DMA Engine development
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Claudiu Beznea <claudiu.beznea@kernel.org>
Cc: vkoul@kernel.org, Frank.Li@kernel.org,
	biju.das.jz@bp.renesas.com, geert+renesas@glider.be,
	claudiu.beznea@tuxon.dev, dmaengine@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>,
	stable@vger.kernel.org,
	Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Subject: Re: [PATCH] dmaengine: sh: rz-dmac: Fix off-by-one in residue lmdesc lookup
Date: Thu, 24 Sep 2026 17:17:42 -0400	[thread overview]
Message-ID: <arWTdpFikA2brWXq@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260922092037.224884-1-claudiu.beznea@kernel.org>

On Tue, Sep 22, 2026 at 12:20:37PM +0300, Claudiu Beznea wrote:
> From: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
>
> lmdesc->nxla is the address of the next descriptor, so comparing it
> against CRLA, which is the address of the current descriptor,
> finds the descriptor before the active one, not the active one.
> The residue loops below then summed one lmdesc too many on top of
> that.
>
> Compare each descriptor's own address to CRLA instead, and add tb
> after advancing to the next lmdesc.
>
> Fixes: 21323b118c16 ("dmaengine: sh: rz-dmac: Add device_tx_status() callback")
> Fixes: 172bfb57481c ("dmaengine: sh: rz-dmac: Add cyclic DMA support")
> Cc: stable@vger.kernel.org
> Suggested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/dma/sh/rz-dmac.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
> index ca76f1bb45c4..fdd7131e890a 100644
> --- a/drivers/dma/sh/rz-dmac.c
> +++ b/drivers/dma/sh/rz-dmac.c
> @@ -937,7 +937,7 @@ static u32 rz_dmac_calculate_residue_bytes_in_vd(struct rz_dmac_chan *channel,
>  	struct rz_dmac *dmac = to_rz_dmac(chan->device);
>  	u32 residue = 0, i = 0;
>
> -	while (lmdesc->nxla != crla) {
> +	while (rz_dmac_lmdesc_addr(channel, lmdesc) != crla) {
>  		lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
>  		if (++i >= DMAC_NR_LMDESC)
>  			return 0;
> @@ -948,13 +948,13 @@ static u32 rz_dmac_calculate_residue_bytes_in_vd(struct rz_dmac_chan *channel,
>  		u32 start_lmdesc_addr = rz_dmac_lmdesc_addr(channel, desc->start_lmdesc);
>
>  		while (lmdesc->nxla != start_lmdesc_addr) {
> -			residue += lmdesc->tb;
>  			lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
> +			residue += lmdesc->tb;
>  		}
>  	} else {
>  		while (lmdesc->chcfg & CHCFG_DEM) {
> -			residue += lmdesc->tb;
>  			lmdesc = rz_dmac_get_next_lmdesc(channel->lmdesc.base, lmdesc);
> +			residue += lmdesc->tb;
>  		}
>  	}
>
> --
> 2.43.0
>

  reply	other threads:[~2026-09-24 21:17 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-22  9:20 [PATCH] dmaengine: sh: rz-dmac: Fix off-by-one in residue lmdesc lookup Claudiu Beznea
2026-09-24 21:17 ` Frank Li [this message]
2026-10-05 15:43 ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=arWTdpFikA2brWXq@lizhi-Precision-Tower-5810 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=claudiu.beznea.uj@bp.renesas.com \
    --cc=claudiu.beznea@kernel.org \
    --cc=claudiu.beznea@tuxon.dev \
    --cc=dmaengine@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tommaso.merciai.xr@bp.renesas.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox