From: Martin Wilck <mwilck@suse.com>
To: Christophe Varoqui <christophe.varoqui@opensvc.com>,
Benjamin Marzinski <bmarzins@redhat.com>
Cc: dm-devel@redhat.com, Martin Wilck <mwilck@suse.com>
Subject: [PATCH v5 03/21] libmultipath/checkers: replace message by msgid
Date: Fri, 2 Nov 2018 13:21:07 +0100 [thread overview]
Message-ID: <20181102122125.30906-4-mwilck@suse.com> (raw)
In-Reply-To: <20181102122125.30906-1-mwilck@suse.com>
Replace the character array "message" in struct checker with
a "message ID" field.
The generic checker code defines a couple of standard message IDs
and corresponding messages. Checker-specific message IDs start
at CHECKER_FIRST_MSG. Checkers that implement specific message
IDs must provide a table for converting the IDs into actual log
messages.
This simplifies the checker data structure and the handling of
checker messages in the critical checker code path. It comes at
the cost that only constant message strings are supported. It
turns out that only a single checker log message (in the emc_clariion
checker) was dynamically generated, and the missing information can
be provided with a standard condlog message.
Follow-up patches implement this for the existing checkers.
Signed-off-by: Martin Wilck <mwilck@suse.com>
---
libmultipath/checkers.c | 61 +++++++++++++++++++++++++++++++++-------
libmultipath/checkers.h | 43 ++++++++++++++++++++++++----
libmultipath/discovery.c | 4 +--
3 files changed, 90 insertions(+), 18 deletions(-)
diff --git a/libmultipath/checkers.c b/libmultipath/checkers.c
index 0bacc864..a1b5cb45 100644
--- a/libmultipath/checkers.c
+++ b/libmultipath/checkers.c
@@ -141,6 +141,22 @@ struct checker * add_checker (char *multipath_dir, char * name)
if (!c->free)
goto out;
+ c->msgtable_size = 0;
+ c->msgtable = dlsym(c->handle, "libcheck_msgtable");
+
+ if (c->msgtable != NULL) {
+ const char **p;
+
+ for (p = c->msgtable;
+ *p && (p - c->msgtable) < CHECKER_MSGTABLE_SIZE; p++)
+ /* nothing */;
+
+ c->msgtable_size = p - c->msgtable;
+ } else
+ c->msgtable_size = 0;
+ condlog(3, "checker %s: message table size = %d",
+ c->name, c->msgtable_size);
+
done:
c->fd = -1;
c->sync = 1;
@@ -222,16 +238,16 @@ int checker_check (struct checker * c, int path_state)
if (!c)
return PATH_WILD;
- c->message[0] = '\0';
+ c->msgid = CHECKER_MSGID_NONE;
if (c->disable) {
- MSG(c, "checker disabled");
+ c->msgid = CHECKER_MSGID_DISABLED;
return PATH_UNCHECKED;
}
if (!strncmp(c->name, NONE, 4))
return path_state;
if (c->fd < 0) {
- MSG(c, "no usable fd");
+ c->msgid = CHECKER_MSGID_NO_FD;
return PATH_WILD;
}
r = c->check(c);
@@ -248,25 +264,48 @@ int checker_selected (struct checker * c)
return (c->check) ? 1 : 0;
}
-char * checker_name (struct checker * c)
+const char *checker_name(const struct checker *c)
{
if (!c)
return NULL;
return c->name;
}
-char * checker_message (struct checker * c)
+static const char *generic_msg[CHECKER_GENERIC_MSGTABLE_SIZE] = {
+ [CHECKER_MSGID_NONE] = "",
+ [CHECKER_MSGID_DISABLED] = " is disabled",
+ [CHECKER_MSGID_NO_FD] = " has no usable fd",
+ [CHECKER_MSGID_INVALID] = " provided invalid message id",
+ [CHECKER_MSGID_UP] = " reports path is up",
+ [CHECKER_MSGID_DOWN] = " reports path is down",
+ [CHECKER_MSGID_GHOST] = " reports path is ghost",
+};
+
+const char *checker_message(const struct checker *c)
{
- if (!c)
- return NULL;
- return c->message;
+ int id;
+
+ if (!c || c->msgid < 0 ||
+ (c->msgid >= CHECKER_GENERIC_MSGTABLE_SIZE &&
+ c->msgid < CHECKER_FIRST_MSGID))
+ goto bad_id;
+
+ if (c->msgid < CHECKER_GENERIC_MSGTABLE_SIZE)
+ return generic_msg[c->msgid];
+
+ id = c->msgid - CHECKER_FIRST_MSGID;
+ if (id < c->cls->msgtable_size)
+ return c->cls->msgtable[id];
+
+bad_id:
+ return generic_msg[CHECKER_MSGID_NONE];
}
void checker_clear_message (struct checker *c)
{
if (!c)
return;
- c->message[0] = '\0';
+ c->msgid = CHECKER_MSGID_NONE;
}
void checker_get (char *multipath_dir, struct checker * dst, char * name)
@@ -288,10 +327,12 @@ void checker_get (char *multipath_dir, struct checker * dst, char * name)
dst->fd = src->fd;
dst->sync = src->sync;
strncpy(dst->name, src->name, CHECKER_NAME_LEN);
- strncpy(dst->message, src->message, CHECKER_MSG_LEN);
+ dst->msgid = CHECKER_MSGID_NONE;
dst->check = src->check;
dst->init = src->init;
dst->free = src->free;
+ dst->msgtable = src->msgtable;
+ dst->msgtable_size = src->msgtable_size;
dst->handle = NULL;
src->refcount++;
}
diff --git a/libmultipath/checkers.h b/libmultipath/checkers.h
index 7b18a1ac..8e26f1df 100644
--- a/libmultipath/checkers.h
+++ b/libmultipath/checkers.h
@@ -97,6 +97,22 @@ enum path_check_state {
#define CHECKER_DEV_LEN 256
#define LIB_CHECKER_NAMELEN 256
+/*
+ * Generic message IDs for use in checkers.
+ */
+enum {
+ CHECKER_MSGID_NONE = 0,
+ CHECKER_MSGID_DISABLED,
+ CHECKER_MSGID_NO_FD,
+ CHECKER_MSGID_INVALID,
+ CHECKER_MSGID_UP,
+ CHECKER_MSGID_DOWN,
+ CHECKER_MSGID_GHOST,
+ CHECKER_GENERIC_MSGTABLE_SIZE,
+ CHECKER_FIRST_MSGID = 100, /* lowest msgid for checkers */
+ CHECKER_MSGTABLE_SIZE = 100, /* max msg table size for checkers */
+};
+
struct checker {
struct list_head node;
void *handle;
@@ -106,7 +122,7 @@ struct checker {
unsigned int timeout;
int disable;
char name[CHECKER_NAME_LEN];
- char message[CHECKER_MSG_LEN]; /* comm with callers */
+ short msgid; /* checker-internal extra status */
void * context; /* store for persistent data */
void ** mpcontext; /* store for persistent data shared
multipath-wide. Use MALLOC if
@@ -114,10 +130,10 @@ struct checker {
int (*check)(struct checker *);
int (*init)(struct checker *); /* to allocate the context */
void (*free)(struct checker *); /* to free the context */
+ const char**msgtable;
+ short msgtable_size;
};
-#define MSG(c, fmt, args...) snprintf((c)->message, CHECKER_MSG_LEN, fmt, ##args);
-
char * checker_state_name (int);
int init_checkers (char *);
void cleanup_checkers (void);
@@ -134,14 +150,29 @@ void checker_enable (struct checker *);
void checker_disable (struct checker *);
int checker_check (struct checker *, int);
int checker_selected (struct checker *);
-char * checker_name (struct checker *);
-char * checker_message (struct checker *);
+const char *checker_name (const struct checker *);
+/*
+ * This returns a string that's best prepended with "$NAME checker",
+ * where $NAME is the return value of checker_name().
+ */
+const char *checker_message(const struct checker *);
void checker_clear_message (struct checker *c);
void checker_get (char *, struct checker *, char *);
-/* Functions exported by path checker dynamic libraries (.so) */
+/* Prototypes for symbols exported by path checker dynamic libraries (.so) */
int libcheck_check(struct checker *);
int libcheck_init(struct checker *);
void libcheck_free(struct checker *);
+/*
+ * msgid => message map.
+ *
+ * It only needs to be provided if the checker defines specific
+ * message IDs.
+ * Message IDs available to checkers start at CHECKER_FIRST_MSG.
+ * The msgtable array is 0-based, i.e. msgtable[0] is the message
+ * for msgid == __CHECKER_FIRST_MSG.
+ * The table ends with a NULL element.
+ */
+extern const char *libcheck_msgtable[];
#endif /* _CHECKERS_H */
diff --git a/libmultipath/discovery.c b/libmultipath/discovery.c
index 3550c3a7..5e59e273 100644
--- a/libmultipath/discovery.c
+++ b/libmultipath/discovery.c
@@ -1589,8 +1589,8 @@ get_state (struct path * pp, struct config *conf, int daemon, int oldstate)
checker_name(c), checker_state_name(state));
if (state != PATH_UP && state != PATH_GHOST &&
strlen(checker_message(c)))
- condlog(3, "%s: checker msg is \"%s\"",
- pp->dev, checker_message(c));
+ condlog(3, "%s: %s checker%s",
+ pp->dev, checker_name(c), checker_message(c));
return state;
}
--
2.19.1
next prev parent reply other threads:[~2018-11-02 12:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-02 12:21 [PATCH v5 00/21] libmultipath: checkers overhaul Martin Wilck
2018-11-02 12:21 ` [PATCH v5 01/21] libmultipath: fix use of uninitialized memory in write() Martin Wilck
2018-11-02 12:21 ` [PATCH v5 02/21] libmultipath: fix memory leaks from scandir() use Martin Wilck
2018-11-02 12:21 ` Martin Wilck [this message]
2018-11-02 16:05 ` [PATCH v5 03/21] libmultipath/checkers: replace message by msgid Benjamin Marzinski
2018-11-02 12:21 ` [PATCH v5 04/21] libmultipath/checkers: cciss_tur: use message id Martin Wilck
2018-11-02 12:21 ` [PATCH v5 05/21] libmultipath/checkers: directio: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 06/21] libmultipath/checkers: emc_clariion: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 07/21] libmultipath/checkers: hp_sw: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 08/21] libmultipath/checkers: rdac: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 09/21] libmultipath/checkers: readsector0: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 10/21] libmultipath/checkers: tur: " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 11/21] multipathd: improve checker message logging Martin Wilck
2018-11-02 16:54 ` Benjamin Marzinski
2018-11-02 12:21 ` [PATCH v5 12/21] libmultipath/checkers: support unsupported paths Martin Wilck
2018-11-02 12:21 ` [PATCH v5 13/21] libmultipath: clariion checker: leave unsupported paths alone Martin Wilck
2018-11-02 12:21 ` [PATCH v5 14/21] libmultipath: hp_sw " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 15/21] libmultipath: rdac " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 16/21] libmultipath: tur " Martin Wilck
2018-11-02 12:21 ` [PATCH v5 17/21] libmultipath: pathinfo: don't blank wwid if checker fails Martin Wilck
2018-11-02 12:21 ` [PATCH v5 18/21] multipathd: check_path: improve logging for "unusable path" case Martin Wilck
2018-11-02 12:21 ` [PATCH v5 19/21] libmultipath: coalesce_paths: improve logging of orphaned paths Martin Wilck
2018-11-02 12:21 ` [PATCH v5 20/21] libmultipath: sync_map_state: log failing paths Martin Wilck
2018-11-02 12:21 ` [PATCH v5 21/21] libmultipath/checkers: cleanup class/instance model Martin Wilck
2018-11-14 7:39 ` [PATCH v5 00/21] libmultipath: checkers overhaul Christophe Varoqui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181102122125.30906-4-mwilck@suse.com \
--to=mwilck@suse.com \
--cc=bmarzins@redhat.com \
--cc=christophe.varoqui@opensvc.com \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox