Linux Device Mapper development
 help / color / mirror / Atom feed
From: Mike Snitzer <snitzer@redhat.com>
To: dm-devel@redhat.com
Subject: [PATCH v2 7/9] dm: improve noclone_endio() to support multipath target
Date: Wed, 20 Feb 2019 16:44:34 -0500	[thread overview]
Message-ID: <20190220214436.38476-8-snitzer@redhat.com> (raw)
In-Reply-To: <20190220214436.38476-1-snitzer@redhat.com>

noclone_endio() must call the target's ->endio method if it exists.
Also must handle the various DM_ENDIO_* returns that are possible.

Factor out dm_bio_pushback_needed() for both dec_pending() and
noclone_endio() to use when handling BLK_STS_DM_REQUEUE.

Lastly, there is no need to conditionally set md->immutable_target in
__bind().  If the device only uses a single immutable target then it
should always be reflected in md->immutable_target.  This is important
because noclone_endio() benefits from this to get access to the
multipath dm_target without needing to add another member to the
'dm_noclone' structure.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
 drivers/md/dm.c | 80 ++++++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 57 insertions(+), 23 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 7e022f840419..0943913bceca 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -919,6 +919,28 @@ static int __noflush_suspending(struct mapped_device *md)
 	return test_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
 }
 
+static bool dm_bio_pushback_needed(struct mapped_device *md,
+				   struct bio *bio, blk_status_t *error)
+{
+	unsigned long flags;
+
+	/*
+	 * Target requested pushing back the I/O.
+	 */
+	if (__noflush_suspending(md)) {
+		spin_lock_irqsave(&md->deferred_lock, flags);
+		// FIXME: using bio_list_add_head() creates LIFO
+		bio_list_add_head(&md->deferred, bio);
+		spin_unlock_irqrestore(&md->deferred_lock, flags);
+		return true;
+	} else {
+		/* noflush suspend was interrupted. */
+		*error = BLK_STS_IOERR;
+	}
+
+	return false;
+}
+
 /*
  * Decrements the number of outstanding ios that a bio has been
  * cloned into, completing the original io if necc.
@@ -939,22 +961,12 @@ static void dec_pending(struct dm_io *io, blk_status_t error)
 	}
 
 	if (atomic_dec_and_test(&io->io_count)) {
-		if (io->status == BLK_STS_DM_REQUEUE) {
-			/*
-			 * Target requested pushing back the I/O.
-			 */
-			spin_lock_irqsave(&md->deferred_lock, flags);
-			if (__noflush_suspending(md))
-				/* NOTE early return due to BLK_STS_DM_REQUEUE below */
-				bio_list_add_head(&md->deferred, io->orig_bio);
-			else
-				/* noflush suspend was interrupted. */
-				io->status = BLK_STS_IOERR;
-			spin_unlock_irqrestore(&md->deferred_lock, flags);
-		}
+		bio = io->orig_bio;
+
+		if (unlikely(io->status == BLK_STS_DM_REQUEUE))
+			(void) dm_bio_pushback_needed(md, bio, &io->status);
 
 		io_error = io->status;
-		bio = io->orig_bio;
 
 		if (unlikely(dm_stats_used(&md->stats))) {
 			unsigned long duration = jiffies - io->start_time;
@@ -1041,8 +1053,33 @@ static void clone_endio(struct bio *bio)
 
 static void noclone_endio(struct bio *bio)
 {
+	blk_status_t error = bio->bi_status;
 	struct dm_noclone *noclone = bio->bi_private;
 	struct mapped_device *md = noclone->md;
+	struct dm_target *ti = NULL;
+	dm_endio_fn endio = NULL;
+
+	if (md->immutable_target) {
+		ti = md->immutable_target;
+		endio = ti->type->end_io;
+	}
+
+	if (endio) {
+		int r = endio(ti, bio, &error);
+		switch (r) {
+		case DM_ENDIO_REQUEUE:
+			error = BLK_STS_DM_REQUEUE;
+			/*FALLTHRU*/
+		case DM_ENDIO_DONE:
+			break;
+		case DM_ENDIO_INCOMPLETE:
+			/* The target will handle the io */
+			return;
+		default:
+			DMWARN("unimplemented target endio return value: %d", r);
+			BUG();
+		}
+	}
 
 	end_io_acct(md, bio, noclone->start_time);
 
@@ -1050,6 +1087,11 @@ static void noclone_endio(struct bio *bio)
 	bio->bi_private = noclone->orig_bi_private;
 	kfree(noclone);
 
+	if (unlikely(error == BLK_STS_DM_REQUEUE)) {
+		if (dm_bio_pushback_needed(md, bio, &bio->bi_status))
+			return;
+	}
+
 	bio_endio(bio);
 }
 
@@ -2249,15 +2291,7 @@ static struct dm_table *__bind(struct mapped_device *md, struct dm_table *t,
 	if (request_based)
 		dm_stop_queue(q);
 
-	if (request_based || md->type == DM_TYPE_NVME_BIO_BASED) {
-		/*
-		 * Leverage the fact that request-based DM targets and
-		 * NVMe bio based targets are immutable singletons
-		 * - used to optimize both dm_request_fn and dm_mq_queue_rq;
-		 *   and __process_bio.
-		 */
-		md->immutable_target = dm_table_get_immutable_target(t);
-	}
+	md->immutable_target = dm_table_get_immutable_target(t);
 
 	ret = __bind_mempools(md, t);
 	if (ret) {
-- 
2.15.0

  parent reply	other threads:[~2019-02-20 21:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-20 21:44 [PATCH v2 0/9] dm: changes staged in linux-next for 5.1 so far Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 1/9] dm: update dm_process_bio() to split bio if in ->make_request_fn() Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 2/9] dm: eliminate 'split_discard_bios' flag from DM target interface Mike Snitzer
2019-02-21  4:36   ` Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 3/9] dm: refactor start_io_acct and end_io_acct Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 4/9] dm: implement noclone optimization for bio-based Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 5/9] dm: improve noclone bio support Mike Snitzer
2019-02-22 10:59   ` Mikulas Patocka
2019-02-22 15:22     ` Mike Snitzer
2019-02-22 16:56       ` Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 6/9] dm: add per-bio-data support to noclone bio Mike Snitzer
2019-02-20 21:44 ` Mike Snitzer [this message]
2019-02-20 21:44 ` [PATCH v2 8/9] dm mpath: enable noclone support for bio-based Mike Snitzer
2019-02-20 21:44 ` [PATCH v2 9/9] dm: remove unused _rq_tio_cache and _rq_cache Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190220214436.38476-8-snitzer@redhat.com \
    --to=snitzer@redhat.com \
    --cc=dm-devel@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox