From: Hannes Reinecke <hare@suse.de>
To: Christophe Varoqui <christophe.varoqui@gmail.com>
Cc: dm-devel@redhat.com
Subject: [PATCH 45/78] Return error when receiving CLI packet
Date: Mon, 16 Mar 2015 13:36:32 +0100 [thread overview]
Message-ID: <1426509425-15978-46-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1426509425-15978-1-git-send-email-hare@suse.de>
When receiving a packet from the CLI we should be returning
an error code.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
libmpathpersist/mpath_updatepr.c | 20 ++++++++++++--------
libmultipath/configure.c | 2 +-
libmultipath/defaults.h | 1 +
libmultipath/uxsock.c | 30 +++++++++++++++++++-----------
libmultipath/uxsock.h | 4 ++--
multipathd/main.c | 4 ++--
multipathd/uxclnt.c | 26 +++++++++++++++++---------
multipathd/uxclnt.h | 2 +-
multipathd/uxlsnr.c | 3 ++-
9 files changed, 57 insertions(+), 35 deletions(-)
diff --git a/libmpathpersist/mpath_updatepr.c b/libmpathpersist/mpath_updatepr.c
index 8597d40..dce580f 100644
--- a/libmpathpersist/mpath_updatepr.c
+++ b/libmpathpersist/mpath_updatepr.c
@@ -35,15 +35,19 @@ int update_prflag(char * arg1, char * arg2, int noisy)
snprintf(str,sizeof(str),"map %s %s", arg1, arg2);
condlog (2, "%s: pr flag message=%s", arg1, str);
send_packet(fd, str, strlen(str) + 1);
- recv_packet(fd, &reply, &len);
-
- condlog (2, "%s: message=%s reply=%s", arg1, str, reply);
- if (!reply || strncmp(reply,"ok", 2) == 0)
- ret = -1;
- else if (strncmp(reply, "fail", 4) == 0)
+ ret = recv_packet(fd, &reply, &len, DEFAULT_UXSOCK_TIMEOUT);
+ if (ret < 0) {
+ condlog(2, "%s: message=%s error=%d", arg1, str, -ret);
ret = -2;
- else{
- ret = atoi(reply);
+ } else {
+ condlog (2, "%s: message=%s reply=%s", arg1, str, reply);
+ if (!reply || strncmp(reply,"ok", 2) == 0)
+ ret = -1;
+ else if (strncmp(reply, "fail", 4) == 0)
+ ret = -2;
+ else{
+ ret = atoi(reply);
+ }
}
free(reply);
diff --git a/libmultipath/configure.c b/libmultipath/configure.c
index 3c230a1..720d074 100644
--- a/libmultipath/configure.c
+++ b/libmultipath/configure.c
@@ -714,7 +714,7 @@ int check_daemon(void)
if (send_packet(fd, "show daemon", 12) != 0)
goto out;
- if (recv_packet(fd, &reply, &len) != 0)
+ if (recv_packet(fd, &reply, &len, DEFAULT_UXSOCK_TIMEOUT) != 0)
goto out;
if (strstr(reply, "shutdown"))
diff --git a/libmultipath/defaults.h b/libmultipath/defaults.h
index 878da14..8902f40 100644
--- a/libmultipath/defaults.h
+++ b/libmultipath/defaults.h
@@ -20,6 +20,7 @@
#define DEFAULT_DEFERRED_REMOVE DEFERRED_REMOVE_OFF
#define DEFAULT_DELAY_CHECKS DELAY_CHECKS_OFF
#define DEFAULT_UEVENT_STACKSIZE 256
+#define DEFAULT_UXSOCK_TIMEOUT 1000
#define DEFAULT_CHECKINT 5
#define MAX_CHECKINT(a) (a << 2)
diff --git a/libmultipath/uxsock.c b/libmultipath/uxsock.c
index aff7a62..af0798c 100644
--- a/libmultipath/uxsock.c
+++ b/libmultipath/uxsock.c
@@ -128,7 +128,7 @@ size_t write_all(int fd, const void *buf, size_t len)
/*
* keep reading until its all read
*/
-size_t read_all(int fd, void *buf, size_t len)
+ssize_t read_all(int fd, void *buf, size_t len, unsigned int timeout)
{
size_t total = 0;
ssize_t n;
@@ -138,21 +138,20 @@ size_t read_all(int fd, void *buf, size_t len)
while (len) {
pfd.fd = fd;
pfd.events = POLLIN;
- ret = poll(&pfd, 1, 1000);
+ ret = poll(&pfd, 1, timeout);
if (!ret) {
- errno = ETIMEDOUT;
- return total;
+ return -ETIMEDOUT;
} else if (ret < 0) {
if (errno == EINTR)
continue;
- return total;
+ return -errno;
} else if (!pfd.revents & POLLIN)
continue;
n = read(fd, buf, len);
if (n < 0) {
if ((errno == EINTR) || (errno == EAGAIN))
continue;
- return total;
+ return -errno;
}
if (!n)
return total;
@@ -190,12 +189,20 @@ int send_packet(int fd, const char *buf, size_t len)
/*
* receive a packet in length prefix format
*/
-int recv_packet(int fd, char **buf, size_t *len)
+int recv_packet(int fd, char **buf, size_t *len, unsigned int timeout)
{
- if (read_all(fd, len, sizeof(*len)) != sizeof(*len)) {
+ ssize_t ret;
+
+ ret = read_all(fd, len, sizeof(*len), timeout);
+ if (ret < 0) {
(*buf) = NULL;
*len = 0;
- return -1;
+ return ret;
+ }
+ if (ret < sizeof(*len)) {
+ (*buf) = NULL;
+ *len = 0;
+ return -EIO;
}
if (len == 0) {
(*buf) = NULL;
@@ -204,11 +211,12 @@ int recv_packet(int fd, char **buf, size_t *len)
(*buf) = MALLOC(*len);
if (!*buf)
return -1;
- if (read_all(fd, *buf, *len) != *len) {
+ ret = read_all(fd, *buf, *len, timeout);
+ if (ret != *len) {
FREE(*buf);
(*buf) = NULL;
*len = 0;
- return -1;
+ return ret < 0 ? ret : -EIO;
}
return 0;
}
diff --git a/libmultipath/uxsock.h b/libmultipath/uxsock.h
index fd82552..94af8d8 100644
--- a/libmultipath/uxsock.h
+++ b/libmultipath/uxsock.h
@@ -2,6 +2,6 @@
int ux_socket_connect(const char *name);
int ux_socket_listen(const char *name);
int send_packet(int fd, const char *buf, size_t len);
-int recv_packet(int fd, char **buf, size_t *len);
+int recv_packet(int fd, char **buf, size_t *len, unsigned int timeout);
size_t write_all(int fd, const void *buf, size_t len);
-size_t read_all(int fd, void *buf, size_t len);
+ssize_t read_all(int fd, void *buf, size_t len, unsigned int timeout);
diff --git a/multipathd/main.c b/multipathd/main.c
index ffe4326..9db2e55 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -2023,7 +2023,7 @@ main (int argc, char *argv[])
logsink = -1;
break;
case 'k':
- uxclnt(optarg);
+ uxclnt(optarg, DEFAULT_UXSOCK_TIMEOUT);
exit(0);
case 'B':
conf->bindings_read_only = 1;
@@ -2045,7 +2045,7 @@ main (int argc, char *argv[])
optind++;
}
c += snprintf(c, s + CMDSIZE - c, "\n");
- uxclnt(s);
+ uxclnt(s, DEFAULT_UXSOCK_TIMEOUT);
exit(0);
}
diff --git a/multipathd/uxclnt.c b/multipathd/uxclnt.c
index e86be21..536579f 100644
--- a/multipathd/uxclnt.c
+++ b/multipathd/uxclnt.c
@@ -9,6 +9,7 @@
#include <unistd.h>
#include <stdarg.h>
#include <fcntl.h>
+#include <errno.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <sys/socket.h>
@@ -63,10 +64,11 @@ static int need_quit(char *str, size_t len)
/*
* process the client
*/
-static void process(int fd)
+static void process(int fd, unsigned int timeout)
{
char *line;
char *reply;
+ int ret;
cli_init();
rl_readline_name = "multipathd";
@@ -84,7 +86,8 @@ static void process(int fd)
break;
if (send_packet(fd, line, llen + 1) != 0) break;
- if (recv_packet(fd, &reply, &len) != 0) break;
+ ret = recv_packet(fd, &reply, &len, timeout);
+ if (ret != 0) break;
print_reply(reply);
@@ -96,18 +99,23 @@ static void process(int fd)
}
}
-static void process_req(int fd, char * inbuf)
+static void process_req(int fd, char * inbuf, unsigned int timeout)
{
char *reply;
size_t len;
+ int ret;
if (send_packet(fd, inbuf, strlen(inbuf) + 1) != 0) {
printf("cannot send packet\n");
return;
}
- if (recv_packet(fd, &reply, &len) != 0)
- printf("error receiving packet\n");
- else {
+ ret = recv_packet(fd, &reply, &len, timeout);
+ if (ret < 0) {
+ if (ret == -ETIMEDOUT)
+ printf("timeout receiving packet\n");
+ else
+ printf("error %d receiving packet\n", ret);
+ } else {
printf("%s", reply);
FREE(reply);
}
@@ -116,7 +124,7 @@ static void process_req(int fd, char * inbuf)
/*
* entry point
*/
-int uxclnt(char * inbuf)
+int uxclnt(char * inbuf, unsigned int timeout)
{
int fd;
@@ -125,9 +133,9 @@ int uxclnt(char * inbuf)
exit(1);
if (inbuf)
- process_req(fd, inbuf);
+ process_req(fd, inbuf, timeout);
else
- process(fd);
+ process(fd, timeout);
return 0;
}
diff --git a/multipathd/uxclnt.h b/multipathd/uxclnt.h
index 0667a24..8e2cdce 100644
--- a/multipathd/uxclnt.h
+++ b/multipathd/uxclnt.h
@@ -1 +1 @@
-int uxclnt(char * inbuf);
+int uxclnt(char * inbuf, unsigned int timeout);
diff --git a/multipathd/uxlsnr.c b/multipathd/uxlsnr.c
index ed8e012..624d4eb 100644
--- a/multipathd/uxlsnr.c
+++ b/multipathd/uxlsnr.c
@@ -158,7 +158,8 @@ void * uxsock_listen(int (*uxsock_trigger)(char *, char **, int *, void *),
struct client *next = c->next;
if (polls[i].revents & POLLIN) {
- if (recv_packet(c->fd, &inbuf, &len) != 0) {
+ if (recv_packet(c->fd, &inbuf, &len,
+ DEFAULT_UXSOCK_TIMEOUT) != 0) {
dead_client(c);
} else {
inbuf[len - 1] = 0;
--
1.8.4.5
next prev parent reply other threads:[~2015-03-16 12:36 UTC|newest]
Thread overview: 98+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-16 12:35 [PATCH 00/78] SUSE SLES resync Hannes Reinecke
2015-03-16 12:35 ` [PATCH 01/78] libmultipath: remove compilation warning in devmapper.c Hannes Reinecke
2015-03-16 12:35 ` [PATCH 02/78] mpath_persist: Do not call exit() from a shared library Hannes Reinecke
2015-03-16 12:35 ` [PATCH 03/78] libmultipath: filter for missing property in get_refwwid() Hannes Reinecke
2015-03-16 12:35 ` [PATCH 04/78] Double uevent stacksize yet again Hannes Reinecke
2015-03-16 12:35 ` [PATCH 05/78] discovery: do not fail discovery on individual devices Hannes Reinecke
2015-03-16 12:35 ` [PATCH 06/78] libmultipath: Prefer deprecated 'getuid' callout Hannes Reinecke
2015-03-16 12:35 ` [PATCH 07/78] libmultipath: Skip paths with empty wwid Hannes Reinecke
2015-03-16 12:35 ` [PATCH 08/78] Make systemd installation path configurable Hannes Reinecke
2015-03-16 12:35 ` [PATCH 09/78] Add multipath rules for systemd support Hannes Reinecke
2015-03-16 12:35 ` [PATCH 10/78] Fixup multipathd.socket to resolve ordering dependeny Hannes Reinecke
2015-03-16 12:35 ` [PATCH 11/78] Fixup dependencies in multipathd.service Hannes Reinecke
2015-03-16 12:35 ` [PATCH 12/78] multipathd: set correct PID when running in debug mode Hannes Reinecke
2015-03-16 12:36 ` [PATCH 13/78] Do not print empty device strings during discovery Hannes Reinecke
2015-03-16 12:36 ` [PATCH 14/78] kpartx.rules: do not call blkid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 15/78] Use 'SCSI_IDENT_.*' as the default property whitelist Hannes Reinecke
2015-03-16 12:36 ` [PATCH 16/78] Fixup wwid blacklist printing Hannes Reinecke
2015-03-16 12:36 ` [PATCH 17/78] Allow for empty path argument when printing information Hannes Reinecke
2015-03-16 12:36 ` [PATCH 18/78] Disable reassign maps per default Hannes Reinecke
2015-03-16 12:36 ` [PATCH 19/78] multipathd: implement 'list path <path>' cli command Hannes Reinecke
2015-03-16 12:36 ` [PATCH 20/78] Make checker_put() and prio_put() idempotent Hannes Reinecke
2015-03-16 12:36 ` [PATCH 21/78] Remove trailing linefeed from sysfs attributes Hannes Reinecke
2015-03-16 12:36 ` [PATCH 22/78] multipath: implement option '-u' for uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 23/78] Install multipath rule under '56-multipath.rules' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 24/78] multipath.rules: Whitelist devices Hannes Reinecke
2015-03-16 12:36 ` [PATCH 25/78] multipath.rules: fixup race condition with systemd Hannes Reinecke
2015-03-16 12:36 ` [PATCH 26/78] 11-dm-mpath.rules: Import blkid values if all paths are down Hannes Reinecke
2015-03-27 3:42 ` Benjamin Marzinski
2015-03-27 16:03 ` Hannes Reinecke
2015-03-27 16:14 ` Benjamin Marzinski
2015-03-16 12:36 ` [PATCH 27/78] kpartx.rules: Skip kpartx for multipath events Hannes Reinecke
2015-03-16 12:36 ` [PATCH 28/78] multipathd: handle DOMAP_RETRY Hannes Reinecke
2015-03-16 12:36 ` [PATCH 29/78] multipathd: cleanup foreground operation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 30/78] Update hwtable for EMC XtremIO Hannes Reinecke
2015-03-16 12:36 ` [PATCH 31/78] multipath: check for running daemon when called with '-u' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 32/78] Revert 'return PATH_DOWN for quiesced paths' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 33/78] Do not treat 'transport-offline' paths as 'offline' Hannes Reinecke
2015-03-16 12:36 ` [PATCH 34/78] Check for valid DM_DEVICE_INFO before proceeding Hannes Reinecke
2015-03-16 12:36 ` [PATCH 35/78] Separate out uevent parsing functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 36/78] Use poll() when receiving uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 37/78] mpath_persist: cleanup Hannes Reinecke
2015-03-16 12:36 ` [PATCH 38/78] kpartx: use standard 'major' and 'minor' macros Hannes Reinecke
2015-03-16 12:36 ` [PATCH 39/78] multipath: Use standard 'major' macro Hannes Reinecke
2015-03-16 12:36 ` [PATCH 40/78] Remove sysfs_get_dev Hannes Reinecke
2015-03-16 12:36 ` [PATCH 41/78] Add paths with a size of '0' as 'ghost' paths Hannes Reinecke
2015-03-16 12:36 ` [PATCH 42/78] Remove last argument from verify_paths() Hannes Reinecke
2015-03-16 12:36 ` [PATCH 43/78] Fixup device-mapper 'cookie' handling Hannes Reinecke
2015-03-25 16:30 ` Benjamin Marzinski
2015-03-25 16:59 ` Benjamin Marzinski
2015-03-26 14:20 ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 44/78] multipath: do not print state 'orphan' for option '-l' Hannes Reinecke
2015-03-16 12:36 ` Hannes Reinecke [this message]
2015-03-16 12:36 ` [PATCH 46/78] Implement 'uxsock_timeout' keyword Hannes Reinecke
2015-03-16 12:36 ` [PATCH 47/78] Do not print empty multipaths section Hannes Reinecke
2015-03-16 12:36 ` [PATCH 48/78] multipathd: reload map if reinstate failed Hannes Reinecke
2015-03-16 12:36 ` [PATCH 49/78] multipathd: do not remove paths without uevents Hannes Reinecke
2015-03-16 12:36 ` [PATCH 50/78] Allow zero-sized devices during configuration Hannes Reinecke
2015-03-27 3:56 ` Benjamin Marzinski
2015-03-27 7:16 ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 51/78] Rework uev_add_path() Hannes Reinecke
2015-03-16 12:36 ` [PATCH 52/78] multipathd: Issue warning on CLI command timeout Hannes Reinecke
2015-03-16 12:36 ` [PATCH 53/78] Use strlen() when checking for valid wwid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 54/78] multipathd: Use standard lists for CLI handling Hannes Reinecke
2015-03-16 12:36 ` [PATCH 55/78] uxlsnr: use typedef for trigger function Hannes Reinecke
2015-03-16 12:36 ` [PATCH 56/78] multipathd: lock cli client list Hannes Reinecke
2015-03-16 12:36 ` [PATCH 57/78] multipath: enable sync support Hannes Reinecke
2015-03-16 12:36 ` [PATCH 58/78] Remove dm_udev_XXX wrapper functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 59/78] Revert to ACT_RELOAD in domap if the map exists Hannes Reinecke
2015-03-16 12:36 ` [PATCH 60/78] multipathd: use local variable for watchdog configuration Hannes Reinecke
2015-03-16 12:36 ` [PATCH 61/78] Ignore devices when sysfs_get_tgt_nodename fails Hannes Reinecke
2015-03-16 12:36 ` [PATCH 62/78] Skip USB devices during discovery Hannes Reinecke
2015-03-16 12:36 ` [PATCH 63/78] Read wwid from sysfs vpg_pg83 attribute Hannes Reinecke
2015-03-16 12:36 ` [PATCH 64/78] Assign local priority for NAA VPD descriptor Hannes Reinecke
2015-03-16 12:36 ` [PATCH 65/78] Use sysfs attribute vpd_pg80 to read serial number Hannes Reinecke
2015-03-16 12:36 ` [PATCH 66/78] Update multipath.conf.5 to clarify wwid generation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 67/78] libmultipath: Fall back to SG_IO if no UID could be assigned Hannes Reinecke
2015-03-16 12:36 ` [PATCH 68/78] libmultipath: unset 'uid_attribute' on failure Hannes Reinecke
2015-03-27 4:10 ` Benjamin Marzinski
2015-03-27 7:17 ` Hannes Reinecke
2015-03-16 12:36 ` [PATCH 69/78] Separate out vpd parsing functions Hannes Reinecke
2015-03-16 12:36 ` [PATCH 70/78] multipathd: use SG_IO as fallback to generate uid Hannes Reinecke
2015-03-16 12:36 ` [PATCH 71/78] Do not automatically fall back to vpd uid generation Hannes Reinecke
2015-03-16 12:36 ` [PATCH 72/78] libmultipath: make vpd page 0x80 optional Hannes Reinecke
2015-03-16 12:37 ` [PATCH 73/78] multipathd: push down lock in checkerloop() Hannes Reinecke
2015-03-27 4:21 ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 74/78] Allow specific CLI commands to run unlocked Hannes Reinecke
2015-03-27 5:38 ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 75/78] Push down vector lock during uevent processing Hannes Reinecke
2015-03-27 5:46 ` Benjamin Marzinski
2015-03-16 12:37 ` [PATCH 76/78] multipathd: timeout CLI commands when waiting for lock Hannes Reinecke
2015-03-16 12:37 ` [PATCH 77/78] multipathd: asynchronous configuration Hannes Reinecke
2015-03-27 5:58 ` Benjamin Marzinski
2015-03-27 8:09 ` Hannes Reinecke
2015-03-16 12:37 ` [PATCH 78/78] multipathd: trigger all devices on startup Hannes Reinecke
2015-03-27 5:59 ` Benjamin Marzinski
2015-03-27 7:22 ` Hannes Reinecke
2015-03-29 16:28 ` [PATCH 00/78] SUSE SLES resync Christophe Varoqui
2015-03-30 6:07 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426509425-15978-46-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=christophe.varoqui@gmail.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox