Linux Device Mapper development
 help / color / mirror / Atom feed
From: Christophe Varoqui <christophe.varoqui@gmail.com>
To: Benjamin Marzinski <bmarzins@redhat.com>
Cc: device-mapper development <dm-devel@redhat.com>
Subject: Re: [PATCH 00/16] multipath-tools: miscellaneous multipath patches
Date: Mon, 06 May 2013 21:45:31 +0200	[thread overview]
Message-ID: <1367869531.5573.2.camel@lapoo.opensvc.com> (raw)
In-Reply-To: <1367531197-8987-1-git-send-email-bmarzins@redhat.com>

On jeu., 2013-05-02 at 16:46 -0500, Benjamin Marzinski wrote:
> Here are the patches I've got since my last resync.
> 
> Please apply.
> 
The series is applied and pushed.

- 11v2/16 is merged in place of 11/16
- 05/16 is left out pending analysis of the solution suggested by Bart

Thanks,
Christophe Varoqui
www.opensvc.com

> Philipp Schmidt (1):
>   Make kpartx correctly handle non-512 byte GPT partitions
> 
> Benjamin Marzinski (15):
>   Make kpartx advise modprobe instead of insmod
>   Fix print_multipath_topology for large outputs
>   Don't print checker messages for ghost paths
>   Fix a couple of signal issues
>   Fix hardware entry matching code
>   Fix some socket issues
>   Avoid race between ueventloop and uevqloop
>   Add existing multipath devices to wwids file on configure
>   add wwids file cleanup options
>   Fix max path checker timing
>   Make set_multipath_wwid actually do something
>   Make multipathd deal better with uninitialized paths
>   Stop annoying prio_lookup warning messages
>   make multipathd disable queue_without_daemon by default
>   Use mapname to choose kpartx delimiter
> 
>  kpartx/gpt.c                      |   9 ++-
>  kpartx/kpartx.c                   |   2 +-
>  kpartx/lopart.c                   |   4 +-
>  libmpathpersist/mpath_updatepr.c  |   3 +-
>  libmultipath/config.c             |   2 +
>  libmultipath/dict.c               |  10 ++-
>  libmultipath/discovery.c          |   8 ++-
>  libmultipath/log_pthread.c        |   3 +
>  libmultipath/print.c              |  30 +++++++--
>  libmultipath/prio.c               |   5 +-
>  libmultipath/structs.h            |   2 +-
>  libmultipath/structs_vec.c        |   2 +-
>  libmultipath/uevent.c             |  12 ++--
>  libmultipath/uxsock.c             |   4 +-
>  libmultipath/wwids.c              | 130 ++++++++++++++++++++++++++++++++++++++
>  libmultipath/wwids.h              |   2 +
>  multipath/main.c                  |  51 +++++++++++++--
>  multipath/multipath.8             |   8 ++-
>  multipathd/cli.c                  |   3 +
>  multipathd/cli.h                  |   2 +
>  multipathd/cli_handlers.c         |  18 ++++++
>  multipathd/cli_handlers.h         |   2 +
>  multipathd/main.c                 |  41 ++++++++----
>  multipathd/multipathd.init.redhat |  14 ++--
>  24 files changed, 313 insertions(+), 54 deletions(-)
> 

      parent reply	other threads:[~2013-05-06 19:45 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-05-02 21:46 [PATCH 00/16] multipath-tools: miscellaneous multipath patches Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 01/16] Make kpartx advise modprobe instead of insmod Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 02/16] Make kpartx correctly handle non-512 byte GPT Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 03/16] Fix print_multipath_topology for large outputs Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 04/16] Don't print checker messages for ghost paths Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 05/16] Fix a couple of signal issues Benjamin Marzinski
2013-05-03  6:36   ` Bart Van Assche
2013-05-03 20:24     ` Benjamin Marzinski
2013-05-04  7:19       ` Bart Van Assche
2013-05-02 21:46 ` [PATCH 06/16] Fix hardware entry matching code Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 07/16] Fix some socket issues Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 08/16] Avoid race between ueventloop and uevqloop Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 09/16] Add existing multipath devices to wwids file on Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 10/16] add wwids file cleanup options Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 11/16] Fix max path checker timing Benjamin Marzinski
2013-05-03  6:59   ` Hannes Reinecke
2013-05-03 15:44     ` Benjamin Marzinski
2013-05-03 17:59       ` [PATCH v2 " Benjamin Marzinski
2013-05-06  5:42         ` Hannes Reinecke
2013-05-02 21:46 ` [PATCH 12/16] Make set_multipath_wwid actually do something Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 13/16] Make multipathd deal better with uninitialized paths Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 14/16] Stop annoying prio_lookup warning messages Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 15/16] make multipathd disable queue_without_daemon by default Benjamin Marzinski
2013-05-02 21:46 ` [PATCH 16/16] Use mapname to choose kpartx delimiter Benjamin Marzinski
2013-05-06 19:45 ` Christophe Varoqui [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1367869531.5573.2.camel@lapoo.opensvc.com \
    --to=christophe.varoqui@gmail.com \
    --cc=bmarzins@redhat.com \
    --cc=christophe.varoqui@opensvc.com \
    --cc=dm-devel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox