[PATCH v5 22/23] dmaengine: ste_dma40: Validate fixed physical channel indexes

[Linus Walleij <linusw@kernel.org>]

Fixed physical memcpy allocation uses dma_cfg.phy_channel directly as an
index into phy_res when use_fixed_channel is set. d40_validate_conf()
validates dev_type but not the fixed physical channel, allowing an invalid
configuration to access memory outside the array.

Validate the fixed physical channel centrally before accepting the channel
configuration.

Fixes: f000df8c5a0e ("dmaengine: ste_dma40: support fixed physical channel allocation")
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/dmaengine/20260819225008.5F9651F000E9@smtp.kernel.org/
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/dma/ste_dma40.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index 41c7561314c1..a3159a657040 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -1906,6 +1906,14 @@ static int d40_validate_conf(struct d40_chan *d40c,
 		res = -EINVAL;
 	}
 
+	if (conf->use_fixed_channel &&
+	    (conf->phy_channel < 0 ||
+	     conf->phy_channel >= d40c->base->num_phy_chans)) {
+		chan_err(d40c, "Invalid physical channel (%d)\n",
+			 conf->phy_channel);
+		res = -EINVAL;
+	}
+
 	if (conf->dir == DMA_DEV_TO_DEV) {
 		/*
 		 * DMAC HW supports it. Will be added to this driver,

-- 
2.55.0