DMA Engine development
 help / color / mirror / Atom feed
From: Linus Walleij <linusw@kernel.org>
To: Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>
Cc: dmaengine@vger.kernel.org, phone-devel@vger.kernel.org,
	 Linus Walleij <linusw@kernel.org>,
	sashiko-bot@kernel.org
Subject: [PATCH v5 12/23] dmaengine: ste_dma40: Fix LCLA allocation order
Date: Sun, 20 Sep 2026 20:59:47 +0200	[thread overview]
Message-ID: <20260920-dma40-fixes-v5-12-5c55cd7f92f9@kernel.org> (raw)
In-Reply-To: <20260920-dma40-fixes-v5-0-5c55cd7f92f9@kernel.org>

d40_lcla_allocate() calculates the number of pages needed for LCLA, but
passes that raw page count as the allocation order to __get_free_pages().
The same value is later passed to free_pages().

Store the allocation order with get_order() instead, and use a separate
byte size for allocation diagnostics, fallback kmalloc() sizing and DMA
mapping.

Fixes: 508849ade23c ("DMAENGINE: ste_dma40: allocate LCLA dynamically")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225114.AE1511F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/dma/ste_dma40.c | 33 ++++++++++++++++-----------------
 1 file changed, 16 insertions(+), 17 deletions(-)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 52d39883da51..33cd93e90bc4 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -423,8 +423,8 @@ struct d40_desc {
  * @dma_addr: DMA address, if mapped
  * @base_unaligned: The original kmalloc pointer, if kmalloc is used.
  * This pointer is only there for clean-up on error.
- * @pages: The number of pages needed for all physical channels.
- * Only used later for clean-up on error
+ * @alloc_order: Order used for the LCLA page allocation.
+ * Only used later for clean-up on error.
  * @lock: Lock to protect the content in this struct.
  * @alloc_map: big map over which LCLA entry is own by which job.
  */
@@ -432,7 +432,7 @@ struct d40_lcla_pool {
 	void		*base;
 	dma_addr_t	dma_addr;
 	void		*base_unaligned;
-	int		 pages;
+	unsigned int	 alloc_order;
 	spinlock_t	 lock;
 	struct d40_desc	**alloc_map;
 };
@@ -3597,6 +3597,7 @@ static void __init d40_hw_init(struct d40_base *base)
 static int __init d40_lcla_allocate(struct d40_base *base)
 {
 	struct d40_lcla_pool *pool = &base->lcla_pool;
+	size_t lcla_size = SZ_1K * base->num_phy_chans;
 	unsigned long *page_list;
 	int i, j;
 	int ret;
@@ -3612,20 +3613,20 @@ static int __init d40_lcla_allocate(struct d40_base *base)
 	if (!page_list)
 		return -ENOMEM;
 
-	/* Calculating how many pages that are required */
-	base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
+	base->lcla_pool.alloc_order = get_order(lcla_size);
 
 	for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
 		page_list[i] = __get_free_pages(GFP_KERNEL,
-						base->lcla_pool.pages);
+						base->lcla_pool.alloc_order);
 		if (!page_list[i]) {
 
-			d40_err(base->dev, "Failed to allocate %d pages.\n",
-				base->lcla_pool.pages);
+			d40_err(base->dev, "Failed to allocate %zu bytes.\n",
+				lcla_size);
 			ret = -ENOMEM;
 
 			for (j = 0; j < i; j++)
-				free_pages(page_list[j], base->lcla_pool.pages);
+				free_pages(page_list[j],
+					   base->lcla_pool.alloc_order);
 			goto free_page_list;
 		}
 
@@ -3635,7 +3636,7 @@ static int __init d40_lcla_allocate(struct d40_base *base)
 	}
 
 	for (j = 0; j < i; j++)
-		free_pages(page_list[j], base->lcla_pool.pages);
+		free_pages(page_list[j], base->lcla_pool.alloc_order);
 
 	if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
 		base->lcla_pool.base = (void *)page_list[i];
@@ -3645,10 +3646,9 @@ static int __init d40_lcla_allocate(struct d40_base *base)
 		 * alignment, try with allocating a big buffer.
 		 */
 		dev_warn(base->dev,
-			 "[%s] Failed to get %d pages @ 18 bit align.\n",
-			 __func__, base->lcla_pool.pages);
-		base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
-							 base->num_phy_chans +
+			 "[%s] Failed to get %zu bytes @ 18 bit align.\n",
+			 __func__, lcla_size);
+		base->lcla_pool.base_unaligned = kmalloc(lcla_size +
 							 LCLA_ALIGNMENT,
 							 GFP_KERNEL);
 		if (!base->lcla_pool.base_unaligned) {
@@ -3660,8 +3660,7 @@ static int __init d40_lcla_allocate(struct d40_base *base)
 						 LCLA_ALIGNMENT);
 	}
 
-	pool->dma_addr = dma_map_single(base->dev, pool->base,
-					SZ_1K * base->num_phy_chans,
+	pool->dma_addr = dma_map_single(base->dev, pool->base, lcla_size,
 					DMA_TO_DEVICE);
 	if (dma_mapping_error(base->dev, pool->dma_addr)) {
 		pool->dma_addr = 0;
@@ -3905,7 +3904,7 @@ static int __init d40_probe(struct platform_device *pdev)
 
 	if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
 		free_pages((unsigned long)base->lcla_pool.base,
-			   base->lcla_pool.pages);
+			   base->lcla_pool.alloc_order);
 
 	kfree(base->lcla_pool.base_unaligned);
 

-- 
2.55.0


  parent reply	other threads:[~2026-09-20 19:00 UTC|newest]

Thread overview: 37+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-20 18:59 [PATCH v5 00/23] dmaengine: ste_dma40: Fix numerous accumulated bugs Linus Walleij
2026-09-20 18:59 ` [PATCH v5 01/23] dmaengine: ste_dma40: Fix physical cyclic capability Linus Walleij
2026-09-21 16:39   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 02/23] dmaengine: ste_dma40: Fix cyclic transfer residue Linus Walleij
2026-09-21 16:57   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 03/23] dmaengine: ste_dma40: Recover coalesced cyclic callbacks Linus Walleij
2026-09-21 21:51   ` Frank Li
2026-09-22 21:13     ` Linus Walleij
2026-09-20 18:59 ` [PATCH v5 04/23] dmaengine: ste_dma40: Fix failed start cleanup Linus Walleij
2026-09-21 22:10   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 05/23] dmaengine: ste_dma40: Fix probe runtime PM disable Linus Walleij
2026-09-21 22:16   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 06/23] dmaengine: ste_dma40: Check runtime PM in IRQ Linus Walleij
2026-09-21 22:19   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 07/23] dmaengine: ste_dma40: Handle runtime PM resume errors Linus Walleij
2026-09-22 19:23   ` Frank Li
2026-09-20 18:59 ` [PATCH v5 08/23] dmaengine: ste_dma40: Return IRQ_NONE without interrupt status Linus Walleij
2026-09-20 19:10   ` sashiko-bot
2026-09-20 21:26     ` Linus Walleij
2026-09-22 19:37   ` Frank Li
2026-09-22 23:17     ` Linus Walleij
2026-09-20 18:59 ` [PATCH v5 09/23] dmaengine: ste_dma40: Init hardware before registration Linus Walleij
2026-09-20 18:59 ` [PATCH v5 10/23] dmaengine: ste_dma40: Fix probe IRQ leak Linus Walleij
2026-09-20 18:59 ` [PATCH v5 11/23] dmaengine: ste_dma40: Fix DMA registration unwind Linus Walleij
2026-09-20 18:59 ` Linus Walleij [this message]
2026-09-20 18:59 ` [PATCH v5 13/23] dmaengine: ste_dma40: Fix probe LCLA free Linus Walleij
2026-09-20 18:59 ` [PATCH v5 14/23] dmaengine: ste_dma40: Put the LCPA SRAM node Linus Walleij
2026-09-20 18:59 ` [PATCH v5 15/23] dmaengine: ste_dma40: Fix memcpy channel parsing Linus Walleij
2026-09-20 18:59 ` [PATCH v5 16/23] dmaengine: ste_dma40: Validate disabled channel indexes Linus Walleij
2026-09-20 18:59 ` [PATCH v5 17/23] dmaengine: ste_dma40: Validate DMA specifier length Linus Walleij
2026-09-20 18:59 ` [PATCH v5 18/23] dmaengine: ste_dma40: Reject direction changes after allocation Linus Walleij
2026-09-20 18:59 ` [PATCH v5 19/23] dmaengine: ste_dma40: Fix logical channel bounds check Linus Walleij
2026-09-20 18:59 ` [PATCH v5 20/23] dmaengine: ste_dma40: Fix event group bounds Linus Walleij
2026-09-20 18:59 ` [PATCH v5 21/23] dmaengine: ste_dma40: Search all blocks for fixed logical channels Linus Walleij
2026-09-20 18:59 ` [PATCH v5 22/23] dmaengine: ste_dma40: Validate fixed physical channel indexes Linus Walleij
2026-09-20 18:59 ` [PATCH v5 23/23] dmaengine: ste_dma40: Validate memcpy configuration Linus Walleij
  -- strict thread matches above, loose matches on Subject: below --
2026-09-22 23:30 [PATCH v5 00/23] dmaengine: ste_dma40: Fix numerous accumulated bugs Linus Walleij
2026-09-22 23:30 ` [PATCH v5 12/23] dmaengine: ste_dma40: Fix LCLA allocation order Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260920-dma40-fixes-v5-12-5c55cd7f92f9@kernel.org \
    --to=linusw@kernel.org \
    --cc=Frank.Li@kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox