From: Martin Wilck <mwilck@suse.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>,
Benjamin Marzinski <bmarzins@redhat.com>
Cc: dm-devel@redhat.com, Martin Wilck <mwilck@suse.com>
Subject: [PATCH v5 13/21] libmultipath: clariion checker: leave unsupported paths alone
Date: Fri, 2 Nov 2018 13:21:17 +0100 [thread overview]
Message-ID: <20181102122125.30906-14-mwilck@suse.com> (raw)
In-Reply-To: <20181102122125.30906-1-mwilck@suse.com>
A checker shouldn't set the path state to PATH_DOWN if it fails
to obtain information about the path in the first place. Add logic
to the checker to distinguish a failed path from an unsupported path.
Reviewed-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
---
libmultipath/checkers/emc_clariion.c | 54 ++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/libmultipath/checkers/emc_clariion.c b/libmultipath/checkers/emc_clariion.c
index f8e55b93..6fc89113 100644
--- a/libmultipath/checkers/emc_clariion.c
+++ b/libmultipath/checkers/emc_clariion.c
@@ -20,6 +20,11 @@
#define INQUIRY_CMD 0x12
#define INQUIRY_CMDLEN 6
#define HEAVY_CHECK_COUNT 10
+#define SCSI_COMMAND_TERMINATED 0x22
+#define SCSI_CHECK_CONDITION 0x2
+#define RECOVERED_ERROR 0x01
+#define ILLEGAL_REQUEST 0x05
+#define SG_ERR_DRIVER_SENSE 0x08
/*
* Mechanism to track CLARiiON inactive snapshot LUs.
@@ -130,7 +135,9 @@ int libcheck_check (struct checker * c)
(struct emc_clariion_checker_path_context *)c->context;
char wwnstr[33];
int ret;
+ int retry_emc = 5;
+retry:
memset(&io_hdr, 0, sizeof (struct sg_io_hdr));
memset(sense_buffer, 0, 128);
memset(sb, 0, SENSE_BUFF_LEN);
@@ -145,13 +152,60 @@ int libcheck_check (struct checker * c)
io_hdr.timeout = c->timeout * 1000;
io_hdr.pack_id = 0;
if (ioctl(c->fd, SG_IO, &io_hdr) < 0) {
+ if (errno == ENOTTY) {
+ c->msgid = CHECKER_MSGID_UNSUPPORTED;
+ return PATH_WILD;
+ }
c->msgid = MSG_CLARIION_QUERY_FAILED;
return PATH_DOWN;
}
+
if (io_hdr.info & SG_INFO_OK_MASK) {
+ switch (io_hdr.host_status) {
+ case DID_BUS_BUSY:
+ case DID_ERROR:
+ case DID_SOFT_ERROR:
+ case DID_TRANSPORT_DISRUPTED:
+ /* Transport error, retry */
+ if (--retry_emc)
+ goto retry;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (SCSI_CHECK_CONDITION == io_hdr.status ||
+ SCSI_COMMAND_TERMINATED == io_hdr.status ||
+ SG_ERR_DRIVER_SENSE == (0xf & io_hdr.driver_status)) {
+ if (io_hdr.sbp && (io_hdr.sb_len_wr > 2)) {
+ unsigned char *sbp = io_hdr.sbp;
+ int sense_key;
+
+ if (sbp[0] & 0x2)
+ sense_key = sbp[1] & 0xf;
+ else
+ sense_key = sbp[2] & 0xf;
+
+ if (sense_key == ILLEGAL_REQUEST) {
+ c->msgid = CHECKER_MSGID_UNSUPPORTED;
+ return PATH_WILD;
+ } else if (sense_key != RECOVERED_ERROR) {
+ condlog(1, "emc_clariion_checker: INQUIRY failed with sense key %02x",
+ sense_key);
+ c->msgid = MSG_CLARIION_QUERY_ERROR;
+ return PATH_DOWN;
+ }
+ }
+ }
+
+ if (io_hdr.info & SG_INFO_OK_MASK) {
+ condlog(1, "emc_clariion_checker: INQUIRY failed without sense, status %02x",
+ io_hdr.status);
c->msgid = MSG_CLARIION_QUERY_ERROR;
return PATH_DOWN;
}
+
if (/* Verify the code page - right page & revision */
sense_buffer[1] != 0xc0 || sense_buffer[9] != 0x00) {
c->msgid = MSG_CLARIION_UNIT_REPORT;
--
2.19.1
next prev parent reply other threads:[~2018-11-02 12:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 12:21 [PATCH v5 00/21] libmultipath: checkers overhaul Martin Wilck
2018-11-02 12:21 ` [PATCH v5 01/21] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-11-02 12:21 ` [PATCH v5 02/21] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-11-02 12:21 ` [PATCH v5 03/21] libmultipath/checkers: replace message by msgid Martin Wilck
2018-11-02 16:05 ` Benjamin Marzinski
2018-11-02 12:21 ` [PATCH v5 04/21] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-11-02 12:21 ` [PATCH v5 05/21] libmultipath/checkers: directio: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 06/21] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 07/21] libmultipath/checkers: hp_sw: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 08/21] libmultipath/checkers: rdac: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 09/21] libmultipath/checkers: readsector0: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 10/21] libmultipath/checkers: tur: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 11/21] multipathd: improve checker message logging Martin Wilck
2018-11-02 16:54 ` Benjamin Marzinski
2018-11-02 12:21 ` [PATCH v5 12/21] libmultipath/checkers: support unsupported paths Martin Wilck
2018-11-02 12:21 ` Martin Wilck [this message]
2018-11-02 12:21 ` [PATCH v5 14/21] libmultipath: hp_sw checker: leave unsupported paths alone Martin Wilck
2018-11-02 12:21 ` [PATCH v5 15/21] libmultipath: rdac " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 16/21] libmultipath: tur " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 17/21] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-11-02 12:21 ` [PATCH v5 18/21] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-11-02 12:21 ` [PATCH v5 19/21] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-11-02 12:21 ` [PATCH v5 20/21] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-11-02 12:21 ` [PATCH v5 21/21] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-11-14 7:39 ` [PATCH v5 00/21] libmultipath: checkers overhaul Christophe Varoqui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102122125.30906-14-mwilck@suse.com \
--to=mwilck@suse.com \
--cc=bmarzins@redhat.com \
--cc=christophe.varoqui@opensvc.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox