ 0.301358] pm8921_probe: PMIC version: PM8921 rev 2.0
> >
> > 96 <6>[ 0.301358] pm8921_probe: PMIC Restart Reason: Triggered
> > from CHG (usb charger insertion)
> >
> > 97 <6>[ 0.302914] pm_gpio_probe: OK: base=152, ngpio=44
> >
> > 98 <6>[ 0.303219] pm8xxx_mpp_probe: OK: base=196, ngpio=12
> >
> > 99 <6>[ 0.308011] gpio_vreg_probe: id=193, name=ext_otg_sw,
> > gpio=193, gpio_label=ext_otg_sw_en
> >
> > 100 <6>[ 0.319975] select_freq_plan: ACPU PVS: Slow
> >
> > 101 <6>[ 0.320006] select_freq_plan: Max ACPU freq: 918000 KHz
> >
> > 102 <6>[ 0.323454] cpufreq_table_init: CPU0: 11 scaling
> > frequencies supported.
> >
> > 103 <6>[ 0.323454] cpufreq_table_init: CPU1: 11 scaling
> > frequencies supported.
> >
> > 104 <6>[ 0.330474] sps:REVISION of BAM 0xda020000 is 0x5.
> >
> > 105 <6>[ 0.331084] sps is ready.
> >
> > 106 <6>[ 0.354646] bio: create slab <bio-0> at 0
> >
> > 107 <6>[ 0.355318] ION heap vmalloc created
> >
> > 108 <6>[ 0.355379] ION heap sf created at acf00000 with size
> > 2800000
> >
> > 109 <6>[ 0.355409] ION heap mm created at a5700000 with size
> > 7800000
> >
> > 110 <6>[ 0.355409] ION heap mm_fw created at a5500000 with size
> > 200000
> >
> > 111 <6>[ 0.355501] ION heap mfc created at af700000 with size 2000
> >
> > 112 <6>[ 0.355501] ION heap iommu created
> >
> > 113 <6>[ 0.355562] ION heap qsecom created at af702000 with size
> > 100000
> >
> > 114 <6>[ 0.355623] ION heap audio created at af802000 with size
> > 2b4000
> >
> > 115 <5>[ 0.356203] pm8xxx_pwm_probe: OK
> >
> > 116 <5>[ 0.356630] SCSI subsystem initialized
> >
> > 117 <6>[ 0.356752] sps:REVISION of BAM 0xda02c000 is 0x12.
> >
> > 118 <6>[ 0.357759] usbcore: registered new interface driver usbfs
> >
> > 119 <6>[ 0.357881] usbcore: registered new interface driver hub
> >
> > 120 <6>[ 0.357973] usbcore: registered new device driver usb
> >
> > 121 <7>[ 0.358522] Registered led device: led:battery_charging
> >
> > 122 <7>[ 0.359255] Registered led device: led:battery_full
> >
> > 123 <6>[ 0.359468] Advanced Linux Sound Architecture Driver
> > Version 1.0.24.
> >
> > 124 <6>[ 0.360018] Bluetooth: Core ver 2.16
> >
> > 125 <6>[ 0.360079] NET: Registered protocol family 31
> >
> > 126 <6>[ 0.360109] Bluetooth: HCI device and connection manager
> > initialized
> >
> > 127 <6>[ 0.360109] Bluetooth: HCI socket layer initialized
> >
> > 128 <6>[ 0.360109] Bluetooth: L2CAP socket layer initialized
> >
> > 129 <6>[ 0.360292] Bluetooth: SCO socket layer initialized
> >
> > 130 <6>[ 0.360781] cfg80211: Calling CRDA to update world
> > regulatory domain
> >
> > 131 <6>[ 0.361025] Switching to clocksource gp_timer
> >
> > 132 <6>[ 0.380283] NET: Registered protocol family 2
> >
> > 133 <6>[ 0.380466] IP route cache hash table entries: 16384
> > (order: 4, 65536 bytes)
> >
> > 134 <6>[ 0.380924] TCP established hash table entries: 65536
> > (order: 7, 524288 bytes)
> >
> > 135 <6>[ 0.382084] TCP bind hash table entries: 65536 (order: 7,
> > 786432 bytes)
> >
> > 136 <6>[ 0.383549] TCP: Hash tables configured (established 65536
> > bind 65536)
> >
> > 137 <6>[ 0.383549] TCP reno registered
> >
> > 138 <6>[ 0.383580] UDP hash table entries: 256 (order: 1, 8192
> > bytes)
> >
> > 139 <6>[ 0.383610] UDP-Lite hash table entries: 256 (order: 1,
> > 8192 bytes)
> >
> > 140 <6>[ 0.384129] NET: Registered protocol family 1
> >
> > 141 <6>[ 0.384465] RPC: Registered named UNIX socket transport
> > module.
> >
> > 142 <6>[ 0.384495] RPC: Registered udp transport module.
> >
> > 143 <6>[ 0.384495] RPC: Registered tcp transport module.
> >
> > 144 <6>[ 0.384526] RPC: Registered tcp NFSv4.1 backchannel
> > transport module.
> >
> > 145 <6>[ 0.384709] Trying to unpack rootfs image as initramfs...
> >
> > 146 <6>[ 0.397100] Freeing initrd memory: 164K
> >
> > 147 <6>[ 0.397344] PMU: registered new PMU device of type 0
> >
> > 148 <6>[ 0.397527] PMU: registered new PMU device of type 1
> >
> > 149 <6>[ 0.399633] msm_ptm msm_ptm.0: PTM intialized.
> >
> > 150 <6>[ 0.400732] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
> >
> > 151 <6>[ 0.401770] pil_qdsp6v4 pil_qdsp6v4.1: using secure boot
> >
> > 152 <6>[ 0.402777] pil_qdsp6v4 pil_qdsp6v4.2: using secure boot
> >
> > 153 <6>[ 0.404028] pil_riva pil_riva: using secure boot
> >
> > 154 <3>[ 0.405585] smd_channel_probe_worker: allocation table not
> > initialized
> >
> > 155 <6>[ 0.410987] msm_dsps driver version 3.02.
> >
> > 156 <6>[ 0.411872] NET: Registered protocol family 27
> >
> > 157 <6>[ 0.412452] dspcrashd_probe: Platform driver values: Base =
> > 0x8da00000, Size = 0x1800000,pdata = 0xdeaddead
> >
> > 158 <6>[ 0.413520] usf_init: USF SW version 1.1.1.
> >
> > 159 <6>[ 0.413520] usf_init: Max 1 devs registration
> >
> > 160 <6>[ 0.414649] modem_8960_init: modem fatal driver init'ed.
> >
> > 161 <6>[ 0.414832] lpass_fatal_init: lpass SSR driver init'ed.
> >
> > 162 <6>[ 0.414985] wcnss_8960: module initialized
> >
> > 163 <5>[ 0.415351] msm_rpm_log_probe: OK
> >
> > 164 <4>[ 0.596001] highmem bounce pool size: 64 pages
> >
> > 165 <6>[ 0.596276] ashmem: initialized
> >
> > 166 <6>[ 0.607294] fuse init (API version 7.16)
> >
> > 167 <6>[ 0.607691] msgmni has been set to 725
> >
> > 168 <6>[ 0.609369] Block layer SCSI generic (bsg) driver version
> > 0.4 loaded (major 248)
> >
> > 169 <6>[ 0.609369] io scheduler noop registered
> >
> > 170 <6>[ 0.609400] io scheduler deadline registered
> >
> > 171 <6>[ 0.609491] io scheduler cfq registered (default)
> >
> > 172 <6>[ 0.613306] mipi_dsi base phy_addr = 0x4700000 virt =
> > 0xda400000
> >
> > 173 <6>[ 0.613337] mmss_sfpb base phy_addr = 0x5700000,virt =
> > 0xda056000
> >
> > 174 <4>[ 0.613551] msm_fb_detect_panel: not supported
> > 'mipi_video_toshiba_wvga'
> >
> > 175 <6>[ 0.614008] setting pdata->panel_info.fb_num to 3. type: 8
> >
> > 176 <6>[ 0.629909] FrameBuffer[0] 600x1024 size=7471104 bytes is
> > registered successfully!
> >
> > 177 <7>[ 0.630215] Registered led device: lcd-backlight
> >
> > 178 <4>[ 0.630276] msm_fb_detect_panel: not supported
> > 'mipi_video_novatek_qhd'
> >
> > 179 <4>[ 0.630306] msm_fb_detect_panel: not supported
> > 'mipi_cmd_novatek_qhd'
> >
> > 180 <4>[ 0.630306] msm_fb_detect_panel: not supported
> > 'mipi_video_renesas_fwvga'
> >
> > 181 <4>[ 0.630337] msm_fb_detect_panel: not supported
> > 'mipi_cmd_renesas_fwvga'
> >
> > 182 <4>[ 0.630337] msm_fb_detect_panel: not supported
> > 'mipi_video_chimei_wxga'
> >
> > 183 <4>[ 0.630367] msm_fb_detect_panel: not supported
> > 'mipi_video_truly_wvga'
> >
> > 184 <4>[ 0.631100] hdmi_msm hdmi_msm.1: WARNING: HDCP disabled
> >
> > 185 <6>[ 0.631191] setting pdata->panel_info.fb_num to 1. type: 7
> >
> > 186 <6>[ 0.640347] FrameBuffer[1] 1920x1080 size=4149248 bytes is
> > registered successfully!
> >
> > 187 <3>[ 0.640622] hdmi_msm hdmi_msm.1:
> > external_common_state_create: sysfs group d9148808
> >
> > 188 <6>[ 0.640683] hdmi_msm hdmi_msm.1: HDMI HPD: ON
> >
> > 189 <3>[ 0.751350] Video format is : 15
> >
> > 190 <6>[ 0.751991] setting pdata->panel_info.fb_num to 1. type: 10
> >
> > 191 <3>[ 0.752205] Inside writeback_driver_init
> >
> > 192 <3>[ 0.752357] Inside writeback_probe
> >
> > 193 <3>[ 0.752571] mdp_probe: writeback panel not supprted
> >
> > 194 <6>[ 0.753517]
> >
> > 195 <6>[ 0.753547] msm_vidc_enc: Inside vid_enc_init()
> >
> > 196 <6>[ 0.753731]
> >
> > 197 <6>[ 0.753761] msm_vidc_enc: Inside vid_enc_vcd_init()
> >
> > 198 <6>[ 0.754188] msm_serial: driver initialized
> >
> > 199 <6>[ 0.754402] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq
> > = 188) is a MSM HS UART
> >
> > 200 <6>[ 0.801495] msm_serial_hs module loaded
> >
> > 201 <6>[ 0.801587] msm_serial_hsl: detected port #0
> >
> > 202 <6>[ 0.801648] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16440000
> > (irq = 186) is a MSM
> >
> > 203 <6>[ 0.801709] msm_serial_hsl: console setup on port #0
> >
> > 204 <6>[ 1.860613] console [ttyHSL0] enabled
> >
> > 205 <6>[ 1.952205] msm_serial_hsl: driver initialized
> >
> > 206 <6>[ 1.957057] msm_rotator: invalid HW version
> >
> > 207 <6>[ 1.974881] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set
> > for device is GPUMMU
> >
> > 208 <6>[ 1.982023] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set
> > for device is GPUMMU
> >
> > 209 <6>[ 1.989043] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set
> > for device is GPUMMU
> >
> > 210 <6>[ 2.002594] brd: module loaded
> >
> > 211 <6>[ 2.007904] loop: module loaded
> >
> > 212 <6>[ 2.010163] pmem: Initializing pmem_audio (user-space) as
> > non-cached
> >
> > 213 <6>[ 2.016542] allocating 2834432 bytes at (null) (afab6000
> > physical) for pmem_audio
> >
> > 214 <4>[ 2.024233] i2c-core: driver [isa1200] using legacy suspend
> > method
> >
> > 215 <4>[ 2.030154] i2c-core: driver [isa1200] using legacy resume
> > method
> >
> > 216 <6>[ 2.036746] tabla-slim tabla-slim: Initialized slim device
> > tabla-slim
> >
> > 217 <6>[ 2.137982] tabla2x-slim tabla2x-slim: Initialized slim
> > device tabla2x-slim
> >
> > 218 <7>[ 2.145673] gpio_request: gpio-185 (CDC_RESET) status -16
> >
> > 219 <3>[ 2.145673] tabla_reset: Failed to request gpio 185
> >
> > 220 <3>[ 2.149519] tabla_slim_probe: Resetting Tabla failed
> >
> > 221 <4>[ 2.156722] tabla2x-slim: probe of tabla2x-slim failed with
> > error -16
> >
> > 222 <6>[ 2.163375] SCSI Media Changer driver v0.25
> >
> > 223 <6>[ 2.167648] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic
> > channels, max=256) (6 bit encapsulation enabled).
> >
> > 224 <6>[ 2.176316] CSLIP: code copyright 1989 Regents of the
> > University of California.
> >
> > 225 <6>[ 2.184648] usbcore: registered new interface driver asix
> >
> > 226 <6>[ 2.189073] usbcore: registered new interface driver
> > cdc_ether
> >
> > 227 <6>[ 2.194903] usbcore: registered new interface driver
> net1080
> >
> > 228 <6>[ 2.200518] usbcore: registered new interface driver
> > cdc_subset
> >
> > 229 <6>[ 2.206439] usbcore: registered new interface driver zaurus
> >
> > 230 <6>[ 2.211963] cdc_ncm: 04-Aug-2011
> >
> > 231 <6>[ 2.215199] usbcore: registered new interface driver
> cdc_ncm
> >
> > 232 <6>[ 2.220845] usbcore: registered new interface driver
> > rmnet_usb
> >
> > 233 <6>[ 2.227163] rmnet usb ctrl Initialized.
> >
> > 234 <6>[ 2.230489] wcnss_wlan probed in built-in mode
> >
> > 235 <6>[ 2.235251] rmnet_init: BAM devices[8]
> >
> > 236 <6>[ 2.243125] msm_otg msm_otg: msm_otg probe
> >
> > 237 <6>[ 2.246238] msm_otg msm_otg: OTG regs = da0b8000
> >
> > 238 <6>[ 2.252800] ehci_hcd: USB 2.0 'Enhanced' Host Controller
> > (EHCI) Driver
> >
> > 239 <6>[ 2.258812] usbcore: registered new interface driver
> cdc_acm
> >
> > 240 <6>[ 2.263970] cdc_acm: USB Abstract Control Model driver for
> > USB modems and ISDN adapters
> >
> > 241 <6>[ 2.271936] Initializing USB Mass Storage driver...
> >
> > 242 <6>[ 2.276850] usbcore: registered new interface driver
> > usb-storage
> >
> > 243 <6>[ 2.282801] USB Mass Storage support registered.
> >
> > 244 <6>[ 2.287440] usbcore: registered new interface driver
> > ums-alauda
> >
> > 245 <6>[ 2.293361] usbcore: registered new interface driver
> > ums-cypress
> >
> > 246 <6>[ 2.299313] usbcore: registered new interface driver
> > ums-datafab
> >
> > 247 <6>[ 2.305325] usbcore: registered new interface driver
> > ums-freecom
> >
> > 248 <6>[ 2.311307] usbcore: registered new interface driver
> > ums-isd200
> >
> > 249 <6>[ 2.317228] usbcore: registered new interface driver
> > ums-jumpshot
> >
> > 250 <6>[ 2.323302] usbcore: registered new interface driver
> > ums-karma
> >
> > 251 <6>[ 2.329101] usbcore: registered new interface driver
> > ums-onetouch
> >
> > 252 <6>[ 2.335205] usbcore: registered new interface driver
> > ums-sddr09
> >
> > 253 <6>[ 2.341065] usbcore: registered new interface driver
> > ums-sddr55
> >
> > 254 <6>[ 2.347016] usbcore: registered new interface driver
> > ums-usbat
> >
> > 255 <6>[ 2.352907] usbcore: registered new interface driver
> > usbserial
> >
> > 256 <6>[ 2.358553] usbserial: USB Serial Driver core
> >
> > 257 <6>[ 2.362948] USB Serial support registered for Qualcomm USB
> > modem
> >
> > 258 <6>[ 2.368960] usbcore: registered new interface driver
> > qcserial
> >
> > 259 <6>[ 2.374698] usbcore: registered new interface driver
> > usb_ehset_test
> >
> > 260 <6>[ 2.380924] usbcore: registered new interface driver
> > diag_bridge
> >
> > 261 <6>[ 2.386967] usbcore: registered new interface driver
> > mdm_bridge
> >
> > 262 <6>[ 2.393651] msm_hsusb msm_hsusb: [usb_gadget_probe_driver]
> > hw_ep_max = 32
> >
> > 263 <6>[ 2.401556] android_usb gadget: Mass Storage Function,
> > version: 2009/09/11
> >
> > 264 <6>[ 2.407446] android_usb gadget: Number of LUNs=1
> >
> > 265 <6>[ 2.411994] lun0: LUN: removable file: (no medium)
> >
> > 266 <6>[ 2.417060] android_usb gadget: android_usb ready
> >
> > 267 <6>[ 2.421547] msm_otg msm_otg: phy_reset: success
> >
> > 268 <6>[ 2.427620] diagchar initialized now
> >
> > 269 <6>[ 2.430215] mousedev: PS/2 mouse device common for all mice
> >
> > 270 <6>[ 2.436807] input: keypad_8960 as
> > /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input0
> >
> > 271 <6>[ 2.445627] usbcore: registered new interface driver xpad
> >
> > 272 <6>[ 2.450419] cyttsp_init:Cypress TrueTouch(R) Standard
> > Product
> >
> > 273 <6>[ 2.456126] cyttsp_init:I2C Touchscreen Driver (Built Feb
> > 2 2012 @ 19:30:14)
> >
> > 274 <6>[ 2.463268] cyttsp_probe:Start Probe 1.2
> >
> > 275 <6>[ 2.467144] cyttsp_initialize:cyttsp-i2c: Register input
> > device
> >
> > 276 <6>[ 2.473248] input: cyttsp-i2c as
> > /devices/i2c-3/3-0024/input/input1
> >
> > 277 <6>[ 2.585319] cyttsp_power_on:BL101: f=01 s=11 err=D0 bl=010B
> > bld=010B R=16
> >
> > 278 <6>[ 2.591088] cyttsp_power_on:BL102: tver=14DC a_id=A009
> > aver=0200
> >
> > 279 <6>[ 2.597100] cyttsp_power_on:BL103: c_id=C0C1C2
> >
> > 280 <6>[ 2.812726] cyttsp_power_on:BL104: f=04 s=00 err=00bl=0000
> > bld=0000
> >
> > 281 <6>[ 2.925011] cyttsp_power_on:SI102: tver=0000 a_id=0000
> > aver=0000
> >
> > 282 <6>[ 2.929955] cyttsp_power_on:SI103: c_id=000000
> >
> > 283 <6>[ 3.061773] cyttsp_initialize:Setting up interrupt
> >
> > 284 <6>[ 3.065710] cyttsp_initialize:cyttsp-i2c: Successful
> > registration
> >
> > 285 <6>[ 3.071600] cyttsp_probe:Start Probe PASS
> >
> > 286 <6>[ 3.075965] input: pmic8xxx_pwrkey as
> > /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input2
> >
> > 287 <6>[ 3.086677] using rtc device, pm8xxx_rtc, for alarms
> >
> > 288 <6>[ 3.090462] rtc-pm8xxx rtc-pm8xxx: rtc core: registered
> > pm8xxx_rtc as rtc0
> >
> > 289 <6>[ 3.097787] i2c /dev entries driver
> >
> > 290 <6>[ 3.101480] lirc_dev: IR Remote Control driver registered,
> > major 237
> >
> > 291 <6>[ 3.107401] IR NEC protocol handler initialized
> >
> > 292 <6>[ 3.111918] IR RC5(x) protocol handler initialized
> >
> > 293 <6>[ 3.116648] IR RC6 protocol handler initialized
> >
> > 294 <6>[ 3.121165] IR JVC protocol handler initialized
> >
> > 295 <6>[ 3.125713] IR Sony protocol handler initialized
> >
> > 296 <6>[ 3.130291] IR RC5 (streamzap) protocol handler initialized
> >
> > 297 <6>[ 3.135968] IR LIRC bridge handler initialized
> >
> > 298 <6>[ 3.140302] Linux video capture interface: v2.00
> >
> > 299 <6>[ 3.145032] usbcore: registered new interface driver
> > uvcvideo
> >
> > 300 <6>[ 3.150587] USB Video Class driver (v1.1.0)
> >
> > 301 <3>[ 3.178788] qup_i2c qup_i2c.4: QUP: I2C status flags
> > :0x1363c8, irq:185
> >
> > 302 <3>[ 3.184373] qup_i2c qup_i2c.4: I2C slave addr:0x48 not
> > connected
> >
> > 303 <4>[ 3.192156] mt9m114: probe of 4-0048 failed with error -107
> >
> > 304 <6>[ 3.211170] tsens_tm_init : TSENS early init not done.
> >
> > 305 <6>[ 3.235006] pm8xxx_tm_probe: OK
> >
> > 306 <6>[ 3.238211] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> > initialised: dm-devel@redhat.com
> >
> > 307 <4>[ 3.245627] dm_crypt_init: dm_crypt: entering
> >
> > 308 <6>[ 3.250389] cpuidle: using governor ladder
> >
> > 309 <6>[ 3.254143] cpuidle: using governor menu
> >
> > 310 <6>[ 3.258415] mmc0: mci-version: 18
> >
> > 311 <6>[ 3.261406] mmc0: bam physical base=0x12402000
> >
> > 312 <6>[ 3.265771] mmc0: bam virtual base=0xda0cc000
> >
> > 313 <6>[ 3.270105] mmc0: BAM device registered.
> > bam_handle=0xd928c400
> >
> > 314 <6>[ 3.275965] sps:REVISION of BAM 0xda0cc000 is 0x5.
> >
> > 315 <6>[ 3.281275] mmc0: Qualcomm MSM SDCC-BAM at
> > 0x0000000012402000 irq 130
> >
> > 316 <6>[ 3.287166] mmc0: Qualcomm MSM SDCC-DML at
> > 0x0000000012400800
> >
> > 317 <3>[ 3.292904] mmc0: No card detect facilities available
> >
> > 318 <6>[ 3.298153] mmc0: Qualcomm MSM SDCC-core at
> > 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
> >
> > 319 <6>[ 3.306271] mmc0: 8 bit data mode enabled
> >
> > 320 <6>[ 3.310361] mmc0: 4 bit data mode disabled
> >
> > 321 <6>[ 3.314298] mmc0: polling status mode disabled
> >
> > 322 <6>[ 3.318693] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0
> Hz
> >
> > 323 <6>[ 3.324492] mmc0: Slot eject status = 0
> >
> > 324 <6>[ 3.328155] mmc0: Power save feature enable = 1
> >
> > 325 <6>[ 3.332702] mmc0: SPS-BAM data transfer mode available
> >
> > 326 <6>[ 3.337952] mmc1: mci-version: 18
> >
> > 327 <6>[ 3.346253] mmc1: bam physical base=0x12182000
> >
> > 328 <6>[ 3.355775] mmc1: bam virtual base=0xda0d8000
> >
> > 329 <6>[ 3.361178] mmc1: BAM device registered.
> > bam_handle=0xd928ca00
> >
> > 330 <6>[ 3.371066] sps:REVISION of BAM 0xda0d8000 is 0x5.
> >
> > 331 <6>[ 3.385716] mmc1: Qualcomm MSM SDCC-BAM at
> > 0x0000000012182000 irq 128
> >
> > 332 <6>[ 3.396184] mmc1: Qualcomm MSM SDCC-DML at
> > 0x0000000012180800
> >
> > 333 <6>[ 3.411597] mmc1: Qualcomm MSM SDCC-core at
> > 0x0000000012180000 irq 134,657 dma -1 dmacrcri -1
> >
> > 334 <6>[ 3.424172] mmc1: 8 bit data mode disabled
> >
> > 335 <6>[ 3.432321] mmc1: 4 bit data mode enabled
> >
> > 336 <6>[ 3.440347] mmc1: polling status mode disabled
> >
> > 337 <6>[ 3.444864] mmc1: MMC clock 400000 -> 192000000 Hz, PCLK 0
> > Hz
> >
> > 338 <6>[ 3.451670] mmc1: Slot eject status = 0
> >
> > 339 <6>[ 3.454509] mmc1: Power save feature enable = 1
> >
> > 340 <6>[ 3.458965] mmc1: SPS-BAM data transfer mode available
> >
> > 341 <6>[ 3.464672] usbcore: registered new interface driver usbhid
> >
> > 342 <6>[ 3.469678] usbhid: USB HID core driver
> >
> > 343 <6>[ 3.474011] logger: created 256K log 'log_main'
> >
> > 344 <6>[ 3.478162] logger: created 256K log 'log_events'
> >
> > 345 <6>[ 3.482923] logger: created 256K log 'log_radio'
> >
> > 346 <6>[ 3.487440] logger: created 256K log 'log_system'
> >
> > 347 <6>[ 3.492781] usbcore: registered new interface driver
> > snd-usb-audio
> >
> > 348 <6>[ 3.499587] msm_pcm_probe: dev name msm-voip-dsp
> >
> > 349 <6>[ 3.505020] msm_pcm_probe: dev name msm-pcm-dsp
> >
> > 350 <6>[ 3.510422] mmc0: new high speed MMC card at address 0001
> >
> > 351 <6>[ 3.515458] msm_compr_probe: dev name msm-compr-dsp
> >
> > 352 <6>[ 3.519853] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev
> > name msm-pcm-lpa
> >
> > 353 <6>[ 3.526415] mmcblk0: mmc0:0001 SEM16G 14.8 GiB
> >
> > 354 <6>[ 3.531268] mmcblk0boot0: mmc0:0001 SEM16G partition 1 1.00
> > MiB
> >
> > 355 <3>[ 3.537250] msm_soc_platform_init
> >
> > 356 <6>[ 3.540241] msm_afe_probe: dev name msm-pcm-afe
> >
> > 357 <6>[ 3.544605] mmcblk0boot1: mmc0:0001 SEM16G partition 2 1.00
> > MiB
> >
> > 358 <3>[ 3.551686] msm_audio_init: Not the right machine type
> >
> > 359 <3>[ 3.556386] msm_afe_afe_probe
> >
> > 360 <6>[ 3.560903] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11
> > p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
> >
> > 361 <6>[ 3.575766] mmcblk0boot1: unknown partition table
> >
> > 362 <6>[ 3.578879] tabla_codec_probe : Tabla version reg 0x21
> >
> > 363 <6>[ 3.578879] tabla_codec_probe : Tabla version 1
> >
> > 364 <6>[ 3.591973] mmcblk0boot0: unknown partition table
> >
> > 365 <6>[ 3.610712] asoc: null-codec-dai <-> MultiMedia1 mapping ok
> >
> > 366 <6>[ 3.633541] asoc: null-codec-dai <-> MultiMedia2 mapping ok
> >
> > 367 <6>[ 3.664581] asoc: null-codec-dai <-> CS-VOICE mapping ok
> >
> > 368 <6>[ 3.674988] asoc: null-codec-dai <-> VoIP mapping ok
> >
> > 369 <6>[ 3.685365] asoc: null-codec-dai <-> MultiMedia3 mapping ok
> >
> > 370 <6>[ 3.696230] asoc: null-codec-dai <-> SLIMBUS0_HOSTLESS
> > mapping ok
> >
> > 371 <6>[ 3.707431] asoc: null-codec-dai <-> INT_FM_HOSTLESS
> > mapping ok
> >
> > 372 <3>[ 3.718388] msm_asoc_pcm_new
> >
> > 373 <6>[ 3.720219] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
> >
> > 374 <3>[ 3.731878] msm_asoc_pcm_new
> >
> > 375 <6>[ 3.733709] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
> >
> > 376 <6>[ 3.745368] asoc: null-codec-dai <-> MultiMedia4 mapping ok
> >
> > 377 <6>[ 3.755989] asoc: null-codec-dai <-> HDMI_HOSTLESS mapping
> > ok
> >
> > 378 <4>[ 3.839615] tabla_codec tabla_codec: ASoC: Failed to create
> > Digital Mic1 debugfs file
> >
> > 379 <6>[ 3.854265] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
> >
> > 380 <6>[ 3.866534] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
> >
> > 381 <6>[ 3.878864] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping
> > ok
> >
> > 382 <6>[ 3.891286] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping
> > ok
> >
> > 383 <6>[ 3.903769] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping
> > ok
> >
> > 384 <6>[ 3.916191] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping
> > ok
> >
> > 385 <6>[ 3.928643] asoc: msm-stub-rx <-> msm-dai-q6.8 mapping ok
> >
> > 386 <6>[ 3.940729] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
> >
> > 387 <6>[ 3.953029] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
> >
> > 388 <6>[ 3.965267] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
> >
> > 389 <6>[ 3.977384] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
> >
> > 390 <6>[ 3.989470] asoc: msm-stub-rx <-> msm-dai-q6.32773 mapping
> > ok
> >
> > 391 <6>[ 4.001953] asoc: msm-stub-tx <-> msm-dai-q6.32772 mapping
> > ok
> >
> > 392 <6>[ 4.006897] mmc1: new high speed SDHC card at address e624
> >
> > 393 <6>[ 4.012818] mmcblk1: mmc1:e624 SU08G 7.40 GiB
> >
> > 394 <6>[ 4.014680] asoc: msm-stub-tx <-> msm-dai-q6.32771 mapping
> > ok
> >
> > 395 <6>[ 4.016908] input: msm8960-snd-card Button Jack as
> > /devices/platform/soc-audio.0/sound/card0/input3
> >
> > 396 <6>[ 4.017244] input: msm8960-snd-card Headset Jack as
> > /devices/platform/soc-audio.0/sound/card0/input4
> >
> > 397 <6>[ 4.019990] ALSA device list:
> >
> > 398 <6>[ 4.020021] #0: msm8960-snd-card
> >
> > 399 <6>[ 4.020662] oprofile: using arm/armv7-krait
> >
> > 400 <6>[ 4.020814] u32 classifier
> >
> > 401 <6>[ 4.020845] Actions configured
> >
> > 402 <6>[ 4.020845] Netfilter messages via NETLINK v0.30.
> >
> > 403 <6>[ 4.020906] nf_conntrack version 0.5.0 (10975 buckets,
> > 43900 max)
> >
> > 404 <6>[ 4.021699] ctnetlink v0.93: registering with nfnetlink.
> >
> > 405 <6>[ 4.021822] NF_TPROXY: Transparent proxy support
> > initialized, version 4.1.0
> >
> > 406 <6>[ 4.021852] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT
> > Ltd.
> >
> > 407 <6>[ 4.022188] xt_time: kernel timezone is -0000
> >
> > 408 <6>[ 4.022462] ip_tables: (C) 2000-2006 Netfilter Core Team
> >
> > 409 <6>[ 4.022707] arp_tables: (C) 2002 David S. Miller
> >
> > 410 <6>[ 4.022798] TCP cubic registered
> >
> > 411 <6>[ 4.023622] NET: Registered protocol family 10
> >
> > 412 <6>[ 4.025576] Mobile IPv6
> >
> > 413 <6>[ 4.025637] ip6_tables: (C) 2000-2006 Netfilter Core Team
> >
> > 414 <6>[ 4.025789] IPv6 over IPv4 tunneling driver
> >
> > 415 <6>[ 4.026430] NET: Registered protocol family 17
> >
> > 416 <6>[ 4.026583] Bluetooth: RFCOMM TTY layer initialized
> >
> > 417 <6>[ 4.026583] Bluetooth: RFCOMM socket layer initialized
> >
> > 418 <6>[ 4.026613] Bluetooth: RFCOMM ver 1.11
> >
> > 419 <6>[ 4.026613] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> >
> > 420 <6>[ 4.026613] Bluetooth: BNEP filters: protocol multicast
> >
> > 421 <6>[ 4.026644] Bluetooth: HIDP (Human Interface Emulation) ver
> > 1.2
> >
> > 422 <5>[ 4.026766] Registering the dns_resolver key type
> >
> > 423 <6>[ 4.026827] VFP support v0.3: implementor 51 architecture
> > 64 part 4d variant 0 rev 0
> >
> > 424 <5>[ 4.166641] Registering SWP/SWPB emulation handler
> >
> > 425 <6>[ 4.172226] mmcblk1: p1
> >
> > 426 <4>[ 4.180283] ------------[ cut here ]------------
> >
> > 427 <4>[ 4.183885] WARNING: at
> >
> /local/mnt2/workspace2/8960_file_enc_decr_2/kernel/arch/arm/mach-msm/clock-local.c:392
> > __branch_clk_disable_reg+0xe0/0xf8()
> >
> > 428 <4>[ 4.197039] codec_i2s_spkr_bit_clk status stuck at 'on'
> >
> > 429 <4>[ 4.202075] Modules linked in:
> >
> > 430 <4>[ 4.205310] [<c010c5d4>] (unwind_backtrace+0x0/0x12c) from
> > [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> >
> > 431 <4>[ 4.214771] [<c016ac5c>] (warn_slowpath_common+0x4c/0x64)
> > from [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c)
> >
> > 432 <4>[ 4.224324] [<c016acf4>] (warn_slowpath_fmt+0x2c/0x3c) from
> > [<c014c070>] (__branch_clk_disable_reg+0xe0/0xf8)
> >
> > 433 <4>[ 4.234213] [<c014c070>]
> > (__branch_clk_disable_reg+0xe0/0xf8) from [<c014c0ac>]
> > (cdiv_clk_disable+0x24/0x38)
> >
> > 434 <4>[ 4.244010] [<c014c0ac>] (cdiv_clk_disable+0x24/0x38) from
> > [<c000fc58>] (clock_late_init+0x7c/0xf4)
> >
> > 435 <4>[ 4.253044] [<c000fc58>] (clock_late_init+0x7c/0xf4) from
> > [<c0100520>] (do_one_initcall+0x94/0x164)
> >
> > 436 <4>[ 4.262078] [<c0100520>] (do_one_initcall+0x94/0x164) from
> > [<c000834c>] (kernel_init+0x88/0x130)
> >
> > 437 <4>[ 4.270837] [<c000834c>] (kernel_init+0x88/0x130) from
> > [<c0106f60>] (kernel_thread_exit+0x0/0x8)
> >
> > 438 <4>[ 4.279597] ---[ end trace da227214a82491b8 ]---
> >
> > 439 <6>[ 4.286006] clock_late_init() disabled 200 unused clocks
> >
> > 440 <6>[ 4.300808] MSM Watchdog Initialized
> >
> > 441 <6>[ 4.311826] rtc-pm8xxx rtc-pm8xxx: setting system clock to
> > 1970-01-04 21:55:22 UTC (338122)
> >
> > 442 <4>[ 4.320402] set_battery_data: invalid battery id, palladium
> > 1500 assumed
> >
> > 443 <6>[ 6.567099] pm8921_bms_probe: OK
> > battery_capacity_at_boot=94 volt = 4116009 ocv = 4217214
> >
> > 444 <6>[ 6.585899] Freeing init memory: 300K
> >
> > 445 <3>[ 6.593987] init: /init.qcom.rc: 414: invalid command
> > '/system/bin/log'
> >
> > 446 <4>[ 6.600244] init (1): /proc/1/oom_adj is deprecated, please
> > use /proc/1/oom_score_adj instead.
> >
> > 447 <3>[ 6.781657] init: cannot open '/initlogo.rle'
> >
> > 448 <6>[ 6.844742] EXT4-fs (mmcblk0p12): mounted filesystem with
> > ordered data mode. Opts: barrier=1
> >
> > 449 <6>[ 7.334503] EXT4-fs (mmcblk0p13): mounted filesystem with
> > ordered data mode. Opts: noauto_da_alloc
> >
> > 450 <6>[ 7.357576] EXT4-fs (mmcblk0p14): recovery complete
> >
> > 451 <6>[ 7.362337] EXT4-fs (mmcblk0p14): mounted filesystem with
> > ordered data mode. Opts: barrier=1
> >
> > 452 <6>[ 7.387883] EXT4-fs (mmcblk0p15): recovery complete
> >
> > 453 <6>[ 7.392736] EXT4-fs (mmcblk0p15): mounted filesystem with
> > ordered data mode. Opts: barrier=1
> >
> > 454 <6>[ 7.418159] EXT4-fs (mmcblk0p16): recovery complete
> >
> > 455 <6>[ 7.423012] EXT4-fs (mmcblk0p16): mounted filesystem with
> > ordered data mode. Opts: barrier=1
> >
> > 456 <4>[ 7.587578] pm8xxx_irq_mask_ack: mask acking rouge irq=512
> > pmirq=72
> >
> > 457 <3>[ 7.967953] init: cannot find
> > '/system/etc/install-recovery.sh', disabling 'flash_recovery'
> >
> > 458 <6>[ 8.124553] Current firmware: 9.2.0
> >
> > 459 <6>[ 8.126842] New firmware: 9.2.0
> >
> > 460 <6>[ 8.130077] cyttspfw_flash_start: Firmware version
> > lesser/equal to existing firmware, upgrade not needed
> >
> > 461 <6>[ 8.246055] warning: `rild' uses 32-bit capabilities
> > (legacy support in use)
> >
> > 462 <3>[ 8.283534] android_usb: already disabled
> >
> > 463 <6>[ 8.287257] adb_bind_config
> >
> > 464 <6>[ 8.299038] frmnet_bind: RmNet(0) dual Speed, IN:ep7in
> > OUT:ep5out
> >
> > 465 <6>[ 8.310514] adb_open
> >
> > 466 <6>[ 8.416938] android_work: did not send uevent (0 0 (null))
> >
> > 467 <6>[ 8.489485] wcnss_wlan triggered by userspace
> >
> > 468 <6>[ 8.574759] android_work: sent uevent USB_STATE=CONNECTED
> >
> > 469 <6>[ 8.581382] android_work: sent uevent
> USB_STATE=DISCONNECTED
> >
> > 470 <6>[ 8.774118] android_work: sent uevent USB_STATE=CONNECTED
> >
> > 471 <6>[ 8.786571] android_usb gadget: high speed config #1:
> > android
> >
> > 472 <6>[ 8.791515] msm_otg msm_otg: Avail curr from USB = 500
> >
> > 473 <7>[ 8.796642] diag: USB connected
> >
> > 474 <6>[ 8.797314] android_work: sent uevent USB_STATE=CONFIGURED
> >
> > 475 <6>[ 8.960231] platform pil_dsps.0: brought out of reset
> >
> > 476 <6>[ 9.098794] pil_riva pil_riva: brought out of reset
> >
> > 477 <6>[ 9.103219] alarm_set_rtc: Failed to set RTC, time will be
> > lost on reboot
> >
> > 478 <6>[ 9.136059] msm_thermal: enabled = 0
> >
> > 479 <6>[ 9.534045] wcnss_wlan_ctrl_probe: SMD ctrl channel up
> >
> > 480 <6>[ 9.700808] pil_qdsp6v4 pil_qdsp6v4.0: brought out of reset
> >
> > 481 <6>[ 9.731542] apr_tal:Q6 Is Up
> >
> > 482 <3>[ 10.563039] acdb_mmap: PMEM is not allocated, yet!
> >
> > 483 <6>[ 10.670959] apr_tal: SMD_EVENT_OPEN
> >
> > 484 <6>[ 11.339569] pil_qdsp6v4 pil_qdsp6v4.1: brought out of reset
> >
> > 485 <6>[ 15.352846] pil_qdsp6v4 pil_qdsp6v4.2: brought out of reset
> >
> > 486 <3>[ 15.357515] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 487 <3>[ 15.866076] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 488 <3>[ 16.373477] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 489 <3>[ 16.416969] Notify: smsm init
> >
> > 490 <6>[ 16.418953] _smem_log_init: no static log or log_idx
> > allocated
> >
> > 491 <6>[ 16.425331] _smem_log_init: no power log or log_idx
> allocated
> >
> > 492 <3>[ 16.880726] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 493 <3>[ 17.394597] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 494 <3>[ 17.901815] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 495 <3>[ 18.409156] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 496 <6>[ 18.839493] apr_tal:Modem Is Up
> >
> > 497 <6>[ 18.855486] sps:REVISION of BAM 0xda004000 is 0x5.
> >
> > 498 <3>[ 18.917808] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 499 <3>[ 19.425026] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 500 <6>[ 19.543781] wcnss_post_bootup: Cancel APPS vote for Iris &
> > Riva
> >
> > 501 <3>[ 19.932244] smd_pkt_open: DATA5_CNTL open failed -19
> >
> > 502 <6>[ 20.271936] request_suspend_state: wakeup (3->0) at
> > 20278228597 (1970-01-05 00:49:40.168043275 UTC)
> >
> > 503 <3>[ 20.440347] handle_bam_mux_cmd: dropping invalid LCID 10
> > reserved 0 cmd 4 pad 0 ch 10 len 0
> >
> > 504 <3>[ 20.449992] handle_bam_mux_cmd: dropping invalid LCID 11
> > reserved 0 cmd 4 pad 0 ch 11 len 0
> >
> > 505 <6>[ 20.956813] apr_tal: SMD_EVENT_OPEN
> >
> > 506 <6>[ 20.976529] acc_open
> >
> > 507 <6>[ 20.977689] acc_release
> >
> > 508 <3>[ 21.234945] init: sys_prop: permission denied uid:1001
> > name:ro.telephony.call_ring.multiple
> >
> > 509 <6>[ 21.298245] Bluetooth: opening HCI-SMD channel
> > :APPS_RIVA_BT_ACL
> >
> > 510 <6>[ 21.303219] Bluetooth: opening HCI-SMD channel
> > :APPS_RIVA_BT_CMD
> >
> > 511 <6>[ 25.827071] msm_etb msm_etb.0: etb disabled
> >
> > 512 <6>[ 25.830245] msm_tpiu msm_tpiu.0: tpiu disabled
> >
> > 513 <6>[ 25.838425] msm_etb msm_etb.0: etb enabled
> >
> > 514 <6>[ 25.841507] msm_funnel msm_funnel.0: funnel port mask 0x3
> > enabled
> >
> > 515 <6>[ 25.870471] msm_ptm msm_ptm.0: tracing enabled
> >
> > 516 <6>[ 25.885792] msm_etb msm_etb.0: etb dumped
> >
> > 517 <6>[ 25.900045] msm_etb msm_etb.0: etb disabled
> >
> > 518 <6>[ 25.912162] msm_funnel msm_funnel.0: funnel port mask 0x3
> > disabled
> >
> > 519 <6>[ 25.928063] msm_ptm msm_ptm.0: tracing disabled
> >
> > 520 <3>[ 456.144422] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 521 <5>[ 456.144452] CPU1: platform_cpu_die: normal wakeup
> >
> > 522 <3>[ 459.057836] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 523 <5>[ 459.057866] CPU1: platform_cpu_die: normal wakeup
> >
> > 524 <3>[ 461.635617] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 525 <5>[ 461.635647] CPU1: platform_cpu_die: normal wakeup
> >
> > 526 <3>[ 471.725286] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 527 <5>[ 471.725316] CPU1: platform_cpu_die: normal wakeup
> >
> > 528 <3>[ 475.743109] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 529 <5>[ 475.743109] CPU1: platform_cpu_die: normal wakeup
> >
> > 530 <6>[ 478.278956] process 873 (ndroid.systemui) no longer affine
> > to cpu1
> >
> > 531 <7>[ 478.345490] bluetoothd: unhandled page fault (11) at
> > 0x00000014, code 0x017
> >
> > 532 <1>[ 478.345521] pgd = d7c90000
> >
> > 533 <1>[ 478.347199] [00000014] *pgd=9eef4831, *pte=00000000,
> > *ppte=00000000
> >
> > 534 <4>[ 478.353425]
> >
> > 535 <3>[ 478.358278] init: untracked pid 1474 exited
> >
> > 536 <3>[ 478.361513] init: untracked pid 1590 exited
> >
> > 537 <4>[ 478.375370] Pid: 556, comm: bluetoothd
> >
> > 538 <4>[ 478.378971] CPU: 0 Tainted: G W
> > (3.0.8-00006-g7e7c91b-dirty #4)
> >
> > 539 <4>[ 478.391301] PC is at 0x40205978
> >
> > 540 <4>[ 478.393438] LR is at 0x4020595d
> >
> > 541 <4>[ 478.401800] pc : [<40205978>] lr : [<4020595d>] psr:
> > 20000030
> >
> > 542 <4>[ 478.401800] sp : bed43ae0 ip : 400c9700 fp : 00336398
> >
> > 543 <4>[ 478.425362] r10: 00000000 r9 : 401b737c r8 : 0033a830
> >
> > 544 <4>[ 478.429543] r7 : 000010f8 r6 : 4023599c r5 : 4022b5b8 r4
> > : 00000010
> >
> > 545 <4>[ 478.443857] r3 : 4022b1ca r2 : 00000001 r1 : 4022b1ca r0
> > : 00000001
> >
> > 546 <4>[ 478.449351] Flags: nzCv IRQs on FIQs on Mode USER_32
> > ISA Thumb Segment user
> >
> > 547 <4>[ 478.470318] Control: 10c5787d Table: 9ef9006a DAC:
> > 00000015
> >
> > 548 <3>[ 478.490737] init: untracked pid 1457 exited
> >
> > 549 <3>[ 478.649900] init: untracked pid 817 exited
> >
> > 550 <3>[ 478.683961] init: untracked pid 1036 exited
> >
> > 551 <3>[ 478.687196] init: untracked pid 1251 exited
> >
> > 552 <3>[ 478.691347] init: untracked pid 1300 exited
> >
> > 553 <3>[ 478.774973] init: untracked pid 406 exited
> >
> > 554 <3>[ 478.778086] init: untracked pid 565 exited
> >
> > 555 <3>[ 478.803967] init: untracked pid 629 exited
> >
> > 556 <3>[ 478.813581] init: untracked pid 644 exited
> >
> > 557 <3>[ 478.828292] CPU1: msm_pm_power_collapse: failed to restore
> > clock rate(0)
> >
> > 558 <5>[ 478.828322] CPU1: platform_cpu_die: normal wakeup
> >
> > 559 <3>[ 478.828414] init: untracked pid 657 exited
> >
> > 560 <3>[ 478.851213] init: untracked pid 670 exited
> >
> > 561 <3>[ 478.855028] init: untracked pid 695 exited
> >
> > 562 <3>[ 478.858538] init: untracked pid 732 exited
> >
> > 563 <3>[ 478.862597] init: untracked pid 951 exited
> >
> > 564 <6>[ 478.866534] msm_etb msm_etb.0: etb disabled
> >
> > 565 <3>[ 478.867846] init: untracked pid 1236 exited
> >
> > 566 <3>[ 478.867999] init: untracked pid 1269 exited
> >
> > 567 <3>[ 478.868151] init: untracked pid 1316 exited
> >
> > 568 <3>[ 478.868304] init: untracked pid 1329 exited
> >
> > 569 <3>[ 478.868457] init: untracked pid 1348 exited
> >
> > 570 <3>[ 478.868640] init: untracked pid 1361 exited
> >
> > 571 <3>[ 478.868762] init: untracked pid 1377 exited
> >
> > 572 <3>[ 478.868945] init: untracked pid 1394 exited
> >
> > 573 <3>[ 478.869067] init: untracked pid 1411 exited
> >
> > 574 <3>[ 478.869250] init: untracked pid 1427 exited
> >
> > 575 <3>[ 478.869372] init: untracked pid 1435 exited
> >
> > 576 <3>[ 478.869525] init: untracked pid 1541 exited
> >
> > 577 <3>[ 478.869677] init: untracked pid 1567 exited
> >
> > 578 <6>[ 478.926751] msm_tpiu msm_tpiu.0: tpiu disabled
> >
> > 579 <6>[ 478.931786] msm_etb msm_etb.0: etb enabled
> >
> > 580 <6>[ 478.935113] msm_funnel msm_funnel.0: funnel port mask 0x3
> > enabled
> >
> > 581 <6>[ 478.941522] msm_ptm msm_ptm.0: tracing enabled
> >
> > 582 <6>[ 478.950434] msm_etb msm_etb.0: etb dumped
> >
> > 583 <6>[ 478.953425] msm_etb msm_etb.0: etb disabled
> >
> > 584 <6>[ 478.957668] msm_funnel msm_funnel.0: funnel port mask 0x3
> > disabled
> >
> > 585 <6>[ 478.964932] msm_ptm msm_ptm.0: tracing disabled
> >
> > 586 <6>[ 479.044925] alarm_release: clear alarm, pending 0
> >
> > 587 <6>[ 479.048618] alarm_release: clear alarm, pending 0
> >
> > 588 <6>[ 479.053288] alarm_release: clear alarm, pending 0
> >
> > 589 <6>[ 479.059301] alarm_release: clear alarm, pending 0
> >
> > 590 <4>[ 481.274042] crypt_ctr: dm_crypt: entering
> >
> > 591 <4>[ 481.277124] crypt_ctr_cipher: dm_crypt: entering
> >
> > 592 <4>[ 481.281825] crypt_alloc_tfms: dm_crypt: entering
> >
> > 593 <4>[ 481.373966] crypt_alloc_tfms: dm_crypt: entering
> >
> > 594 <4>[ 481.377659] crypt_set_key: dm_crypt: entering
> >
> > 595 <4>[ 481.382053] crypt_decode_key: dm_crypt: entering
> >
> > 596 <4>[ 481.393102] crypt_setkey_allcpus: dm_crypt: entering
> >
> > 597 <4>[ 481.414802] any_tfm: dm_crypt: entering
> >
> > 598 <4>[ 481.417701] crypt_iv_essiv_ctr: dm_crypt: entering
> >
> > 599 <4>[ 481.422554] setup_essiv_cpu: dm_crypt: entering
> >
> > 600 <4>[ 481.453807] any_tfm: dm_crypt: entering
> >
> > 601 <4>[ 481.456706] setup_essiv_cpu: dm_crypt: entering
> >
> > 602 <4>[ 481.461284] any_tfm: dm_crypt: entering
> >
> > 603 <4>[ 481.486860] crypt_iv_essiv_init: dm_crypt: entering
> >
> > 604 <4>[ 481.490828] any_tfm: dm_crypt: entering
> >
> > 605 <4>[ 481.513779] any_tfm: dm_crypt: entering
> >
> > 606 <4>[ 481.524675] crypt_iterate_devices: dm_crypt: entering
> >
> > 607 <4>[ 481.529009] crypt_iterate_devices: dm_crypt: entering
> >
> > 608 <4>[ 481.543842] crypt_iterate_devices: dm_crypt: entering
> >
> > 609 <4>[ 481.547993] crypt_preresume: dm_crypt: entering
> >
> > 610 <4>[ 481.552571] crypt_resume: dm_crypt: entering
> >
> > 611 <3>[ 482.296688] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 612 <3>[ 482.300625] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 613 <3>[ 482.305966] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 614 <3>[ 482.311002] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 615 <3>[ 482.362551] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 616 <3>[ 482.366458] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 617 <3>[ 482.371097] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 618 <3>[ 482.377506] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 619 <3>[ 482.413184] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 620 <3>[ 482.417152] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 621 <3>[ 482.421638] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 622 <3>[ 482.427956] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 623 <3>[ 482.497848] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 624 <3>[ 482.501693] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 625 <3>[ 482.506943] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 626 <3>[ 482.512162] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 627 <3>[ 482.581413] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 628 <3>[ 482.585319] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 629 <3>[ 482.589867] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 630 <3>[ 482.596276] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 631 <3>[ 482.664336] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 632 <3>[ 482.668274] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 633 <3>[ 482.672791] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 634 <3>[ 482.679261] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 635 <3>[ 482.748359] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 636 <3>[ 482.752205] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 637 <3>[ 482.757454] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 638 <3>[ 482.762673] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 639 <3>[ 482.831374] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 640 <3>[ 482.835312] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 641 <3>[ 482.839829] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 642 <3>[ 482.846207] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 643 <3>[ 482.914878] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 644 <3>[ 482.918846] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 645 <3>[ 482.923332] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 646 <3>[ 482.929864] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 647 <3>[ 482.998779] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 648 <3>[ 483.002716] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 649 <3>[ 483.007996] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 650 <3>[ 483.013093] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 651 <3>[ 483.081825] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 652 <3>[ 483.085823] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 653 <3>[ 483.090248] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 654 <3>[ 483.096780] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 655 <3>[ 483.165206] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 656 <3>[ 483.169052] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 657 <3>[ 483.174515] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 658 <3>[ 483.179490] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 659 <3>[ 483.248740] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 660 <3>[ 483.252678] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 661 <3>[ 483.258019] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 662 <3>[ 483.263024] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 663 <3>[ 483.332549] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 664 <3>[ 483.336548] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 665 <3>[ 483.341004] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 666 <3>[ 483.347504] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 667 <3>[ 483.415626] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 668 <3>[ 483.419563] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 669 <3>[ 483.424843] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 670 <3>[ 483.429909] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 671 <4>[ 483.475751] crypt_map: dm_crypt: entering
> >
> > 672 <4>[ 483.492385] kcryptd_queue_crypt: dm_crypt: entering
> >
> > 673 <3>[ 483.500473] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 674 <3>[ 483.504501] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 675 <3>[ 483.508927] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 676 <3>[ 483.515397] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 677 <4>[ 483.536914] kcryptd_crypt: dm_crypt: entering
> >
> > 678 <4>[ 483.540332] kcryptd_crypt_write_convert: dm_crypt: entering
> >
> > 679 <4>[ 483.546711] crypt_map: dm_crypt: entering
> >
> > 680 <4>[ 483.562978] crypt_inc_pending: dm_crypt: entering
> >
> > 681 <4>[ 483.573782] kcryptd_queue_crypt: dm_crypt: entering
> >
> > 682 <4>[ 483.583213] crypt_alloc_buffer: dm_crypt: entering
> >
> > 683 <3>[ 483.588463] mdp4_overlay_pipe_alloc: ptype=1 FAILED
> >
> > 684 <3>[ 483.592430] mdp4_overlay_req2pipe: pipe == NULL!
> >
> > 685 <3>[ 483.597832] mdp4_overlay_set: mdp4_overlay_req2pipe,
> ret=-12
> >
> > 686 <3>[ 483.602746] msmfb_overlay_set: ioctl failed, rc=-12
> >
> > 687 <4>[ 483.609766] crypt_map: dm_crypt: entering
> >
> > 688 <4>[ 483.612849] kcryptd_queue_crypt: dm_crypt: entering
> >
> >
> > ------------------------------
> >
> > _______________________________________________
> > dm-crypt mailing list
> > dm-crypt@saout.de
> > http://www.saout.de/mailman/listinfo/dm-crypt
> >
> >
> > End of dm-crypt Digest, Vol 32, Issue 8
> > ***************************************
> >
> >
> >
> > _______________________________________________
> > dm-crypt mailing list
> > dm-crypt@saout.de
> > http://www.saout.de/mailman/listinfo/dm-crypt
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://www.saout.de/pipermail/dm-crypt/attachments/20120209/d77debc9/attachment.html
> >
>
> ------------------------------
>
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt
>
>
> End of dm-crypt Digest, Vol 32, Issue 12
> ****************************************
>
>
>
> _______________________________________________
> dm-crypt mailing list
> dm-crypt@saout.de
> http://www.saout.de/mailman/listinfo/dm-crypt
>
>
[-- Attachment #1.2: Type: text/html, Size: 77311 bytes --]
[-- Attachment #2: proc_crypto.txt --]
[-- Type: text/plain, Size: 6703 bytes --]
root@android:/ # cat proc/crypto
cat proc/crypto
name : cbc(aes)
driver : qcrypto-cbc-aes
module : kernel
priority : 300
refcnt : 1
selftest : passed
type : givcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : eseqiv
name : ccm(aes)
driver : qcrypto-aes-ccm
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : aead
async : yes
blocksize : 16
ivsize : 16
maxauthsize : 20
geniv : <built-in>
name : hmac(sha256)
driver : qcrypto-hmac-sha256
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ahash
async : yes
blocksize : 64
digestsize : 32
name : hmac(sha1)
driver : qcrypto-hmac-sha1
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ahash
async : yes
blocksize : 64
digestsize : 20
name : sha256
driver : qcrypto-sha256
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ahash
async : yes
blocksize : 64
digestsize : 32
name : sha1
driver : qcrypto-sha1
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ahash
async : yes
blocksize : 64
digestsize : 20
name : xts(aes)
driver : qcrypto-xts-aes
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
name : cbc(des3_ede)
driver : qcrypto-cbc-3des
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 8
min keysize : 24
max keysize : 24
ivsize : 8
geniv : <default>
name : ecb(des3_ede)
driver : qcrypto-ecb-3des
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 8
min keysize : 24
max keysize : 24
ivsize : 0
geniv : <default>
name : cbc(des)
driver : qcrypto-cbc-des
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 8
min keysize : 8
max keysize : 8
ivsize : 8
geniv : <default>
name : ecb(des)
driver : qcrypto-ecb-des
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 8
min keysize : 8
max keysize : 8
ivsize : 0
geniv : <default>
name : ctr(aes)
driver : qcrypto-ctr-aes
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
name : cbc(aes)
driver : qcrypto-cbc-aes
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
name : ecb(aes)
driver : qcrypto-ecb-aes
module : qcrypto
priority : 300
refcnt : 1
selftest : passed
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 0
geniv : <default>
name : ecb(aes)
driver : ecb(aes-generic)
module : kernel
priority : 100
refcnt : 2
selftest : passed
type : blkcipher
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 0
geniv : <default>
name : stdrng
driver : krng
module : kernel
priority : 200
refcnt : 2
selftest : passed
type : rng
seedsize : 0
name : crc32c
driver : crc32c-generic
module : kernel
priority : 100
refcnt : 2
selftest : passed
type : shash
blocksize : 1
digestsize : 4
name : deflate
driver : deflate-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : compression
name : arc4
driver : arc4-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : cipher
blocksize : 1
min keysize : 1
max keysize : 256
name : aes
driver : aes-generic
module : kernel
priority : 100
refcnt : 2
selftest : passed
type : cipher
blocksize : 16
min keysize : 16
max keysize : 32
name : twofish
driver : twofish-generic
module : kernel
priority : 100
refcnt : 1
selftest : passed
type : cipher
blocksize : 16
min keysize : 16
max keysize : 32
name : des3_ede
driver : des3_ede-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : cipher
blocksize : 8
min keysize : 24
max keysize : 24
name : des
driver : des-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : cipher
blocksize : 8
min keysize : 8
max keysize : 8
name : sha256
driver : sha256-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 32
name : sha224
driver : sha224-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 28
name : sha1
driver : sha1-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 20
name : md5
driver : md5-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 16
name : md4
driver : md4-generic
module : kernel
priority : 0
refcnt : 1
selftest : passed
type : shash
blocksize : 64
digestsize : 16
^ permalink raw reply [flat|nested] 3+ messages in thread