From: Vinod Koul <vkoul@kernel.org>
To: Peng Ma <peng.ma@nxp.com>
Cc: dan.j.williams@intel.com, leoyang.li@nxp.com,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: dmaengine: fsl-qdma: fixed the source/destination descriptior format
Date: Fri, 26 Apr 2019 17:20:47 +0530 [thread overview]
Message-ID: <20190426115047.GW28103@vkoul-mobl> (raw)
On 19-04-19, 08:46, Peng Ma wrote:
> CMD of Source/Destination descriptior format should be lower of
s/descriptior/descriptor
> struct fsl_qdma_engine number data address.
>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> ---
> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
> 1 files changed, 18 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
> index aa1d0ae..542765a 100644
> --- a/drivers/dma/fsl-qdma.c
> +++ b/drivers/dma/fsl-qdma.c
> @@ -113,6 +113,7 @@
> /* Field definition for Descriptor offset */
> #define QDMA_CCDF_STATUS 20
> #define QDMA_CCDF_OFFSET 20
> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
>
> /* Field definition for safe loop count*/
> #define FSL_QDMA_HALT_COUNT 1500
> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
>
> };
>
> +static inline void
> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val)
> +{
> + sddf->data = QDMA_SDDF_CMD(val);
> +}
> +
> static inline u64
> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf)
> {
> @@ -341,6 +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
> static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> dma_addr_t dst, dma_addr_t src, u32 len)
> {
> + u32 cmd;
> struct fsl_qdma_format *sdf, *ddf;
> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
>
> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
>
> memset(fsl_comp->virt_addr, 0, FSL_QDMA_COMMAND_BUFFER_SIZE);
> memset(fsl_comp->desc_virt_addr, 0, FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
> +
> /* Head Command Descriptor(Frame Descriptor) */
> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf));
> @@ -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> /* This entry is the last entry. */
> qdma_csgf_set_f(csgf_dest, len);
> /* Descriptor Buffer */
> - sdf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data |=
> - cpu_to_le64(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + qdma_sddf_set_cmd(sdf, cmd);
> +
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + qdma_sddf_set_cmd(ddf, cmd);
> }
>
> /*
> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)
>
> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
>
> - if (intr) {
> + if (intr)
> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
> - return IRQ_NONE;
> - }
this seems unrelated can you explain?
>
> qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
> return IRQ_HANDLED;
> --
> 1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Peng Ma <peng.ma@nxp.com>
Cc: dan.j.williams@intel.com, leoyang.li@nxp.com,
dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] dmaengine: fsl-qdma: fixed the source/destination descriptior format
Date: Fri, 26 Apr 2019 17:20:47 +0530 [thread overview]
Message-ID: <20190426115047.GW28103@vkoul-mobl> (raw)
Message-ID: <20190426115047.6j7Fo-zoXV5BF37nrjadWsnyzWqLCFYKT87HLty-1Ik@z> (raw)
In-Reply-To: <20190419084629.41742-1-peng.ma@nxp.com>
On 19-04-19, 08:46, Peng Ma wrote:
> CMD of Source/Destination descriptior format should be lower of
s/descriptior/descriptor
> struct fsl_qdma_engine number data address.
>
> Signed-off-by: Peng Ma <peng.ma@nxp.com>
> ---
> drivers/dma/fsl-qdma.c | 29 ++++++++++++++++++-----------
> 1 files changed, 18 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/dma/fsl-qdma.c b/drivers/dma/fsl-qdma.c
> index aa1d0ae..542765a 100644
> --- a/drivers/dma/fsl-qdma.c
> +++ b/drivers/dma/fsl-qdma.c
> @@ -113,6 +113,7 @@
> /* Field definition for Descriptor offset */
> #define QDMA_CCDF_STATUS 20
> #define QDMA_CCDF_OFFSET 20
> +#define QDMA_SDDF_CMD(x) (((u64)(x)) << 32)
>
> /* Field definition for safe loop count*/
> #define FSL_QDMA_HALT_COUNT 1500
> @@ -214,6 +215,12 @@ struct fsl_qdma_engine {
>
> };
>
> +static inline void
> +qdma_sddf_set_cmd(struct fsl_qdma_format *sddf, u32 val)
> +{
> + sddf->data = QDMA_SDDF_CMD(val);
> +}
> +
> static inline u64
> qdma_ccdf_addr_get64(const struct fsl_qdma_format *ccdf)
> {
> @@ -341,6 +348,7 @@ static void fsl_qdma_free_chan_resources(struct dma_chan *chan)
> static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> dma_addr_t dst, dma_addr_t src, u32 len)
> {
> + u32 cmd;
> struct fsl_qdma_format *sdf, *ddf;
> struct fsl_qdma_format *ccdf, *csgf_desc, *csgf_src, *csgf_dest;
>
> @@ -353,6 +361,7 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
>
> memset(fsl_comp->virt_addr, 0, FSL_QDMA_COMMAND_BUFFER_SIZE);
> memset(fsl_comp->desc_virt_addr, 0, FSL_QDMA_DESCRIPTOR_BUFFER_SIZE);
> +
> /* Head Command Descriptor(Frame Descriptor) */
> qdma_desc_addr_set64(ccdf, fsl_comp->bus_addr + 16);
> qdma_ccdf_set_format(ccdf, qdma_ccdf_get_offset(ccdf));
> @@ -369,14 +378,14 @@ static void fsl_qdma_comp_fill_memcpy(struct fsl_qdma_comp *fsl_comp,
> /* This entry is the last entry. */
> qdma_csgf_set_f(csgf_dest, len);
> /* Descriptor Buffer */
> - sdf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data =
> - cpu_to_le64(FSL_QDMA_CMD_RWTTYPE <<
> - FSL_QDMA_CMD_RWTTYPE_OFFSET);
> - ddf->data |=
> - cpu_to_le64(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + qdma_sddf_set_cmd(sdf, cmd);
> +
> + cmd = cpu_to_le32(FSL_QDMA_CMD_RWTTYPE <<
> + FSL_QDMA_CMD_RWTTYPE_OFFSET);
> + cmd |= cpu_to_le32(FSL_QDMA_CMD_LWC << FSL_QDMA_CMD_LWC_OFFSET);
> + qdma_sddf_set_cmd(ddf, cmd);
> }
>
> /*
> @@ -701,10 +710,8 @@ static irqreturn_t fsl_qdma_error_handler(int irq, void *dev_id)
>
> intr = qdma_readl(fsl_qdma, status + FSL_QDMA_DEDR);
>
> - if (intr) {
> + if (intr)
> dev_err(fsl_qdma->dma_dev.dev, "DMA transaction error!\n");
> - return IRQ_NONE;
> - }
this seems unrelated can you explain?
>
> qdma_writel(fsl_qdma, FSL_QDMA_DEDR_CLEAR, status + FSL_QDMA_DEDR);
> return IRQ_HANDLED;
> --
> 1.7.1
--
~Vinod
next prev reply other threads:[~2019-04-26 11:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-19 8:46 dmaengine: fsl-qdma: fixed the source/destination descriptior format Peng Ma
2019-04-19 8:46 ` [PATCH] " Peng Ma
2019-04-26 11:50 ` Vinod Koul [this message]
2019-04-26 11:50 ` Vinod Koul
2019-04-28 2:00 ` Peng Ma
2019-04-28 2:00 ` [EXT] Re: [PATCH] " Peng Ma
2019-04-29 5:15 ` Vinod Koul
2019-04-29 5:15 ` [EXT] Re: [PATCH] " Vinod Koul
2019-04-29 6:28 ` Peng Ma
2019-04-29 6:28 ` [EXT] Re: [PATCH] " Peng Ma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190426115047.GW28103@vkoul-mobl \
--to=vkoul@kernel.org \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peng.ma@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox