From: Fenghua Yu <fenghua.yu@intel.com>
To: "Vinod Koul" <vkoul@kernel.org>, "Dave Jiang" <dave.jiang@intel.com>
Cc: "linux-kernel" <linux-kernel@vger.kernel.org>,
dmaengine@vger.kernel.org, Fenghua Yu <fenghua.yu@intel.com>
Subject: [PATCH 1/5] dmaengine: idxd: convert ats_dis to a wq flag
Date: Sat, 17 Sep 2022 09:12:18 -0700 [thread overview]
Message-ID: <20220917161222.2835172-2-fenghua.yu@intel.com> (raw)
In-Reply-To: <20220917161222.2835172-1-fenghua.yu@intel.com>
From: Dave Jiang <dave.jiang@intel.com>
Make wq attributes access consistent. Convert ats_dis to wq flag
WQ_FLAG_ATS_DISABLE.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
---
drivers/dma/idxd/device.c | 4 ++--
drivers/dma/idxd/idxd.h | 2 +-
drivers/dma/idxd/sysfs.c | 7 +++++--
3 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 5a8cc52c1abf..bbc3c8b9a10f 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -382,10 +382,10 @@ static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
wq->type = IDXD_WQT_NONE;
wq->threshold = 0;
wq->priority = 0;
- wq->ats_dis = 0;
wq->enqcmds_retries = IDXD_ENQCMDS_RETRIES;
clear_bit(WQ_FLAG_DEDICATED, &wq->flags);
clear_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags);
+ clear_bit(WQ_FLAG_ATS_DISABLE, &wq->flags);
memset(wq->name, 0, WQ_NAME_SIZE);
wq->max_xfer_bytes = WQ_DEFAULT_MAX_XFER;
wq->max_batch_size = WQ_DEFAULT_MAX_BATCH;
@@ -859,7 +859,7 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
wq->wqcfg->bof = 1;
if (idxd->hw.wq_cap.wq_ats_support)
- wq->wqcfg->wq_ats_disable = wq->ats_dis;
+ wq->wqcfg->wq_ats_disable = test_bit(WQ_FLAG_ATS_DISABLE, &wq->flags);
/* bytes 12-15 */
wq->wqcfg->max_xfer_shift = ilog2(wq->max_xfer_bytes);
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index fed0dfc1eaa8..cda856bfc22a 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -132,6 +132,7 @@ enum idxd_wq_state {
enum idxd_wq_flag {
WQ_FLAG_DEDICATED = 0,
WQ_FLAG_BLOCK_ON_FAULT,
+ WQ_FLAG_ATS_DISABLE,
};
enum idxd_wq_type {
@@ -208,7 +209,6 @@ struct idxd_wq {
char name[WQ_NAME_SIZE + 1];
u64 max_xfer_bytes;
u32 max_batch_size;
- bool ats_dis;
};
struct idxd_engine {
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 3f262a57441b..be9ff9d4cc4b 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -973,7 +973,7 @@ static ssize_t wq_ats_disable_show(struct device *dev, struct device_attribute *
{
struct idxd_wq *wq = confdev_to_wq(dev);
- return sysfs_emit(buf, "%u\n", wq->ats_dis);
+ return sysfs_emit(buf, "%u\n", test_bit(WQ_FLAG_ATS_DISABLE, &wq->flags));
}
static ssize_t wq_ats_disable_store(struct device *dev, struct device_attribute *attr,
@@ -994,7 +994,10 @@ static ssize_t wq_ats_disable_store(struct device *dev, struct device_attribute
if (rc < 0)
return rc;
- wq->ats_dis = ats_dis;
+ if (ats_dis)
+ set_bit(WQ_FLAG_ATS_DISABLE, &wq->flags);
+ else
+ clear_bit(WQ_FLAG_ATS_DISABLE, &wq->flags);
return count;
}
--
2.32.0
next prev parent reply other threads:[~2022-09-17 16:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-17 16:12 [PATCH 0/5] Enable a few DSA 2.0 features Fenghua Yu
2022-09-17 16:12 ` Fenghua Yu [this message]
2022-09-17 16:12 ` [PATCH 2/5] dmanegine: idxd: reformat opcap output to match bitmap_parse() input Fenghua Yu
2022-09-17 16:12 ` [PATCH 3/5] dmaengine: idxd: add WQ operation cap restriction support Fenghua Yu
2022-09-17 16:12 ` [PATCH 4/5] dmaengine: idxd: add configuration for concurrent work descriptor processing Fenghua Yu
2022-09-17 16:12 ` [PATCH 5/5] dmaengine: idxd: add configuration for concurrent batch " Fenghua Yu
2022-09-29 16:29 ` [PATCH 0/5] Enable a few DSA 2.0 features Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220917161222.2835172-2-fenghua.yu@intel.com \
--to=fenghua.yu@intel.com \
--cc=dave.jiang@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox