[v3,3/6] dt-bindings: fsl-qdma: add device tree for qDMA driver

[v3,3/6] dt-bindings: fsl-qdma: add device tree for qDMA driver

[Rob Herring]

On Thu, Jan 11, 2018 at 05:32:12PM +0800, Wen He wrote:
> add NXP Layerscape queue direct memory access controller(qDMA) support.
> This module can be found on NXP QorIQ Layerscape Socs.
> 
> Signed-off-by: Wen He <wen.he_1@nxp.com>
> ---
> change in v3:
> 	- no change
> 
> change in v2:
> 	- Remove indentation
> 	- Add "Should be" before 'fsl,ls1021a-qdma'
> 	- Replace 'channels' by 'dma-channels'
> 	- Replace 'qdma@8390000' by 'dma-controller@8390000'
> 
>  Documentation/devicetree/bindings/dma/fsl-qdma.txt |   40 ++++++++++++++++++++
>  1 files changed, 40 insertions(+), 0 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
> new file mode 100644
> index 0000000..000472b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
> @@ -0,0 +1,40 @@
> +* NXP Layerscape queue Direct Memory Access Controller(qDMA) Controller
> +
> +The qDMA controller transfers blocks of data between one source and one or more
> +destinations. The blocks of data transferred can be represented in memory as contiguous
> +or non-contiguous using scatter/gather table(s). Channel virtualization is supported
> +through enqueuing of DMA jobs to, or dequeuing DMA jobs from, different work
> +queues.
> +
> +* qDMA Controller
> +Required properties:
> +- compatible : Should be "fsl,ls1021a-qdma" or "fsl,ls1043a-qdma", "fsl,ls1021a-qdma"

Please format exactly as I showed in v1.

> +- reg : Specifies base physical address(s) and size of the qDMA registers.
> +	The region is qDMA control register's address and size.
> +- interrupts : A list of interrupt-specifiers, one for each entry in
> +	interrupt-names.
> +- interrupt-names : Should contain:
> +	"qdma-error" - the error interrupt
> +	"qdma-queue" - the queue interrupt
> +- dma-channels : Number of DMA channels supported by the controller
> +- queues : Number of queues supported by driver
> +
> +Optional properties:
> +- big-endian: If present registers and hardware scatter/gather descriptors
> +	of the qDMA are implemented in big endian mode, otherwise in little
> +	mode.
> +
> +
> +Examples:
> +
> +	qdma: dma-controller@8390000 {
> +		compatible = "fsl,ls1021a-qdma";
> +		reg = <0x0 0x8398000 0x0 0x2000 /* Controller registers */
> +		       0x0 0x839a000 0x0 0x2000>; /* Block registers */
> +		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
> +				<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "qdma-error", "qdma-queue";
> +		dma-channels = <8>;
> +		queues = <2>;
> +		big-endian;
> +	};
> -- 
> 1.7.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
---
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[v3,3/6] dt-bindings: fsl-qdma: add device tree for qDMA driver

[Wen He]

add NXP Layerscape queue direct memory access controller(qDMA) support.
This module can be found on NXP QorIQ Layerscape Socs.

Signed-off-by: Wen He <wen.he_1@nxp.com>
---
change in v3:
	- no change

change in v2:
	- Remove indentation
	- Add "Should be" before 'fsl,ls1021a-qdma'
	- Replace 'channels' by 'dma-channels'
	- Replace 'qdma@8390000' by 'dma-controller@8390000'

 Documentation/devicetree/bindings/dma/fsl-qdma.txt |   40 ++++++++++++++++++++
 1 files changed, 40 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/dma/fsl-qdma.txt

diff --git a/Documentation/devicetree/bindings/dma/fsl-qdma.txt b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
new file mode 100644
index 0000000..000472b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl-qdma.txt
@@ -0,0 +1,40 @@
+* NXP Layerscape queue Direct Memory Access Controller(qDMA) Controller
+
+The qDMA controller transfers blocks of data between one source and one or more
+destinations. The blocks of data transferred can be represented in memory as contiguous
+or non-contiguous using scatter/gather table(s). Channel virtualization is supported
+through enqueuing of DMA jobs to, or dequeuing DMA jobs from, different work
+queues.
+
+* qDMA Controller
+Required properties:
+- compatible : Should be "fsl,ls1021a-qdma" or "fsl,ls1043a-qdma", "fsl,ls1021a-qdma"
+- reg : Specifies base physical address(s) and size of the qDMA registers.
+	The region is qDMA control register's address and size.
+- interrupts : A list of interrupt-specifiers, one for each entry in
+	interrupt-names.
+- interrupt-names : Should contain:
+	"qdma-error" - the error interrupt
+	"qdma-queue" - the queue interrupt
+- dma-channels : Number of DMA channels supported by the controller
+- queues : Number of queues supported by driver
+
+Optional properties:
+- big-endian: If present registers and hardware scatter/gather descriptors
+	of the qDMA are implemented in big endian mode, otherwise in little
+	mode.
+
+
+Examples:
+
+	qdma: dma-controller@8390000 {
+		compatible = "fsl,ls1021a-qdma";
+		reg = <0x0 0x8398000 0x0 0x2000 /* Controller registers */
+		       0x0 0x839a000 0x0 0x2000>; /* Block registers */
+		interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "qdma-error", "qdma-queue";
+		dma-channels = <8>;
+		queues = <2>;
+		big-endian;
+	};