From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org, Vinod Koul <vkoul@kernel.org>,
Frank Li <Frank.Li@kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2 1/4] dma: fsl_raid: convert descriptor stores to big-endian
Date: Thu, 16 Jul 2026 15:49:16 -0500 [thread overview]
Message-ID: <allDzCDamp255Ea0@SMW015318> (raw)
In-Reply-To: <20260716202949.677290-2-rosenp@gmail.com>
On Thu, Jul 16, 2026 at 01:29:46PM -0700, Rosen Penev wrote:
> The descriptor structs (fsl_re_cmpnd_frame / fsl_re_hw_desc) are
> in-memory but their fields are __be32, because the structures are handed
> to the device as big-endian. The driver stored CPU-endian u32 values
> into them directly, which is both wrong (the engine would see
> byte-swapped lengths/addresses) and flagged by sparse as a base-type
> mismatch.
>
> Wrap those stores in cpu_to_be32() so the values are little->big
> converted.
>
> Reported-by: kernel test robot <lkp@intel.com>
> Fixes: https://lore.kernel.org/oe-kbuild-all/202008111749.yy85rFMD%25lkp@intel.com/
> Assisted-by: opencode:hy3-free
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/dma/fsl_raid.c | 13 +++++++------
> 1 file changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/dma/fsl_raid.c b/drivers/dma/fsl_raid.c
> index 99945845d8b5..2778d07a05e8 100644
> --- a/drivers/dma/fsl_raid.c
> +++ b/drivers/dma/fsl_raid.c
> @@ -242,9 +242,9 @@ static void fill_cfd_frame(struct fsl_re_cmpnd_frame *cf, u8 index,
> u32 efrl = length & FSL_RE_CF_LENGTH_MASK;
>
> efrl |= final << FSL_RE_CF_FINAL_SHIFT;
> - cf[index].efrl32 = efrl;
> - cf[index].addr_high = upper_32_bits(addr);
> - cf[index].addr_low = lower_32_bits(addr);
> + cf[index].efrl32 = cpu_to_be32(efrl);
> + cf[index].addr_high = cpu_to_be32(upper_32_bits(addr));
> + cf[index].addr_low = cpu_to_be32(lower_32_bits(addr));
> }
>
> static struct fsl_re_desc *fsl_re_init_desc(struct fsl_re_chan *re_chan,
> @@ -256,9 +256,10 @@ static struct fsl_re_desc *fsl_re_init_desc(struct fsl_re_chan *re_chan,
> dma_async_tx_descriptor_init(&desc->async_tx, &re_chan->chan);
> INIT_LIST_HEAD(&desc->node);
>
> - desc->hwdesc.fmt32 = FSL_RE_FRAME_FORMAT << FSL_RE_HWDESC_FMT_SHIFT;
> - desc->hwdesc.lbea32 = upper_32_bits(paddr);
> - desc->hwdesc.addr_low = lower_32_bits(paddr);
> + desc->hwdesc.fmt32 = cpu_to_be32(FSL_RE_FRAME_FORMAT <<
> + FSL_RE_HWDESC_FMT_SHIFT);
> + desc->hwdesc.lbea32 = cpu_to_be32(upper_32_bits(paddr));
> + desc->hwdesc.addr_low = cpu_to_be32(lower_32_bits(paddr));
> desc->cf_addr = cf;
> desc->cf_paddr = paddr;
>
> --
> 2.55.0
>
next prev parent reply other threads:[~2026-07-16 20:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-16 20:29 [PATCHv2 0/4] dma: fsl_raid: fix sparse warnings and simplify probing Rosen Penev
2026-07-16 20:29 ` [PATCHv2 1/4] dma: fsl_raid: convert descriptor stores to big-endian Rosen Penev
2026-07-16 20:44 ` sashiko-bot
2026-07-16 20:49 ` Frank Li [this message]
2026-07-16 20:29 ` [PATCHv2 2/4] dma: fsl_raid: set final bit via fill_cfd_frame() argument Rosen Penev
2026-07-16 20:47 ` sashiko-bot
2026-07-16 20:57 ` Frank Li
2026-07-16 20:29 ` [PATCHv2 3/4] dma: fsl_raid: keep MMIO bases as void __iomem and cast at access Rosen Penev
2026-07-16 20:44 ` sashiko-bot
2026-07-16 21:02 ` Frank Li
2026-07-16 20:29 ` [PATCHv2 4/4] dma: fsl_raid: use devm_platform_ioremap_resource Rosen Penev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=allDzCDamp255Ea0@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox