From: Claudiu Beznea <claudiu.beznea@kernel.org>
To: vkoul@kernel.org, Frank.Li@kernel.org,
biju.das.jz@bp.renesas.com, geert+renesas@glider.be
Cc: claudiu.beznea@tuxon.dev, dmaengine@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>,
stable@vger.kernel.org,
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: [PATCH] dmaengine: sh: rz-dmac: Fix off-by-one in residue lmdesc lookup
Date: Tue, 22 Sep 2026 12:20:37 +0300 [thread overview]
Message-ID: <20260922092037.224884-1-claudiu.beznea@kernel.org> (raw)
From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
lmdesc->nxla is the address of the next descriptor, so comparing it
against CRLA, which is the address of the current descriptor,
finds the descriptor before the active one, not the active one.
The residue loops below then summed one lmdesc too many on top of
that.
Compare each descriptor's own address to CRLA instead, and add tb
after advancing to the next lmdesc.
Fixes: 21323b118c16 ("dmaengine: sh: rz-dmac: Add device_tx_status() callback")
Fixes: 172bfb57481c ("dmaengine: sh: rz-dmac: Add cyclic DMA support")
Cc: stable@vger.kernel.org
Suggested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
---
drivers/dma/sh/rz-dmac.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
index ca76f1bb45c4..fdd7131e890a 100644
--- a/drivers/dma/sh/rz-dmac.c
+++ b/drivers/dma/sh/rz-dmac.c
@@ -937,7 +937,7 @@ static u32 rz_dmac_calculate_residue_bytes_in_vd(struct rz_dmac_chan *channel,
struct rz_dmac *dmac = to_rz_dmac(chan->device);
u32 residue = 0, i = 0;
- while (lmdesc->nxla != crla) {
+ while (rz_dmac_lmdesc_addr(channel, lmdesc) != crla) {
lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
if (++i >= DMAC_NR_LMDESC)
return 0;
@@ -948,13 +948,13 @@ static u32 rz_dmac_calculate_residue_bytes_in_vd(struct rz_dmac_chan *channel,
u32 start_lmdesc_addr = rz_dmac_lmdesc_addr(channel, desc->start_lmdesc);
while (lmdesc->nxla != start_lmdesc_addr) {
- residue += lmdesc->tb;
lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
+ residue += lmdesc->tb;
}
} else {
while (lmdesc->chcfg & CHCFG_DEM) {
- residue += lmdesc->tb;
lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
+ residue += lmdesc->tb;
}
}
--
2.43.0
next reply other threads:[~2026-09-22 9:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-22 9:20 Claudiu Beznea [this message]
2026-09-24 21:17 ` [PATCH] dmaengine: sh: rz-dmac: Fix off-by-one in residue lmdesc lookup Frank Li
2026-10-05 15:43 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260922092037.224884-1-claudiu.beznea@kernel.org \
--to=claudiu.beznea@kernel.org \
--cc=Frank.Li@kernel.org \
--cc=biju.das.jz@bp.renesas.com \
--cc=claudiu.beznea.uj@bp.renesas.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=dmaengine@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tommaso.merciai.xr@bp.renesas.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox