messages from 2019-02-14 17:58:42 to 2019-04-08 08:13:58 UTC [more...]
[v2] mfd: intel-lpss: Set the device in reset state when init
2019-04-08 8:09 UTC (2+ messages)
` [PATCH v2] "
intel-lpss: Set the device in reset state when init
2019-04-08 8:05 UTC (6+ messages)
` [PATCH] "
dmaengine: bcm2835: Drop duplicate capability setting
2019-04-05 7:07 UTC
dmaengine: bcm2835: Drop duplicate capability setting
2019-04-04 17:25 UTC
Issues with i.MX SPI DMA transfers
2019-04-03 17:13 UTC
Issues with i.MX SPI DMA transfers
2019-04-03 15:51 UTC
dmaengine: pl330: _stop: clear interrupt status
2019-04-03 11:06 UTC
[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-04-03 11:00 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-04-03 10:59 UTC
[v3,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
2019-04-03 10:23 UTC
[v3,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:23 UTC
[v3,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-03 10:23 UTC
[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-03 10:22 UTC
[v2,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
2019-04-03 10:09 UTC
[v2,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:09 UTC
[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-03 10:09 UTC
[2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:05 UTC
Issues with i.MX SPI DMA transfers
2019-04-03 7:38 UTC
Issues with i.MX SPI DMA transfers
2019-04-02 12:15 UTC
[RFC] dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
2019-04-01 18:38 UTC
[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
2019-04-01 12:47 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-30 16:55 UTC
[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-03-29 15:21 UTC
[v2,2/3] dmaengine: imx-sdma: Only check ratio on parts that support 1:1
2019-03-29 15:21 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 15:21 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 14:09 UTC
dma: ti: fix a missing check in omap_dma_prep_dma_cyclic
2019-03-29 13:21 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 11:20 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 9:10 UTC
[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
2019-03-28 22:52 UTC
[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
2019-03-28 15:18 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-28 14:56 UTC
[4/4] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-03-28 13:38 UTC
[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
2019-03-28 13:38 UTC
[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
2019-03-28 13:38 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-28 13:38 UTC
[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
2019-03-27 23:47 UTC
dmaengine: stm32-dma: fix residue calculation in stm32-dma
2019-03-27 12:21 UTC
[V2,RESEND] dmaengine: axi-dmac: Enable DMA_INTERLEAVE capability
2019-03-26 14:07 UTC
[V3] dmaengine: axi-dmac: Don't check the number of frames for alignment
2019-03-26 14:05 UTC
dmaengine: axi-dmac: Infer synthesis configuration parameters hardware
2019-03-26 13:06 UTC
[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
2019-03-26 8:55 UTC
[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-26 2:10 UTC
[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
2019-03-25 16:28 UTC
[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
2019-03-25 16:21 UTC
[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
2019-03-25 16:17 UTC
[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
2019-03-25 15:25 UTC
[v1] Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
2019-03-25 14:46 UTC
dmaengine: pl08x: be fair when re-assigning physical channel
2019-03-25 8:15 UTC
dmaengine: axi-dmac: extend support for ZynqMP arch
2019-03-25 5:54 UTC
dma:xgene-dma:move spin_lock_bh to spin_lock in tasklet
2019-03-25 5:52 UTC
dmaengine: pl08x: be fair when re-assigning physical channel
2019-03-25 5:13 UTC
[V4] dmaengine: axi-dmac: Split too large segments
2019-03-25 5:04 UTC
[v2] dmaengine: pl330: introduce debugfs interface
2019-03-25 4:58 UTC
[3/3] dmaengine: edma: make edma_filter_fn private
2019-03-25 4:56 UTC
[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
2019-03-25 4:56 UTC
[v3,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-25 4:54 UTC
[2/2] dmaengine: milbeaut: Add Milbeaut AXI DMA controller
2019-03-25 4:15 UTC
[1/2] dt-bindings: dmaengine: Add Milbeaut AXI DMA controller bindings
2019-03-25 4:15 UTC
dma: ti: fix a missing check in omap_dma_prep_dma_cyclic
2019-03-23 22:39 UTC
[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-22 13:20 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-22 13:03 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-22 12:59 UTC
[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-22 3:36 UTC
[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-22 3:31 UTC
[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-22 3:10 UTC
[1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-22 3:05 UTC
[v1] dmaengine: idma64: Use actual device for DMA transfers
2019-03-21 14:18 UTC
dma:xgene-dma:move spin_lock_bh to spin_lock in tasklet
2019-03-19 16:45 UTC
[v1] dmaengine: idma64: Use actual device for DMA transfers
2019-03-19 14:25 UTC
[v1] dmaengine: idma64: Use actual device for DMA transfers
2019-03-19 12:57 UTC
[v1] dmaengine: idma64: Use actual device for DMA transfers
2019-03-18 15:39 UTC
[v2] dmaengine: pl330: introduce debugfs interface
2019-03-17 10:03 UTC
dmaengine: pl330: introduce debugfs interface
2019-03-17 10:02 UTC
dmaengine: pl330: introduce debugfs interface
2019-03-17 10:00 UTC
dmaengine: pl330: introduce debugfs interface
2019-03-17 9:58 UTC
[5/6] dmaengine: sun6i: Add support for H6 DMA
2019-03-16 11:37 UTC
[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
2019-03-16 11:27 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-16 11:23 UTC
[5/6] dmaengine: sun6i: Add support for H6 DMA
2019-03-16 11:13 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-16 11:07 UTC
[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
2019-03-16 10:57 UTC
dmaengine: pl330: introduce debugfs interface
2019-03-15 17:00 UTC
dmaengine: pl330: introduce debugfs interface
2019-03-14 18:49 UTC
[v3,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 12:11 UTC
[v3,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 11:32 UTC
[v3,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-13 11:32 UTC
[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 10:56 UTC
[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 10:49 UTC
[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 10:40 UTC
[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 10:28 UTC
[v2,2/2] dmaengine: tegra210-adma: update system sleep callbacks
2019-03-13 5:43 UTC
[v2,1/2] dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-13 5:43 UTC
dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-12 15:24 UTC
dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-12 14:35 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-11 5:47 UTC
[v11,1/4] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-03-11 0:31 UTC
[v11,1/4] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-03-10 11:15 UTC
[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
2019-03-08 14:32 UTC
[3/3] dmaengine: edma: make edma_filter_fn private
2019-03-08 14:32 UTC
[V4] dmaengine: axi-dmac: Split too large segments
2019-03-08 13:02 UTC
dmaengine: axi-dmac: Split too large segments
2019-03-08 12:58 UTC
[6/6] arm64: dts: allwinner: h6: Add DMA node
2019-03-07 16:58 UTC
[5/6] dmaengine: sun6i: Add support for H6 DMA
2019-03-07 16:58 UTC
[4/6] dmaengine: sun6i: Add a quirk for setting mode fields
2019-03-07 16:58 UTC
[3/6] dmaengine: sun6i: Add a quirk for setting DRQ fields
2019-03-07 16:58 UTC
[2/6] dmaengine: sun6i: Add a quirk for additional mbus clock
2019-03-07 16:58 UTC
[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
2019-03-07 16:58 UTC
[3/3] dmaengine: edma: make edma_filter_fn private
2019-03-07 15:16 UTC
[2/3] dmaengine: omap-dma: make omap_dma_filter_fn private
2019-03-07 15:16 UTC
[1/3] ASoC: ti: remove compat dma probing
2019-03-07 15:16 UTC
[v11,4/4] serial: 8250-mtk: modify uart DMA rx
2019-03-07 1:45 UTC
[v11,3/4] dt-bindings: dma: uart: rename binding
2019-03-07 1:45 UTC
[v11,2/4] arm: dts: mt2712: add uart APDMA to device tree
2019-03-07 1:45 UTC
[v11,1/4] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-03-07 1:45 UTC
[3/3] irqchip/gic-pm: use devm_clk_*() helpers
2019-03-06 13:21 UTC
[V3] dmaengine: axi-dmac: Split too large segments
2019-03-06 12:21 UTC
[V2] dmaengine: axi-dmac: Split too large segments
2019-03-06 12:21 UTC
[3/3] irqchip/gic-pm: use devm_clk_*() helpers
2019-03-06 12:00 UTC
[3/3] irqchip/gic-pm: use devm_clk_*() helpers
2019-03-06 11:31 UTC
[3/3] irqchip/gic-pm: use devm_clk_*() helpers
2019-03-06 10:41 UTC
[2/3] dmaengine: tegra210-adma: use devm_clk_*() helpers
2019-03-06 10:41 UTC
[1/3] bus: tegra-aconnect: use devm_clk_*() helpers
2019-03-06 10:41 UTC
[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
2019-03-05 5:56 UTC
[v2,1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
2019-03-05 5:56 UTC
[v2,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
2019-03-04 17:21 UTC
dmaengine: pl08x: be fair when re-assigning physical channel
2019-03-04 15:03 UTC
[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
2019-03-04 10:37 UTC
[v2,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
2019-03-04 9:10 UTC
[v2,1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
2019-03-04 9:10 UTC
[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
2019-03-04 7:56 UTC
[1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
2019-03-04 7:56 UTC
dmaengine: axi-dmac: extend support for ZynqMP arch
2019-02-28 12:39 UTC
[V2] dmaengine: axi-dmac: Split too large segments
2019-02-28 12:37 UTC
[V2] dmaengine: axi-dmac: assign `copy_align` property
2019-02-27 10:55 UTC
[V2] dmaengine: axi-dmac: assign `copy_align` property
2019-02-27 8:12 UTC
[V2] dmaengine: axi-dmac: assign `copy_align` property
2019-02-26 17:43 UTC
[V2] dmaengine: axi-dmac: assign `copy_align` property
2019-02-26 8:52 UTC
[V2] dmaengine: axi-dmac: don't check the number of frames for alignment
2019-02-26 8:48 UTC
[1/2] dma: axi-dmac: don't check the number of frames for alignment
2019-02-26 8:36 UTC
dma: axi-dmac: assign `copy_align` property
2019-02-26 8:03 UTC
[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
2019-02-26 8:02 UTC
[1/2] dma: axi-dmac: don't check the number of frames for alignment
2019-02-26 8:01 UTC
[V2] dmaengine: axi-dmac: report DMA_INTERLEAVE capability
2019-02-26 7:35 UTC
dma: axi-dmac: assign `copy_align` property
2019-02-26 7:19 UTC
[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
2019-02-26 7:15 UTC
[1/2] dma: axi-dmac: don't check the number of frames for alignment
2019-02-26 7:14 UTC
[V2,1/3] dmaengine: dmatest: wrap src & dst data into a struct
2019-02-25 17:44 UTC
[v6,2/3] dmaengine: imx-sdma: add a test for imx8mq multi sdma devices
2019-02-25 13:31 UTC
dma: axi-dmac: Split too large segments
2019-02-25 6:56 UTC
dma: axi-dmac: assign `copy_align` property
2019-02-25 6:55 UTC
[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
2019-02-25 6:53 UTC
[1/2] dma: axi-dmac: don't check the number of frames for alignment
2019-02-25 6:52 UTC
[v2,1/2] dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
2019-02-25 6:41 UTC
[v2,1/2] dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
2019-02-22 20:42 UTC
[3/3] imx8mq.dtsi: add the sdma nodes
2019-02-22 19:44 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2019-02-22 18:10 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2019-02-22 17:23 UTC
[4/4] dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4
2019-02-22 17:00 UTC
[3/4] dmaengine: ioatdma: add descriptor pre-fetch support for v3.4
2019-02-22 17:00 UTC
[2/4] dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4
2019-02-22 16:59 UTC
[1/4] dmaengine: ioatdma: Add Snow Ridge ioatdma device id
2019-02-22 16:59 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2019-02-21 13:02 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2019-02-21 10:06 UTC
[v2,2/2] dmaengine: sprd: Change channel id to slave id for DMA cell specifier
2019-02-21 5:34 UTC
[v2,1/2] dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier
2019-02-21 5:34 UTC
[4/6] dma: tegra: add accurate reporting of dma state
2019-02-21 0:41 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-20 11:29 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-20 9:07 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-20 3:12 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-19 12:20 UTC
[v10,1/3] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-02-19 12:14 UTC
dmaengine: mv_xor: Use correct device for DMA API
2019-02-19 12:10 UTC
dmaengine: mv_xor: Use correct device for DMA API
2019-02-19 11:02 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-19 9:49 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-19 9:30 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-19 3:14 UTC
dmaengine: mv_xor: Use correct device for DMA API
2019-02-18 18:27 UTC
[RFC,v5,1/6] dmaengine: Add Synopsys eDMA IP core driver
2019-02-18 15:44 UTC
[1/1] dt-bindings: dmaengine: Add MediaTek Command-Queue DMA controller bindings
2019-02-18 14:47 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-18 12:23 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-18 10:52 UTC
[1/3] dt-bindings: dmaengine: Add one new cell to present hardware slave id
2019-02-18 10:31 UTC
dma: axi-dmac: Split too large segments
2019-02-18 7:34 UTC
dma: axi-dmac: Split too large segments
2019-02-18 7:28 UTC
dma: axi-dmac: Split too large segments
2019-02-16 10:08 UTC
ARM64 boot failure on espressobin with 5.0.0-rc6 (1f947a7a011fcceb14cb912f5481a53b18f1879a)
2019-02-15 16:05 UTC
ARM64 boot failure on espressobin with 5.0.0-rc6 (1f947a7a011fcceb14cb912f5481a53b18f1879a)
2019-02-15 15:22 UTC
dma: axi-dmac: Split too large segments
2019-02-15 11:06 UTC
dma: axi-dmac: assign `copy_align` property
2019-02-15 11:02 UTC
[2/2] dma: axi-dmac: report DMA_INTERLEAVE capability
2019-02-15 9:17 UTC
[1/2] dma: axi-dmac: don't check the number of frames for alignment
2019-02-15 9:17 UTC
ARM64 boot failure on espressobin with 5.0.0-rc6 (1f947a7a011fcceb14cb912f5481a53b18f1879a)
2019-02-14 18:11 UTC
ARM64 boot failure on espressobin with 5.0.0-rc6 (1f947a7a011fcceb14cb912f5481a53b18f1879a)
2019-02-14 17:58 UTC
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).