* Re: [PATCH v3 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format
2022-04-17 21:04 ` [PATCH v3 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format Kuldeep Singh
@ 2022-04-26 0:16 ` Rob Herring
2022-07-21 19:52 ` Rob Herring
1 sibling, 0 replies; 4+ messages in thread
From: Rob Herring @ 2022-04-26 0:16 UTC (permalink / raw)
To: Kuldeep Singh
Cc: Krzysztof Kozlowski, Andy Gross, Bjorn Andersson, Vinod Koul,
linux-kernel, devicetree, linux-arm-msm, dmaengine
On Mon, Apr 18, 2022 at 02:34:36AM +0530, Kuldeep Singh wrote:
> Convert Qualcomm BAM DMA controller binding to DT schema format using
> json schema.
>
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
> v3:
> - Address Krzysztof Comments
> - qcom,ee as required property
> - Use boolean type instead of flag
> - Add min/max to qcom,ee
> - skip clocks, as it's users are not fixed
> ---
> v2:
> - Use dma-cells
> - Set additionalProperties to false
> ---
> .../devicetree/bindings/dma/qcom,bam-dma.yaml | 97 +++++++++++++++++++
> .../devicetree/bindings/dma/qcom_bam_dma.txt | 52 ----------
> 2 files changed, 97 insertions(+), 52 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> new file mode 100644
> index 000000000000..02393ec2eedd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> @@ -0,0 +1,97 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/qcom,bam-dma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies Inc BAM DMA controller
> +
> +maintainers:
> + - Andy Gross <agross@kernel.org>
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +allOf:
> + - $ref: "dma-controller.yaml#"
> +
> +properties:
> + compatible:
> + enum:
> + - qcom,bam-v1.3.0
> + - qcom,bam-v1.4.0
> + - qcom,bam-v1.7.0
We've lost the mapping to SoCs. Please add as comments.
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: bam_clk
> +
> + "#dma-cells":
> + const: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + iommus:
> + minItems: 1
> + maxItems: 4
> +
> + num-channels:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Indicates supported number of DMA channels in a remotely controlled bam.
> +
> + qcom,controlled-remotely:
> + type: boolean
> + description:
> + Indicates that the bam is controlled by remote proccessor i.e. execution
> + environment.
> +
> + qcom,ee:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 7
> + description:
> + Indicates the active Execution Environment identifier (0-7) used in the
> + secure world.
> +
> + qcom,num-ees:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Indicates supported number of Execution Environments in a remotely
> + controlled bam.
> +
> + qcom,powered-remotely:
> + type: boolean
> + description:
> + Indicates that the bam is powered up by a remote processor but must be
> + initialized by the local processor.
> +
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - "#dma-cells"
> + - interrupts
> + - qcom,ee
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,gcc-msm8974.h>
> +
> + dma-controller@f9944000 {
> + compatible = "qcom,bam-v1.4.0";
> + reg = <0xf9944000 0x15000>;
> + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&gcc GCC_BLSP2_AHB_CLK>;
> + clock-names = "bam_clk";
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + };
> +...
> diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> deleted file mode 100644
> index 6e9a5497b3f2..000000000000
> --- a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
> +++ /dev/null
> @@ -1,52 +0,0 @@
> -QCOM BAM DMA controller
> -
> -Required properties:
> -- compatible: must be one of the following:
> - * "qcom,bam-v1.4.0" for MSM8974, APQ8074 and APQ8084
> - * "qcom,bam-v1.3.0" for APQ8064, IPQ8064 and MSM8960
> - * "qcom,bam-v1.7.0" for MSM8916
> -- reg: Address range for DMA registers
> -- interrupts: Should contain the one interrupt shared by all channels
> -- #dma-cells: must be <1>, the cell in the dmas property of the client device
> - represents the channel number
> -- clocks: required clock
> -- clock-names: must contain "bam_clk" entry
> -- qcom,ee : indicates the active Execution Environment identifier (0-7) used in
> - the secure world.
> -- qcom,controlled-remotely : optional, indicates that the bam is controlled by
> - remote proccessor i.e. execution environment.
> -- qcom,powered-remotely : optional, indicates that the bam is powered up by
> - a remote processor but must be initialized by the local processor.
> -- num-channels : optional, indicates supported number of DMA channels in a
> - remotely controlled bam.
> -- qcom,num-ees : optional, indicates supported number of Execution Environments
> - in a remotely controlled bam.
> -
> -Example:
> -
> - uart-bam: dma@f9984000 = {
> - compatible = "qcom,bam-v1.4.0";
> - reg = <0xf9984000 0x15000>;
> - interrupts = <0 94 0>;
> - clocks = <&gcc GCC_BAM_DMA_AHB_CLK>;
> - clock-names = "bam_clk";
> - #dma-cells = <1>;
> - qcom,ee = <0>;
> - };
> -
> -DMA clients must use the format described in the dma.txt file, using a two cell
> -specifier for each channel.
> -
> -Example:
> - serial@f991e000 {
> - compatible = "qcom,msm-uart";
> - reg = <0xf991e000 0x1000>
> - <0xf9944000 0x19000>;
> - interrupts = <0 108 0>;
> - clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
> - <&gcc GCC_BLSP1_AHB_CLK>;
> - clock-names = "core", "iface";
> -
> - dmas = <&uart-bam 0>, <&uart-bam 1>;
> - dma-names = "rx", "tx";
> - };
> --
> 2.25.1
>
>
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v3 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format
2022-04-17 21:04 ` [PATCH v3 6/6] dt-bindings: dma: Convert Qualcomm BAM DMA binding to json format Kuldeep Singh
2022-04-26 0:16 ` Rob Herring
@ 2022-07-21 19:52 ` Rob Herring
2022-07-22 17:31 ` Kuldeep Singh
1 sibling, 1 reply; 4+ messages in thread
From: Rob Herring @ 2022-07-21 19:52 UTC (permalink / raw)
To: Kuldeep Singh
Cc: Vinod Koul, linux-kernel, linux-arm-msm, dmaengine,
Krzysztof Kozlowski, Andy Gross, devicetree, Rob Herring,
Bjorn Andersson
On Mon, 18 Apr 2022 02:34:36 +0530, Kuldeep Singh wrote:
> Convert Qualcomm BAM DMA controller binding to DT schema format using
> json schema.
>
> Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
> ---
> v3:
> - Address Krzysztof Comments
> - qcom,ee as required property
> - Use boolean type instead of flag
> - Add min/max to qcom,ee
> - skip clocks, as it's users are not fixed
> ---
> v2:
> - Use dma-cells
> - Set additionalProperties to false
> ---
> .../devicetree/bindings/dma/qcom,bam-dma.yaml | 97 +++++++++++++++++++
> .../devicetree/bindings/dma/qcom_bam_dma.txt | 52 ----------
> 2 files changed, 97 insertions(+), 52 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/dma/qcom,bam-dma.yaml
> delete mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
>
This is the 11th most warned on (168 warnings) for missing a schema, so
I've implemented my only comment and applied. It seems neither this one
or the other attempt at converting are getting respun.
Rob
^ permalink raw reply [flat|nested] 4+ messages in thread