Dell MD3200 - sd: Current: sense key: Illegal Request ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1

* Dell MD3200 - sd: Current: sense key: Illegal Request ASC=0x94 ASCQ=0x1ASC=0x94 ASCQ=0x1
@ 2011-02-28 19:52 Charles Slivkoff
  2011-03-02  3:35 ` Moger, Babu
  2011-03-02 18:52 ` Charles Slivkoff
  0 siblings, 2 replies; 11+ messages in thread
From: Charles Slivkoff @ 2011-02-28 19:52 UTC (permalink / raw)
  To: dm-devel

I have a MD3200 setup with multipathd running RHEL 5.5.

The array is split into 2 virtual disk, each assigned to one of the RAID 
controllers.

I believe I have the drivers setup properly, including scsi_dh_rdac.

multipath.conf has been customized by the Dell software install as follows:

blacklist {
         device {
                 vendor  "*"
                 product "Universal Xport"
         }
}
defaults {
         user_friendly_names yes
         max_fds             8192
}
devices {
         device {
                 vendor                "DELL"
                 product               "MD32xxi"
                 path_grouping_policy  group_by_prio
                 prio                  rdac
                 polling_interval      5
                 path_checker          rdac
                 path-selector         "round-robin 0"
                 hardware_handler      "1 rdac"
                 failback              immediate
                 features              "2 pg_init_retries 50"
                 no_path_retry         30
                 rr_min_io             100
                 prio_callout          "/sbin/mpath_prio_rdac /dev/%n"
         }
         device {
                 vendor                "DELL"
                 product               "MD32xx"
                 path_grouping_policy  group_by_prio
                 prio                  rdac
                 polling_interval      5
                 path_checker          rdac
                 path-selector         "round-robin 0"
                 hardware_handler      "1 rdac"
                 failback              immediate
                 features              "2 pg_init_retries 50"
                 no_path_retry         30
                 rr_min_io             100
                 prio_callout          "/sbin/mpath_prio_rdac /dev/%n"
         }
}

$ multipath -ll mpath8
mpath8 (36842b2b000528f62000005e04d25d3e7) dm-4 DELL,MD32xx
[size=20T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 
rdac][rw]
\_ round-robin 0 [prio=100][active]
  \_ 2:0:0:1  sdf 8:80  [active][ready]
\_ round-robin 0 [prio=0][enabled]
  \_ 1:0:0:1  sdc 8:32  [active][ghost]

$ multipath -ll mpath9
mpath9 (36842b2b0005294f9000005da4d25d3fb) dm-5 DELL,MD32xx
[size=20T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 
rdac][rw]
\_ round-robin 0 [prio=100][active]
  \_ 1:0:0:2  sdd 8:48  [active][ready]
\_ round-robin 0 [prio=0][enabled]
  \_ 2:0:0:2  sdg 8:96  [active][ghost]

I have LVM striping extents between these two disks. There are 4 10T 
lvols, for example:

$ lvdisplay -m /dev/rmane/d01
   --- Logical volume ---
   LV Name                /dev/rmane/d01
   VG Name                rmane
   LV UUID                6sQcuN-AaG7-EaIN-njz1-LHfB-LlWk-SOfZZE
   LV Write Access        read/write
   LV Status              available
   # open                 1
   LV Size                10.00 TB
   Current LE             1311210
   Segments               1
   Allocation             inherit
   Read ahead sectors     auto
   - currently set to     65536
   Block device           253:8

   --- Segments ---
   Logical extent 0 to 1311209:
     Type                striped
     Stripes             2
     Stripe size         8192 KB
     Stripe 0:
       Physical volume   /dev/dm-4
       Physical extents  1311210 to 1966814
     Stripe 1:
       Physical volume   /dev/dm-5
       Physical extents  1311210 to 1966814

I am using ext4 in each of the 4 lvols.

Today, I have started coping some data (about 200GB) to one of these 
volumes (via rsync) and I've noticed a large number of errors from the 
kernel:

Feb 28 14:24:20 rman-ss-03 kernel: FAILED
Feb 28 14:24:20 rman-ss-03 kernel:   status = 1, message = 00, host = 0, 
driver = 08
Feb 28 14:24:20 rman-ss-03 kernel:   <6>sd: Current: sense key: Illegal 
Request
Feb 28 14:24:20 rman-ss-03 kernel:     <<vendor>> ASC=0x94 
ASCQ=0x1ASC=0x94 ASCQ=0x1

These are repeating every 1-2 seconds (a total of 2526 times) during the 
111 minutes it took to complete the copy.

My best efforts of researching this error have lead me to this thread:

https://www.redhat.com/archives/dm-devel/2009-September/msg00311.html

I don't have any issues during boot and I'm not sure where to go from here.

Any suggestions would be appreciated.

Thanks,

-Charles

^ permalink raw reply	[flat|nested] 11+ messages in thread