Linux Device Mapper development
 help / color / mirror / Atom feed
From: Benjamin Marzinski <bmarzins@redhat.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>
Cc: device-mapper development <dm-devel@redhat.com>,
	Martin Wilck <mwilck@suse.com>
Subject: [PATCH v2 07/12] multipathd: ignore failed wwid recheck
Date: Fri,  8 Mar 2019 17:12:00 -0600	[thread overview]
Message-ID: <1552086725-18476-8-git-send-email-bmarzins@redhat.com> (raw)
In-Reply-To: <1552086725-18476-1-git-send-email-bmarzins@redhat.com>

If disable_changed_wwids is set, when multipathd gets a change event on
a path, it verifies that the wwid hasn't changed in uev_update_path().
If get_uid() failed, uev_update_path treated this as a wwid change to 0.
This could cause paths to suddenly be dropped due to an issue with
getting the wwid.  Even if get_uid() failed because the path was down,
it no change uevent happend when it later became active, multipathd
would continue to ignore the path. Also, scsi_uid_fallback() clears the
failure return if it doesn't attempt to fallback, causing get_uid()
to return success, when it actually failed.

Multipathd should neither set nor clear wwid_changed if get_uid()
returned failure. Also, scsi_uid_fallback() should retain the old return
value if it doesn't attempt to fallback.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
---
 libmultipath/discovery.c | 6 +++---
 multipathd/main.c        | 6 ++++--
 2 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c
index 729bcb9..b08cb2d 100644
--- a/libmultipath/discovery.c
+++ b/libmultipath/discovery.c
@@ -1755,9 +1755,9 @@ get_vpd_uid(struct path * pp)
 }
 
 static ssize_t scsi_uid_fallback(struct path *pp, int path_state,
-			     const char **origin)
+			     const char **origin, ssize_t old_len)
 {
-	ssize_t len = 0;
+	ssize_t len = old_len;
 	int retrigger;
 	struct config *conf;
 
@@ -1828,7 +1828,7 @@ get_uid (struct path * pp, int path_state, struct udev_device *udev)
 			origin = "sysfs";
 		}
 		if (len <= 0 && pp->bus == SYSFS_BUS_SCSI)
-			len = scsi_uid_fallback(pp, path_state, &origin);
+			len = scsi_uid_fallback(pp, path_state, &origin, len);
 	}
 	if ( len < 0 ) {
 		condlog(1, "%s: failed to get %s uid: %s",
diff --git a/multipathd/main.c b/multipathd/main.c
index 678ecf8..fd83a6a 100644
--- a/multipathd/main.c
+++ b/multipathd/main.c
@@ -1234,9 +1234,11 @@ uev_update_path (struct uevent *uev, struct vectors * vecs)
 			goto out;
 
 		strcpy(wwid, pp->wwid);
-		get_uid(pp, pp->state, uev->udev);
+		rc = get_uid(pp, pp->state, uev->udev);
 
-		if (strncmp(wwid, pp->wwid, WWID_SIZE) != 0) {
+		if (rc != 0)
+			strcpy(pp->wwid, wwid);
+		else if (strncmp(wwid, pp->wwid, WWID_SIZE) != 0) {
 			condlog(0, "%s: path wwid changed from '%s' to '%s'. %s",
 				uev->kernel, wwid, pp->wwid,
 				(disable_changed_wwids ? "disallowing" :
-- 
2.17.2

  parent reply	other threads:[~2019-03-08 23:12 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-03-08 23:11 [PATCH v2 00/12] Misc Multipath patches Benjamin Marzinski
2019-03-08 23:11 ` [PATCH v2 01/12] libmultipath: disable user_friendly_names for NetApp Benjamin Marzinski
2019-03-17 15:04   ` Xose Vazquez Perez
2019-03-18  9:45     ` Martin Wilck
2019-03-08 23:11 ` [PATCH v2 02/12] libmultipath: handle existing paths in marginal_path enqueue Benjamin Marzinski
2019-03-08 23:11 ` [PATCH v2 03/12] multipathd: cleanup marginal paths checking timers Benjamin Marzinski
2019-03-08 23:11 ` [PATCH v2 04/12] libmultipath: fix marginal paths queueing errors Benjamin Marzinski
2019-03-08 23:11 ` [PATCH v2 05/12] libmultipath: fix marginal_paths nr_active check Benjamin Marzinski
2019-03-08 23:11 ` [PATCH v2 06/12] multipathd: Fix miscounting active paths Benjamin Marzinski
2019-03-08 23:12 ` Benjamin Marzinski [this message]
2019-03-15 11:48   ` [PATCH v2 07/12] multipathd: ignore failed wwid recheck Martin Wilck
2019-03-19 17:13     ` Benjamin Marzinski
2019-03-08 23:12 ` [PATCH v2 08/12] libmutipath: continue to use old state on PATH_PENDING Benjamin Marzinski
2019-03-08 23:12 ` [PATCH v2 09/12] multipathd: use update_path_groups instead of reload_map Benjamin Marzinski
2019-03-15 11:49   ` Martin Wilck
2019-03-08 23:12 ` [PATCH v2 10/12] multipath.conf: add missing options to man page Benjamin Marzinski
2019-03-15 11:49   ` Martin Wilck
2019-03-19 17:14     ` Benjamin Marzinski
2019-03-08 23:12 ` [PATCH v2 11/12] libmultipath: add get_uid fallback code for NVMe devices Benjamin Marzinski
2019-03-15 11:49   ` Martin Wilck
2019-03-19 17:15     ` Benjamin Marzinski
2019-03-20  7:55       ` Martin Wilck
2019-03-08 23:12 ` [PATCH v2 12/12] multipathd: change failed get_uid handling Benjamin Marzinski
2019-03-15 11:50   ` Martin Wilck
2019-03-19 17:20     ` Benjamin Marzinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1552086725-18476-8-git-send-email-bmarzins@redhat.com \
    --to=bmarzins@redhat.com \
    --cc=christophe.varoqui@opensvc.com \
    --cc=dm-devel@redhat.com \
    --cc=mwilck@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox