Linux Device Mapper development
 help / color / mirror / Atom feed
From: Hannes Reinecke <hare@suse.de>
To: Christophe Varoqui <christophe.varoqui@gmail.com>
Cc: dm-devel@redhat.com
Subject: [PATCH 41/78] Add paths with a size of '0' as 'ghost' paths
Date: Mon, 16 Mar 2015 13:36:28 +0100	[thread overview]
Message-ID: <1426509425-15978-42-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1426509425-15978-1-git-send-email-hare@suse.de>

SPC-3 does not require that a port in 'standby' has to support
the 'READ CAPACITY' command. As such we should not reject those
paths, but rather add them as 'ghost' paths.

Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 libmultipath/discovery.c   |  5 +++++
 libmultipath/structs_vec.c |  2 +-
 multipathd/main.c          | 26 +++++---------------------
 3 files changed, 11 insertions(+), 22 deletions(-)

diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c
index 7d3ff49..6ba14ac 100644
--- a/libmultipath/discovery.c
+++ b/libmultipath/discovery.c
@@ -1215,6 +1215,11 @@ pathinfo (struct path *pp, vector hwtable, int mask)
 				goto blank;
 			if (pp->state == PATH_TIMEOUT)
 				pp->state = PATH_DOWN;
+			if (pp->state == PATH_UP && !pp->size) {
+				condlog(3, "%s: device size is 0, "
+					"path unuseable", pp->dev);
+				pp->state = PATH_GHOST;
+			}
 		} else {
 			condlog(3, "%s: path inaccessible", pp->dev);
 			pp->chkrstate = pp->state = path_state;
diff --git a/libmultipath/structs_vec.c b/libmultipath/structs_vec.c
index 79f31b1..6be8c51 100644
--- a/libmultipath/structs_vec.c
+++ b/libmultipath/structs_vec.c
@@ -558,7 +558,7 @@ int update_multipath (struct vectors *vecs, char *mapname, int reset)
 
 			if (pp->state != PATH_DOWN) {
 				int oldstate = pp->state;
-				condlog(2, "%s: mark as failed", pp->dev_t);
+				condlog(2, "%s: mark as failed", pp->dev);
 				mpp->stat_path_failures++;
 				pp->state = PATH_DOWN;
 				if (oldstate == PATH_UP ||
diff --git a/multipathd/main.c b/multipathd/main.c
index ac1e1a2..6a3fd5e 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -479,15 +479,10 @@ ev_add_path (struct path * pp, struct vectors * vecs)
 	mpp = pp->mpp = find_mp_by_wwid(vecs->mpvec, pp->wwid);
 rescan:
 	if (mpp) {
-		if ((!pp->size) || (mpp->size != pp->size)) {
-			if (!pp->size)
-				condlog(0, "%s: failed to add new path %s, "
-					"device size is 0",
-					mpp->alias, pp->dev);
-			else
-				condlog(0, "%s: failed to add new path %s, "
-					"device size mismatch",
-					mpp->alias, pp->dev);
+		if (mpp->size != pp->size) {
+			condlog(0, "%s: failed to add new path %s, "
+				"device size mismatch",
+				mpp->alias, pp->dev);
 			int i = find_slot(vecs->pathvec, (void *)pp);
 			if (i != -1)
 				vector_del_slot(vecs->pathvec, i);
@@ -503,18 +498,7 @@ rescan:
 		verify_paths(mpp, vecs, NULL);
 		mpp->flush_on_last_del = FLUSH_UNDEF;
 		mpp->action = ACT_RELOAD;
-	}
-	else {
-		if (!pp->size) {
-			condlog(0, "%s: failed to create new map,"
-				" device size is 0 ", pp->dev);
-			int i = find_slot(vecs->pathvec, (void *)pp);
-			if (i != -1)
-				vector_del_slot(vecs->pathvec, i);
-			free_path(pp);
-			return 1;
-		}
-
+	} else {
 		if (conf->find_multipaths &&
 		    !should_multipath(pp, vecs->pathvec)) {
 			orphan_path(pp, "only one path");
-- 
1.8.4.5

  parent reply	other threads:[~2015-03-16 12:36 UTC|newest]

Thread overview: 98+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-16 12:35 [PATCH 00/78] SUSE SLES resync Hannes Reinecke
2015-03-16 12:35 ` [PATCH 01/78] libmultipath: remove compilation warning in devmapper.c Hannes Reinecke
2015-03-16 12:35 ` [PATCH 02/78] mpath_persist: Do not call exit() from a shared library Hannes Reinecke
2015-03-16 12:35 ` [PATCH 03/78] libmultipath: filter for missing property in get_refwwid() Hannes Reinecke
2015-03-16 12:35 ` [PATCH 04/78] Double uevent stacksize yet again Hannes Reinecke
2015-03-16 12:35 ` [PATCH 05/78] discovery: do not fail discovery on individual devices Hannes Reinecke
2015-03-16 12:35 ` [PATCH 06/78] libmultipath: Prefer deprecated 'getuid' callout Hannes Reinecke
2015-03-16 12:35 ` [PATCH 07/78] libmultipath: Skip paths with empty wwid Hannes Reinecke
2015-03-16 12:35 ` [PATCH 08/78] Make systemd installation path configurable Hannes Reinecke
2015-03-16 12:35 ` [PATCH 09/78] Add multipath rules for systemd support Hannes Reinecke
2015-03-16 12:35 ` [PATCH 10/78] Fixup multipathd.socket to resolve ordering dependeny Hannes Reinecke
2015-03-16 12:35 ` [PATCH 11/78] Fixup dependencies in multipathd.service Hannes Reinecke
2015-03-16 12:35 ` [PATCH 12/78] multipathd: set correct PID when running in debug mode Hannes Reinecke
2015-03-16 12:36 ` [PATCH 13/78] Do not print empty device strings during discovery Hannes Reinecke
2015-03-16 12:36 ` [PATCH 14/78] kpartx.rules: do not call blkid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 15/78] Use 'SCSI_IDENT_.*' as the default property whitelist Hannes Reinecke
2015-03-16 12:36 ` [PATCH 16/78] Fixup wwid blacklist printing Hannes Reinecke
2015-03-16 12:36 ` [PATCH 17/78] Allow for empty path argument when printing information Hannes Reinecke
2015-03-16 12:36 ` [PATCH 18/78] Disable reassign maps per default Hannes Reinecke
2015-03-16 12:36 ` [PATCH 19/78] multipathd: implement 'list path <path>' cli command Hannes Reinecke
2015-03-16 12:36 ` [PATCH 20/78] Make checker_put() and prio_put() idempotent Hannes Reinecke
2015-03-16 12:36 ` [PATCH 21/78] Remove trailing linefeed from sysfs attributes Hannes Reinecke
2015-03-16 12:36 ` [PATCH 22/78] multipath: implement option '-u' for uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 23/78] Install multipath rule under '56-multipath.rules' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 24/78] multipath.rules: Whitelist devices Hannes Reinecke
2015-03-16 12:36 ` [PATCH 25/78] multipath.rules: fixup race condition with systemd Hannes Reinecke
2015-03-16 12:36 ` [PATCH 26/78] 11-dm-mpath.rules: Import blkid values if all paths are down Hannes Reinecke
2015-03-27  3:42   ` Benjamin Marzinski
2015-03-27 16:03     ` Hannes Reinecke
2015-03-27 16:14       ` Benjamin Marzinski
2015-03-16 12:36 ` [PATCH 27/78] kpartx.rules: Skip kpartx for multipath events Hannes Reinecke
2015-03-16 12:36 ` [PATCH 28/78] multipathd: handle DOMAP_RETRY Hannes Reinecke
2015-03-16 12:36 ` [PATCH 29/78] multipathd: cleanup foreground operation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 30/78] Update hwtable for EMC XtremIO Hannes Reinecke
2015-03-16 12:36 ` [PATCH 31/78] multipath: check for running daemon when called with '-u' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 32/78] Revert 'return PATH_DOWN for quiesced paths' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 33/78] Do not treat 'transport-offline' paths as 'offline' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 34/78] Check for valid DM_DEVICE_INFO before proceeding Hannes Reinecke
2015-03-16 12:36 ` [PATCH 35/78] Separate out uevent parsing functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 36/78] Use poll() when receiving uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 37/78] mpath_persist: cleanup Hannes Reinecke
2015-03-16 12:36 ` [PATCH 38/78] kpartx: use standard 'major' and 'minor' macros Hannes Reinecke
2015-03-16 12:36 ` [PATCH 39/78] multipath: Use standard 'major' macro Hannes Reinecke
2015-03-16 12:36 ` [PATCH 40/78] Remove sysfs_get_dev Hannes Reinecke
2015-03-16 12:36 ` Hannes Reinecke [this message]
2015-03-16 12:36 ` [PATCH 42/78] Remove last argument from verify_paths() Hannes Reinecke
2015-03-16 12:36 ` [PATCH 43/78] Fixup device-mapper 'cookie' handling Hannes Reinecke
2015-03-25 16:30   ` Benjamin Marzinski
2015-03-25 16:59     ` Benjamin Marzinski
2015-03-26 14:20     ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 44/78] multipath: do not print state 'orphan' for option '-l' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 45/78] Return error when receiving CLI packet Hannes Reinecke
2015-03-16 12:36 ` [PATCH 46/78] Implement 'uxsock_timeout' keyword Hannes Reinecke
2015-03-16 12:36 ` [PATCH 47/78] Do not print empty multipaths section Hannes Reinecke
2015-03-16 12:36 ` [PATCH 48/78] multipathd: reload map if reinstate failed Hannes Reinecke
2015-03-16 12:36 ` [PATCH 49/78] multipathd: do not remove paths without uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 50/78] Allow zero-sized devices during configuration Hannes Reinecke
2015-03-27  3:56   ` Benjamin Marzinski
2015-03-27  7:16     ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 51/78] Rework uev_add_path() Hannes Reinecke
2015-03-16 12:36 ` [PATCH 52/78] multipathd: Issue warning on CLI command timeout Hannes Reinecke
2015-03-16 12:36 ` [PATCH 53/78] Use strlen() when checking for valid wwid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 54/78] multipathd: Use standard lists for CLI handling Hannes Reinecke
2015-03-16 12:36 ` [PATCH 55/78] uxlsnr: use typedef for trigger function Hannes Reinecke
2015-03-16 12:36 ` [PATCH 56/78] multipathd: lock cli client list Hannes Reinecke
2015-03-16 12:36 ` [PATCH 57/78] multipath: enable sync support Hannes Reinecke
2015-03-16 12:36 ` [PATCH 58/78] Remove dm_udev_XXX wrapper functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 59/78] Revert to ACT_RELOAD in domap if the map exists Hannes Reinecke
2015-03-16 12:36 ` [PATCH 60/78] multipathd: use local variable for watchdog configuration Hannes Reinecke
2015-03-16 12:36 ` [PATCH 61/78] Ignore devices when sysfs_get_tgt_nodename fails Hannes Reinecke
2015-03-16 12:36 ` [PATCH 62/78] Skip USB devices during discovery Hannes Reinecke
2015-03-16 12:36 ` [PATCH 63/78] Read wwid from sysfs vpg_pg83 attribute Hannes Reinecke
2015-03-16 12:36 ` [PATCH 64/78] Assign local priority for NAA VPD descriptor Hannes Reinecke
2015-03-16 12:36 ` [PATCH 65/78] Use sysfs attribute vpd_pg80 to read serial number Hannes Reinecke
2015-03-16 12:36 ` [PATCH 66/78] Update multipath.conf.5 to clarify wwid generation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 67/78] libmultipath: Fall back to SG_IO if no UID could be assigned Hannes Reinecke
2015-03-16 12:36 ` [PATCH 68/78] libmultipath: unset 'uid_attribute' on failure Hannes Reinecke
2015-03-27  4:10   ` Benjamin Marzinski
2015-03-27  7:17     ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 69/78] Separate out vpd parsing functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 70/78] multipathd: use SG_IO as fallback to generate uid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 71/78] Do not automatically fall back to vpd uid generation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 72/78] libmultipath: make vpd page 0x80 optional Hannes Reinecke
2015-03-16 12:37 ` [PATCH 73/78] multipathd: push down lock in checkerloop() Hannes Reinecke
2015-03-27  4:21   ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 74/78] Allow specific CLI commands to run unlocked Hannes Reinecke
2015-03-27  5:38   ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 75/78] Push down vector lock during uevent processing Hannes Reinecke
2015-03-27  5:46   ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 76/78] multipathd: timeout CLI commands when waiting for lock Hannes Reinecke
2015-03-16 12:37 ` [PATCH 77/78] multipathd: asynchronous configuration Hannes Reinecke
2015-03-27  5:58   ` Benjamin Marzinski
2015-03-27  8:09     ` Hannes Reinecke
2015-03-16 12:37 ` [PATCH 78/78] multipathd: trigger all devices on startup Hannes Reinecke
2015-03-27  5:59   ` Benjamin Marzinski
2015-03-27  7:22     ` Hannes Reinecke
2015-03-29 16:28 ` [PATCH 00/78] SUSE SLES resync Christophe Varoqui
2015-03-30  6:07   ` Hannes Reinecke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426509425-15978-42-git-send-email-hare@suse.de \
    --to=hare@suse.de \
    --cc=christophe.varoqui@gmail.com \
    --cc=dm-devel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox